Rivet opening

Rivet opening, Total:261 items.

The international standard classification for "Rivet opening" includes: Rivets , Drills, countersinks, reamers , Fasteners , Rivets .

The Chinese standard classification for "Rivet opening" includes: Fasteners , Cutters , Fastener .

Professional Standard - Aerospace

QJ 533-1985 Rod of Pulling-Riveting Type Tensile Sealing 90° Countersunk Ring Groove Rivet
QJ 3248-2005 General specification for shear alloy steel pull-type lockbolts
QJ 1726-1989 Shell of Upsetting-rivet Type Tensile Ring Groove Rivet
QJ 395-1978 Countersunk Rivet Hole Inverse Counter Bit (Rivet Diameter = 3~ 6; Ψ = 90° or 120°)
QJ 3249.1-2005 Shear alloy steel pull-type lockbolts - Part 1: Pan head pin
QJ 528-1985 Technical Specifications for Pulling-Riveting Type Tensile Ring Groove Rivet
QJ 534-1985 Shell of Pulling-Riveting Type Tensile Ring Groove Rivet
QJ 535-1985 Pulling-Riveting Type Tensile Ring Groove Rivet - Adjusting Shim
QJ 1725-1989 Technical Specification for Upsetting-rivet Type Tensile Ring Groove Rivet with 100° Countersunk Head
QJ 399-1978 Countersunk Rivet Hole Counter Bit (Rivet Diameter = 2.5~6; Ψ = 90° or 120°)
QJ 1724-1989 Technical Specification for Upsetting-rivet Type Tensile Ring Groove Rivet Rod with Flat Taper Head
QJ 531-1985 Rod of Pulling-Riveting Type Tensile Sealing Mushroom Head Ring Groove Rivet
QJ 1723-1989 Technical Specification for Upsetting-rivet Type Tensile Ring Groove Rivet
QJ 3249.5-2005 Shear alloy steel pull-type lockbolts - Part 5: Collars
QJ 530-1985 Rod of Pulling-Riveting Type Tensile Mushroom Head Ring Groove Rivet
QJ 532-1985 Rod of Pulling-Riveting Type Tensile 90° Countersunk Ring Groove Rivet
QJ 3249.2-2005 Shear alloy steel pull-type lockbolts - Part 2: 90°countsunk head pin
QJ 3249.3-2005 Shear alloy steel pull-type lockbolts - Part 3: Seal pan head pin

Professional Standard - Aviation

HB 3833-1986 Rivet hole lead hole punch
HB 5505-1980 90° countersunk head pull ring groove rivets
HB 5511-1983 High tensile strength type ring grooved rivet collar
HB 5844-1983 Brushed 100° countersunk head aluminum blind rivets
HB 3829-1986 Anchor locknut rivet hole drilling jig
HB 6847-1993 Pull Type Mushroom Tensile Titanium Alloy Lockbolt
HB 5511-1980 Tensile ring groove rivet set
HB 5506-1980 Flat round head pull ring groove rivets
HB 6848-1993 Upsetting Mushoroom Tensile Titanium Alloy Lockbolts
HB 5845-1983 Wire-drawing Bulbed Aluminium Rivet with Flat Conical Head
HB 5510-1980 Tensile ring groove rivet set
HB 1-603-1974 Flat cone head blind hole threaded hollow rivets
HB 6849-1993 100° Pull Type Countersunk Tensile Titanium Alloy Lockbolts
HB 1-603-1983 Flat cone head blind hole thread hollow rivets
HB 5506-1983 Flat Round Head High Tensile Ring Grooved Rivet
HB 5510-1983 High tensile strength type ring grooved rivet collar
HB 5505-1983 90℃ountersunk Head High Tensile Strength Ring-grooved Rivet
HB 5892-1985 Blind Steel Rivets-Drawing, 100° Head
HB 6850-1993 100° Upsetting Countersunk Tensile Titanium Alloy Lockbolts
HB 5893-1985 Blind Steel Rivets-Drawing, Protruding Head

Military Standard of the People's Republic of China-General Armament Department

GJB 857.2-1990 Flat head tensile titanium alloy ring groove rivets
GJB 133.9-1986 Brushed type 100° countersunk head blind rivet set
GJB 381.11-1987 Tensile ring groove rivet set
GJB 133.2-1986 Brushed type 100° countersunk head blind rivets
GJB 133.10-1986 Brushed flat cone head blind rivet set
GJB 381.10-1987 Tensile ring groove rivet set
GJB 381.6-1987 Flat round head tensile ring groove rivets
GJB 133.4-1986 Brushed flat cone head blind rivets
GJB 133.8-1986 Technical specifications of brushed blind rivets
GJB 133.3-1986 Brushed flat cone head blind rivets
GJB 857.3-1990 Tensile titanium alloy ring groove rivet set
GJB 133.1-1986 Brushed type 100° countersunk head blind rivets
GJB 381.5-1987 100° countersunk head tensile ring groove rivets

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12617-1990 120 deg flush head break mandrel blind rivets
GB 152.1-1988 Through Holes for Fastener Rivets
GB 12617-1990 Open type countersunk head blind rivets
GB/T 12618-1990 Mushroom head break mandrel blind rivets
GB/T 152.1-1988 Fasteners-Clearance holes for rivets

Professional Standard - Machinery

JB/T 5192.1-1991 Matching dimensions and limit deviations of mechanical riveting parts Riveting of cylindrical rivets and countersunk rivets with connecting holes
JB/T 7384.17-1994 Fasteners Plug gauges for pore depth of rivets
JB/T 7384.16-1994 Fasteners Plug gauges for bore size of rivets

Taiwan Provincial Standard of the People's Republic of China

CNS 257-1952 Boiler Rivet Hole Reamer, with Square Head
CNS 256-1981 Machine Bridge Reamers with Morse Tapers

AIA/NAS - Aerospace Industries Association of America Inc.

NAS9315-1998 Rivet@ Blind@ Spindle Pulling Serrations@ Dimensions for
NASM20600-1999 Rivet@ Blind@ Structural Pull Stem@ Self-Plugging@ Protruding Head@ Type II
NAS9315-2010 RIVET@ BLIND@ SPINDLE@ PULLING SERRATIONS@ DIMENSIONS FOR (Rev 1)
NAS9315-2014 RIVET@ BLIND@ SPINDLE@ PULLING SERRATIONS@ DIMENSIONS FOR (Rev 2)
NASM20601-1999 Rivet@ Blind@ Structural Pull Stem@ Self-Plugging@ 100 Degree Flush Head@ Type II
NASM20600-2011 RIVET@ BLIND@ STRUCTURAL PULL STEM@ SELF-PLUGGING@ PROTRUDING HEAD@ TYPE II (Rev 1)
NASM20601-2011 RIVET@ BLIND@ STRUCTURAL@ PULL STEM@ SELF-PLUGGING@ 100° FLUSH HEAD@ TYPE II (Rev 1)
NASM20601-2016 RIVET@ BLIND@ STRUCTURAL@ PULL STEM@ SELF-PLUGGING@ 100° FLUSH HEAD@ TYPE II (Rev 2)
NASM24662-1999 Rivet@ Blind - Universal Head@ Drive Type
NAS454-1951 Rivet-Blind Csk Head (Self Plugging Type) (Rev 1)
NASM24661-2012 RIVET@ BLIND@ COUNTERSUNK HEAD@ DRIVE TYPE (Rev 1)
NASM27384-2016 RIVET@ BLIND@ DRIVE TYPE (Rev 2)
NASM20604-1998 Rivet@ Blind@ Nonstructural@ Universal Head@ Class 1

Aerospace Industries Association

AIA NAS 9315-1998 Rivet, Blind, Spindle Pulling Serrations, Dimensions for
AIA NASM20600-1999 Rivet, Blind, Structural Pull Stem, Self-Plugging, Protruding Head, Type II FSC 5320
AIA NASM20601-1999 Rivet, Blind, Structural Pull Stem, Self-Plugging, 100 Degree Flush Head, Type II FSC 5320
AIA NASM27384-1999 Rivet, Blind, Drive Type FSC 5320

IT-UNI

UNI 141-1931 Hot rivet holes
UNI 6413-1969 Aluminum rivets and aluminum alloy rivets for ships. Nail holes and rivets
UNI 7591-1976 Round head slotted rivets
UNI 7592-1976 Flat bell head slotted rivets

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS9315-2014 RIVET, BLIND, SPINDLE, PULLING SERRATIONS, DIMENSIONS FOR (Rev 2)
AIA/NAS NAS9315-2010 RIVET, BLIND, SPINDLE, PULLING SERRATIONS, DIMENSIONS FOR Rev 1
AIA/NAS NASM27384-2011 RIVET, BLIND, DRIVE TYPE
AIA/NAS NASM20600-2014 RIVET, BLIND, STRUCTURAL PULL STEM, SELF-PLUGGING, PROTRUDING HEAD, TYPE II (Rev 2)
AIA/NAS NASM24661-2012 RIVET, BLIND, COUNTERSUNK HEAD, DRIVE TYPE
AIA/NAS NASM27384-2016 RIVET, BLIND, DRIVE TYPE (Rev 2)
AIA/NAS NAS2015-2022-2015 PIN-RIVET, GROOVED, TITANIUM (COMPOSITE APPLICATIONS) PROTRUDING HEAD, PULL-TYPE (Rev 2)
AIA/NAS NAS2015-2022-2011 PIN-RIVET, GROOVED, TITANIUM (COMPOSITE APPLICATIONS) PROTRUDING HEAD, PULL-TYPE (Rev 1)
AIA/NAS NASM20601-2016 RIVET, BLIND, STRUCTURAL, PULL STEM, SELF-PLUGGING, 100° FLUSH HEAD, TYPE II (Rev 2)
AIA/NAS NASM20601-2011 RIVET, BLIND, STRUCTURAL, PULL STEM, SELF-PLUGGING, 100° FLUSH HEAD, TYPE II (Rev 1)
AIA/NAS NASM20605-2011 RIVET, BLIND, NONSTRUCTURAL, 100° FLUSH HEAD

PT-IPQ

NP 252-1961 FUROS PARA REBITES

CZ-CSN

CSN 02 2108-1973 Clevis pins with tolerances f 8 and holes for split pins
CSN 02 2106-1973 Clevis pins with tolerances h 11 and holes for split pins
CSN 02 2331-1967 Centre-drilled flat head rivets
CSN 22 1452-1988 Rivet hole machine reamers with taper shank. Basic dimensions

American National Standards Institute （ANSI)

ANSI/ASME B18.7-2007 General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets, and Rivet Caps

SE-SIS

SIS SMS 820-1949 Rivet hole reamer
SIS SS 1662-1983 Split rivets with mushroom head

RO-ASRO

STAS 1257-1980 Steel rivets HALF-COUNTERSUNTK SMALL RIVET Dimensions
STAS 590-1973 REAMERS FOR RIVET HOLES Dimensions
STAS 12668-1988 BLIND RIVETS WITH BREAK MANDREL

Korean Agency for Technology and Standards (KATS)

KS W 1630-2005(2020) Small solid rivet, small split rivet, small tubular rivet
KS B ISO 15977-2019 Open end blind rivets with break pull mandrel and protruding head－AlA/St
KS B ISO 15979-2019 Open end blind rivets with break pull mandrel and protruding head－St/St
KS B ISO 15981-2019 Open end blind rivets with break pull mandrel and protruding head－AlA/AlA
KS B ISO 16584-2019 Open end blind rivets with break pull mandrel and protruding head－NiCu/St or NiCu/SSt
KS B ISO 15980-2004(2019) Open end blind rivets with break pull mandrel and countersunk head－St/St
KS B ISO 15984-2019 Open end blind rivets with break pull mandrel and countersunk head－A2/A2
KS B ISO 15982-2004(2019) Open end blind rivets with break pull mandrel and countersunk head－AlA/AlA
KS B ISO 15978-2004(2019) Open end blind rivets with break pull mandrel and countersunk head－AlA/St
KS B ISO 15982-2019 Open end blind rivets with break pull mandrel and countersunk head－AlA/AlA
KS B ISO 15980-2019 Open end blind rivets with break pull mandrel and countersunk head－St/St
KS B ISO 15984-2004(2019) Open end blind rivets with break pull mandrel and countersunk head－A2/A2
KS B ISO 15978-2019 Open end blind rivets with break pull mandrel and countersunk head－AlA/St

German Institute for Standardization

DIN 9118-1:1987-11 Aerospace; rivet holes
DIN 1863:1962-01 Countersinks for Countersunk Head Rivets
DIN EN ISO 15977:2011-02 Open end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15977:2002); German version EN ISO 15977:2002
DIN 311:1975 Bridge Reamers with Morse Taper Shank
DIN EN ISO 15980:2003-04 Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002); German version EN ISO 15980:2002
DIN EN ISO 15981:2003-04 Open end blind rivets with break pull mandrel and protruding head - AlA/AlA (ISO 15981:2002); German version EN ISO 15981:2002
DIN EN ISO 15984:2003-04 Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002); German version EN ISO 15984:2002
DIN EN ISO 15983:2003-04 Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002); German version EN ISO 15983:2002
DIN EN ISO 15982:2003-04 Open end blind rivets with break pull mandrel and countersunk head - AlA/AlA (ISO 15982:2002); German version EN ISO 15982:2002
DIN EN ISO 15979:2003-04 Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002); German version EN ISO 15979:2002
DIN EN ISO 15978:2003-04 Open end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15978:2002); German version EN ISO 15978:2002
DIN 9118-1:1987 Aerospace; rivet holes
DIN 7339:2011 Hollow rivets, one piece, drawn from strip
DIN 7339:1993 Tubular rivets (one piece) drawn from strip

American Society of Mechanical Engineers (ASME)

ASME B18.7-1972 General purpose semi-tubular rivets, full tubular rivets, split rivets and rivet caps
ASME B18.7-1966 General Purpose Semi Tubular Rivets, Full Tubular Rivets, Split Rivits, and End Caps
ASME B18.7-2007 General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets and End Caps
ASME B18.7-2007(R2017) General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets, & End Caps

Danish Standards Foundation

DS/EN 2309:1989 Aerospace series. Hole sizes for solid rivets
DS/EN ISO 15978:2003 Open end blind rivets with break pull mandrel and countersunk head - AIA/St
DS/EN ISO 15980:2003 Open end blind rivets with break pull mandrel and countersunk head - St/St
DS/EN ISO 15982:2003 Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA
DS/EN ISO 15984:2003 Open end blind rivets with break pull mandrel and countersunk head - A2/A2
DS/EN ISO 15977:2003 Open end blind rivets with break pull mandrel and protruding head - AIA/St
DS/EN ISO 15979:2003 Open end blind rivets with break pull mandrel and protruding head - St/St
DS/EN ISO 15981:2003 Open end blind rivets with break pull mandrel and protruding head - AIA/AIA
DS/EN ISO 15983:2003 Open end blind rivets with break pull mandrel and protruding head - A2/A2
DS/EN ISO 16584:2003 Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt
DS/EN ISO 16583:2003 Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt

IFI/FASTNR - Industrial Fastener Institute

530-1982 Metric Structural Splitting Self Plugging Pull Mandrel Blind Rivets
530-1999 Metric Structural Splitting Self Plugging Pull Mandrel Blind Rivets (3rd Edition)
117-1986 Pull Through Mandrel Blind Rivets
520-1982 Metric Pull Through Mandrel Blind Rivets

Association Francaise de Normalisation

NF E66-016:1977 Machine bridge reamers.
NF R93-508:1943 Split tubular rivets from 2.5 to 5 mm.
NF E25-701:1988 Fasteners. Open-end blind rivets with break shank (aluminium-steel). Properties. Test methods.
NF E25-702:1988 Fasteners. Open-end blind rivets with break shank, from steel. Properties. Test methods.

SCC

ASME B18.7-2007(R2022) General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets, and End Caps
DANSK DS/EN ISO 15979:2003 Open end blind rivets with break pull mandrel and protruding head - St/St
DANSK DS/EN ISO 15983:2003 Open end blind rivets with break pull mandrel and protruding head - A2/A2
DANSK DS/EN ISO 15982:2003 Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA
DANSK DS/EN ISO 15977:2003 Open end blind rivets with break pull mandrel and protruding head - AIA/St
DANSK DS/EN ISO 15981:2003 Open end blind rivets with break pull mandrel and protruding head - AIA/AIA
DANSK DS/EN ISO 15978:2003 Open end blind rivets with break pull mandrel and countersunk head - AIA/St
DANSK DS/EN ISO 15984:2003 Open end blind rivets with break pull mandrel and countersunk head - A2/A2
DANSK DS/EN ISO 15980:2003 Open end blind rivets with break pull mandrel and countersunk head - St/St
BS 7349-2:1993 Blind rivets with break mandrel-Specification for open end blind rivets
AENOR UNE-EN ISO 15981:2003 Open end blind rivets with break pull mandrell and protruding head. AIA/AIA (ISO 15981:2002)
NS-EN ISO 15978:2002 Open end blind rivets with break pull mandrel and countersunk head — AIA/St (ISO 15978:2002)
NS-EN ISO 15982:2002 Open end blind rivets with break pull mandrel and countersunk head — AIA/AIA (ISO 15982:2002)
NS-EN ISO 15984:2002 Open end blind rivets with break pull mandrel and countersunk head — A2/A2 (ISO 15984:2002)
NS-EN ISO 15980:2002 Open end blind rivets with break pull mandrel and countersunk head — St/St (ISO 15980:2002)
NS-EN ISO 15979:2002 Open end blind rivets with break pull mandrel and protruding head — St/St (ISO 15979:2002)
AENOR UNE-EN ISO 15979:2003 Open end blind rivets with break pull mandrel and protruding head. St/St (ISO 15979:2002)
AENOR UNE-EN ISO 15983:2003 Open end blind rivets with break pull mandrel and protruding head. A2/A2 (ISO 15983:2002)
DANSK DS/EN ISO 16584:2003 Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt
AENOR UNE-EN ISO 15977:2003 Open end blind rivets with break pull mandrel and protruding head. AIA/St (ISO 15977:2001)
NS-EN ISO 15981:2002 Open end blind rivets with break pull mandrel and protruding head — AIA/AIA (ISO 15981:2002)
NS-EN ISO 15983:2002 Open end blind rivets with break pull mandrel and protruding head — A2/A2 (ISO 15983:2002)
AENOR UNE-EN ISO 15980:2003 Open end blind rivets with break pull mandrel and countersunk head. St/St (ISO 15980:2002)
AENOR UNE-EN ISO 15984:2003 Open end blind rivets with break pull mandrel and countersunk head. A2/A2 (ISO 15984:2002)
AENOR UNE-EN ISO 15978:2003 Open end blind rivets with break pull mandrel and countersunk head. AIA/St (ISO 15978:2002)
ASME B18.7-1972(R2005) General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Spit Rivets and Rivet Caps
NS-EN ISO 15977:2002 Open end blind rivets with break pull mandrel and protruding head — AIA/St (ISO 15977:2002)

European Committee for Standardization (CEN)

EN 23016:1989 Hole Sizes for Solid Rivets
EN ISO 15976:2002 Closed end blind rivets with break pull mandrel and protrudiing head - St/St ISO 15976: 2002
EN ISO 15982:2002 Open end blind rivets with break pull mandrel and countersunk head AIA/AIA
EN ISO 15983:2002 Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002)
EN ISO 15979:2002 Open end blind rivets with break pull mandrel and protruding head St/St
EN ISO 15978:2002 Open end blind rivets with break pull mandrel and countersunk head AIA/St
EN ISO 15984:2002 Open end blind rivets with break pull mandrel and countersunk head A2/A2
EN ISO 15977:2002 Open end blind rivets with break pull mandrel and protruding head AIA/St
EN ISO 15981:2002 Open end blind rivets with break pull mandrel and protruding head AIA/AIA
EN ISO 15980:2002 Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002)
EN 2309:1989 Aerospace series Hole sizes for solid rivets
EN ISO 16584:2002 Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt

GSO

OS GSO ISO 15981:2013 Open end blind rivets with break pull mandrel and protruding head -- AIA/AIA
BH GSO ISO 15984:2016 Open end blind rivets with break pull mandrel and countersunk head -- A2/A2
BH GSO ISO 15981:2016 Open end blind rivets with break pull mandrel and protruding head -- AIA/AIA
OS GSO ISO 15984:2013 Open end blind rivets with break pull mandrel and countersunk head -- A2/A2
GSO ISO 15983:2014 Open end blind rivets with break pull mandrel and protruding head -- A2/A2
GSO ISO 15982:2013 Open end blind rivets with break pull mandrel and countersunk head -- AIA/AIA
GSO ISO 15978:2013 Open end blind rivets with break pull mandrel and countersunk head -- AIA/St
BH GSO ISO 15978:2016 Open end blind rivets with break pull mandrel and countersunk head -- AIA/St
OS GSO ISO 15982:2013 Open end blind rivets with break pull mandrel and countersunk head -- AIA/AIA
GSO ISO 15984:2013 Open end blind rivets with break pull mandrel and countersunk head -- A2/A2
GSO ISO 15979:2014 Open end blind rivets with break pull mandrel and protruding head -- St/St
GSO ISO 15980:2013 Open end blind rivets with break pull mandrel and countersunk head -- St/St
BH GSO ISO 15977:2016 Open end blind rivets with break pull mandrel and protruding head -- AIA/St
OS GSO ISO 15979:2014 Open end blind rivets with break pull mandrel and protruding head -- St/St
BH GSO ISO 15979:2016 Open end blind rivets with break pull mandrel and protruding head -- St/St
OS GSO ISO 15977:2013 Open end blind rivets with break pull mandrel and protruding head -- AIA/St
OS GSO ISO 15983:2014 Open end blind rivets with break pull mandrel and protruding head -- A2/A2
OS GSO ISO 15980:2013 Open end blind rivets with break pull mandrel and countersunk head -- St/St
GSO ISO 15977:2013 Open end blind rivets with break pull mandrel and protruding head -- AIA/St
GSO ISO 15981:2013 Open end blind rivets with break pull mandrel and protruding head -- AIA/AIA
BH GSO ISO 16584:2016 Open end blind rivets with break pull mandrel and protruding head -- NiCu/St or NiCu/SSt
GSO ISO 16584:2013 Open end blind rivets with break pull mandrel and protruding head -- NiCu/St or NiCu/SSt

British Standards Institution (BSI)

BS EN ISO 15982:2002(2004) Open end blind rivets with break pull mandrel and countersunk head — AIA / AIA
BS EN ISO 15984:2002(2004) Open end blind rivets with break pull mandrel and countersunk head — A2 / A2
BS EN ISO 14589:2001 Blind rivets. Mechanical testing
BS EN ISO 15979:2002(2004) Open end blind rivets with break pull mandrel and protruding head — St / St
BS EN ISO 15978:2002(2004) Open end blind rivets with break pull mandrel and countersunk head — AIA / St
BS EN ISO 15983:2002(2004) Open end blind rivets with break pull mandrel and protruding head — A2 / A2
BS EN ISO 15980:2002(2004) Open end blind rivets with break pull mandrel and countersunk head — St / St
BS EN ISO 15981:2002(2004) Open end blind rivets with break pull mandrel and protruding head — AIA / AIA
BS EN ISO 15977:2002(2004) Open end blind rivets with break pull mandrel and protruding head — AIA / St
BS EN 2309:1990(1999) Specification for Hole sizes for solid rivets
BS EN ISO 14588:2001 Blind rivets. Terminology and definitions
BS EN 2309:1990 Specification for hole sizes for solid rivets

Standard Association of Australia （SAA）

AS B22:1932 Rolled copper bars for stays and rivets; and manufactured rivets

Society of Automotive Engineers (SAE)

SAE RS-733-1-1975 RS733 Hole Sizes for Solid Rivets
SAE AS3228B-2019 RIVET - TUBULAR, COUNTERSUNK, AS7228
SAE AS3230A-2012 RIVET - TUBULAR, COUNTERSUNK, AS7232
SAE AS3230-2011 RIVET - TUBULAR, COUNTERSUNK, AMS 7232
SAE AS3228-2011 RIVET -TUBULAR, COUNTERSUNK, AMS 7228
SAE AS3228A-2012 RIVET – TUBULAR, COUNTERSUNK, AS7228
SAE AGS2039-3-1958 AGS2039 Rivets, Blind, A.G.S. (Chobert and Tucker), Application
SAE AS3230A-1996 Rivet - Tubular, Countersunk, AS 7232 FSC 5320

United States Navy

NAVY AN425 REV 2-1943 RIVET - 78 DEG. COUNTERSUNK HEAD

Lithuanian Standards Office

LST EN ISO 15980:2003 Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002)
LST EN ISO 15984:2003 Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)
LST EN ISO 15982:2003 Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA (ISO 15982:2002)
LST EN ISO 15978:2003 Open end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15978:2002)
LST EN ISO 15983:2003 Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002)
LST EN ISO 15979:2003 Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002)
LST EN ISO 15977:2003 Open end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15977:2002)
LST EN ISO 15981:2003 Open end blind rivets with break pull mandrel and protruding head - AIA/AIA (ISO 15981:2002)

SAE - SAE International

SAE AS3228A-1996 Rivet - Tubular@ Countersunk@ AS 7228
SAE AS85188-2002 Riveter@ Power@ Pneumatic-Hydraulic Blind Rivet Installation
SAE AS85188A-2013 Riveter@ Power@ Pneumatic-Hydraulic Blind Rivet Installation

Spanish Association for Standardization (UNE)

UNE-EN ISO 15980:2003 Open end blind rivets with break pull mandrel and countersunk head. St/St (ISO 15980:2002)
UNE-EN ISO 15984:2003 Open end blind rivets with break pull mandrel and countersunk head. A2/A2 (ISO 15984:2002)
UNE-EN ISO 15983:2003 Open end blind rivets with break pull mandrel and protruding head. A2/A2 (ISO 15983:2002)
UNE-EN ISO 15979:2003 Open end blind rivets with break pull mandrel and protruding head. St/St (ISO 15979:2002)
UNE-EN 2309:1992 AEROSPACE SERIES. HOLE SIZES FOR SOLID RIVETS.
UNE-EN ISO 15978:2003 Open end blind rivets with break pull mandrel and countersunk head. AIA/St (ISO 15978:2002)