Calibration of Carbonation Depth Gauge

Calibration of Carbonation Depth Gauge, Total:60 items.

The international standard classification for "Calibration of Carbonation Depth Gauge" includes: Linear and angular measurements , Heat treatment and coating , Exploratory and extraction equipment .

The Chinese standard classification for "Calibration of Carbonation Depth Gauge" includes: Radio Measurement , Length Measurement , Heat treatment , Petroleum exploration logging equipment and instrument .

National Metrological Technical Specifications of the People's Republic of China

JJF 1801-2020 Calibration Specification for Linear Velocity Measuring Instrument
JJF(机械)1078-2021 Calibration specifications for bearing ring width and oil groove depth measuring instruments
JJF 1111-2003 Calibration Specification for Modulation Meters
JJF 1965-2022 Calibration Specification for Solder Paste Inspection Instruments
JJF 2185-2025 Calibration Specification for Automatic Measuring Instruments of Tire Pattern Depth of Motor Vehicles
JJF 1334-2012 Calibeation Specification for Concrete Crack Width and Depth Measuring Instruments
JJF 2247-2025 Calibration Specification for Well Water Level Burial Depth Measuring Instruments
JJF 2246-2025 Calibration Specification for Well Water Temperature Measuring Instruments
JJF 1852-2020 Calibration Specification for Distortion Meters
JJF 1105-2003 Calibration Specification for Contact (Stylus) Instruments of Surface Roughness Measurement by the Profile Method
JJF 1309-2011 Calibration Specification of Temperature Indicators and Simulators by Electrical Simulation and Measurement
JJF 1659-2017 Calibration Specification for PM2.5 Mass Concentration Measurement Instruments
JJF 1890-2021 Calibration Specification for Straightness Measuring Devices
JJF 1571-2016 Calibration Specification for Seawater Turbidity Analyzers
JJF(机械) 1078-2021 Calibration specification for bearing ring width and oil groove depth measuring instrument
JJF 1721-2018 Calibration Specification for Carbonization Depth Measuring Instruments and Calipers
JJF 1113-2004 Calibration Specification of Angle Measuring Instrument for Bearing Ring
JJF(纺织) 030-2006 Specifications for Calibration of Whiteness Meter

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9450-1988 Determination and verification of the effective depth of carburized and hardened cases of steel parts
GB/T 9450-2005 Steels—Determination and verification of the depth of carburized and hardened cases

Taiwan Provincial Standard of the People's Republic of China

CNS 10168-1983 Methods of Measuring Case Depth for Steel

Professional Standard - Petroleum

SY/T 6579-2003 The calibration method for density tool

Danish Standards Foundation

DS/CEN/CR 12793:1997 Measurement of the carbonation depth of hardened concrete
DANSK DS/CEN/CR 12793:1997 Measurement of the carbonation depth of hardened concrete

European Committee for Standardization (CEN)

CR 12793:1997 Measurement of the carbonation depth of hardened concrete

Korean Agency for Technology and Standards (KATS)

KS F 2596-2019(2024) Standard test method for measuring carbonation depth of concrete
KS F 2596-2019 Standard test method for measuring carbonation depth of concrete
KS D 0216-2020 Methods of measuring decarburized depth for steel
KS F 2596-2004 Method for measuring carbonation depth of concrete
KS B ISO 4366:2004 Echo sounders for water depth measurements
KS B ISO 4366:2015 Echo sounders for water depth measurements
KS B ISO 4366:2014 Echo sounders for water depth measurements

Japanese Industrial Standards Committee (JISC)

JIS A 1152:2011 Method for measuring carbonation depth of concrete
JIS G 0557:1996 Methods of measuring case depth hardened by carburizing treatment for steel
JIS A 1152:2002 Method for measuring carbonation depth of concrete
JIS G 0557:2006 Methods of measuring case depth hardened by carburizing treatment for steel
JIS G 0557:2019 Methods of measuring case depth hardened by carburizing treatment for steel
JIS A 1152:2018 Method for measuring carbonation depth of concrete
JIS M 7605:1993 Detector tube type carbon monoxide measuring instruments (Colour-intensity)
JIS G 0558:1998 Methods of measuring decarburized depth for steel
JIS M 7650:1993 Detector tube type carbon monoxide measuring instruments (Length-of-stain)

Yugoslav Association for Standardization

JUS C.A2.052-1978 Thermal treatment of steel SURFACE TEMPERING Determination of the effective depth of the hardened layer of carbon steel

Association Francaise de Normalisation

NF E11-096:1987 Length measuring instruments. Depth gauges.

Magyar Szabványügyi Testület

MNOSZ 15583-1953 Depth measuring instrument with gauge

Swiss Association for Standardization (SNV)

SNV 81160-1945 Technical drawings — Dimensioning — General principles, definitions, methods of execution and special indications

Bureau of Indian Standards

IS 6396-1983 Method for measuring decarburization depth of steel

American Society for Testing and Materials (ASTM)

ASTM D6318-24 Standard Practice for Calibrating a Fathometer Using a Bar Check Method
ASTM D6318-03 Standard Practice for Calibrating a Fathometer Using a Bar Check Method

Association of German Mechanical Engineers

VDI/VDE 2655 Blatt 1.1-2008 Optical measurement and microtopographies - Calibration of interference microscopes and depth measurement standards for roughness measurement
VDI/VDE 5585 BLATT 2-2021 Technical temperature measurement - temperature measurement with thermographic cameras - calibration
VDI VDE DGQ DKD 2622 Blatt 2-1-2011 Calibration of measuring equipment for electrical quantities - Methods for the determination of measurement uncertainty
VDI/VDE 2655 Blatt 1.2-2010 Optical measurement of microtopography - Calibration of confocal microscopes and depth setting standards for roughness measurement
VDI VDE DGQ DKD 2622 Blatt-11 E:1998-12 VDI/VDE/DGQ/DKD Guidelines Sheet 11: Calibration of measuring equipment for electrical quantities
VDI VDE 2602 Blatt 4-2014 Surface measurement - Roughness measurement using contact (stylus) instruments - Calibration, uncertainty of measurement
VDI/VDE 2655 Blatt 1.2-2009 Optical measurement of microtopography - Calibration of confocal microscopes and depth setting standards for roughness measurements

Swedish Institute for Standards

SIS SS 13 72 42-1988 Concrete testing - Hardened concrete - Depth of carbonation
SS 137242:1987 Concrete testing - Hardened concrete - Depth of carbonation

American Gear Manufacturers Association

AGMA 2113-A97-1997 Measuring Instrument Calibration, Gear Tooth Alignment Measurement

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 4366:2009 Hydrometry - Echo sounders for water depth measurements

International Organization for Standardization (ISO)

ISO 4366:1979 Echo sounders for water depth measurements

Others: