Soil potential gradient test method

Soil potential gradient test method, Total:431 items.

The international standard classification for "Soil potential gradient test method" includes: Protection against dangerous goods , Soil quality and pedology in general .

The Chinese standard classification for "Soil potential gradient test method" includes: Marking, packaging, transport and storage in general , Soil and fertilizer in general .

未注明发布机构

AS 1289.6.4.1:2016 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water p
AS 1289.6.3.1:2004(R2016) Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Standard penetration test (SPT)
AS 1289.5.5.1:1998(R2016) Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method
AS 1289.3.8.3:2014/Amdt 1:2015 Methods of testing soils for engineering purposes - Soil classification tests - Dispersion - Determination of pinhole dispersion classification of a soil
ASTM RR-G01-1023 2009 G0200- Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil
AS 1289.6.1.1:2014(R2017) Methods of testing soils for engineering purposes, Method 6.1.1: Soil strength and consolidation tests — Determination of the California Bearing Ratio of a soil — Standard laboratory method for a remoulded specimen
AS 1289.3.1.1:2009(R2017) Soil test methods for engineering use. Soil classification test. Determination of soil liquid limit. Four-point Casagrande method.
AS 1289.3.4.1:2008(R2016) Soil Test Methods for Engineering Soil Classification Tests Standard Method for Determination of Linear Shrinkage of Soils
AS 1289.2.1.4:2005(R2016) Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Microwave-oven drying method (subsidiary method)
AS 1289.6.4.2:2016 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a saturated specimen tested in undrained triaxial compression with measurement of pore
AS 1289.2.1.5:2005(R2016) Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Infrared lights method (subsidiary method)
AS 1289.3.8.3:2014(R2015) Methods of testing soils for engineering purposes - Soil classification tests - Dispersion - Determination of pinhole dispersion classification of a soil
AATCC TM215-2023 Test Method for Soil Release: Household Soils
AS 1289.5.3.1:2004(R2016) Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus
ASTM RR-D18-1024 2018 D8167-Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth) and In-Place Water Mass Per Unit Volume of Soil and Soil-Aggregate by Permittivity Method (Shallow Depth)
AS 1289.5.8.4:2009(R2012) Soil Testing Methods for Engineering Soil Compaction and Density Testing Nuclear Surface Moisture Densitometer Calibration Using Standard Blocks
ASTM RR-D18-1011 2005 D4253-Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
ASTM RR-G01-1022 2004 G0187- Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
AS 1289.5.6.1:1998(R2016) Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material
DIN EN 16502 E:2012-12 Test method for the determination of the degree of soil acidity according to Baumann-Gully

Professional Standard - Environmental Protection

HJ 962-2018 Soil - Determination of pH - Potentiometry
HJ 746-2015 Soil- Determination of redov potential - Potential method

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 602.10-2001 The determinanation of soil particle siensite in soil

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 42488-2023 Soil quality—Determination of nitrogen-15 abundance of inorganic nitrogen in soil—Stable isotope ratio mass spectrometry
GB/T 27845-2011 Chemicals—Test method for particle-size analysis of soils

NZ-SNZ

NZS 4402.5.1.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.1: Sand Replacement Method for the Determination of the In Situ Density
NZS 4402.5.1.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.2: Balloon Densometer Method for the Determination of the In Situ Density
NZS 4402.5.1.4:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.4: Immersion in Water Method
NZS 4402.5.1.5:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.5: Water Displacement Method
NZS 4402.6.1.3:1986 Methods of Testing Soils for Civil Engineering Purposes Part 6.1: Soil Strength Tests - Determination of the California Bearing Ratio (CBR) Test 6.1.3: Standard Method for In Situ Tests
NZS 4402.5.1.3:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Sensity of Soil Test 5.1.3: Sampling Tube Method for the Determination of the In Situ Density
NZS 4402.2.7.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.7: Soil Classification Tests - Determination of the Solid Density of Soil Particles Test 2.7.1: Method for Coarse, Medium and Fine Soils
NZS 4402.2.7.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests - Determination of the Solid Density of Soil Particles Test 2.7.2: Method for Medium and Fine Soils
NZS 4402.6.5.1:1988 Methods of Testing Soils for Civil Engineering Purposes Part 6.5: Soil Strength Tests - Determination of the Penetration Resistance of Soil Test 6.5.1: Standard Penetration Test (SPT)
NZS 4402.6.3.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 6.3: Soil Strength Tests - Determination of the Unconfined Compressive Strength of Cohesive Soil Test 6.3.1: Standard Method Using Laboratory Apparatus
NZS 4402.3.3.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 3.3: Soil Chemical Tests - Determination of the pH Value Test 3.3.1: Standard Method (Electrometric)
NZS 4402.6.3.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 6.3: Soil Strength Tests - Determination of the Unconfined Compressive Strength of Cohesive Soil Test 6.3.2: Alternative Method Using Autographic Apparatus
NZS 4402.2.8.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle-Size Distribution Test 2.8.1: Standard Method by Wet Sieving
NZS 4402:1986 METHODS OF TESTING SOILS FOR CIVIL ENGINEERING PURPOSES
NZS 4402.2.8.4:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle-Size Distribution Test 2.8.4: Subsidiary Method for Fine Soils (Hydrometer Method)
NZS 4402.2.8.3:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle-Size Distribution Test 2.8.3: Standard Method for Fine Soils (Pipette Method)
NZS 4402.2.5:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.5: Determination of the Cone Penetration Limit
NZS 4402.6.5.2:1988 Methods of Testing Soils for Civil Engineering Purposes Part 6.5: Soil Strength Tests - Determination of the Penetration Resistance of a Soil Test 6.5.2: Hand Method Using a Dynamic Cone Penetrometer
NZS 4402.2.8.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle-Size Distribution Test 2.8.2: Subsidiary Method by Dry Sieving
NZS 4402.4.2.2:1988 Methods of Testing soils for Civil Engineering Purposes Part 4.2: Soil Compaction Tests - Determination of the Minimum and Maximum Dry Densities and Relative Density of a Cohesionless Soil Test 4.2.2: Maximum Dry Density
NZS 4402.4.2.3:1988 Methods of Testing Soils for Civil Engineering Purposes Part 4.2: Soil Compaction Tests - Determination of the Minimum and Maximum Dry Densities and Relative Density of a Cohesionless Soil Test 4.2.3: Relative Density
NZS 4402.4.2.1:1988 Methods of Testing Soils for Civil Engineering Purposes Part 4.2: Soil Compaction Tests - Determination of the Minimum and Maximum Dry Densities and Relative Density of a Cohesionless Soil Test 4.2.1: Minimum Dry Density
NZS 4402.6.2.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 6.2: Soil Strength Tests - Determination of the Compressive Strength of Specimens Tested in Undrained Triaxial Compression Test 6.2.1: Method without Measurement of Pore Water Pressure
NZS 4402.3.3.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 3.3: Soil Chemical Tests - Determination of the pH Value Test 3.3.2: Subsidiary Method (Colorimetric)
NZS 4402.6.5.3:1988 Methods of Testing Soils for Civil Engineering Purposes Part 6.5: Soil Strength Tests - Determination of the Penetration Resistance of a Soil Test 6.5.3: Cone Penetration Resistance Using a Cone or a Friction Cone
NZS 4402.2.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.2: Determination of the Liquid Limit
NZS 4402.3.4:1986 Methods of Testing Soils for Civil Engineering Purposes Part 3: Soil Chemical Tests Test 3.4: Detection of Presence of Allophane in Soils
NZS 4402.4.1.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 4.1: Soil Compaction Tests - Determination of the Dry Density/Water Content Relationship Test 4.1.2: New Zealand Heavy Compaction Test
NZS 4402.2.3:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.3: Determination of the Plastic Limit
NZS 4402.2.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.1: Determination of the Water Content

American Society for Testing and Materials (ASTM)

ASTM D7830/D7830M-14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D7830/D7830M-14(2021)e1 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D8167/D8167M-18 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
ASTM D7830/D7830M-13 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D6938-06e1 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6938-17a Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D6938-17 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D8167/D8167M-18a Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
ASTM D8167/D8167M-23 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
ASTM D8167/D8167M-23e1 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
ASTM D5101-99 Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio
ASTM G200-09 Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil
ASTM G200-20 Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil
ASTM D4564-08e1 Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method
ASTM D4564-08 Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method
ASTM G200-09(2014) Standard Test Method for Measurement of Oxidation-Reduction Potential 40;ORP41; of Soil
ASTM D7928-17 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D7263-09(2018)e2 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D2167-94(2001) Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
ASTM D7263-09(2018) Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D7263-09(2018)e1 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D7928-16e1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D1556-00 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
ASTM D7928-21e1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D7928-21 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D2167-08 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
ASTM G187-18 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM D1556-07 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
ASTM D6758-18e1 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
ASTM D421-85(2007) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
ASTM D7263-09 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM G187-12 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM G187-12a Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM D6938-23 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D6758-18 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
ASTM D7263-21 Standard Test Methods for Laboratory Determination of Density and Unit Weight of Soil Specimens
ASTM D2167-94 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
ASTM D2922-05 Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
ASTM D2922-04 Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
ASTM D6938-08 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D2922-01 Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
ASTM D2922-04e1 Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
ASTM C1000-19 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry
ASTM D6938-17ae1 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D2922-96e1 Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
ASTM D425-88(1994) Standard Test Method for Centrifuge Moisture Equivalent of Soils
ASTM D3441-05 Standard Test Method for Mechanical Cone Penetration Tests of Soil
ASTM D425-17 Standard Test Method for Centrifuge Moisture Equivalent of Soils
ASTM D425-88(2001) Standard Test Method for Centrifuge Moisture Equivalent of Soils
ASTM D1556/D1556M-15 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
ASTM D1556/D1556M-15e1 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
ASTM D6758-08 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
ASTM D2937-00e1 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
ASTM G187-23 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM D6758-02 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by an Electro-Mechanical Method
ASTM D4253-00(2006) Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
ASTM D422-63(2007)e2 Standard Test Method for Particle-Size Analysis of Soils
ASTM D5195-91(1996) Standard Test Method for Density of Soil and Rock In-Place at Depths Below the Surface by Nuclear Methods
ASTM D4253-00 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
ASTM D5195-02 Standard Test Method for Density of Soil and Rock In-Place at Depths Below the Surface by Nuclear Methods
ASTM D2937-04 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
ASTM D422-63(2007) Standard Test Method for Particle-Size Analysis of Soils
ASTM D2937-10 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
ASTM D5311-92(2004) Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
ASTM D4564-93 Standard Test Method for Density of Soil in Place by the Sleeve Method
ASTM D2049-69e1 Test Method for Relative Density of Cohesionless Soils
ASTM D5220-14 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
ASTM D5220/D5220M-21 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method

IN-BIS

IS 2720 Pt.29-1975 Soil Test Methods Part XXX In-Situ Determination of Soil Dry Density by Core Cutting Method
IS 2720 Pt.9-1971 Soil Test Methods Part Ⅸ Determination of Soil Dry Density-Moisture Content Relationship Soil Constant Weight Method
IS 2720 Pt.4-1986 Soil Testing Methods Part 4 Particle Size Analysis
IS 2720 Pt.4-1985 Soil Testing Methods Part 4 Particle Size Analysis
IS 2720 Pt.14-1983 Soil Test Methods Part 14 Determination of Density Index (Relative Density) of Cohesionless Soils
IS 2720 Pt.9-1992 Soil Test Methods Part 9 Determination of Dry Density-Moisture Content Relationship by Soil Constant Mass Method

Standard Association of Australia （SAA）

AS 1289.3.5.1:1995 Methods of testing soils for engineering purposes Method 3.5.1: Soil classification tests-Determination of the soil particle density of a soil-Standard method
AS 1289.6.6.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the one-dimensional consolidation properties of a soil - Standard method
AS 1289.4.3.1:2021 Methods of testing soils for engineering purposes, Method 4.3.1: Soil chemical tests — Determination of the pH value of a soil — Electrometric method
AS 1289.4.3.1:1997 Methods of testing soils for engineering purposes - Soil chemical tests - Determination of the pH value of a soil - Electrometric method
AS 1289.4.4.1:2017 Methods of testing soils for engineering purposes, Method 4.4.1: Soil chemical tests — Determination of the electrical resistivity of a soil — Method for fine granular materials
AS 1289.6.2.1:2001(R2013) Soil test methods for engineering use. Soil strength and consolidation tests. Determination of soil shear strength.
AS 1289.6.2.1:2001 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the shear strength of a soil
AS 1289.5.3.5:1997 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method
AS 1289.6.1.3:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard field-in-place method
AS 1289.6.6.1:2020 Methods of testing soils for engineering purposes, Method 6.6.1: Soil strength and consolidation tests — Determination of the one-dimensional consolidation properties of a soil — Standard method
AS 1289.6.9.1:2000 Methods of testing soils for engineering purposes - Soil strength and consolidation test Determination of stiffness of soil
AS 1289.4.4.1:1997 Methods of testing soils for engineering purposes - Soil chemical tests - Determination of the electrical resistivity of a soil - Method for sands and granular materials
AS 1289.6.3.3:1997 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Perth sand penetrometer test
AS 1289.6.7.2:2001/Amdt 1:2003 Soil test methods for engineering use Determination of soil strength and consolidation tests Soil permeability
AS 1289.5.3.5:1997(R2013) Soil testing methods for engineering use. Soil compaction and density tests. Determination of soil field dry density. Water displacement method.
AS 1289.6.1.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for a remoulded specimen
AS 1289.6.2.2:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of shear strength of a soil - Direct shear test using a shear box
AS 1289.6.7.1:2001(R2013) Soil test methods for engineering use Determination of soil strength and consolidation tests Soil permeability
AS 1289.3.9.1:2015 Methods of testing soils for engineering purposes, Method 3.9.1: Soil classification tests — Determination of the cone liquid limit of a soil
AS 1289.6.7.3:1999 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of permeability of a soil - Constant head method using a flexible wall permeameter
AS 1289.6.1.2:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for an undisturbed specimen
AS 1289.6.1.1:2014 Methods of testing soils for engineering purposes, Method 6.1.1: Soil strength and consolidation tests — Determination of the California Bearing Ratio of a soil — Standard laboratory method for a remoulded specimen
AS 1289.3.6.1:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving
AS 1289.3.6.1:2009 Soil testing methods for engineering use. Standard method for soil classification testing. Determination of soil particle size distribution. Sieve analysis.
AS 1289.6.2.2:2020 Methods of testing soils for engineering purposes, Method 6.2.2: Soil strength and consolidation tests — Determination of shear strength of a soil — Direct shear test using a shear box
AS 1289.6.7.2:2001(R2013) Soil testing methods for engineering purposes Determination of soil strength and consolidation tests Soil permeability Drop-head method for reshaped specimens
AS 1289.4.1.1:2019 Methods of testing soils for engineering purposes, Method 4.1.1: Soil chemical tests — Determination of the organic matter content of a soil — Normal method
AS 1289.2.2.1:1998 Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the total suction of a soil - Standard method
AS 1289.6.3.3:1997/Amdt No. 1:1999 Soil test methods for engineering use Soil strength and consolidation tests Determination of soil resistance to penetration Perth sand penetration test
AS 1289.6.7.1:2001 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of permeability of a soil
AS 1289.6.7.3:2016 Methods of testing soils for engineering purposes, Method 6.7.3: Soil strength and consolidation tests-Determination of permeability of a soil-Constant head method using a flexible wall permeameter
AS 1289.6.3.3:1997(R2013) Soil test methods for engineering use Soil strength and consolidation tests Determination of soil resistance to permeability Perth sand penetrometer test
AS 1289.4.1.1:1997 Methods of testing soils for engineering purposes - Soil chemical tests - Determination of the organic matter content of a soil - Normal method
AS 1289.5.6.1:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material
AS 1289.5.5.1:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method
AS 1289.3.8.1:2017 Methods of testing soils for engineering purposes, Method 3.8.1: Soil classification tests — Dispersion — Determination of Emerson class number of a soil
AS 3706.3:2012 Test methods for geotextiles Determination of tear strength Trapezoidal method
AS 1289.3.6.3:2020 Methods of testing soils for engineering purposes, Part 3.6.3: Soil classification tests — Determination of the particle size distribution of a soil — Standard method of fine analysis using an hydrometer
AS 1289.3.2.1:2009 Soil testing methods for engineering use. Soil classification tests. Standard method for determination of plastic limits of soils.
AS 1289.3.8.3:2014 Methods of testing soils for engineering purposes, Method 3.8.3: Soil classification tests — Dispersion — Determination of pinhole dispersion classification of a soil
AS 1289.5.3.1:2004 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus
AS 1289.5.8.1:1995 Methods of testing soils for engineering purposes Method 5.8.1: Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-density gauge - Direct transmission mode
AS 1289.3.7.1:2002(R2013) Soil test methods for engineering use. Soil classification test using electric vibrator to determine the sand equivalent of soil.
AS 1289.2.2.1:1998(R2013) Soil test methods for engineering use. Soil moisture content test. Standard method for determination of total soil suction.
AS 1289.3.4.1:2008 Soil Test Methods for Engineering Soil Classification Tests Standard Method for Determination of Linear Shrinkage of Soils
AS 1289.6.3.1:2004 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Standard penetration test (SPT)
AS 1289.3.2.1:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the plastic limit of a soil - Standard method
AS 1289.3.1.2:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the liquid limit of a soil - One point Casagrande method (subsidiary method)
AS 1289.6.3.2:1997 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - 9kg dynamic cone penetrometer test
AS 1289.6.1.3:1998(R2013) Soil Test Methods for Engineering Soil Strength and Consolidation Tests California Standard Field Method for Determination of Soil Bearing Ratio
AS 1289.5.8.4:2009 Soil Testing Methods for Engineering Soil Compaction and Density Testing Nuclear Surface Moisture Densitometer Calibration Using Standard Blocks
AS 1289.5.8.4:2009/Amdt 1:2012 Soil Testing Methods for Engineering Soil Compaction and Density Testing Nuclear Surface Moisture Densitometer Calibration Using Standard Blocks
AS 1289.3.6.2:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the particle size distribution of a soil - Analysis by sieving in combination with hydrometer analysis (subsidiary method)
AS 1289.6.7.2:2001 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of permeability of a soil - Falling head method for a remoulded specimen
AS 1289.3.1.1:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the liquid limit of a soil - Four point Casagrande method
AS 1289.6.5.1:1999 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the static cone penetration resistance of a soil - Field test using a mechanical and electrical cone or friction-cone penetrometer
AS 1289.5.8.5:1998(R2013) Soil Testing Methods for Engineering Soil Compaction and Density Testing Nuclear Surface Moisture Densitometer Density of Type A or Type C Standard Density Blocks
AS 1289.6.4.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water p
AS 1289.6.3.2:1997(R2013) Soil test methods for engineering use Soil strength and consolidation tests Determination of soil penetration resistance 9kg dynamic cone penetrometer test
AS 1289.1.2.1:1998 Methods of testing soils for engineering purposes - Sampling and preparation of soils - Disturbed samples - Standard method
AS 1289.3.5.2:2002(R2013) Soil test methods for engineering use Soil classification test
AS 1289.6.4.2:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a saturated specimen tested in undrained triaxial compression with measurement of pore
AS 1289.3.8.3:1997 Methods of testing soils for engineering purposes - Soil classification tests - Dispersion - Determination of pinhole dispersion classification of a soil
AS 1289.4.2.1:2020 Methods of testing soils for engineering purposes, Method 4.2.1: Soil chemical tests — Determination of the sulfate content of a natural soil and the sulfate content of the groundwater — Normal method
AS 1289.3.1.1:2009 Soil test methods for engineering use. Soil classification test. Determination of soil liquid limit. Four-point Casagrande method.
AS 1289.3.1.1:2009/Amdt 1:2015 Soil test methods for engineering use. Soil classification test. Determination of soil liquid limit. Four-point Casagrande method.
AS 1289.2.1.5:2005 Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Infrared lights method (subsidiary method)
AS 1289.4.2.1:1997 Methods of testing soils for engineering purposes - Soil chemical tests - Determination of the sulfate content of a natural soil and the sulfate content of the groundwater - Normal method
AS 1289.3.1.1:1995/Amdt 1:1998 Soil test methods for engineering use. Soil classification test. Determination of soil liquid limit. Four-point Casagrande method.
AS 1289.6.1.2:1998(R2013) Soil Test Methods for Engineering Soil Strength and Consolidation Test Soils Standard Laboratory Method for Determination of California Bearing Ratio on Undisturbed Samples
AS 1289.2.3.1:1998 Methods of testing soils for engineering purposes - Soil moisture content tests - Establishment of correlation - Subsidiary method and the standard method
AS 1289.3.1.2:2009 Soil test methods for engineering Soil classification test Determination of soil liquid limit One-point Casagrande method (auxiliary method)
AS 1289.7.1.2:1998 Methods of testing soils for engineering purposes - Soil reactivity tests - Determination of the shrinkage index of a soil - Loaded shrinkage index

Indonesia Standards

SNI 1742-2008 Testing methods for light solidity of soils
SNI 13-4179-1996 Determination of class number of soils by Emerson
SNI 1964-2008 Testing method for specific grafity of soils
SNI 6423-2008 Testing methods for choke potential of soil-geotextile system by gradient ratio
SNI 3422-2008 Testing methods for shrinkage limit of soils
SNI 03-6473-2000 Test methods for by falling head permeability (of soils)
SNI 03-6425-2000 Test methods for expansion index of soils
SNI 2813-2008 Test method for direct friction strength of drained consolidated soil
SNI 1967-2008 Testing methods for determination of liquid limit of soils

SCC

AS 1289.E4.1:1977 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the dry density ratio of a soil
AS 1289.C5.1:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the soil particle density of a soil
AS 1289.3.5.2:1995 Methods of testing soils for engineering purposes, Method 3.5.2: Soil classification tests - Determination of the soil particle density of combined soil fractions - Vacuum pycnometer method
AS 1289.E3.4:1977 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of the field dry density of a soil - Balloon densometer method
AS 1289.6.3.1:1993 Methods of testing soils for engineering purposes, Method 6.3.1: Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Standard penetration test (SPT)
AS 1289.E4.1:1982 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests Dry density ratio - Normal method
AS 1289.E3.5:1982 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method
AS 1289.F3.1:1977 Methods of testing soil for engineering purposes - Part F - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Standard method (SPT)
AS 1289.E3.3:1977 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of the field dry density of a soil - Core cutter method for fine-grained soils
AS 1289.E3.5:1977 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of field dry density of soil - Water replacement method
AS 1289.3.9:1991 Methods of testing soils for engineering purposes, Method 3.9: Soil classification tests - Determination of the cone liquid limit of a soil
AS 1289.C8.2:1980 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the percent dispersion of a soil
AS 1289.6.2.1:1997 Methods of testing soils for engineering purposes, Method 6.2.1: Soil strength and consolidated tests - Determination of the shear strength of a soil - Field test using a vane
AS 1289.2.2.1:1992 Methods of testing soils for engineering purposes, Method 2.2.1: Soil moisture content tests - Determination of the total suction of a soil - Standard method
AS 1289.5.1.1:1993 Methods of testing soils for engineering purposes, Method 5.1.1: Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort
AS 1289.3.7.1:1995 Methods of testing soils for engineering purposes, Method 3.7.1: Soil classification tests - Determination of the sand equivalent of a soil using a power-operated shaker
AS 1289.D3.1:1977 Methods of testing soil for engineering purposes - Part D - Soil chemical tests - Determination of the pH value of a soil - Standard method
AS 1289.C6.1:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving
AS 1289.6.7.1:1999 Methods of testing soils for engineering purposes, Method 6.7.1: Soil strength and consolidation tests - Determination of permeability of a soil - Constant head method for a remoulded specimen
AS 1289.5.4.1:1993 Methods of testing soils for engineering purposes, Method 5.4.1: Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio
AS 1289.5.3.1:1993 Methods of testing soils for engineering purposes, Method 5.3.1: Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus
AASHTO T 233-2002(2019) Standard Method of Test for Density of Soil In-Place by Block, Chunk, or Core Sampling
AS 1289.E3.2:1977 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of the field dry density of a soil - Sand replacement method using a sand pouring apparatus
AS 1289.6.7.2:1999 Methods of testing soils for engineering purposes, Method 6.7.2: Soil strength and consolidation tests - Determination of permeability of a soil - Falling head method for a remoulded specimen
AS 1289.5.2.1:1993 Methods of testing soils for engineering purposes, Method 5.2.1: Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using modified compactive effort
AASHTO T 88-2000(2004) Standard Method of Test for Particle Size Analysis of Soils
AS 1289.5.7.1:1993 Methods of testing soils for engineering purposes, Method 5.7.1: Soil compaction and density tests - Compaction control test - Hilf density ratio and Hilf moisture variation (rapid method)
AASHTO T 88-2019 Standard Method of Test for Particle Size Analysis of Soils
AS 1289.F1.3:1977 Methods of testing soil for engineering purposes - Part F - Soil strength and consolidation tests - Determination of the California bearing ratio of a soil - Standard field-in-place method
AASHTO T 88-2013(2017) Standard Method of Test for Particle Size Analysis of Soils
AS 1289.2.1.2:1992 Methods of testing soils for engineering purposes, Method 2.1.2: Soil moisture content tests - Determination of the moisture content of a soil - Sand bath method (subsidiary method)
AS 1289.3.6.3:1994 Methods of testing soils for engineering purposes, Method 3.6.3: Soil classification tests - Determination of the particle size distribution of a soil - Standard method of fine analysis using a hydrometer
AS 1289.E2.1:1977 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using modified compaction - Standard method
AS 1289.D3.2:1977 Methods of testing soil for engineering purposes - Part D - Soil chemical tests - Determination of the pH value of a soil - Colorimetric method (subsidiary method)
AS 1289.E7.1:1977 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Rapid method
AS 1289.F6.1:1977 Methods of testing soil for engineering purposes - Part F - Soil strength and consolidation tests - Determination of the one-dimensional consolidation properties of a soil
AS 1289.E6.1:1977 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the density index of a cohesionless material
AS 1289.C6.3:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the particle size distribution of a soil - Standard method of fine analysis using a hydrometer
AS 1289.C2.1:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the plastic limit of a soil (Standard method)
AS 1289.B1.2:1977 Methods of testing soil for engineering purposes - Part B - Soil moisture content tests - Determination of the moisture content of a soil - Sand bath method (subsidiary method)
AS 1289.D1.1:1977 Methods of testing soil for engineering purposes - Part D - Soil chemical tests - Determination of the organic matter content of a soil (Standard method)
AS 1289.C4.1:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the linear shrinkage of a soil (Standard method)
AS 1289.2.1.6:1993 Methods of testing soils for engineering purposes, Method 2.1.6: Soil moisture content tests - Determination of the moisture content of a soil - Hotplate drying method (subsidiary method)
AS 1289.E1.1:1977 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compaction - Standard method
AS 1289.C6.2:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the particle size distribution of a soil - Analysis by sieving in combination with hydrometer analysis (subsidiary method)
AS 1289.5.3.2:1993 Methods of testing soils for engineering purposes, Method 5.3.2: Soil compaction and density tests - Determination of the field dry density of a soil - Sand replacement method using a sand pouring can, with or without a volume displacer
AS 1289.2.1.1:1992 Methods of testing soils for engineering purposes, Method 2.1.1: Soil moisture content tests - Determination of the moisture content of a soil - Oven drying method (standard method)
AS 1289.F2.1:1977 Methods of testing soil for engineering purposes - Part F - Soil strength and consolidation tests - Determination of the shear strength of a soil - Field test using a vane
AS 1289.E2.2:1977 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using modified compaction - Subsidiary method
AS 1289.E3.1:1977 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of the field dry density of a soil - Sand replacement method using a sand-cone pouring apparatus
AS 1289.E1.2:1977 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compaction - Subsidiary method
AS 1289.C1.2:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the liquid limit of a soil - One point method (subsidiary method)
DANSK DS/EN 16502:2014 Test method for the determination of the degree of soil acidity according to Baumann-Gully
AS 1289.1:1991 Methods of testing soils for engineering purposes, Method 1: Preparation of disturbed soil samples for testing
AS 1289.C3.1:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Calculation of the plasticity index of a soil (Standard method)
AS 1289.3.8.1:1997 Methods of testing soils for engineering purposes, Method 3.8.1: Soil classification tests - Dispersion - Determination of Emerson class number of a soil
AS 1289.C7.1:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the sand equivalent of a soil using a power operated shaker
AS 1289.B1.5:1988 Methods of testing soil for engineering purposes - Part B - Soil moisture content tests - Determination of the moisture content of a soil - Infrared lights method (subsidiary method)
AENOR UNE-EN 16502:2015 Test method for the determination of the degree of soil acidity according to Baumann-Gully
AASHTO T 310-2013(2017) Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil–Aggregate by Nuclear Methods (Shallow Depth)
AS 1289.C1.1:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the liquid limit of a soil - Oven drying method (standard method)
AS 1289.7.1.1:1998 Methods of testing soils for engineering purposes, Method 7.1.1: Soil reactivity tests - Determination of the shrinkage index of a soil - Shrink-swell index
AS 1289.7.1.3:1992 Methods of testing soils for engineering purposes, Method 7.1.3: Soil reactivity tests - Determination of the shrinkage index of a soil - Core shrinkage index (subsidiary method)
AS 1289.3.8.2:1997 Methods of testing soils for engineering purposes, Method 3.8.2: Soil classification tests - Dispersion - Determination of the percent dispersion of a soil
AS 1289.7.1.2:1992 Methods of testing soils for engineering purposes, Method 7.1.2: Soil reactivity tests - Determination of the shrinkage index of a soil - Loaded shrinkage index
NS-EN 16502:2014 Test method for the determination of the degree of soil acidity according to Baumann-Gully
AS 1289.B1.1:1977 Methods of testing soil for engineering purposes - Part B - Soil moisture content tests - Determination of the moisture content of a soil - Oven drying method (standard method)
DIN EN 16502 E:2012 Draft Document - Test method for the determination of the degree of soil acidity according to Baumann-Gully; German version prEN 16502:2012
AS 1289.F1.2:1977 Methods of testing soil for engineering purposes - Part F - Soil strength and consolidation tests - Determination of the California bearing ratio of a soil - Standard laboratory method for an undisturbed specimen
AS 1289.F1.1:1977 Methods of testing soil for engineering purposes - Part F - Soil strength and consolidation tests - Determination of the California bearing ratio of a soil - Standard laboratory method for a remoulded specimen
AS 1289.7.1.1:1992 Methods of testing soils for engineering purposes, Method 7.1.1: Soil reactivity tests - Determination of the shrinkage index of a soil - Shrink swell index
AS 1289.E7.1:1983 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Compaction control test - Hilf density ratio - Rapid method
AS 1289.B1.4:1986 Methods of testing soil for engineering purposes - Part B - Soil moisture content tests - Determination of the moisture content of a soil - Microwave-oven drying method (subsidiary method)
AS 1289.5.4.2:1993 Methods of testing soils for engineering purposes, Method 5.4.2: Soil compaction and density tests - Compaction control test - Assignment of maximum dry density and optimum moisture content values
AS 1289.E8.2:1984 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of field moisture content and field dry density of a soil - Method using a nuclear surface moisture-density gauge - Backscatter mode
AS 3706.3:1990 Geotextiles - Methods of test, Method 3: Determination of tearing strength - Trapezoidal method
BS 1377:1975 Methods of test for soils for civil engineering purposes
AASHTO T 310-2006 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
AS 1289.C8.1:1980 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the Emerson class number of a soil
AASHTO T 310-2011 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
12/30270967 DC BS EN 16502. Test method for the determination of the degree of soil acidity according to Baumann-Gully
AASHTO T 310-2022 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil–Aggregate by Nuclear Methods (Shallow Depth)
AS 1289.E8.4:1986 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Calibration of nuclear surface moisture-density gauge using standard blocks
AS 1289.2.1.5:1992 Methods of testing soils for engineering purposes, Method 2.1.5: Soil moisture content tests - Determination of the moisture content of a soil - Infrared lights method (subsidiary method)
AS A89.22A:1973 Methods of testing soils for engineering purposes, Method 22A: Sand equivalent of aggregate and soil using a power-operated shaker
AS 1289.F3.3:1984 Methods of testing soil for engineering purposes - Part F - Soil strength and consolidation tests - Determination of the penetration resistance of a soil with a Perth sand penetrometer
AS 1289.E8.1:1984 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of field moisture content and field dry density of a soil - Method using a nuclear surface moisture-density gauge - Direct transmission mode
AS 1289.B1.3:1977 Methods of testing soil for engineering purposes - Part B - Soil moisture content tests - Determination of the moisture content of a soil - Methylated spirit ignition method (subsidiary method)
AS 1289.2.1.4:1992 Methods of testing soils for engineering purposes, Method 2.1.4: Soil moisture content tests - Determination of the moisture content of a soil - Microwave-oven drying method (subsidiary method)
AASHTO T 88-2022 Standard Method of Test for Particle Size Analysis of Soils
AS 1289.E8.3:1984 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Calibration of nuclear surface moisture-density gauge for field use
AS 1289.F3.2:1984 Methods of testing soil for engineering purposes - Part F - Soil strength and consolidation tests - Determination of the penetration resistance of a soil using the 9 kg dynamic cone penetrometer
AASHTO T 220-2022 Standard Method of Test for Determination of the Strength of Soil-Lime Mixtures
AASHTO T 273-1986(2022) Standard Method of Test for Soil Suction
AS A89.13E:1971 Methods of testing soils for engineering purposes, Method 13E: Field test for dry density using water replacement method
AS 1289.1.1:1999 Methods of testing soils for engineering purposes, Method 1.1: Sampling and preparation of soils - Preparation of disturbed samples for testing
DANSK DS/ISO 11271:2003 Soil quality – Determination of redox potential – Field method
AS 1289.F7.1:1984 Methods of testing soil for engineering purposes - Part F - Soil classification tests - Determination of permeability of a soil - Constant head method
AS A89:1966 Methods of testing soils for engineering purposes

Korean Agency for Technology and Standards (KATS)

KS F 2593-2009 Standard test method for bulk density of soil
KS F 2347-2018 Standard test method for insite density of soil by the rubber-balloon method
KS F 2308-2006 Test method for density of soil particles
KS F 2592-2019 Standard test method for electronic cone penetration of soils
KS F 2308-1986 Test method for density of soil particles
KS F 2593-2014 Standard test method for moisture density of soil
KS F 2302-2017 Test method for particle size distribution of soils
KS F 2304-1985 METHOD OF TEST FOR PLASTIC LIMIT OF SOILS
KS F 2311-2016 Test method for soil density by the sand replacement method
KS F 2304-1974(1995) METHOD OF TEST FOR PLASTIC LIMIT OF SOILS
KS F 2311-2016(2021) Test method for soil density by the sand replacement method
KS F 2311-1986 Test method for soil density by the sand replacement method
KS F 2308-2016(2021) Test method for density of soil particles
KS F 2302-2022 Test method for particle size distribution of soils
KS F 2308-2016 Test method for density of soil particles
KS F 2308-2022 Test method for density of soil particles
KS F 2311-2022 Test method for density of soil in place by sand-cone method
KS F 2347-2007 Testing method for density of soil in place by the rubber-ballon method
KS F 2347-1982 Testing method for density of soil in place by the rubber-ballon method
KS F 2311-2001 Test method for soil density by the sand replacement method
KS I ISO 11271-2016(2021) Soil quality－Determination of redox potential－Field method
KS F 2592-2014 Standard test method for electronic cone penetration of soils
KS K 0796-2020 Test method for trapezoid tearing strength of geotextiles
KS F 2307-2007 Test method for standard penetration
KS F 2320-2000 Testing method for the california bearing ratio of soils
KS F 2301-2005 Practice for preparing disturbed soil samples for soil testing
KS F 2320-2015 Testing method for the california bearing ratio of soils
KS F 2306-1995 Method of test for moisture content of soils
KS K 0796-2015(2020) Test method for trapezoid tearing strength of geotextiles
KS I ISO 11271-2021 Soil quality－Determination of redox potential－Field method
KS F 2312-2001 Test method for soil compaction using a rammer
KS F 2305-2015 Test method for liquid parameters of soils
KS F 2344-1979 METHOD FOR TESTING soil Unconfined compression
KS F 2302-2002 Test method for particle size distribution of soils

The American Road & Transportation Builders Association

AASHTO T 233-2002 Standard Method of Test for Density of Soil In-Place by Block, Chunk, or Core Sampling
AASHTO T 191-2014(R2018) Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method
AASHTO T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 233-2002(R2019) Standard Method of Test for Density of Soil In-Place by Block, Chunk, or Core Sampling
AASHTO T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 88-2020 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 310-2019 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil–Aggregate by Nuclear Methods (Shallow Depth)
AASHTO T 310-2013 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
AASHTO T 310-2010 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
AASHTO T 191-2014 Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method
AASHTO T 399-2022 Standard Method of Test for Determining In-Place Density and Moisture Content of Soil and Soil– Aggregate Using Complex Impedance Methodology
AASHTO T 100-2015 Standard Method of Test for Specific Gravity of Soils
AASHTO T 273-86(R2018) Standard Method of Test for Soil Suction

KR-KS

KS F 2347-2018(2023) Standard test method for insite density of soil by the rubber-balloon method
KS F 2308-2022(英文版) Test method for density of soil particles
KS I ISO 11271-2016 Soil quality－Determination of redox potential－Field method

Lithuanian Standards Office

LST 1360.6-1995 Soils for road construction. Testing methods. Determination of density of soil

RU-GOST R

GOST 26262-2014 Soils. Soils field methods for determining depth of thawing
GOST R 59594-2021 Soils. Field test methods with the use of resistivity cone penetration
GOST 23061-1990 Soils. Methods for radioisotope measurement of density and humidity
GOST 23061-2012 Soils. Methods for radioisotope measurement of density and humidity
GOST 26484-1985 Soils. Method for determination of exchangeable acidity
GOST R 53582-2009 Soils. Method of determination of thawing soil shear resistance
GOST 22733-2002 Soils. Laboratory method for determination of maximum density

AASHTO - American Association of State Highway and Transportation Officials

T88-1993 Standard Method of Test for Particle Size Analysis of Soils
T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
T 88-2000 Standard Method of Test Particle Size Analysis of Soils
T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
T238-1986 Standard Method of Test for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth) (R 1993) (ASTM D2922-71)
T 310-2013 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
T 310-2011 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
T 310-2010 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
T 191-2014 Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method
T 191-2002 Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method
T204-1990 Standard Method of Test for Density of Soil in-Place by the Drive Cylinder Method
T88-2000 Standard Method of Test for Particle Size Analysis of Soils (Twentieth Edition)
T 100-2014 Standard Method of Test for Specific Gravity of Soils
T 273-1986 Standard Method of Test for Soil Suction
T 100-2006 Standard Method of Test for Specific Gravity of Soils
TP 112-2014 Standard Method of Test for Determining In-Place Density and Moisture Content of Soil and Soil-Aggregate Using Complex Impedance Methodology
T273-1986 Standard Method of Test for Soil Suction

GOST

GOST R 71044-2023 Soils. Methods for determining the solubility of soils in water
GOST R 70260-2022 Soils. Methods for field determination of the density of coarse-grained soils
GOST R 59540-2021 Soils. Standard test methods for degree of salinity content
GOST 20069-1981 Soils. Field test method by static sounding

Japanese Industrial Standards Committee (JISC)

JIS A 1225:2009 Test method for bulk density of soils
JIS A 1225:2000 Test method for bulk density of soils
JIS A 1214:2013 Test method for soil density by the sand replacement method
JIS A 1214:2001 Test method for soil density by the sand replacement method
JIS A 1204:2009 Test method for particle size distribution of soils
JIS A 1202:2009 Test method for density of soil particles
JIS A 1202:1990 Test method for density of soil particles
JIS A 1202:1999 Test method for density of soil particles
JIS A 1204:2000 Test method for particle size distribution of soils
JIS A 1204:1990 Test method for particle size distribution of soils
JIS A 1214:1995 Test method for soil density by the sand replacement method
JIS A 1223:2009 Test method for fine fraction content of soils
JIS A 1223:2000 Test method for fine fraction content of soils

German Institute for Standardization

DIN ISO 11271:2022-11 Soil quality - Determination of redox potential - Field method (ISO 11271:2022); Text in German and English / Note: Date of issue 2022-10-14*Intended as replacement for DIN ISO 11271 (2003-03).
DIN EN 16502:2014-11 Test method for the determination of the degree of soil acidity according to Baumann-Gully; German version EN 16502:2014
DIN ISO 11271:2023 Soil quality - Determination of redox potential - Field method (ISO 11271:2022)
DIN ISO 11271:2003-03 Soil quality - Determination of redox potential - Field method (ISO 11271:2002) / Note: To be replaced by DIN ISO 11271 (2022-11).
DIN ISO 11271:2023-11 Soil quality - Determination of redox potential - Field method (ISO 11271:2022)

YU-JUS

JUS U.B1.012-1979 Testing of soils. Determination of soil moisture content
JUS U.B1.014-1988 Testing ofsoils. Deteriftjjnation ofdensiv/
JUS U.B1.038-1997 Testing ofsoil - Determination ofthe relation moisture content - densitv ofsoil

International Organization for Standardization (ISO)

ISO/CD 18386 Soil quality — Screening method for soil temperature — Measurement by IR thermometer
ISO 11271:2022 Soil quality — Determination of redox potential — Field method

British Standards Institution (BSI)

BS 1377-9:1990(2007) Methods of test for Soils for civil engineering purposes — Part 9 : In - situ tests
BS EN 16502:2014 Test method for the determination of the degree of soil acidity according to Baumann-Gully
24/30463824 DC BS ISO 18386 Soil quality - Screening method for soil temperature - Measurement by IR thermometer
BS EN ISO 18311:2018 Soil quality. Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms. Bait-lamina test

Association Francaise de Normalisation

NF EN 16502:2014 Test method for determining the degree of acidity of soils according to Baumann-Gully
NF P18-465:2014 Test method for the determination of the degree of soil acidity according to Baumann-Gully
NF P94-054:1991 Soils : investigation and testing. Determination of particle density. Pycnometer method.

AENOR

UNE-EN 16502:2015 Test method for the determination of the degree of soil acidity according to Baumann-Gully

GOSTR

GOST 20276.1-2020 Soils. Plate bearing test methods
GOST R 58594-2019 Soils. Method for determination of exchangeable acidity
GOST R 58888-2020 Soils. Field test method with the use of cone penetration with temperature measurement

VN-TCVN

TCVN 4195-2012 Soils.Laboratory methods for determination of density
TCVN 4404-1987 Cultivated soil.Methods for determination of hydrolytic acidity

NO-SN

NS 8005-1990 Geotechnical testing - Laboratory methods - Grain-size analysis of soil samples

ES-UNE

UNE-EN ISO 18311:2018 Soil quality - Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms - Bait-lamina test (ISO 18311:2016) (Endorsed by Asociación Española de Normalización in April of 2018.)

Danish Standards Foundation

DS/ISO 11271:2004 Soil quality - Determination of redox potential - Field method

API - American Petroleum Institute

API PUBL 351-1999 Overview of Soil Permeability Test Methods

Others: