Measurement procedures for coating thickness gauges

Measurement procedures for coating thickness gauges, Total:165 items.

The international standard classification for "Measurement procedures for coating thickness gauges" includes: Coated fabrics , Surface treatment , Linear and angular measurements .

The Chinese standard classification for "Measurement procedures for coating thickness gauges" includes: Basic standards and general methods , Material Protection , Length Measurement .

未注明发布机构

DIN 50933 E:2014-07 Measurement of coating thicknesses - Measurement of the thickness of coatings by difference measurement using a stylus instrument
DIN 50996 E:2019-06 Non-conductive coatings - Non-destructive measurement of coating thickness - Terahertz measurement method
ASTM RR-D01-1144 2013 D6132-Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM RR-D01-1013 1978 D1212-Measurement of Wet Film Thickness of Organic Coatings

Professional Standard - Chemical Industry

HG/T 3241-1989 Specifications for inner hole coating thickness tester
HG/T 3240~3241-2007 Computer Film Thickness GaugeComputer Hole Film Thickness Gauge

National Metrological Verification Regulations of the People's Republic of China

JJG 818-2018 Magnetic and Eddy Current Measuring Instrument for Coating Thickness

Group Standards of the People's Republic of China

T/CAMS 127-2023 Cable insulation thickness tester

Professional Standard - Aerospace

QJ 990.3A-2011 Inspection methods of coating.Part 3:Measurement of coating thickness

Professional Standard - Textile

FZ/T 01006-2008 Coated fabrics—Determination of the coating thickness

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11374-2012 Thermal spraying coating—Nondestructive methods for measurement of thickness
GB/T 11374-1989 Thermal spraying coating-Nondestructive methods for measurement of thickness

National Metrological Technical Specifications of the People's Republic of China

JJF 1224-2009 Calibration Specification for Reinforced Concrete Covermeter and Floorslab Thickness Tester

CZ-CSN

CSN ISO 4518:1994 Metallic coatings. Measurement of coating thickness. Profilometric method
CSN ISO 1463:1993 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
CSN ISO 3497:1994 Metallic coatings.Measurement of coating thickness.X-ray spectrometric methods
CSN ISO 2178:1994 Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method

German Institute for Standardization

DIN 50933:1987 Measurement of coating thickness by differential measurement using a stylus instrument
DIN 50933:2015 Measurement of coating thicknesses - Measurement of the thickness of coatings by difference measurement using a stylus instrument
DIN 50933:2015-08 Measurement of coating thicknesses - Measurement of the thickness of coatings by difference measurement using a stylus instrument
DIN CEN ISO/TS 19397:2018-05*DIN SPEC 55661:2018-05 Determination of the film thickness of coatings using an ultrasonic gage (ISO/TS 19397:2015); German version CEN ISO/TS 19397:2018
DIN 50986:1979 Measurement of coating thickness; Wedge cut method for measuring the thickness of paints and related coatings
DIN SPEC 55661:2013 Determination of the film thickness of coatings using an ultrasonic gage
DIN 50977:2005-12 Measurement of coating thickness - Non contact measurement of coating thickness on continuously moving objects
DIN EN ISO 4518:2021-07 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021); German version EN ISO 4518:2021
DIN 50996:2020-05 Non-conductive coatings - Non-destructive measurement of coating thickness - Terahertz measurement method
DIN EN 15042-2:2006-06 Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method; German version EN 15042-2:2006
DIN EN ISO 1463:2021-08 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021); German version EN ISO 1463:2021
DIN EN ISO 2177:2004-08 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (ISO 2177:2003); German version EN ISO 2177:2004
DIN EN ISO 9220:2022-05 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022); German version EN ISO 9220:2022
DIN EN ISO 19397:2024-01 Paints and varnishes - Determination of the film thickness of coatings using an ultrasonic gauge (ISO/DIS 19397:2023); German and English version prEN ISO 19397:2023 / Note: Date of issue 2023-12-01*Intended as replacement for DIN CEN ISO/TS 19397 (201...

Korean Agency for Technology and Standards (KATS)

KS D ISO 4518-2012(2017) Metallic coatings－Measurement of coating thickness－Profilometric method
KS D ISO 3497-2002(2017) Metallic coatings－Measurement of coating thickness－X-ray spectrometric methods
KS D 0253-1987 Methods for thickness measurement for thermal spraying coatings
KS D 0253-2012(2022) Methods for thickness measurement for thermal spraying coatings
KS D ISO 4518-2022 Metallic coatings－Measurement of coating thickness－Profilometric method
KS D 0253-2012 Methods for thickness measurement for thermal spraying coatings
KS D ISO 3868:2002 Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
KS D 0253-2022 Methods for thickness measurement for thermal spraying coatings
KS D ISO 3497-2022 Metallic coatings－Measurement of coating thickness－X-ray spectrometric methods
KS D 0253-2012(2017) Methods for thickness measurement for thermal spraying coatings
KS D 8544-2016(2021) Metallic coating－Measurement of coating thickness－Transmission electron microscopy method
KS D 8544-2006 Metallic coating-Measurement of coating thickness-Transmission electron microscopy method
KS D 8544-2021 Metallic coating－Measurement of coating thickness－Transmission electron microscopy method
KS D 8519-2009(2015) Metallic and oxide coating－Measurement of coating thickness－Microscopical method
KS D 8519-2015 Metallic and oxide coating－Measurement of coating thickness－Microscopical method
KS D ISO 9220-2022 Metallic coatings－Measurement of coating thickness－Scanning electron microscope method

The Society for Protective Coatings (SSPC)

SSPC PA 9-2015 Measurement of Dry Coating Thickness Using Ultrasonic Gages
SSPC PA 9-2008 Measurement of Dry Coating Thickness on Cementitious Substrates Using Ultrasonic Gages
SSPC PA 2-2004 Measurement of Dry Coating Thickness with Magnetic Gages
SSPC PA 2-1996 Measurement of Dry Coating Thickness with Magnetic Gages(Steel Structures Painting Manual, Ch 5 - Paint Application Specs.)

SSPC - The Society for Protective Coatings

PA 9-2015 Measurement of Dry Coating Thickness Using Ultrasonic Gages
PA 2-2004 Measurement of Dry Coating Thickness with Magnetic Gages
PA 2-1996 Measurement of Dry Coating Thickness with Magnetic Gages
PA GUIDE 9-2008 Measurement of Dry Coating Thickness on Cementitious Substrates Using Ultrasonic Gages
PA 9-2008 Measurement of Dry Coating Thickness on Cementitious Substrates Using Ultrasonic Gages

SCC

DIN 50933 E:2014 Draft Document - Measurement of coating thicknesses - Measurement of the thickness of coatings by difference measurement using a stylus instrument
BS PD CEN ISO/TS 19397:2018 Determination of the film thickness of coatings using an ultrasonic gage
BS EN ISO 4518:1995 Metallic coatings. Measurement of coating thickness. Profilometric method
DANSK DS/ISO 4518:2021 Metallic coatings – Measurement of coating thickness – Profilometric method
DANSK DS/CEN ISO/TS 19397:2018 Determination of the film thickness of coatings using an ultrasonic gage (ISO/TS 19397:2015)
SN-CEN ISO/TS 19397:2018 Determination of the film thickness of coatings using an ultrasonic gage (ISO/TS 19397:2015)
AENOR UNE-EN ISO 4518:1996 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:1980)
NS-EN ISO 4518:2021 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)
DANSK DS/EN ISO 4518:2021 Metallic coatings – Measurement of coating thickness – Profilometric method (ISO 4518:2021)
NS-EN ISO 4518:1995 Metallic coatings — Measurement of coating thickness — Profilometric method (ISO 4518:1980)
DIN 50996:2020 Non-conductive coatings - Non-destructive measurement of coating thickness - Terahertz measurement method
BS EN ISO 2177:1995 Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution
AENOR UNE-EN 15042-2:2007 Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method
DANSK DS/EN 15042-2:2006 Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method
NS-EN 15042-2:2006 Thickness measurement of coatings and characterization of surfaces with surface waves — Part 2: Guide to the thickness measurement of coatings by photothermic method
DANSK DS/ISO 9220:2022 Metallic coatings – Measurement of coating thickness – Scanning electron microscope method
DANSK DS/EN ISO 2177:2004 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
NS-EN 1071-1:2003 Advanced technical ceramics — Methods of test for ceramic coatings — Part 1: Determination of coating thickness by contact probe filometer
DIN 50996 E:2019 Draft Document - Non-conductive coatings - Non-destructive measurement of coating thickness - Terahertz measurement method
BS EN ISO 9220:1995 Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
BS EN ISO 1463:1995 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
DANSK DS/ISO 1463:2021 Metallic and oxide coatings – Measurement of coating thickness – Microscopical method
BS EN ISO 1463:2004 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method

HU-MSZT

MSZ 9648-1959 Paint coating thickness measurement
MSZ 9650/27-1982 Paint testing. Wet paint layer thickness measurement
MSZ 9640/38-1981 Paint coating and coating system inspection. Coating thickness detection
MSZ 6575/15-1982 Coating surface inspection. Multilayer thickness content, microscopic
MSZ 6575/18-1981 Coating surface inspection. Multi-layer thickness measurement power mode
MSZ 6575/3.lap-1961 Coating inspection. Multi-layer thickness detection

IN-BIS

IS 12434-1988 Coating/Plating Thickness Tester Specification Destructive Type
IS 12554 Pt.1-1988 Specification for non-destructive coating thickness testing instruments Part 1 Eddy current instruments
IS 6012-1970 Eddy current method for measuring coating thickness

Association Francaise de Normalisation

XP T30-129*XP CEN ISO/TS 19397:2018 Determination of the film thickness of coatings using an ultrasonic gage
NF EN ISO 4518:2021 Metallic coatings - Measurement of coating thickness - Profilometric method
NF A91-114*NF EN ISO 4518:2021 Metallic coatings - Measurement of coating thickness - Profilometric method
NF A91-117*NF EN ISO 3868:1995 Metallic and other non-organic coatings. Measurement of coating thicknesses. Fizeau multiple-beam interferometry method.
NF EN 15042-2:2006 Coating thickness measurement and surface characterization using surface waves - Part 2: guide for photometric coating thickness measurement
NF EN ISO 1463:2021 Metallic coatings and oxide layers - Measurement of coating thickness - Micrographic section method
NF EN ISO 3497:2001 Metallic coatings - Coating thickness measurement - X-ray spectrometry methods
NF T30-700:1983 Paints. Thick plastics coatings. Specifications.
NF EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method

CEN - European Committee for Standardization

CEN ISO/TS 19397:2018 Determination of the film thickness of coatings using an ultrasonic gage

GSO

BH GSO ISO/TS 19397:2022 Determination of the film thickness of coatings using an ultrasonic gage
GSO ISO/TS 19397:2021 Determination of the film thickness of coatings using an ultrasonic gage
GSO ISO 3497:2013 Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods
GSO ISO 2177:2013 Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution
BH GSO ISO 3497:2016 Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods
OS GSO ISO 3497:2013 Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods
GSO ISO 9220:2013 Metallic coatings -- Measurement of coating thickness -- Scanning electron microscope method
GSO ISO 1463:2013 Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method

British Standards Institution (BSI)

PD CEN ISO/TS 19397:2018 Determination of the film thickness of coatings using an ultrasonic gage
BS EN ISO 4518:2021 Metallic coatings. Measurement of coating thickness. Profilometric method
BS EN ISO 3868:1995 Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method
20/30395422 DC BS EN ISO 4518. Metallic coatings. Measurement of coating thickness. Profilometric method
BS EN ISO 2177:2004 Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution
BS EN ISO 4518:1980 Metallic coatings - Measurement of coating thickness - Profilometric method
BS EN ISO 9220:2022 Metallic coatings. Measurement of coating thickness. Scanning electron microscope method

International Organization for Standardization (ISO)

ISO/CD 19397:2023 Determination of the film thickness of coatings using an ultrasonic gage
ISO 4518:2021 Metallic coatings — Measurement of coating thickness — Profilometric method
ISO/TS 19397:2015 Determination of the film thickness of coatings using an ultrasonic gage
ISO 3497:1976 Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods
ISO 1463:2021 Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
ISO 2177:1972 Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution
ISO 9220:2022 Metallic coatings — Measurement of coating thickness — Scanning electron microscope method

American Society for Testing and Materials (ASTM)

ASTM D7378-10 Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
ASTM D6132-13(2022) Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM D6132-13 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM D6132-13(2017) Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM C1649-08 Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated
ASTM D7378-07 Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
ASTM B659-90(2014) Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings

ES-UNE

UNE-EN ISO 4518:2021 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)
UNE-EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)

Association of German Mechanical Engineers

DVS 2303-1-2011 Non-destructive testing of thermal spray coatings - coating thickness measurement
DVS 2303-1-2003 Non-destructive testing of thermal spray coatings - coating thickness measurement
DVS 2303-1-1991 Non-destructive testing of thermal spray coatings; layer thickness measurement

AT-ON

ONORM C 2525-1989 Measurement of coating thickness survey of methods
OENORM EN ISO 4518:2021 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)

IT-UNI

UNI EN ISO 4518:2021 Metallic coatings - Measurement of coating thickness - Profilometric method

SE-SIS

SIS SS-ISO 4518:1983 Meta I lic coatings - Measurement of coating thickness - Profilometric method
SIS SS-ISO 1463:1983 Meta I lic and oxide coatings - Measure- ment of coating thickness - Microscopi- cal method
SIS SS-ISO 9220:1989 Metallic coatings — Measurements of coating thickness — Scanning electron microscope method

RO-ASRO

STAS 11483-1981 Metallic coatingMEASUTRMENT OF COATING THICHNESS X RAY METHODS
STAS 11351-1989 Metallic coatings LAYER THICKNESS DETERMINATION BY GOULOMETRIC METHOD
STAS SR ISO 3497:1992 Metallic coatings. Measurement of coating thickness. X-ray spectro-metrie methods

AENOR

UNE-EN ISO 4518:1996 METALLIC COATINGS. MEASUREMENT OF COATING THICKNESS. PROFILOMETRIC METHOD. (ISO 4518:1980)
UNE-EN 15042-2:2007 Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method

ECIA - Electronic Components Industry Association

364-48-1990 TP-48 Test Procedure for Metallic Coating Thickness Measurements of Contacts

Danish Standards Foundation

DS/EN ISO 4518:2021 Metallic coatings – Measurement of coating thickness – Profilometric method (ISO 4518:2021)
DS/EN ISO 3497:2001 Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods
DS/EN 15042-2:2006 Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method
DS/EN ISO 2177:2004 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
DS/EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
DS/ISO 1463:2021 Metallic and oxide coatings – Measurement of coating thickness – Microscopical method

Lithuanian Standards Office

LST EN ISO 4518:2021 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)
LST EN ISO 4518:2001 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:1980)
LST EN 15042-2-2006 Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method

CH-SNV

SN EN ISO 4518:2021 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)

PL-PKN

PN-EN ISO 4518-2021-09 E Metallic coatings -- Measurement of coating thickness -- Profilometric method (ISO 4518:2021)

ZA-SANS

SANS 144:2008 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
SANS 144:1982 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method

FI-SFS

SFS-ISO 2177:1986 n case of interpretation disputes the English text applies

PT-IPQ

NP 1391-1988 Metallic coatings Electroplated coatings of nickel plus chromium Determination of local thickness of nickel coating Micrographic method
NP 1389-1988 metallic coatings Electroplated coatings of nickel plus chromium Determination of local thickness of nickel coating Jet method
NP 1388-1988 Metal coating. Electrolytic coating of chromium and nickel, measurement of chromium coating thickness, drop treatment
NP 211-1962 Rubber conveyor belt. Measurement of coating thickness

European Committee for Standardization (CEN)

prEN ISO 19397 Paints and varnishes - Determination of the film thickness of coatings using an ultrasonic gauge (ISO/DIS 19397:2023)

TH-TISI

TIS 1083-1992 Standard for measurement of coating thickness by microscopical method

RU-GOST R

GOST 8.502-1984 State system for ensuring the uniformity of measurments. Coating thickness gauges. Verification methods and means

Others: