limiting oxygen index

limiting oxygen index, Total:173 items.

The international standard classification for "limiting oxygen index" includes: Textiles in general , Application of statistical methods , Chemical analysis , Magnetic components , Explosives. Pyrotechnics , Protection against fire in general , Wood-based panels in general , Mathematics .

The Chinese standard classification for "limiting oxygen index" includes: Basic standards and general methods , Mathematics , Basic standards and general methods for water treatment agent , Magnetic component , Hygiene, safety and labor protection , Fire-fighting in general , Artificial board , Standardization and Quality Management .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9634.1-2002 Ferrite cores--Guide on the limits of surface irregularities--Part 1:General specificatoin
GB/T 22593-2008 Water treatment reagent - General rules for the determination of limiting viscosity number
GB/T 5454-1997 Textiles-Burning behaviour-Oxygen index method
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 1250-1989 Rules for expression and judgement of limiting values

Taiwan Provincial Standard of the People's Republic of China

CNS 2925-1968 Practices for Designating Significant Places in Specificd Limiting Values

未注明发布机构

DIN EN 1839 E:2010-01 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
DIN EN 60424-2 E:2013-05 Ferrite cores - Guidelines on the limits of surface irregularities - Part 2: RM-cores
DIN EN IEC 63093-9 E:2019-09 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores
DIN EN 1839 E:2014-06 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
DIN EN 60424-4 E:2013-05 Ferrite cores - Guidelines on the limits of surface irregularities - Part 4: Ring-cores
DIN EN IEC 63093-8:2019 Ferrite cores – Guidelines on dimensions and limits of surface damage – Part 8: E cores
DIN EN IEC 63093-1 E:2019-09 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification
DIN EN 60424-1 E:2013-05 Ferrite cores - Guidelines on the limits of surface irregularities - Part 1: General specification

Professional Standard - Coal

MT/T 837-1999 Method of determining the minimum oxygen content concentration for coal dust explosion

Group Standards of the People's Republic of China

T/CAPDA 034-2022 Test Method for the Limiting Oxygen Concentration of Pesticide Dust Clouds

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38301-2019 Determination of limiting oxygen concentration(LOC) of flammable gases and vapours
GB/T 39598-2021 A guide to the limited quantity in indoor loading for wood-based panel based on its ultimate formaldehyde emission

Hebei Provincial Standard of the People's Republic of China

DB13/T 1427-2011 Flame Retardant Bamboo Pulp Viscose Staple Fiber

Military Standard of the People's Republic of China-General Armament Department

GJB 3461-1998 Storage limit index of synthetic brake fluid for military vehicles

Professional Standard - Agriculture

GB 1250-1989 Rules for Expression and Judgment of Limiting Values

American Society for Testing and Materials (ASTM)

ASTM D4318-10e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D4318-00 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D4318-05 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D4318-17e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D4318-17 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM E2931-13(2019) Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
ASTM E2931-13 Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
ASTM E2079-07(2013) Standard Test Methods for Limiting Oxygen 40;Oxidant41; Concentration in Gases and Vapors
ASTM E241-09 Standard Guide for Limiting Water-Induced Damage to Buildings
ASTM E241-00e1 Standard Guide for Limiting Water-Induced Damage to Buildings
ASTM E241-04 Standard Guide for Limiting Water-Induced Damage to Buildings
ASTM E241-00 Standard Guide for Limiting Water-Induced Damage to Buildings

SCC

BS 6786:1986 Guide to the specification of limits for physical imperfections of parts made from magnetic oxides
DANSK DS/EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
NS-EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours
CEI EN 60424-4/AB:2016 Ferrite cores - Guidelines on the limits of surface irregularities Part 4: Ring-cores
DANSK DS/EN ISO 6284:1999 Construction drawings – Indication of limit deviations
DANSK DS/EN 60424-1:2016 Ferrite cores – Guidelines on the limits of surface irregularities – Part 1: General specification
CSA S408-1981(R2001) Guidelines for the Development of Limit States Design
CEI EN 60424-4:2016 Ferrite cores - Guidelines on the limits of surface irregularities Part 4: Ring-cores
AASHTO T 90-2000(2008) Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
AASHTO T 90-2022 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
AS 2706:1984 Numerical values - Rounding and interpretation of limiting values
AS B195:1962 Plain limit gauges limits and tolerances
AENOR UNE-EN 14756:2007 Determination of the limit oxygen concentration (CLO) for flammable gases and vapors.
AS B132.2:1955 Limits and fits for engineering - Guide to the selection of fits
NS-EN ISO 6284:1999 Construction drawings - Indication of limit deviations (ISO 6284:1996)
NS-EN 14756:2006 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
DIN EN 1839 E:2014 Draft Document - Determination of explosion limits of gases and vapours and determination of the limiting oxygen concentration (LOC) for flammable gases and vapours; German version prEN 1839:2014
09/30192613 DC BS 1916-3. Limits and fits for engineering. Part 3. Recommendations for tolerances, limits and fits for large diameters (guidance)
08/30177723 DC BS 969. Specification for limits and tolerances on plain limit gauges
DANSK DS/ISO 6284:2024 Technical product documentation – Construction documentation – Indication of limit deviations
AS B132.1:1955 Limits and fits for engineering, Part 1: Limits and tolerances

British Standards Institution (BSI)

BS EN 60424-4:2001 Guidance of the limits of surface irregularities of ferrite cores - Ring cores
BS EN 60424-4:2016 Ferrite cores. Guidelines on the limits of surface irregularities. Ring-cores
BS EN 60424-8:2015 Ferrite cores. Guidelines on the limits of surface irregularities. PQ-cores
BS EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
BS 1916-1:2009 Limits and fits for engineering Part 1: Guide to limits and tolerances
BS EN ISO 6284:1999(2000) Construction drawings — Indication of limit deviations
22/30435210 DC BS ISO 6284. Construction drawings. Indication of limit deviations
BS 969:1982 Specification for limits and tolerances on plain limit gauges
BS EN 60424-2:1998 Guidance of the limits of surface irregularities of ferrite cores - RM-cores
BS 969:2008 Specification for limits and tolerances on plain limit gauges
BS EN 60424-2:2016 Ferrite cores. Guidelines on the limits of surface irregularities. RM-cores
BS EN ISO 6284:2024 Technical product documentation. Construction documentation. Indication of limit deviations

German Institute for Standardization

DIN EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
DIN EN 1839:2017-04 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours; German version EN 1839:2017 / Note: DIN EN 1839 (2012-12) and DIN EN 14756 (2007-02) remain valid alongside this standard until 2018-01-11.
DIN EN 60424-1:2000 Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification (IEC 60424-1:1999); German version EN 60424-1:1999
DIN EN 1839:2017-11 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours; German version EN 1839:2017
DIN EN 60424-3:2000 Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores (IEC 60424-3:1999); German version EN 60424-3:1999
DIN EN 14756:2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours; English version of DIN EN 14756:2007-02
DIN ISO 6284:1997-09 Construction drawings - Indication of limit deviations (ISO 6284:1996)
DIN 18122-1:1997 Soil, investigation and testing - Consistency limits - Part 1: Determination of liquid limit and plastic limit
DIN 25482-2:1992 Limit of detection and limit of decision for nuclear radiation measurements; counting spectrometric measurements, neglecting the influence of sample treatment
DIN EN 63093-14:2017 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFD-cores (IEC 51/1185/CD:2017)

Association Francaise de Normalisation

NF S66-250*NF EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
NF T12-005:1981 Cellulose. Determination of the maximum viscosity index of the cellulose in dilute solutions.
NF T51-061:1971 PLASTICS. DETERMINATION OF THE VISCOSITY NUMBER AND THE LIMITING VISCOSITY NUMBER OF POLYETHYLENES AND POLYPROPYLENES IN DILUTE SOLUTION.
NF ISO 1628-6:1993 Plastics - Determination of viscosity index and limiting viscosity index - Part 6: methyl methacrylate polymers
NF EN ISO 6284:1999 Civil engineering drawings - Indication of limit deviations
NF EN 1839:2017 Determination of the explosive limits of gases and vapors and determination of the limiting oxygen concentration (CLO) of flammable gases and vapors
NF EN IEC 63093-13:2019 Ferrite cores - Guidelines for dimensions and limits of surface irregularities - Part 13: PQ cores
NF C93-340-2*NF EN 60424-2:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 2 : RM-cores

Korean Agency for Technology and Standards (KATS)

KS C IEC 60424-1:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 1：General specification
KS C IEC 60424-2:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
KS C IEC 60424-2:2017 Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
KS C IEC 60424-2-2017(2022) Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
KS C IEC 60424-4:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
KS C IEC 60424-4:2017 Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
KS C IEC 60424-4-2017(2022) Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
KS C IEC 60424-3:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 3：ETD-cores and E-cores
KS C IEC 60424-1-2017(2022) Ferrite cores－Guide on the limits of surface irregularities－Part 1：General specification
KS C IEC 60424-3-2017(2022) Ferrite cores－Guide on the limits of surface irregularities－Part 3：ETD-cores and E-cores
KS C IEC 63093-1:2022 Ferrite cores — Guidelines on dimensions and the limits of surface irregularities — Part 1: General specification
KS B ISO 12004-2003(2018) Guidelines for creating forming limit diagrams for metallic materials
KS D 0408-1999 General guide on limits of surface irregularities

International Electrotechnical Commission (IEC)

IEC 60424-2:1997 Guidance on the limits of surface irregularities of ferrite cores - Part 2: RM-cores
IEC 60424-2:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 2: RM-cores
IEC 60424-1:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 1: General specification
IEC 60424-1:1999 Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification
IEC 60424-4:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 4: Ring-cores
IEC 60424-4:2001 Ferrite cores - Guide on the limits of surface irregularities - Part 4: Ring-cores
IEC 60424-3:1999 Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores
IEC 63093-1:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification
IEC 63093-13:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores
IEC 63093-4:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores
IEC 63093-14:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFD-cores
IEC 63093-7:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7: EER-cores
IEC 63093-8:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 8: E-cores
IEC 63093-12:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 12: Ring-cores
IEC 63093-9:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores
IEC 60424-3:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 3: ETD-cores, EER-cores, EC-cores and E-cores
IEC 63093-6:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 6: ETD-cores for use in power supplies
IEC 63093-3:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for inductive proximity switches
IEC 60424:1973 Guide to the specification of limits for physical imperfections of parts made from magnetic oxides
IEC 63093-5:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: EP-cores and associated parts for use in inductors and transformers

European Committee for Standardization (CEN)

EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours

NO-SN

NS 1563-1972 ISO system for limits and fits - Inspection limits for indicating measuring instruments

KR-KS

KS C IEC 60424-2-2017 Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
KS C IEC 60424-4-2017 Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
KS C IEC 63093-4-2023 Ferrite cores — Guidelines on dimensions and the limits of surface irregularities — Part 4: RM-cores
KS C IEC 63093-1-2022 Ferrite cores — Guidelines on dimensions and the limits of surface irregularities — Part 1: General specification
KS B ISO 12004-2003(2023) Guidelines for creating forming limit diagrams for metallic materials

ZA-SANS

SANS 5852:2008 Plastic limit and plasticity index of fines in aggregates for base-courses
SANS 12004:1997 Metallic materials - Guidelines for the determination of forming-limit diagrams

Danish Standards Foundation

DS/EN ISO 6284:2000 Construction drawings - Indication of limit deviations
DS/EN 14756:2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours

GSO

GSO IEC 60424-4:2014 Ferrite cores - Guide on the limits of surface irregularities - Part 4: Ring-cores
BH GSO IEC 60424-4:2016 Ferrite cores - Guide on the limits of surface irregularities - Part 4: Ring-cores

The American Road & Transportation Builders Association

AASHTO T 90-2015 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
AASHTO T 90-2016 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
AASHTO T 90-2014 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
AASHTO T 90-2020 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
AASHTO T 90-16 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
AASHTO T90-2000 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils Twentieth Edition

AASHTO - American Association of State Highway and Transportation Officials

T 90-2015 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
T 90-2000 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
T90-1994 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
T 90-2014 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
T90-2000 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils (Twentieth Edition)

Canadian Standards Association (CSA)

CSA S408-1981SP-1981 Guidelines for the Development of Limit States Design R(2001)
CSA S408-2011 Guidelines for the development of limit states design standards (Second Edition)

Society of Automotive Engineers (SAE)

SAE AS176A-1960 TABLE OF LIMITS, LIMITS AND LUBRICATION CHARTS
SAE ARP5448/1-2010 Plain Bearing Radial Limit and Ultimate Load Tests

SAE - SAE International

SAE AS176B-1963 Limits@ Table of Limits@ and Lubrication Charts
SAE AS176D-2018 Limits@ Table of Limits and Lubrication Charts
SAE ARP5448/1A-2016 Plain Bearing Radial Limit and Ultimate Load Tests
SAE ARP5448/1-2004 Plain Bearing Radial Limit and Ultimate Load Tests

International Telecommunication Union (ITU)

ITU-T V.50 SPANISH-1988 STANDARD LIMITS FOR TRANSMISSION QUALITY OF DATA TRANSMISSION
ITU-T V.50 FRENCH-1988 Standard limits for transmission quality of data transmission

Standard Association of Australia （SAA）

AS 2706:2003 Numerical values - Rounding and interpretation of limiting values

Lithuanian Standards Office

LST EN ISO 6284:2001 Construction drawings - Indication of limit deviations (ISO 6284:1996)
LST EN 14756-2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours

AENOR

UNE-EN ISO 6284:2000 CONSTRUCTION DRAWINGS. INDICATION OF LIMIT DEVIATIONS (ISO 6284:1996)
UNE-EN 14756:2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours

RO-ASRO

STAS 10326-1981 BIPOLAR TRANSISTORS Limiting values and basic electrical parameters nomenclature

RU-GOST R

GOST 28900-1991 Guide to the specifications of limiting values for physical imperfections of parts of ferromagnetic oxides

International Organization for Standardization (ISO)

ISO 12004:1997 Metallic materials - Guidelines for the determination of forming-limit diagrams
ISO 11929-4:2022 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Gui
ISO 6284:2023 Technical product documentation — Construction documentation — Indication of limit deviations

American Bureau of Shipping

ABS 126 CORR-2014 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES
ABS 126 NOTICE 1-2011 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES

ABS - American Bureau of Shipping

ABS 126 NOTICE 2-2012 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES
ABS 126 COMMENTARY-2005 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES
ABS 126 CORR-2017 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES
ABS 126 NOTICE 3-2018 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES
ABS 126-2004 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES

WRC - Welding Research Council

BULLETIN 464-2001 GUIDELINES FOR SIZING OF VESSELS BY LIMIT ANALYSIS

American Welding Society (AWS)

WRC 464:2001 Guidelines For Sizing Of Vessels By Limit Analysis

CZ-CSN

CSN 65 0320-1966 Limit gap

Japanese Industrial Standards Committee (JISC)

JIS A 1205:1999 Test method for liquid limit and plastic limit of soils
JIS A 1205:2009 Test method for liquid limit and plastic limit of soils