The correct method for power supply ripple testing

The correct method for power supply ripple testing, Total:130 items.

The international standard classification for "The correct method for power supply ripple testing" includes: Integrated circuits. Microelectronics , Application of statistical methods , Testing of metals , Immunity , Protection against crime .

The Chinese standard classification for "The correct method for power supply ripple testing" includes: Hybrid integrated circuit , Technical management , Mathematics , Metal physical property test method , Microcircuit in general , Electromagnetic compatibility , Power capacitor , Guard and alarm system .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35001-2018 Microwave circuits—Measuring methods for noise source
GB/T 35002-2018 Microwave circuits—Measuring methods for frequency source

Professional Standard - Electron

SJ 20610-1996 Microwave circuits - Measuring methods for microwave switches
SJ 20611-1996 Microwave circuits-Measuring methods for solid noise sources
SJ/T 31165-1994 Requirements of readiness and methods of inspection and assessment for the power source used to test the electrical properties of power TWT
SJ/T 31162-1994 Requirements of readiness and methods of inspection and assessment for the power source used to test the electrical properties of continuous wave magnetrons
SJ/T 10640-1995 Measurement methods of electrical characteristics for piezoelectric filters
SJ 21076-2016 Measuring methods for microwave frequency synthesizer

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5441.10-1985 Test methods for communication cable--Measurement of actual length of coaxial pair--Sine wave method
GB/T 42972-2023 Microwave circuits—Test methods for detector
GB/T 6379.5-2006 Accuracy(trueness and precision) of measurement methods and results -Part 5: Alternative methods for the determination of the precision of a standard measurement method
GB/T 30859-2014 Test method for warp and waviness of silicon wafers for solar cells
GB/T 6379.4-2006 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
GB/T 17626.17-2005 Electromagetic Compatibility - Testing and measurement techniques - Ripple on d.c. input power port immunity test

Taiwan Provincial Standard of the People's Republic of China

CNS 3629-1989 Basic Environmental Testing Procedures Part 2: Tests, Test Fc and Guidance : Vibration (Sinusoidal)

Military Standard of the People's Republic of China-General Armament Department

GJB 9148-2017 Microwave circuit microwave switch test method
GJB 8219-2014 Atmospheric radio refraction correction method of exterior ballistic measurement
GJB 3311-1998 Microwave tube test method
GJB 3311A-2011 Microwave tube test method

Professional Standard - Machinery

JB/T 8957-1999 Method for verifying accuracy of tan delta measurements applicable to capacitors

未注明发布机构

DIN EN 534:2006 Corrugated bitumen sheets - Product specification and test methods
DIN EN 534:1998 Corrugated bitumen sheets - Product specification and test methods
DIN ISO 5725-2:2022-05 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

Professional Standard - Public Safety Standards

GA/T 1179-2014 Technical requirements and test methods for voiceprint verification algorithm in security system

Group Standards of the People's Republic of China

T/CSTM 00990-2023 Test method for dielectric constant and dielectric loss tangent in millimeter wave frequency range — Quasi-optical cavity method
T/GVS 006-2022 Method of measuring output deviation stability for semiconductor RF power supply and microwave power supply

International Organization for Standardization (ISO)

ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method
ISO 5725-5:1998/cor 1:2005 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method; Technical Corrigendum 1
ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
ISO 5725-3:1994/cor 1:2001 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method; Technical Corrigendum 1
ISO 5725-2:1994/cor 1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method; Technical Corrigendum 1

German Institute for Standardization

DIN ISO 5725-4:2003 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method (ISO 5725-4:1994)
DIN ISO 5725-5 Berichtigung 1:2006 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998), Corrigenda to DIN ISO 5725-5:2002-11 (ISO 5725-5:1998/Cor. 1:2005
DIN EN 534:2020-05 Corrugated bitumen sheets - Product specification and test methods; German and English version prEN 534:2020 / Note: Date of issue 2020-03-27*Intended as replacement for DIN EN 534 (2010-07).
DIN EN 534:2010-07 Corrugated bitumen sheets - Product specification and test methods; German version EN 534:2006+A1:2010 / Note: To be replaced by DIN EN 534 (2020-05).
DIN EN 61307:2012-03 Industrial microwave heating installations - Test methods for the determination of power output (IEC 61307:2011); German version EN 61307:2011 / Note: DIN EN 61307 (2006-11) remains valid alongside this standard until 2014-06-22.
DIN ISO 5725-5:2002 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998)
DIN ISO 5725-3:2003 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (ISO 5725-3:1994 including Technical Corrigendum 1:2001)
DIN EN 2591-428:2003 Aerospace series - Elements of electrical and optical connection; Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs; German and English version EN 2591-428:2002
DIN 41755-1:1970-01 Denomination of the ripple of d.c voltage, periodic deviations; terms and measuring methods

British Standards Institution (BSI)

BS ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method
BS EN 61307:2011 Industrial microwave heating installations. Test methods for the determination of power output
BS EN 61000-4-17:1999+A2:2009 Electromagnetic compatibility (EMC). Testing and measurement techniques. Ripple on d.c. input power port immunity test
BS EN 50708-3-4:2022 Power transformers. Additional European requirements - Large power transformer. Special tests for corrugated tank and radiators
20/30400983 DC BS EN 534. Corrugated bitumen sheets.Product specification and test methods
BS EN 60939-2:2005+A1:2023 Passive filter units for electromagnetic interference suppression. Sectional specification. Passive filter units for which safety tests are appropriate. Test methods and general requirements

SCC

BS ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results-Basic methods for the determination of the trueness of a standard measurement method
DANSK DS/ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results – Part 4: Basic methods for the determination of the trueness of a standard measurement method
NS-EN 534:2006 Corrugated bitumen sheets — Product specification and test methods
UNE-EN 534:2007 Corrugated bitumen sheets - Product specification and test methods
BS PD 6528:1990 Method for verifying accuracy of tan delta measurements applicable to capacitors
BS 7509:1995 Industrial microwave heating installations. Test methods for determination of power output
UNE-EN 61307:1997 INDUSTRIAL MICROWAVE HEATING INSTALLATIONS. TEST METHODS FOR THE DETERMINATION OF POWER OUTPUT.
AWWA ACE60071 Selecting the Right Approach to Validation Testing: Three Options and Lessons Learned
AASHTO T 249-2003(2020) Standard Method of Test for Helical Lock Seam Corrugated Pipe
DIN EN 534/A1 E:2009 Draft Document - Corrugated bitumen sheets - Product specification and test methods; German version EN 534:2006/prA1:2009
AS 2888.1:1993 Methods of testing plastics waste fittings, Method 1: Method of determining the suitability of connection threads of BSP form
ASD-STAN prEN 3866:1970 Non-metallic materials - Glass tranparencies - Test methods - Determination of ream and surface ripple
CSA C381.2-2014 Test method for determining the energy efficiency of battery-charging systems
BS 4784:1973 Method for the determination of correct invoice mass (weight) of textiles
CAN/CSA-C381.2-2008 Test method for determining the energy efficiency of battery-charging systems
AS 1080.2.2:1981 Methods of testing timber - Determination of slope of grain by reference to surface checks
UNE-EN 61307:2006 Industrial microwave heating installations - Test methods for the determination of power output (IEC 61307:2006)

Korean Agency for Technology and Standards (KATS)

KS A ISO 5725-4:2012 Accuracy(trueness and precision) of measurement methods and results-Part 4:Basic methods for the determination of the trueness of a standard measurement method
KS A ISO 5725-4-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 4：Basic methods for the determination of the trueness of a standard measurement method
KS A ISO 5725-5-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 5：Alternative methods for the determination of the precision of a standard measurement method
KS F 2735-2004 Testing method of detecting reinforcement by electromagnetic wave method
KS A ISO 5725-2-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 2：Basic method for the determination of repeatability and reproducibility of a standard measurement method

IT-UNI

UNI ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method

Association Francaise de Normalisation

NF X06-041-4*NF ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Part 4 : basic methods for the determination of the trueness of a standard measurement method
NF EN 534/IN1:2010 Plaques ondulées bitumées - Spécifications des produits et méthodes d'essai
NF EN 534+A1:2010 Plaques ondulées bitumées - Spécifications des produits et méthodes d'essai
NF ISO 5725-4:2020 Accuracy (trueness and precision) of measurement results and methods - Part 4: basic methods for determining the accuracy of a standardized measurement method
NF EN 61307:2011 Industrial microwave heating installations - Test methods for determining output power
NF EN 61580-7:2002 Measurement methods applied to waveguides - Part 7: graphical method for determining the performance of a waveguide
NF X06-041-5*NF ISO 5725-5:1998 Application statistics - Accuracy (trueness and precision) of measurement methods and results - Part 5 : alternative methods for the determination of the precision of a standard measurement methods.
NF C26-136-2/A1*NF EN 61628-2/A1:2008 Corrugated pressboard and presspaper for electrical purposes - Part 2 : methods of test
NF E48-390-1*NF ISO 10767-1:2015 Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 1 : method for determining source flow ripple and source impedance of pumps
NF A09-321:1988 Non destructive testing. Ultrasonic testing. Methods for specifying ultrasonic apparatus.
NF EN IEC 60793-1-34:2021 Optical fibers - Part 1-34: measurement methods and test procedures - Fiber corrugation

VN-TCVN

TCVN 6910-4-2001 Accuracy (trueness and precision) of measurement methods and results.Part 4: Basic methods for the determination of the trueness of a standard measurement method
TCVN 4435-2000 Asbestos-cement corrugated sheets.Method of test
TCVN 6910-5-2002 Accuracy (trueness and precision) of measurement methods and results.Part 5: Alternative methods for the determination of the precision of a standard measurement method

GSO

GSO 2344:2014 Single-ply wet-creped paper towelling- Test methods
GSO ISO 5725-3:2010 Accuracy (trueness and precision) of measurement methods and results -- Part 3: Intermediate measures of the precision of a standard measurement method
GSO IEC 61307:2013 Industrial microwave heating installations - Test methods for the determination of power output
GSO IEC 61000-4-17:2008 Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

RU-GOST R

GOST R ISO 5725-4-2002 Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method

American Society for Testing and Materials (ASTM)

ASTM D4893-20 Standard Test Method for Determination of Pitch Volatility
ASTM E1486-98(2004) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM F2136-18 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
ASTM F2136-08 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
ASTM F2136-01e1 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
ASTM D3344-90(2005) Standard Test Method for Total Wax Content of Corrugated Paperboard
ASTM D3344-90(2015) Standard Test Method for Total &x2009Wax &x2009Content &x2009of &x2009Corrugated &x2009Paperboard
ASTM E388-04(2015) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers
ASTM D1502-60(1980)e1 Method of Test for Transverse Load of Corrugated Reinforced Plastic Panels

The American Road & Transportation Builders Association

AASHTO T 249-2003 Standard Method of Test for Helical Lock Seam Corrugated Pipe
AASHTO T 249-2003(R2007) Standard Method of Test for Helical Lock Seam Corrugated Pipe
AASHTO T 249-2003(R2020) Standard Method of Test for Helical Lock Seam Corrugated Pipe

AENOR

UNE-EN 60156:1997 INSULATING LIQUIDS. DETERMINATION OF THE BREAKDOWN VOLTAGE AT POWER FRequency. Test method.
UNE-EN 534:2007+A1:2010 Corrugated bitumen sheets - Product specification and test methods
UNE-EN 61000-4-17:2001/A1:2005 Electromagnetic compatibility (EMC) -- Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
UNE-EN 61000-4-17:2001/A2:2009 Electromagnetic compatibility (EMC) -- Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
UNE-EN 61000-4-17:2001 Electromagnetic compatibility (EMC) -- Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test.

Society of Automotive Engineers (SAE)

SAE ARP4244-2004 Recommended Insertion Loss Test Methods for EMI Power Line Filters
SAE ARP4244-1998 Recommended Insertion Loss Test Methods for EMI Power Line Filters

ES-UNE

UNE-EN 61580-7:1996 METHODS OF MEASUREMENT FOR WAVEGUIDES. PART 7: GRAPHICAL METHOD FOR THE DETERMINATION WAVEGUIDE PERFORMANCE. (Endorsed by AENOR in December of 1996.)
UNE-EN 61307:2011 Industrial microwave heating installations - Test methods for the determination of power output (Endorsed by AENOR in October of 2011.)

Lithuanian Standards Office

LST EN 534-2006+A1-2010 Corrugated bitumen sheets - Product specification and test methods

Danish Standards Foundation

DS/EN 534+A1:2011 Corrugated bitumen sheets - Product specification and test methods
DS/EN 61000-4-17:2000 Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
DS/EN 61000-4-17/A1:2004 Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
DS/EN 61000-4-17/A2:2009 Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

American National Standards Institute （ANSI)

ANSI/SCTE 114-2010 Test Method for Dimensions of Corrugated Subscriber Access Cable
ANSI/SCTE 145-2013 Test Method for Second Harmonic Distortion of Passives Using a Single Carrier

Japanese Industrial Standards Committee (JISC)

JIS B 8349-1:2017 Hydraulic fluid power -- Determination of pressure ripple levels generated in systems and components -- Part 1: Method for determining source flow ripple and source impedance of pumps
JIS R 7202:1997 Testing methods for screw precision of cylindrical machined graphite electrodes

European Committee for Standardization (CEN)

EN 2591-428:2002 Aerospace series - Elements of electrical and optical connection; Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs

AASHTO - American Association of State Highway and Transportation Officials

T 249-1993 Standard Method of Test for Helical Lock Seam Corrugated Pipe
T 249-2003 Standard Method of Test for Helical Lock Seam Corrugated Pipe

PL-PKN

PN E04160 ArkusZ81-1973 Electric cables Methods of ?esting Wave parame?ers test

IEC - International Electrotechnical Commission

IEC 61307:2006 Industrial Microwave Heating Installations - Test Methods for the Determination of Power Output (Edition 2.0)

BSI

DANSK DS/ISO 26101-2:2024 Acoustics – Test methods for the qualification of the acoustic environment – Part 2: Determination of the environmental correction

DIN

DIN EN 61307:2006 Industrial microwave heating installations - Test methods for the determination of power output (IEC 61307:2006); German version EN 61307:2006

NZ-SNZ

AS/NZS 4659.3:1999 Guide to Determining the Equivalence of Food Microbiology Test Methods Part 3: Confirmation Tests (Incorporating Amendment 1: 02/2002)

Standard Association of Australia （SAA）

IEC 60939-2:2005/AMD1:2023 Amendment 1 — Passive filter units for electromagnetic interference suppression — Part 2: Sectional specification — Passive filter units for which safety tests are appropriate — Test methods and general requirements

Others: