sj/t 10676-1995

sj/t 10676-1995, Total:137 items.

The international standard classification for "sj/t 10676-1995" includes: .

The Chinese standard classification for "sj/t 10676-1995" includes: Technical Management , Technical management , Technical management , Technical management , Technical management , Technical management , Technical management , Technical management , Technical management , Technical management , Technical management .

Professional Standard - Electron

SJ/T 10680-1995 Fixed capacitors for use in electronic equipment.part l2:Blank detail specification Fixed polycarbonate film dielectric metal foil d．c.capacitors Assessment level E
SJ/T 10631-1995 Number of technological documents
SJ/T 31483-1995 Energy Consumption Quotas for Comparable Unit Output of Electronic-Specific Tungsten and Molybdenum Material Manufacturing Products
SJ/T 10661-1995 Electroacoustic parameters and testing methods of loudspeaker system for cinefilm projection
SJ/T 31491-1995 Comparable unit output energy consumption quota for electronic cable manufacturing products
SJ/T 31470-1995 Energy Consumption Quotas for Comparable Unit Output of Color Picture Tube Manufacturing Products
SJ/T 9566-1995 Quality grading standard for audio combination equipment
SJ/T 10612.1-1995 Aerials for the reception of sound and television broadcasting in the frequency range 30MHz to 1GHz - Part 1: Electrical and mechanical characteristics
SJ/T 10652-1995 General specification for short wave single-sideband communication equipment
SJ/T 10637-1995 Series of construction types and dimensions for vacuum capacitors
SJ/T 10622-1995 Vented nickel-cadmium prismatic rechargeable single cells
SJ/T 10643-1995 Bar connectors, Type TJC1, detail specification for
SJ/T 10642-1995 Bar connectors,Type TJC,generic specification for
SJ/T 10677-1995 Nickel oxide powder for electronic industry
SJ/T 10620-1995 Type designation system for piezoelectric filters
SJ/T 31476-1995 Energy Consumption Quotas for Comparable Unit Output of Radar Machine Manufacturing Products
SJ/T 10466.19-1995 Guidelines for quality improvement
SJ/T 10623-1995 Series of filament voltage and heater voltage for electron tubes
SJ/T 10660-1995 General specification for sounders and buzzers
SJ/T 9569.9-1995 Quality grading standard for permanent magnetic materials of sintered neodymium iron boron
SJ/T 9569.5-1995 Quality grading standard for LGA and LGB fixed inductors
SJ/T 9571.2-1995 Quality grading standard for piezoelectric ceramic filters for SIF circuit of TV receivers
SJ/T 10633-1995 Atomic-absorption spectrophotometry of impurties in alumina for electron ceramic raw materials
SJ/T 31486-1995 Comparable unit output energy consumption quota for alkaline storage battery manufacturing products
SJ/T 10665-1995 Performance requirements and methods of measurement for base station of public mobile communication system
SJ/T 10612.2-1995 Aerials for the reception of sound and television broadcasting in the frequency range 30MHz to 1GHz - Part 2: Methods of measurement of electrical performance parameters
SJ/T 9573.2-1995 Quality grading standard for chromaticity delay lines of color television receivers
SJ/T 10650-1995 Technical requirements for toll manual telephone switching equipment
SJ/T 9569.8-1995 Quality grading standard for permanent magnetic materials of rare earth cobalt
SJ/T 10663-1995 Cabled distribution systems for television and sound signals-Methods of measurement on fibre optic equipments and components
SJ/T 10640-1995 Measurement methods of electrical characteristics for piezoelectric filters
SJ/T 31479-1995 Comparable unit output energy consumption quota for color TV transmitters and TV differential converter manufacturing products
SJ/T 10688-1995 Motors, asynchronous, single-phase, gearhead and electronic regulator, Series YYJT
SJ/T 31490-1995 Comparable unit output energy consumption quota for piezoelectric quartz crystal manufacturing products
SJ/T 10658-1995 Environmental testing requirements and methods for universal NBTV systems
SJ/T 9569.1-1995 Quality grading standard for UYF cores made of magnetic oxides
SJ/T 10682-1995 Fixed capacitors for use in electronic equipment - Part 11: Blank detail specification: Fixed polyethylene- terephthalate film dielectric metal foil d.c. capacitors-Assessment level E
SJ/T 10629.5-1995 Management system for CAD design documents-Management of design documents
SJ/T 10626-1995 Method for determining impurities in gold wire for semiconductor lead bonding by ICP-AES
SJ/T 10651-1995 Methods of test for toll manual telephone switching equipment
SJ/T 10636-1995 Piezoelectric ceramic filters for use in electronic equipment.Sectional specification for.Piezoelectric ceramic filters for use in FM radios
SJ/T 10675-1995 Silicon dioxide micropowder for electronic and electrical equipment industry
SJ/T 31472-1995 Comparable unit output energy consumption quota for TV tuner manufacturing products
SJ/T 10625-1995 Determination method for interstital atomic oxygen content of germanium by infrared abaorption
SJ/T 10628-1995 Dimensional tolerance for plastic parts
SJ/T 10647-1995 Bar connectors, Type TJC5, detail specification for
SJ/T 10670-1995 General requirements for workmanship of surface mount technology
SJ/T 10627-1995 Test methods for oxygen precipitation characterization of silicon wafers by measurement of interstitial oxygen reduction
SJ/T 9565-1995 Quality grading standard for sound broadcasting receivers
SJ/T 10673-1995 General specification for compact fluorescent lamps
SJ/T 10614-1995 Sectional specification for inductors of assessed quality for use in electronic equipment for capability approval
SJ/T 9564-1995 Quality grading standard for electret microphones
SJ/T 10646-1995 Bar connectors,Type TJC4,detail specification for
SJ/T 10681-1995 Fixed capacitors for use in electronic equipment. part 11: Sectional specification: Fixed polyethylene-terephthalate film dielectric metal foil d. c capacitors
SJ/T 10641-1995 Type designation system for surface acoustic wave filters
SJ/T 10635-1995 Fixed capacitors for use in electronic equipment.Blank detail specification:Fixed metallized paper dielectric capacitors for direct current.Assessment level E
SJ/T 9570.3-1995 Quality grading standard for quartz crystal oscillators
SJ/T 10656-1995 External interface for short wave single-sideband communication equipment
SJ/T 31485-1995 Comparable unit output energy consumption quota for synthetic carbon film, metallic glass glaze, and organic solid core potentiometer manufacturing products
SJ/T 9572.1-1995 Quality grading standard for surface acoustic wave filters for IF circuit of color television receivers
SJ/T 9572.2-1995 Quality grading standard for surface acoustic wave filters for IF circuit of black and white television receivers
SJ/T 31492-1995 Comparable unit output energy consumption quota for capacitor manufacturing products
SJ/T 10655-1995 Inspecting rule for short wave single-sideband communication equipment
SJ/T 10654-1995 General requirements of reliability test for short wave single-sideband communication equipment
SJ/T 10466.18-1995 Guidelines for management of product quality information
SJ/T 9563-1995 Quality grading standard for stereo phones
SJ/T 10619-1995 Detail specification for electronic components - Fixed power resistors - Type RYG2 metal oxide film resistors Assessment level E
SJ/T 10466.21-1995 Guidelines for personnel training and qualification evaluation
SJ/T 31484-1995 Comparable unit output energy consumption quota for electronic ceramic parts manufacturing products
SJ/T 10634-1995 Piezoelectric ceramic filters for use in electronic equipment.Blank detail specification for.Piezoelectric ceramic filters for use in FM radios.Assessment level F
SJ/T 10612.4-1995 Aerials for the reception of sound and television broadcasting in the frequency range 30MHz to 1GHz - Part 4: Guide for the preparation of aerial performance specification detailed s
SJ/T 9569.3-1995 Quality grading standard for deflection yoke cores for color television receivers
SJ/T 9571.1-1995 Quality grading standard for low-frequency piezoelectric ceramic resonators
SJ/T 10686-1995 Optocouplers for safe electrical isolation-Requirements, tests
SJ/T 9571.5-1995 Quality grading standard for piezoelectric ceramic buzzers
SJ/T 10662-1995 General specification of deflection coils for monochrome television receivers
SJ/T 9573.1-1995 Quality grading standard for luminance delay lines of color television receivers
SJ/T 10617-1995 Detail specification for electronic components-Fixed low-power non-wirewound fixed resistors - Type RT13 carbon film fixed resistors Assessment level E
SJ/T 10618-1995 Detail specification for electronic components-Fixed power resistors - Type RYG1 metal oxide film resistors Assessment level E
SJ/T 31488-1995 Comparable unit output energy consumption quota for integrated circuit manufacturing products
SJ/T 10644-1995 Bar connectors,Type TJC2,detail specification for
SJ/T 10649-1995 General specification of atenna for satellite broadcast telecision earth receive station in the ku-band
SJ/T 10616-1995 Sectional specification for pulse transformers of assessed quality for use in electronic equipment for capability approval
SJ/T 10629.4-1995 Management system for CAD design documents-Signature of design documents
SJ/T 10671-1995 General specification for precision screen printer
SJ/T 31471-1995 Comparable unit output energy consumption quota for electric vacuum device manufacturing products
SJ/T 31473-1995 Comparable unit output energy consumption quota for relay manufacturing products
SJ/T 10639-1995 Quartz crystal unit terms
SJ/T 10466.20-1995 Guidelines for quality plan
SJ/T 31478-1995 Comparable unit output energy consumption quota for automobile radio and player manufacturing products
SJ/T 10645-1995 Bar connectors, Type TJC3, detail specification for
SJ/T 10653-1995 Environmental requirements and test methods for short wave single-sideband communication equipment
SJ/T 9569.6-1995 Quality grading standard for permanent ferrite materials
SJ/T 10689-1995 BYJ series permanent magnet stepping motors with reductors
SJ/T 10669-1995 Solderability tests for surface mounted devices
SJ/T 10683-1995 General specification of passive voltage probes used for oscilloscopes
SJ/T 10684-1995 Sectional specification for permanent ferrite magnets for speaker
SJ/T 10666-1995 Quality assessment of soldered joints of SMA
SJ/T 10630-1995 Antistatic requirments for manufacturing electronic element and device
SJ/T 10672-1995 Type code for technological equipment for electronic industry
SJ/T 31475-1995 Energy consumption quota for comparable unit output of color TV manufacturing products
SJ/T 10678-1995 Bismuth trioxide powder for electronic industry
SJ/T 9569.7-1995 Quality grading standard for permanent ferrite magnets for loudspeakers
SJ/T 31482-1995 Comparable unit output energy consumption quota for magnetic material components and device manufacturing products
SJ/T 9571.3-1995 Quality grading standard for piezoelectric ceramic discriminators for SIF discriminator circuit of TV receivers
SJ/T 31487-1995 Comparable unit output energy consumption quota for single- and double-sided printed circuit board manufacturing products
SJ/T 10685-1995 Intermediate-frequency transformers and oscillator coils for transistorized amplitude modulation broadcast receivers
SJ/T 9567-1995 Quality grading standard for Chinese and Western electronic typewriters for office affairs processing
SJ/T 10667-1995 Symbol and notation for brazing, soldering and sealing
SJ/T 9569.4-1995 Quality grading standard for high-stability R2K pot-cores
SJ/T 10668-1995 Terminology for surface mount technology
SJ/T 10659-1995 Occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts
SJ/T 10657-1995 Cabled distribution systems for television and sound signals-Methods of measurement on head equipments
SJ/T 9569.2-1995 Quality grading standard for E cores made of magnetic oxides
SJ/T 10679-1995 Fixed capaciton for use in electronic equipment. Part 12: Sectional specification: Fixed polycarbonate film dielectric metal foil d. c. capacitors
SJ/T 10676-1995 Cobalt oxide powder for electronic industry
SJ/T 31480-1995 Comparable unit output energy consumption quota for plate modulation, pulse width, and FM broadcast transmitter manufacturing products
SJ/T 10632-1995 Atomic-absorption spectrophotometry of impurties in clay, feldspar, magnesite, calcite, dolomite, talc, quartz for electron ceramic raw materials
SJ/T 10638-1995 Measurement methods for quartz crystal oscillators
SJ/T 10648-1995 Structure type and dimensions for film dielectric tuning variable capacitors
SJ/T 10674-1995 Generic specification for coating with coat
SJ/T 10615-1995 Sectional specification for signal transformers of assessed quality for use in electronic equipment for capability approval
SJ/T 31489-1995 Comparable unit output energy consumption quota for semiconductor discrete device manufacturing products
SJ/T 9568-1995 Quality grading standard for visible photosensitive devices
SJ/T 9570.1-1995 Quality grading standard for quartz crystal units
SJ/T 31481-1995 Comparable unit output energy consumption quota for micromotor manufacturing products
SJ/T 10664-1995 Technical requirements and measuring methods for electromagnetic compatibility of telephone terminal
SJ/T 10613-1995 General specification for clock and station mark generators
SJ/T 31469-1995 Energy consumption quotas for comparable unit output of black-and-white picture tube and high-resolution monochrome display tube manufacturing products
SJ/T 9570.2-1995 Quality grading standard for quartz crystal monolithic filters
SJ/T 10624-1995 Methods of life test for X-ray tubes
SJ/T 9571.4-1995 Quality grading standard for piezoelectric ceramic traps for video absorbing circuit of TV receivers
SJ/T 10612.3-1995 Aerials for the reception of sound and television broadcasting in the frequency range 30MHz to 1GHz - Part 3: Methods of measurement of mechanical properties vibration and environmen
SJ/T 10621-1995 Sealed nickel-cadmium prismatic rechargeable single cells

未注明发布机构

工业和信息化部

SJ/T 11577-2016 SJ/T 11394-2009 "Semiconductor Light Emitting Diode Test Methods" Application Guide