According to the standard curve

According to the standard curve, Total:161 items.

The international standard classification for "According to the standard curve" includes: Noise with respect to human beings .

The Chinese standard classification for "According to the standard curve" includes: Acoustic Measurement .

未注明发布机构

DIN ISO 226 E:2001-11 Acoustics - Normal equal-loudness-level contours
ASTM RR-E37-1024 1999 E1877-Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 4963-2007 Acoustics—Normal equal-loudness-level contours

Jiangsu Provincial Standard of the People's Republic of China

DB3201/T 257-2020 Pipeline Data Standard

National Health Commission of the People's Republic of China

GB 5009.25-2016 Determination of sterigmatocystin in vegetable foods
GB 5009.150-2016 National food safety standard-Determination of monascas colours in foods

Group Standards of the People's Republic of China

T/SHZSAQS 00084-2022 Formaldehyde standard curve preparation technical regulations
T/CECS 1068-2022 Reliability Appraisal Standards for Hyperbolic Cooling Towers
T/SXCAA 012-2021 Guidelines for Quality Control of Linear Calibration Curves

SE-SIS

Nr 39-1992 Curve electronics according to Swedish standards
SIS SMS 2027-1975 Dust separating. Standard curves for dust
SIS SEN 04 05 19 Electric porcelain, experimental qualitative, according to Mohs hardness standard

AASHTO - American Association of State Highway and Transportation Officials

T272-1986 Standard Method of Test for Family of Curves - One-Point Method (Nineteenth Edition; Revised Per Interim Specifications - Tests and Methods - 1999)
T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
M120-1999 Standard Specification for Zinc (Nineteeth Edition; Revised Per Interim Specifications - Specifications - 1999)
GHC-3-1993 Guide Specifications for Horizontally Curved Highway Bridges (Revised per Interim Specifications - Bridges - 1995)

AT-ON

ONORM Z 1001-2001 Identification code for the marking of pipe lines according to their content

CH-SNV

SNV 742 402.27-1971 Tested according to AASHO standard compression

British Standards Institution (BSI)

BS ISO 226:2003 Acoustics - Normal equal-loudness-level contours
BS EN 61935-2:2005 Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 2: Patch cords and work area cords

International Organization for Standardization (ISO)

ISO 226:1987 Acoustics; Normal equal-loudness level contours
ISO 226:2023 Acoustics — Normal equal-loudness-level contours
ISO 226:2003 Acoustics - Normal equal-loudness-level contours

Association Francaise de Normalisation

NF S30-003*NF ISO 226:2004 Acoustics - Normal equal-loudness-level contours
NF P61-504:1991 Ceramic tiles. Determination of scratch hardness of surface according to mohs.
NF C93-587-2:2006 Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 2 : patch cords and work area cords.
NF C93-587-1:2006 Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 1 : installed cabling.
NF K11-112:2006 Production of cheques forms standardised - Production of cheques forms standardised according to NF K11-111 standard
NF EN 61935-3:2010 Testing of symmetrical and coaxial information technology cabling - Part 3: cabling installed according to the specifications of EN 50173-4 and related standards
NF EN 61935-1:2010 Specification for testing symmetrical and coaxial cabling specific to information technology - Part 1: symmetrical cabling installed according to the EN 50173 series of standards

RU-GOST R

GOST 9735-1987 Profile grinders. Standards of accuracy

SCC

CEI 205-2:2005 Guide to twisted pair bus systems for home and building automation, according to CEI EN 50090 standards
AASHTO R 75-2016(2020) Standard Practice for Developing a Family of Curves
07/30162238 DC BS ISO 9276-3. Representation of results of particle size analysis. Part 3. Adjustment of an experimental curve to a reference model
AASHTO T 272-2004 Standard Method of Test for Family of Curves---One-Point Method
AS 1469:1973 Criteria curves for rating noise and establishing acoustic environment
BS PD CEN/TR 17238:2018 Proposed limit values for contaminants in biomethane based on health assessment criteria
AWWA ACE94166 Decision Making With Multiple Water Quality Objectives
SN-CEN/TR 17238:2018 Proposed limit values for contaminants in biomethane based on health assessment criteria
DANSK DS/CEN/TR 17238:2018 Proposed limit values for contaminants in biomethane based on health assessment criteria

National Association of Corrosion Engineers (NACE)

NACE RP0197-1997 Standard Format for Computerized Electrochemical Polarization Curve Data Files
NACE RP0197-2004 Standard Format for Computerized Electrochemical Polarization Curve Data Files Item No. 21080

GSO

BH GSO ISO 9276-3:2016 Representation of results of particle size analysis -- Part 3: Adjustment of an experimental curve to a reference model
OS GSO ISO 9276-3:2013 Representation of results of particle size analysis -- Part 3: Adjustment of an experimental curve to a reference model
OS GSO OIML R14:2014 Polarimetric saccharimeters graduated in accordance with the ICUMSA International Sugar Scale
GSO ASTM F1016:2010 Standard Practice for Linear Tire Tread wear Data Analysis
BH GSO OIML R14:2015 Polarimetric saccharimeters graduated in accordance with the ICUMSA International Sugar Scale
BH GSO ASTM F3141:2023 Standard Guide for Total Knee Replacement Loading Profiles
GSO ASTM F3141:2023 Standard Guide for Total Knee Replacement Loading Profiles

CENELEC - European Committee for Electrotechnical Standardization

EN 61935-1:2005 Testing of balanced communication cabling in accordance with standards series EN 50173 Part 1: Installed cabling

The American Road & Transportation Builders Association

AASHTO R 75-2016(R2020) Standard Practice for Developing a Family of Curves
AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method
AASHTO TP 76-2008 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method

Korean Agency for Technology and Standards (KATS)

KS I ISO 226:2014 Acoustics — Normal equal-loudness level contours
KS I ISO 226:2003 Acoustics-Normal equal-loudness level contours
KS A 0061-2015(2020) Specification of colours according to the CIE 1931 standard colorimetric system and the CIE 1964 supplementary standard colorimetric system
KS A 0061-1998 Specification of colours according to the CIE 1931 standard colorimetric system and the CIE 1964 supplementary standard colorimetric system
KS A 0061-2020 Specification of colours according to the CIE 1931 standard colorimetric system and the CIE 1964 supplementary standard colorimetric system
KS A 0061-1983 Specification of colours according to the CIE 1931 standard colorimetric system and the CIE 1964 supplementary standard colorimetric system

American Society for Testing and Materials (ASTM)

ASTM D2493/D2493M-09 Standard Viscosity-Temperature Chart for Asphalts
ASTM E1143-05(2015) Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM E561-19e1 Standard Test Method for K R Curve Determination
ASTM E1143-99 Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM E1143-05 Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM E561-21 Standard Test Method for K R Curve Determination
ASTM E561-20 Standard Test Method for K R Curve Determination
ASTM E561-19 Standard Test Method for K R Curve Determination
ASTM E1143-05(2010) Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM F1523-94 Standard Guide for Selection of Booms in Accordance With Water Body Classifications
ASTM F1523-94(2013) Standard Guide for Selection of Booms in Accordance With Water Body Classifications
ASTM F793-05 Standard Classification of Wall Covering by Durability Characteristic
ASTM E561-08e1 Standard Test Method for K-R Curve Determination
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM E561-22 Standard Test Method for K R Curve Determination
ASTM F1523-94(2018) Standard Guide for Selection of Booms in Accordance With Water Body Classifications
ASTM F1523-94(2023) Standard Guide for Selection of Booms in Accordance With Water Body Classifications
ASTM F1523-94(2001) Standard Guide for Selection of Booms in Accordance With Water Body Classifications
ASTM E561-08 Standard Test Method for K-R Curve Determination
ASTM E561-98 Standard Practice for R-Curve Determination
ASTM E561-15 Standard Test Method for K R Curve Determination
ASTM F793-06 Standard Classification of Wall Covering by Use Characteristics
ASTM E2032-09(2017) Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
ASTM E2032-09 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
ASTM E141-91(2003)e1 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
ASTM E2032-07a Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
ASTM E561-05 Standard Test Method for K-R Curve Determination
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM E2032-21 Standard Practice for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
ASTM E2032-08a Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
ASTM E561-15a Standard Test Method for K R Curve Determination
ASTM E561-10e2 Standard Test Method for K-R Curve Determination
ASTM E561-05e1 Standard Test Method for K-R Curve Determination
ASTM E2032-08 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
ASTM E2032-99e1 Standard Guide for Extension of Data From Fire Endurance Tests
ASTM E2750-17 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM
ASTM D1336-07(2011) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM F3141-23 Standard Guide for Total Knee Replacement Loading Profiles
ASTM E2032-09(2013) Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
ASTM E2750-13 Standard Guide for Extension of Data from Firestop Penetration System Tests Conducted in Accordance with ASTM
ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM E2750-22 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E561-10 Standard Test Method for K-R Curve Determination
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM E2750-13e1 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM
ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
ASTM E791-08(2022) Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
ASTM E2750-23 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM E814
ASTM E1505-92(1996) Standard Guide for Determining SIMS Relative Sensitivity Factors from Ion Implanted External Standards
ASTM E1847-96 Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines
ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM E1505-92(2001) Standard Guide for Determining SIMS Relative Sensitivity Factors from Ion Implanted External Standards
ASTM D7612-21 Standard Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources
ASTM D1336-07(2015) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D1336-97(2003) Standard Test Method for Distortion of Yarn in Woven Fabrics

HU-MSZT

MSZ 6830/30-1985 Determination of nutritional value of feed based on aflatoxin content
MSZ 11714-1969 Check lubricating oil evaporation losses according to Noyak standards

American National Standards Institute （ANSI)

ANSI/ASTM E2032:2009 Guide for Extension of Data from Fire Resistance Tests Conducted in Accordance with ASTM E119
ANSI/IEEE C37.112:1996 Standard Inverse-Time Characteristic for Overcurrent Relays

German Institute for Standardization

DIN ISO 226:2006 Acoustics - Normal equal-loudness-level contours (ISO 226:2003);English version of DIN ISO 226:2006-04
DIN 53864:1978-08 Testing of textiles; determination of the bending strength, method according to Schlenker
DIN 60900-6:1990-11 Yarns; spun yarns; systems of concepts according to spinning processes

International Electrotechnical Commission (IEC)

IEC 60446:1989 Identification of conductors by colours or numerals

Danish Standards Foundation

DS/IEC 446:1990 Identification of insulated and bare conductors by colours

ESDU - Engineering Sciences Data Unit

ESDU 76014 B-2013 Estimation of endurance and construction of constant amplitude S – N curves from related data corrected for notch and mean stress effects
ESDU 76014 B-1993 Estimation of endurance and construction of constant amplitude SN curves from related data corrected for notch and mean stress effects.

CZ-CSN

CSN ON 24 1479-1963 Reduced ferrule connector) according to Czech National Standard 24 1481
CSN ON 24 1468-1963 Pressure reducing sleeve clutch*) according to Czech national standards 24 1477 and 24, 1465 and 67

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications

ERC/DEC/(98)05-1998 European Radiocommunications Committee - ERC Decision of 20 March 1998 on the Adoption of Approval Regulations for Short Range Devices Operating in the Frequency Range 25 to 1000 MHz with Power Levels of Up to 500 mW Based on the European Standard (Teleco

Society of Automotive Engineers (SAE)

SAE J739-1991 Cutting Edge - Curved Grader, Standard June 1991

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

ITU-R M.2009-2-2019 Radio interface standards for use by public protection and disaster relief operations in accordance with Resolution 646 (Rev.WRC-15)

Institute of Electrical and Electronics Engineers (IEEE)

IEEE SA 3D Body Processing Industry Connections--Functional Anatomy, Terms, and Common Foot Conditio IEEE SA 3D Body Processing Industry Connections--Functional Anatomy, Terms, and Common Foot Conditions
IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions

Defense Logistics Agency

DLA DSCC-DWG-88013 REV F-2005 DELAY LINES, PASSIVE, 3-PIN, SIP

European Association of Aerospace Industries

AECMA PREN 4008-007-1996 Aerospace Series Elements of Electrical and Optical Connection General Accessories and Tooling Part 007 - Positioner for Crimping Tool M22520/2-01 Electrical Contacts According to EN 3155-016 Product Standard
AECMA PREN 4008-008-1996 Aerospace Series Elements of Electrical and Optical Connection General Accessories and Tooling Positioner for Crimping Tool M22520/7-01 Electrical Contacts According to EN 3155-016 Part 008 - Product Standard

IT-UNI

UNI S 195-1943 Insulation material standards. Numerical charts and graphs

Association of German Mechanical Engineers

DVS 1622 Beiblatt 2-2006 Adjustment of DIN 6700 to new standards - Fusion-welded joints on aluminium and its alloys
DVS 0716-1997 Product requirements according to European guidelines and standards for welding operation requirements

European Committee for Standardization (CEN)

prHD 324 S2-1992 Identification of conductors by colours or numerals (IEC 446:1989)

ES-UNE

UNE 22988:2022 Digital declaration of performance for natural stone products according to the Standard EN 12058:2004

GB-REG

REG 29 CFR PART 2575-2011 ADJUSTMENT OF CIVIL PENALTIES UNDER ERISA TITLE I

ICEA - Insulated Cable Engineers Association Inc.

S-81-570-2005-2005 Standard for 600 Volt Rated Cables of Ruggedized Design for Direct Burial Installations as Single Conductors or Assemblies of Single Conductors
S-81-570-2001-2002 Standard for 600 Volt Rated Cables of Ruggedized Design for Direct Burial Installations as Single Conductors or Assemblies of Single Conductors

DE-VDA

VDA 250-2013 Material laboratory assessment (for more in-depth assessment based on ISO/TS 16949)

CU-NC

NC 93-04-101-1987 Standards System for Environment Protection. Soils. Classification According to Use

PK-PSQCA

PS 122-1985 PAKISTAN STANDARD METHOD FOR THE DETERMINATION OF CRIMP OF YARN IN FABRIC

VN-TCVN

TCVN 6019-2010 Standard practice for calculating viscosity index from kinematic viscosity at 40 degrees celsius and 100 degrees celsius.

Japanese Industrial Standards Committee (JISC)

JIS A 3302:1988 Estimation of population for waste water purifier of buildings