Energy spectrum analysis industry

Energy spectrum analysis industry, Total:119 items.

The international standard classification for "Energy spectrum analysis industry" includes: Chemical analysis , Other standards related to analytical chemistry , Optical equipment , Radiation protection , Medical Sciences and health care facilities in general , Geology. Meteorology. Hydrology , Optical measuring instruments , Extraction and processing of petroleum and natural gas .

The Chinese standard classification for "Energy spectrum analysis industry" includes: Basic standards and general methods , Electrochemical, thermochemistry and optical profile type analyzer , Electron optics and other physical optics instrument , Radiological sanitation protection , Oceanology , Petroleum extraction .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 29732-2021 Surface chemical analysis—Medium resolution auger electron spectrometers—Calibration of energy scales for elemental analysis
GB/T 41072-2021 Surface chemical analysis - Electron spectroscopies - Guidelines for ultraviolet photoelectron spectroscopy analysis
GB/T 41074-2021 Microbeam analysis―Method of specimen preparation for analysis of general powders using WDS and EDS

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16140-1995 Gamma spectrometry method for analysis of radionuclides in water
GB/T 42256-2022 Determination of ruthenium-106 in seawater─Gamma spectrometry
GB/T 11713-2015 General analytical methods of high-purity germanium gamma spectrometer
GB/T 29556-2013 Surface chemical analysis—Auger electron spectroscopy and X-ray photoelectron spectroscopy—Determination of lateral resolution,analysis area, and sample area viewed by the analyser
GB/T 17359-2012 Microbeam analysis - Quantitative analysis using energy dispersive spectrometry
GB/T 26533-2011 General rules for Auger electron spectroscopic analysis
GB/T 19500-2004 General rules for X-ray photoelectron spectroscopic analysis method
GB/Z 32494-2016 Surface chemical analysis—Auger electron spectroscopy—Derivation of chemical information
GB/T 30704-2014 Surface chemical analysis―X-ray photoelectron spectroscopy―Guidelines for analysis
GB/T 15244-2013 Microbeam analysis—Quantitative analysis of silicate glass by wavelength dispersive X-ray spectrometry and energy dispersive X-ray spectrometry
GB/T 16141-1995 Analytical method for radionuclides by alpha spectrometry

Professional Standard - Petroleum

SY/T 5252-2002 Natural gamma spectrographic method of analysing for core sample
SY/T 6189-1996 Quantitative Analysis of Energy Spectra for Minerals in Rocks
SY/T 6189-2018 Quantitative analysis method for rock minerals by X-ray energy spectrum (EDS)

National Metrological Verification Regulations of the People's Republic of China

JJG(电子) 07005-1988 QF4021 High Frequency Spectrum Analyzer Trial Verification Regulations

未注明发布机构

DIN EN 27941 Commercial propane and butane; analysis by gas chromatography
DIN ISO 22309 E:2015-05 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above

Shandong Provincial Standard of the People's Republic of China

DB37/T 2204-2012 Energy Data Analysis Method for Industrial Enterprises

Group Standards of the People's Republic of China

T/HNPCIA 29-2023 Analysis of industrial 6-aminohexonitrile by gas chromatography
T/QGCML 4501-2024 User behavior intelligent analysis and optimization system
T/CEACI A0006-2023 The core physico-chemical testing capability requirement for analyzing & testing personnel of inspection industry
T/CARD 013-2021 Applied Behavior Analyst Skill Requirements
T/CSTM 00964-2022 General rules for performance evaluation of atomic spectrometer

SCC

BS ISO 22309:2006 Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS)
BS PD ISO/TR 19319:2003 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Determination of lateral resolution, analysis area, and sample area viewed by the analyser
BS ISO 18118:2004 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
09/30191895 DC BS ISO 10810. Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
BS ISO 17973:2002 Surface chemical analysis. Medium-resolution Auger electron spectrometers. Calibration of energy scales for elemental analysis

Korean Agency for Technology and Standards (KATS)

KS D ISO 22309-2011(2016) Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
KS D ISO 22309-2011(2021) Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
KS D ISO 22309-2021 Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
KS D 2518-2005 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS D 2518-1982 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS M 0127-2022 Technical terms for analytical chemistry(Chromatography part)
KS D ISO 19319-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Determination of lateral resolution, analysis area, and sample area viewed by the analyzer
KS D ISO 17973-2021 Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis
KS D ISO 19319-2020 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Determination of lateral resolution, analysis area, and sample area viewed by the analyzer
KS D ISO 17973-2011(2016) Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis
KS D ISO 19319:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Determination of lateral resolution, analysis area, and sample area viewed by the analyzer
KS D ISO 22309:2011 Microbeam analysis-Quantitative analysis using energy-dispersive spectrometry(EDS)

HU-MSZT

MSZ 8778-1958 industry analysis
MSZ 8769-1958 Steel Industry Analysis

International Organization for Standardization (ISO)

ISO 22309:2006 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS)
ISO 24639:2022 Microbeam analysis — Analytical electron microscopy — Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
ISO 10810:2019 Surface chemical analysis — X-ray photoelectron spectroscopy — Guidelines for analysis
ISO 18554:2016 Surface chemical analysis - Electron spectroscopies - Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
ISO 23420:2021 Microbeam analysis — Analytical electron microscopy — Method for the determination of energy resolution for electron energy loss spectrum analysis
ISO/DIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO/DIS 17973:2023 Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental analysis
ISO 10810:2010 Surface chemical analysis - X-ray photoelectron spectroscopy - Guidelines for analysis
ISO/FDIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 7941:1988 Commercial propane and butane; analysis by gas chromatography
ISO/TR 19319:2003 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution, analysis area, and sample area viewed by the analyser
ISO/CD 17973 Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental analysis
ISO 22309:2011 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above

RU-GOST R

GOST 16273.1-1985 Technical selenium. Method of spectral analysis
GOST 9816.4-1984 Technical tellurium. Method of spectral analysis
GOST 16273.0-1985 Technical selenium. General requirements for method of spectral analysis

(U.S.) Ford Automotive Standards

FORD FLTM EU-AJ 051-01-2000 METHOD OF CARBON TYPE ANALYSIS OF LUBRICATING OILS BY INFRARED SPECTROSCOPY

IN-BIS

IS 11148-1984 Spectrum Analyzer Performance

British Standards Institution (BSI)

BS ISO 11938:2012 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
BS ISO 10810:2019 Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
BS ISO 23420:2021 Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
BS ISO 18554:2016 Surface chemical analysis. Electron spectroscopies. Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
BS ISO 22309:2011 Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
BS ISO 10810:2010 Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
BS ISO 18118:2015 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS ISO 18118:2024 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
23/30461294 DC BS ISO 18118. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS ISO 24639:2022 Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
20/30380369 DC BS ISO 23420. Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
BS ISO 13084:2018 Surface chemical analysis. Secondary ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
BS ISO 17973:2016 Surface chemical analysis. Medium-resolution Auger electron spectrometers. Calibration of energy scales for elemental analysis

Japanese Industrial Standards Committee (JISC)

JIS Z 8826:2005 Particle size analysis -- Photon correlation spectroscopy

RO-ASRO

STAS 1706/1-1985 COPPKH General directions for c?emical and spectral analysis carrying-out
STAS 10274/1-1983 Solid fuels ASH ANALYSIS General directions for spectral and chemical analysis carrying out
STAS 1776/14-1978 LEAD Emission spectral analysis with direct reading

CZ-CSN

CSN 42 1211-1986 The sampling of technical iron for spectrometric and chemical analysis

GSO

GSO ISO 10810:2013 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Guidelines for analysis
OS GSO ISO 10810:2013 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Guidelines for analysis
BH GSO ISO 10810:2016 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Guidelines for analysis
GSO ISO 18118:2013 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
OS GSO ISO 18118:2013 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
GSO ISO 24639:2024 Microbeam analysis — Analytical electron microscopy — Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
BH GSO ISO 18118:2016 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
OS GSO ISO 22309:2015 Microbeam analysis -- Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
BH GSO ISO 17973:2016 Surface chemical analysis -- Medium-resolution Auger electron spectrometers -- Calibration of energy scales for elemental analysis
GSO ISO 17973:2013 Surface chemical analysis -- Medium-resolution Auger electron spectrometers -- Calibration of energy scales for elemental analysis
OS GSO ISO 17973:2013 Surface chemical analysis -- Medium-resolution Auger electron spectrometers -- Calibration of energy scales for elemental analysis
GSO ISO 22309:2015 Microbeam analysis -- Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
OS GSO ISO 13424:2015 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Reporting of results of thin-film analysis
GSO ISO 13424:2015 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Reporting of results of thin-film analysis
OS GSO ISO 11938:2015 Microbeam analysis -- Electron probe microanalysis -- Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy

Association Francaise de Normalisation

NF EN 27941:1994 Propanes et butanes commerciaux - Analyse par chromatographie en phase gazeuse
NF M41-013*NF EN 27941:1994 Commercial propane and butane. Analysis by gas chromatography.
NF X20-302:1974 Gas analysis by mass spectrometry. Determination of gas chemical composition.
NF X21-071:2011 Surface Chemical Analysis - X-ray photoelectron Spectroscopy - Guidelines for analysis.
NF ISO 22309:2012 Microbeam Analysis – Quantitative elemental analysis by energy selective spectrometry (EDS) of elements having an atomic number of 11 (Na) or greater
FD X50-159:2013 Functional analysis and value analysis - Practical guide for very small-sized businesses and SMEs - Application guide for the "functional analysis and value analysis" approach
NF ISO 17973:2006 Analyse chimique des surfaces - Spectromètres d'électrons Auger à résolution moyenne - Étalonnage des échelles d'énergie pour l'analyse élémentaire

American Society for Testing and Materials (ASTM)

ASTM C696-11 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
ASTM E1508-98 Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM E1508-98(2003) Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM E1508-12a(2019) Standard guide for quantitative analysis using energy dispersive spectroscopy
ASTM E1508-12a Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM E996-94(1999) Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM E1508-98(2008) Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM E1508-12 Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM D4492-10 Standard Test Method for Analysis of Benzene by Gas Chromatography

BE-NBN

NBN T 97-203-1982 Natural gas - Simple analysis by gas chromatography
NBN-ISO 7941:1991 Commercial propane and butane - Analysis by gas chromalography

German Institute for Standardization

DIN ISO 22309:2015-11 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above (ISO 22309:2011)

SE-SIS

SIS SS-ISO 7941:1990 Commercial propane and butane — Analysis by gas chromatography

ES-AENOR

UNE 70-105 Pt.7-1986 Determination of maleic anhydride in phthalic anhydride for industrial use (by means of polarographic analyzer)

PT-IPQ

NP 3180-1987 Refined oil. Gas Chromatography in a Column

Standard Association of Australia （SAA）

AS 3741:1990 Recommended practice for chemical analysis by ion chromatography

Others: Energy spectrum analysis,About Spectroscopy,Electron microscopy analysis,Spectroscopy Standard,ESEM,Electron spectroscopy,energy spectrum analysis,,Energy Spectrum Analysis Center,Spectrum Analysis Conditions,Spectroscopy data,Spectroscopy elements,x energy spectrum analysis,.Energy spectrum analysis,spectral analysis,What can energy spectrum analysis analyze,fast energy spectrum analysis,Energy Spectrum Analysis Method,energy spectrum analysis