Gel fraction test

Gel fraction test, Total:148 items.

The international standard classification for "Gel fraction test" includes: Adhesives , Latex and raw rubber , Biology. Botany. Zoology , Reinforced plastics , Animal feeding stuffs .

The Chinese standard classification for "Gel fraction test" includes: Nonmetallic materials used for aviation and aerospace , Forestry chemical raw material , Biochemical reagent and clinical analysis reagent , Livestock and poultry feed and additive .

Group Standards of the People's Republic of China

T/CECS 10189-2022 Concrete Water Reducer Molecular Weight Test Gel Permeation Chromatography

未注明发布机构

SEMI F54-1000 (Reapproved 1110)-2010 TEST METHOD FOR MEASURING THE COUNTING EFFICIENCY OF CONDENSATION NUCLEUS COUNTERS
DIN EN 12390-16 E:2018-04 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete
AS/NZS 2098.11:2005(R2016) Methods of test for veneer and plywood - Determination of formaldehyde emissions for plywood
ASTM RR-D11-1012 1977 D3616-Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity

Professional Standard - Aerospace

QJ 1523-1988 Test Method for Resistivity of Conducting Resin

Professional Standard - Chemical Industry

HG/T 2724.4-1995 Determination of Stress Retention by Rubber Thread Test Method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37498-2019 Rubber,raw natural—Determination of the gel content of technically specified rubber (TSR)

Military Standard of the People's Republic of China-General Armament Department

GJB 1059.4-1990 Test methods of phenolic resin for ablative materials--Test of gelation time
GJB 1059.4A-2020 Test methods of phenolic resin for ablative materials—Part 4：Test of gelation time

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34794-2017 Guidelines for DNA gel purification kit

Professional Standard - Petrochemical Industry

SH/T 1050-2014 Determination of gel content of raw synthetic
SH/T 1050-1991 Determination of gel content of raw synthetic rubber

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13080.2-2005 Determination of
GB/T 32788.1-2016 Test method for properties of prepreg―Part 1:Determination of gel time

National Metrological Verification Regulations of the People's Republic of China

JJG 159-2020 Concrete resistivity tester

Professional Standard - Textile

FZ/T 40004-2023 Test method for sericin content in silk

SE-SIS

SIS SS 13 21 13-1978 Concrete testing - Aggregate - Moisture ratio
SIS SS 13 72 15-1978 Concrete testing — Hardened concrete — Shrinkage

ES-UNE

UNE-EN 12390-16:2020 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete
UNE-EN 12390-19:2023 Testing of hardened concrete - Part 19: Determination of electrical resistivity

CEN - European Committee for Standardization

PREN 12390-16-2018 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete

(U.S.) Ford Automotive Standards

FORD FLTM BU 016-1-2000 WATER ABSORPTION TEST FOR TAPES

Association Francaise de Normalisation

NF EN ISO 15720:2001 Metallic coatings - Porosity testing - Porosity of gold or palladium coatings on metals by gel electrography
NF EN 12390-16:2019 Essais pour béton durci - Partie 16 : détermination du retrait du béton
XP P18-481:2022 Test on hardened concrete - Measurement of electrical resistivity
NF EN 12390-19:2023 Tests for hardened concrete - Part 19: determination of electrical resistivity
NF P18-447:2005 Testing concrete - Part 4 : determination of ultrasonic pulse velocity.
NF P18-459:2022 Concrete - Test for hardened concrete - Porosity and density test
NF P18-414:2017 Testing of concretes - Non destructive testing - Measurement of the dominant resonance frequency
NF B57-058*NF ISO 8507:2002 Agglomerated cork discs -Test methods
NF EN 666:1995 Resilient Flooring – Determination of Gelling
NF B57-043:1974 Expanded pure agglomerated cork. Determination of moisture content.
NF T42-010*NF ISO 706:2005 Rubber latex - Determination of coagulum content (sieve residue)

German Institute for Standardization

DIN EN 12390-16:2019-12 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete; German version EN 12390-16:2019
DIN EN 12390-16:2019 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete
DIN EN 12504-5:2023 Testing concrete in structures - Part 5: Determination of concrete cover using electromagnetic covermeters; German and English version prEN 12504-5:2023
DIN EN 12390-19:2023-07 Testing of hardened concrete - Part 19: Determination of electrical resistivity; German version EN 12390-19:2023
DIN EN 12390-19:2023 Testing of hardened concrete - Part 19: Determination of electrical resistivity
DIN EN ISO 15720:2001-08 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001); German version EN ISO 15720:2001
DIN EN 14187-1:2003 Cold applied joint sealants - Part 1: Test method for the determination of rate of cure; German version EN 14187-1:2003

SCC

DANSK DS/EN 12390-16:2019 Testing hardened concrete – Part 16: Determination of the shrinkage of concrete
AENOR UNE-EN 12390-16:2020 Hardened concrete tests. Part 16: Determination of concrete shrinkage.
DIN EN 12390-16 E:2018 Draft Document - Testing hardened concrete - Part 16: Determination of the shrinkage of concrete; German and English version prEN 12390-16:2018
BS 6057-3-3.8:1981 Rubber latices. Methods of test-Determination of coagulum content of rubber latices
DANSK DS/EN ISO 15720:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
DIN EN 12390-19 E:2021 Draft Document – Testing of hardened concrete – Part 19: Determination of resistivity; German and English version prEN 12390-19:2021
NS-EN ISO 15720:2001 Metallic coatings — Porosity tests — Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001)
AS 1635.6.1:1974 Methods of testing pressure sensitive adhesive tape - Elongation
11/30242744 DC BS 1881-122. Testing concrete. Part 122. Method for determination of water absorption
BS 6057-3.8:1987 Rubber latices. Methods of test-Determination of coagulum content (sieve residue)
AENOR UNE-ISO 2921:2017 Vulcanized rubber. Determination of shrinkage at low temperature (TR test).
BS 903-A29:1973 Methods of testing vulcanized rubber. Determination of low retraction (TR test)
UNE 83993-1:2009 Durability of concrete. Test method. Measurement of carbonation penetration rate in hardened concrete. Part 1: Natural method.
BS 2044:1978 Laboratory tests for resistivity of conducting and antistatic rubbers
UNE 53610:1983 RUBBER LATICES. DETERMINATION OF COAGULUM CONTENT
BS 4191C:1976 Specification for microform readers. Microform reader resolution test film
BS 2044:1953 Tests for resistivity of conductive and anti-static rubbers
VDI 3491 BLATT 4-2018 Measuring particles — Preparation methods for test aerosols — Condensation method
VDI 3491 BLATT 4-2018 Measuring particles — Preparation methods for test aerosols — Condensation method

RO-ASRO

STAS 2833-1980 Tests of concretes. DETERMINAT ION OF AXIAL SHRINKAGE OF HARDENED CONCRETE
STAS 4606-1980 NATURAL HEAVY WEIGHT AGGPEGATES FOR MORTARS AND CONCRETE W1TH MINERAL BINDING MATERIAL Testing methodo s

British Standards Institution (BSI)

BS 1881-122:2011+A1:2020 Testing concrete - Method for determination of water absorption
BS EN 12390-19:2023 Testing of hardened concrete — Determination of electrical resistivity
20/30419890 DC BS 1881 122 AMD1. Testing Concrete. Part 122. Method for determination of water absorption
BS EN ISO 15720:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
23/30478065 DC BS EN 12504-5. Testing concrete in structures - Part 5. Determination of concrete cover using electromagnetic covermeters
BS 5350-B5:1976 Methods of test for adhesives - Determination of gelation time
BS 1881-204:1988(1998) Testing concrete — Part 204 : Recommendations on the use of electromagnetic covermeters
BS EN 12504-4:2004 Testing concrete - Determination of ultrasonic pulse velocity
21/30440241 DC BS EN 12390-19. Testing of hardened concrete. Part 19. Determination of resistivity
BS 2782-8 Method 835C:1980 Methods of testing plastics - Other properties - Determination of gelation time of polyester and epoxide resins using a gel timer
BS ISO 17785-2:2018 Testing methods for pervious concrete - Density and void content
14/30266738 DC BS ISO 17785-1. Test methods for pervious concrete. Part 1. Infiltration rate
BS 3900-J3:1998 Methods of test for paints - Testing of coating powders - Determination of gel time of coating powders
BS EN 14187-1:2003 Cold applied joint sealants - Test method for the determination of rate of cure
BS ISO 15040:1999 Composites - Prepregs - Determination of gel time

American Society for Testing and Materials (ASTM)

ASTM D2765-11 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
ASTM D8329-21 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Materi
ASTM D8329-20 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Materi
ASTM D7060-04 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
ASTM D3351-93 Standard Test Method for Gel Count of Plastic Film
ASTM D3596-14 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
ASTM C1585-20 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
ASTM D3056-05(2010) Standard Test Method for Gel Time of Solventless Varnishes
ASTM D3056-14(2018) Standard Test Method for Gel Time of Solventless Varnishes
ASTM D7060-12(2014) Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
ASTM C1016-02 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
ASTM C1241-14 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM D7060-05 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
ASTM B798-95(2020) Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
ASTM D2739-97 Standard Test Method for Volume Resistivity of Conductive Adhesives
ASTM B798-95(2000) Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
ASTM C1241-00 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM C1241-00(2009) Standard Test Method for Volume Shrinkage of Latex Sealants During Cure

Indonesia Standards

SNI 01-3735-1995 Specification and test method of gelatin

Danish Standards Foundation

DS/EN ISO 15720:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
DS 423.15:1984 Testing of concrete. Determination of the content of airvoid in fresh concrete
DS 423.42:2002 Testing of concrete - Hardened concrete - Concrete composition

European Committee for Standardization (CEN)

prEN 12390-19-2021 Testing of hardened concrete - Part 19: Determination of resistivity

Korean Agency for Technology and Standards (KATS)

KS M 6402-2018 Testing methods of wet gel strength for compounded latex
KS M 6402-1988 Testing methods of wet gel strength for compounded latex
KS M 6402-2008 Testing methods of wet gel strength for compounded latex

IN-BIS

IS 10016 Pt.5-1981 Test Methods for Polybutadiene Rubber Part V Determination of Gel Content
IS 9316 Pt.3-1987 Test methods for rubber latex Part 3 Determination of aggregate content (sieve residue) [RL: 3]

GSO

OS GSO ISO 15720:2013 Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
BH GSO ISO 15720:2016 Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
NB/T 11535-2024 Test method for determination of rebound rate of shotcrete
OS GSO ISO 2921:2015 Rubber, vulcanized -- Determination of low-temperature retraction (TR test)
GSO ISO 2921:2015 Rubber, vulcanized -- Determination of low-temperature retraction (TR test)
BH GSO ISO 17785-1:2022 Testing methods for pervious concrete — Part 1: Infiltration rate
GSO ISO 17785-1:2021 Testing methods for pervious concrete — Part 1: Infiltration rate
BH GSO 2165:2012 Chemical cleaners - Gel cleaner for multi-uses – Test methods
OS GSO 2165:2011 Chemical cleaners - Gel cleaner for multi-uses – Test methods
GSO 2165:2011 Chemical cleaners - Gel cleaner for multi-uses – Test methods

Lithuanian Standards Office

LST EN ISO 15720:2002 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001)

AENOR

UNE-EN ISO 15720:2002 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography. (ISO 15720:2001)
UNE 83980:2014 Concrete durability. Test methods. Determination of the water absorption, density and accessible porosity for water in concrete.
UNE 83988-1:2008 Concrete durability. Test methods. Determination of the electrical resistivity. Part 1: Direct test (reference method).
UNE 83993-2:2013 Durability of concrete. Test method. Measurement of carbonation penetration rate in hardened concrete. Part 2: Accelerated method.
UNE 83993-1:2013 Durability of concrete. Test method. Measurement of carbonation penetration rate in hardened concrete. Part 1: Natural method.

US-FCR

FCR COE CRD-C 36-73-1973 HANDBOOK FOR CONCRETE AND CEMENT METHOD OF TEST FOR THERMAL DIFFUSIVITY OF CONCRETE

ZA-SANS

SANS 6085:2006 Concrete tests - Initial drying shrinkage and wetting expansion of concrete

BR-ABNT

ABNT P-MB-277-1964 Tung oil condenses. Glue test

PL-PKN

PN C04211-12-1989 Test methods of natural rubber latex Determination of coagulum content

TR-TSE

TS 3152-1978 Rubber Latices - Determination Of Coagulum

PT-IPQ

NP 2915-1988 Rubber, vulcanized Determination of tensile stress-strain properties

RU-GOST R

GOST 24923-1981 Latexes. Determination of coagulum content
GOST R 57779-2017 Plastics. Phenolic resins. Determination of gel time on a test plate
GOST 28643-1990 Rubber latex. Determination of coagulum content (sieve residue)
GOST 10181.3-1981 Concrete mixture. Test method of determination of porosity
GOST 25183.8-1982 Photographic gelatine. Method of determination of jelly hardness

The American Road & Transportation Builders Association

AASHTO T 402-2023 Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test
AASHTO TP 119-2021 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test
AASHTO TP 119-2015 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test

Standard Association of Australia （SAA）

AS/NZS 2098.11:2005 Methods of test for veneer and plywood - Determination of formaldehyde emissions for plywood

KR-KS

KS M 6402-2018(2023) Testing methods of wet gel strength for compounded latex

BE-NBN

NBN B 15-230-1976 Concrete test. Non-destructive testing of resonance frequency measurements

International Organization for Standardization (ISO)

ISO 706:1975 Title missing - Legacy paper document
ISO 706:1976 Rubber latices — Determination of coagulum content
ISO 2921:1975 Title missing - Legacy paper document
ISO 2921:2011 Rubber, vulcanized - Determination of low-temperature retraction (TR test)
ISO 8507:1986 Agglomerated cork discs; Methods of test

VDI - Verein Deutscher Ingenieure

VDI 3491 BLATT 4-2016 Messen von Partikeln - Herstellungsverfahren fuer Pruefaerosole - Kondensationsverfahren

IX-SA

AS 1012 Pt.13:1970 Test method for determination of dry shrinkage of concrete in metric units

Japanese Industrial Standards Committee (JISC)

JIS A 1119:1998 Method of test for variability of constituents in freshly mixed concrete

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 3842-1995 Fractional Aerosol Filtration Efficiency Test Method for Ventilation Air Cleaners

AASHTO - American Association of State Highway and Transportation Officials

TP 119-2015 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test

Others: