Fiber material temperature resistance test

Fiber material temperature resistance test, Total:242 items.

The international standard classification for "Fiber material temperature resistance test" includes: Reinforced plastics , Textile glass materials , Man-made fibres , Refractories , Plastics in general , Pigments and extenders , Advanced ceramics .

The Chinese standard classification for "Fiber material temperature resistance test" includes: Fibre reinforced composites , Glass fibre , Chemical fibre in general , Refractory fibre , Basic standards and general methods for synthetic resin and plastic , Dye intermediate , Fireproof material in general , Special ceramics .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34551-2017 Test method for alkali resistance of glass fiber reinforced polymer bars in high temperature condition
GB/T 33832-2017 Determination of water resistance of glass fiber

Jilin Provincial Standard of the People's Republic of China

DB22/T 2410-2015 Test method for acid and alkali resistance of polyimide fiber
DB22/T 2409-2015 Test method for high temperature resistance of polyimide fiber

Group Standards of the People's Republic of China

T/HEBQIA 104-2022 Cellulose fibers for friction brake materials
T/QGCML 2439-2023 High temperature resistant PTFE fiber cloth dust filter bag
T/CSRA 10.1-2021 Test method for aging resistance of aramid Ⅲ Part 1: high temperature resistance test method
T/CSRA 15.4-2021 Test method for aging resistance of aramid fiber Ⅲ reinforced materials Part 4: salt spray resistance test method
T/CSRA 15.1-2021 Test method for aging resistance of aramid fiber Ⅲ reinforced materials Part 1: high temperature resistance test method
T/GDC 105-2021 Hydraulic abrasion resistant inorganic high performance fiber composites
T/SSAE 24-2023 Determination of Refractory Ceramic Fibres (RCF) and Asbestos in automobiles materials
T/CNS 84-2022 Estimate method of irradiation performance on heat preservation fibre fabric
T/JSTES 18-2023 Test method for erosion resistance of glass fibre filter material -Weight loss method
T/CSTM 00653-2022 Test method for mechanical properties of fiber reinforced polymer matrix composites at ultra - low temperatures
T/GDC 90-2021 High performance fiber reinforced inorganic composite mixtures
T/CSRA 15.2-2021 Test method for aging resistance of aramid fiberⅢreinforced materials Part 2: temperature shock test method

Military Standard of the People's Republic of China-General Armament Department

GJB 10311-2021 Test method for high temperature mechanical properties of continuous fiber reinforced ceramic matrix composites
GJB 8737-2015 Test method for normal temperature compression properties of continuous fiber reinforced ceramic matrix composites
GJB 1715-1993 Test method for medium temperature specific heat capacity of fibrous and powdery materials
GJB 8736-2015 Test method for tensile properties at room temperature of continuous fiber reinforced ceramic matrix composites

Professional Standard - Textile

FZ/T 50026-2014 Test method for the acid-proof,alkali-proof and high temperature resistant performance of polyphenylene sulfide fiber

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9979-2005 rule of test for mechanical properties of fiber - Reinforced plastics at elevated and reduced temperatures
GB/T 32376-2015 Elastic constants test method for fibre reinforced composites
GB/T 9339-1988 Determination of the acidic or basic hydrolizing properties on the linkage between the reactive dyes and the cellulosic fibers
GB/T 10703-1989 Test method accelerated for resistance of glass fiber reinforced plastics to water
GB/T 18301-2001 Test method for abrasion resistance of refractory materials at room temperature
GB/T 38515-2020 The method for high temperature mechanical properties of quartz fabric-reinforced resin matrix composite materials
GB/T 42920-2023 Plastics—Assessment of the fire characteristics and fire performance of fibre-reinforced plastic composites
GB/T 18301-2012 Refractory products - Determination of resistance to abrasion at ambient temperature
GB 9339-1988 Determination of the acidic or basic hydrolizing properties on the linkage between the reactive dyes and the cellulosic fibers
GB/T 41879-2022 Plastics—Burning behaviour—Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
GB/T 17911-2006 Refractory products - Methods of test for ceramic fibre products
GB/T 38534-2020 Test method for tensile properties of oriented fibre reinforced polymer matrix composite materials at ultra-low temperature
GB/T 9339-2006 Reactive dyes - the linkage between the dyes and the cellulosic fibers - Determination of the acidic or basic hydrolizing properties
GB/T 43113-2023 Standard practices for evaluating the hydrothermal resistance of carbon fiber reinforced polymer composites
GB/T 3003-2006 Refractory - Ceramic fibre and the products
GB/T 2575-1989 Test method for resistance of glass fiber reinforced plastics to water
GB/T 9979-1988 Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures
GB/T 42655-2023 Test method for compression properties of continuous fiber reinforced ceramic matrix composites at high temperature
GB/T 9339-2014 Reactive dyes―The linkage between the dyes and the cellulosic fibers―Determination of the acidic or basic hydrolizing properties

未注明发布机构

DIN V 18165-1:2002 Fiber insulation materials for construction Part 1: Insulation materials for thermal insulation
ASTM RR-C16-1043 2015 C0209-Test Methods for Cellulosic Fiber Insulating Board
ASTM RR-C16-1033 2007 C0209-Test Methods for Cellulosic Fiber Insulating Board
ASTM RR-C08-1019 2006 C0704- Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
DIN CEN/TS 17158:2018*DIN SPEC 68158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material

工业和信息化部

JC/T 2510-2019 Fiber reinforced composite insulation board
JC/T 2404-2017 Test method for tensile behaviour of continuous fiber-reinforced ceramic composites at room temperature
JC/T 2406-2017 Test methord for compression behaviour of continuous fiber reinforced ceramic matrix composites at room temperature

Chongqing Provincial Standard of the People's Republic of China

DB50/T 578-2015 Ultrafine glass fiber thermal insulation material

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 6475-2008 Test method for tensile properties of continuous fiber-reinforced ceramic composites at ambient temperature
GJB 6476-2008 Test method for compressive properties of continuous fiber-reinforced ceramic composites at ambient temperature

Taiwan Provincial Standard of the People's Republic of China

CNS 14517-1-2001 Glossary of terms used in fiber-part 1 : natural fibers
CNS 14517.2-2001 Glossary of terms used in fiber-part 2:man-made fiber
CNS 14517.3-2001 Glossary of terms used in fiber-part 3:materials except natural and man-made fiber
CNS 14517-2-2001 Glossary of terms used in fiber-part 2:man-made fiber
CNS 14517.1-2001 Glossary of terms used in fiber-part 1 : natural fibers
CNS 14517-3-2001 Glossary of terms used in fiber-part 3:materials except natural and man-made fiber
CNS 12061-1997 Cellulosic fiber loose fill thermal insulation

Shanxi Provincial Standard of the People's Republic of China

DB14/T 1722-2018 Technical Requirements for Durability Application of Carbon Fiber Composite Sheets for Bridge Reinforcement

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1608-2015 Inorganic High Performance Fiber Composite Materials

SCC

AENOR UNE 53316:2012 Plastic materials. Determination of the chemical resistance of plastic materials reinforced with fiberglass.
DIN 53133 E:2015 Draft Document - Testing of board - Determination of water resistance of glue bond of corrugated fibreboard
CSA A101-M1977-1977 Mineral Thermal Fibre Building Insulation
CAN/ULC-S130:2018(C2023) STANDARD METHOD FOR TEST FOR IGNITION RESISTANCE OF LOOSELY FILLED CELLULOSIC THERMAL INSULATION (CIGARETTE METHOD)
AENOR UNE 53099:1959 PLASTIC MATERIALS. CELLULOSE ACETATE TEST METHODS
AS 1774.28:1998 Refractories and refractory materials - Physical test methods, Method 28: Ceramic fibre products - Test methods
AENOR UNE 53292:1977 Plastic materials. Crash resistance test of fiberglass reinforced polyesters.
CSA Z5100-2017(R2022) Cellulosic nanomaterials - Test methods for characterization
CSA Z5100-14:2014 Cellulosic nanomaterials - Test methods for characterization
CAN/CSA-Z5100-2017 Cellulose nanomaterials — Test methods for characterization
AENOR UNE-EN 15930:2011 Fibers - Elasticity of fibers - Test methods
DANSK DS/EN 15930:2010 Fibres - Elasticity of fibres - Test methods
DIN EN 15930 E:2009 Draft Document - Fibres - Elasticity of fibres - Test methods; German version prEN 15930:2009
BS PD CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)). Determination of particle size of lignocellosic material
AS R31.2:1966 Physical testing of refractories and refractory materials, Method 2: Determination of cold crushing strength of insulating bricks
DANSK DS/EN ISO 14125:1998 Fibre-reinforced plastic composites - Determination of flexural properties
AENOR UNE 53342 EX:1978 Plastic materials. Rigid polyester ditches reinforced with fiberglass. Characteristics and test methods.
BS EN ISO 306:2004 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
DANSK DS/EN ISO 306:2013 Plastics – Thermoplastic materials – Determination of Vicat softening temperature (VST)
BS EN ISO 306:1997 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
SN-CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) — Determination of particle size of lignocellosic material
DANSK DS/ISO 306:2022 Plastics – Thermoplastic materials – Determination of Vicat softening temperature (VST)
DANSK DS/CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fiber composites (NFC)) – Determination of particle size of lignocellosic material
AENOR UNE 61008:1975 REFRACTORY MATERIALS. TESTING OF REFRACTORY MATERIALS
DANSK DS/EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
AENOR UNE-EN 16245-3:2014 Fiber-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fiber
VDI 3469 BLATT 5-2007 Emission reduction — Production and processing of fibrous materials — High temperature wool
NS-EN 16245-3:2013 Fibre-reinforced plastic composites — Declaration of raw material characteristics — Part 3: Specific requirements for fibre

CZ-CSN

CSN 34 7010 Cast.69-1972 Low and high temperature endurance test of fibrous impregnated coveringa
CSN 34 7010 Cast.68-1972 Low and high temperature endurance test of fibrous impregnated coverings
CSN 72 5035-1979 Test of fired ceramic materials. Definition of íliG iesislance to temperature change
CSN 72 7302 Z1-1995 Insulating materials, test methods for inorganic fibers
CSN 72 7302-1987 Thermal insulation materials from inorganic fibres. Methods of testing
CSN 50 0240-1989 Forming handsheets of fibrous materials for optical tests
CSN 34 6501-1985 Tests of thermal endurance of electrical insulating materials

Korean Agency for Technology and Standards (KATS)

KS L 9102-2014(2019) Artificial mineral fiber thermal insulation materials
KS M 3083-2004 Testing method for chemical resistance of fiber reinforced plastics
KS L 9102-2014 Artificial mineral fiber thermal insulation materials
KS L 9102-2019 Artificial mineral fiber thermal insulation materials
KS M 3083-2014 Testing method for chemical resistance of fiber reinforced plastics
KS M 3083-1994 Testing method for chemical resistance of fiber reinforced plastics
KS M 3083-2004(2009) Testing method for chemical resistance of fiber reinforced plastics
KS F 2300-2002 Testing method for thermal resistance of glass wool heat insulating material
KS L 3506-1996 TESTING METHOD FOR REFRACTORINESS OF REFRACTORY RAW MATERIALS
KS M ISO 14125:2012 Fibre-reinforced plastic composites－Determination of flexural properties
KS K 0768-2015 Test method for bursting strength of geotextile
KS K 0769-2007 Test method for tearing strength of geotextile
KS K 0250-1985 Test method for nonfibrous materials in cotton: Enzyme method
KS K 0768-2012 Test method for bursting strength of geotextile
KS K 3103-2016 Test method of chemical resistance from ultrafiltration hollow fiber membrane
KS M ISO 306-2015(2020) Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)
KS K 0250-2019 Test method for nonfibrous materials in cotton: Enzyme method
KS M ISO 14125-2012(2022) Fibre-reinforced plastic composites－Determination of flexural properties
KS M ISO 14125-2022 Fibre-reinforced plastic composites－Determination of flexural properties
KS M ISO 306-2020 Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)
KS M ISO 14125-2012(2017) Fibre-reinforced plastic composites－Determination of flexural properties

KR-KS

KS L 9102-2014(2019)(英文版) Artificial mineral fiber thermal insulation materials

Association Francaise de Normalisation

NF EN 6037:2017 Aerospace series - Fiber reinforced plastics - Test method - Determination of resistance to matting
NF ISO 16349:2015 Refractory materials - Determination of abrasion resistance at elevated temperatures
NF B40-313*NF ISO 16349:2015 Refractory materials - Determination of abrasion resistance at elevated temperature
NF T30-013-1:2002 Paints and varnishes - Determination of resistance to filiform corrosion - Part 1 : steel substrates.
NF T57-120-3*NF EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3 : specific requirements for fibre
NF T25-501-3:2015 Reinforcement fibers - Flax fibers for plastic composites - Part 3: determination of the tensile properties of technical fibers
NF T25-501-2:2015 Fibres de renfort - Fibres de lin pour composites plastiques - Partie 2 : détermination des propriétés en traction des fibres élémentaires
NF T57-105*NF EN ISO 14125:1998 Fibre-reinforced plastic composites. Determination of flexural properties.
NF EN 15930:2010 Fibres - Élasticité des fibres - Méthodes d'essai
NF EN ISO 14125:1998 Fiber Reinforced Plastic Composites – Determination of Flexural Properties
NF EN ISO 306:2022 Plastics - Thermoplastic materials - Determination of the Vicat softening temperature (VST)
NF EN 6032:2016 Aerospace series - Fiber reinforced plastics - Test method - Determination of glass transition temperature
NF EN 16245-3:2013 Fiber-reinforced plastic composites - Declaration of raw material characteristics - Part 3: special requirements for fibers

German Institute for Standardization

DIN 52271:1981 Testing of mineral fibre insulating materials; Behaviour at elevated temperatures
DIN EN 1007-6:2008 Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature; English version of DIN EN 1007-6:2008-02
DIN EN 15930:2010-12 Fibres - Elasticity of fibres - Test methods; German version EN 15930:2010
DIN EN 1007-4:2004 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 4: Determination of tensile properties of filaments at ambient temperature; German version EN 1007-4:2004
DIN EN ISO 14125:2011-05 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor.1:2001 + Amd.1:2011); German version EN ISO 14125:1998 + AC:2002 + A1:2011
DIN CEN/TS 17158:2018-06*DIN SPEC 68158:2018-06 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material; German version CEN/TS 17158:2018
DIN 7742-2:1990 Cellulose ester (CA, CP, CAB) moulding materials; preparation of specimens and determination of their properties
DIN EN 16245-3:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre; German version EN 16245-3:2013

GSO

GSO ISO 16349:2015 Refractory materials -- Determination of abrasion resistance at elevated temperature
BH GSO ISO 16349:2017 Refractory materials -- Determination of abrasion resistance at elevated temperature
GSO ISO 10635:2014 Refractory products -- Methods of test for ceramic fibre products
OS GSO ASTM D2924:2009 Standard test method for external pressure resistance of "fiberglass" (glass-fiber-reinforced thermosetting-resin) pipe
GSO ISO 306:2015 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
GSO ISO 30021:2015 Plastics -- Burning behaviour -- Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
OS GSO ISO 30021:2015 Plastics -- Burning behaviour -- Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
BH GSO ISO 30021:2017 Plastics -- Burning behaviour -- Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
OS GSO ISO 306:2015 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
OS GSO ISO 14125:2015 Fibre-reinforced plastic composites -- Determination of flexural properties
GSO ISO 14125:2015 Fibre-reinforced plastic composites -- Determination of flexural properties
GSO ISO 4899:2013 Textile-glass-reinforced thermosetting plastics - Properties and test methods

International Organization for Standardization (ISO)

ISO 16349:2015 Refractory materials - Determination of abrasion resistance at elevated temperature
ISO 30021:2013 Plastics.Burning behaviour.Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
ISO 306:1994 Plastics - Thermoplastic materials - Determination of Vicat Softening Temperature (VST)
ISO 14125:1998 Fibre-reinforced plastic composites - Determination of flexural properties
ISO/DIS 8060:2023 Composites and reinforcements fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Characterization of durability of adhesive interfaces by wedge rupture test
ISO 3268:1978 Plastics; Glass reinforced materials; Determination of tensile properties
ISO 10466:2021 Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection
ISO 306:2022 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)

British Standards Institution (BSI)

BS ISO 30021:2013 Plastics. Burning behavior. Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
BS EN 1007-4:2005 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature
12/30234141 DC BS ISO 16349. Refractory materials. Determination of abrasion resistance at elevated temperature
BS EN 1007-6:2008 Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Determination of tensile properties of filaments at high temperature
BS 1902-6:1986(2009) Methods oftesting Refractory materials — Part 6 : Ceramic fibre products
BS EN 1007-6:2007 Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature
BS EN ISO 14125:1998 Fibre-reinforced plastic composites - Determination of flexural properties
BS 1902-6:1986 Methods of testing refractory materials - Ceramic fibre products
BS EN 16245-3:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for fibre
BS EN ISO 527-5:2021 Plastics. Determination of tensile properties. Test conditions for unidirectional fibre-reinforced plastic composites
BS EN ISO 14125:1998+A1:2011 Fibre-reinforced plastic composites. Determination of flexural properties
BS EN ISO 306:2022 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS EN ISO 306:2013 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS ISO 8060:2024 Composites and reinforcements fibres. Carbon fibre reinforced plastics (CFRPs) and metal assemblies. Characterization of durability of adhesive interfaces by wedge rupture test

PL-PKN

PN P04761-02-1992 Test methods for row materials Man-made fibres Determination of the length of staple fibres

Standard Association of Australia （SAA）

AS 4143.6:1996 Methods of test for fibre ropes - Resistance to abrasion
AS 1774.1:2000 Refractories and refractory materials - Physical test methods - Determination of cold compressive strength
AS 1774.28:2007 Refractories and refractory materials - Physical test methods - Ceramic fibre products - Test methods
AS 1145.5:2001 Determination of tensile properties of plastics materials - Test conditions for fibre-reinforced plastic composites

American Society for Testing and Materials (ASTM)

ASTM C1936-23 Standard Test Method for Corrosiveness of Mineral-Fiber or Cellulosic-Fiber Insulation by Comparison to Control
ASTM C704/C704M-15 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C704/C704M-14 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C704-01 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C892-89 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation
ASTM C704/C704M-15e1 Standard test method for abrasion resistance of refractory materials at room temperature
ASTM D7332/D7332M-07e1 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
ASTM C892-18a Standard Specification for High-Temperature Fiber Blanket Thermal Insulation
ASTM C892-19 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation
ASTM C704-99 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C892-18 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation
ASTM C704-01e1 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C704/C704M-15(2022) Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C704/C704M-15(2022)e1 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C704/C704M-09 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C704/C704M-12 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C704/C704M-09e1 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature

AT-ON

ONORM C 9441 Teil.3-1984 Testing of elastomers; staining of organic materials by vulcanized elastomers; Penetration stain: method C
ONORM C 9441 Teil.2-1984 Testing of elastomers; staining of organic materials by vulcanized elastomers; extraction stain: method B1, method B 2 and method B 3

IN-BIS

IS 9842-1994 Preformed fibrous pipe insulation - specification

RO-ASRO

STAS 6638-1987 Metals tcsting HIGH TEmpEratuResTEns1lE tEst of mEtaiLEc matEriat.s
STAS 6136-1990 Fibrous and cellulosic raw materials. Pentosans content determination

DIN

DIN EN 1447:1996 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure

IT-UNI

UNI 2902-1945 Textile material testing. Fiber length determination
UNI 5751-1966 Textile material testing. Determination of fiber length by measuring the length of individual fibers
UNI 5608-1965 Elastic materials: testing of vulcanized materials, determination of volume resistivity of elastic fibers and antistatic materials
UNI 2901-1945 Textile material testing. Fiber tensile test

VN-TCVN

TCVN 6530-11-2007 Refractories.Method of test.Part 11: Determination of abrasion resistance at room temperature

Japanese Industrial Standards Committee (JISC)

JIS A 9504:2011 Man made mineral fibre thermal insulation materials
JIS A 9504:2017 Man made mineral fibre thermal insulation materials
JIS A 9504:2004 Man made mineral fibre thermal insulation materials
JIS R 1673:2007 Test method for compressive behavior of continuous fiber-reinforced ceramic matrix composites at room temperature
JIS K 7206:1999 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
JIS K 7206:2016 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
JIS K 7017:1999 Fibre-reinforced plastics composites -- Determination of flexural properties
JIS R 1721:2015 Testing method for compressive behavior of continuous fiber-reinforced ceramic composites at elevated temperature
JIS K 7070:1999 Testing method for chemical resistance of fiber reinforced plastics
JIS R 1656:2003 Testing methods for tensile stress-strain behavior of continuous fiber reinforced ceramic matrix composites at room temperature

GM Daewoo

GMKOREA EDS-T-7605-2011 Test Method for Determining the Low Temperature Resistance of Automotive Trim Materials

BR-ABNT

ABNT MB-270-1962 Refractory materials. Linear temperature expansion detection

ZA-SANS

SANS 1381-1:2007 Materials for thermal insulation of buildings Part 1: Fibre thermal insulation mats
SANS 1381-6:1994 Materials for thermal insulation of buildings Part 6: Cellulose loose fill thermal insulation material
SANS 1833-6:2007 Textiles - Quantitative chemical analysis Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride)

API - American Petroleum Institute

API STD 976-2018 Refractory Installation Quality Control - Inspection and Testing of AES/RCF Fiber Linings and Materials (FIRST EDITION)

RU-GOST R

GOST 23.223-1997 Products wear resistance assurance. Method for determination of tribotechnical properties of construction materials in contact with fibrous material
GOST R 53483-2009 Modified flax raw fiber. Test methods
GOST 23.212-1982 Products wear resistanse assurance. The method of testing materials for wear under shock under law temperature conditions

European Committee for Standardization (CEN)

EN 1007-6:2007 Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature
PD CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material
EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre

ES-UNE

UNE-EN ISO 14125/AC:2002 Fibre-reinforced plastic composites - Determination of flexural properties. (ISO 14125:1998/Cor. 1:2001)
UNE-EN ISO 306:2023 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)

YU-JUS

JUS D.A8.080-1984 Testing of fibre building boards. Sampling and preparing test pieces

Danish Standards Foundation

DS/EN ISO 14125:1999 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125/Corr.1:2002 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
DS/EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre

VDI - Verein Deutscher Ingenieure

VDI 3469 BLATT 5-2015 Emission control - Production and processing of fibrous materials - High-temperature insulation wool
VDI 3469 Blatt 5-2006 Emission control - Production and processing of fibrous materials - High-temperature insulation wool

American National Standards Institute （ANSI)

ANSI/TIA-455-188-1991 Low-Temperature Testing of Fiber Optics Components

Indonesia Standards

SNI ISO 306:2011 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

AENOR

UNE-EN 16245-3:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre

GOSTR

GOST 34648-2020 Fiber-reinforced thermosetting plastic pipes and parts of pipelines. Determination of plastic pipes and fittings resistance to short-time internal hydraulic pressure

GM North America

GM GMP.S/MA.009-1989 S/MA - High Heat, 20% Glass Fiber Reinforced

Others: Test temperature resistance