Standard Curve Validation

Standard Curve Validation, Total:149 items.

The international standard classification for "Standard Curve Validation" includes: Noise with respect to human beings .

The Chinese standard classification for "Standard Curve Validation" includes: Acoustic Measurement .

国家能源局

NB/T 10587-2021 Verification code of power curve for wind turbine in wind farm

Group Standards of the People's Republic of China

T/DYFIA 003-2023 Geographical indication certification trademark- Dongyang Hongqu jiu
T/CECS 1068-2022 Reliability Appraisal Standards for Hyperbolic Cooling Towers
T/SHZSAQS 00084-2022 Formaldehyde standard curve preparation technical regulations
T/CEEMA 002-2020 Technical specification for wind turbine power curve verification
T/HNCAA 027-2021 Verification of inspection and testing standard methods
T/CTNX 004-2021 Geographical indication certification trademark Changtaibanli red yeast rice wine

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 9226-1988 Certificate of Inspection for Standard Radioactive Sources
GB/T 4909.5-1985 Test methods for bare wires--Bend test--Reverse bend test
GB/T 4963-2007 Acoustics—Normal equal-loudness-level contours
GB/T 4909.6-1985 Test methods for bare wires--Bend test--Single bend test

Taiwan Provincial Standard of the People's Republic of China

CNS 3157-1981 Accuracy Test Standard for Crank Press

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 2089.1-2024 IEEE Standard for Online Age Verification
IEEE P2089.1/D2.1, February 2024 IEEE Draft Standard for Online Age Verification
IEEE P2089.1 IEEE Draft Standard for Online Age Verification
IEEE P2089.1/D1.0, September 2023 IEEE Draft Standard for Online Age Verification
IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions
IEEE P1012/D18, January 2016 IEEE Approved Draft Standard for System, Software and Hardware Verification and Validation
IEEE Std 1647-2019 IEEE Standard for the Functional Verification Language e
IEEE 1647-2016 IEEE Standard for the Functional Verification Language e
IEEE 1647-2019 IEEE Standard for the Functional Verification Language e

American Society for Testing and Materials (ASTM)

ASTM E561-19e1 Standard Test Method for K R Curve Determination
ASTM E561-21 Standard Test Method for K R Curve Determination
ASTM E561-20 Standard Test Method for K R Curve Determination
ASTM E561-19 Standard Test Method for K R Curve Determination
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM E561-08e1 Standard Test Method for K-R Curve Determination
ASTM E561-22 Standard Test Method for K R Curve Determination
ASTM E561-05 Standard Test Method for K-R Curve Determination
ASTM E561-05e1 Standard Test Method for K-R Curve Determination
ASTM E561-10e2 Standard Test Method for K-R Curve Determination
ASTM E561-15a Standard Test Method for K R Curve Determination
ASTM F2508-16e1 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
ASTM F2508-15 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
ASTM F2508-12 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
ASTM D1336-07(2011) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM E561-10 Standard Test Method for K-R Curve Determination
ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D1336-07(2015) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D1336-97 Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D1336-97(2003) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D2493/D2493M-09 Standard Viscosity-Temperature Chart for Asphalts
ASTM E2948-14 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM D3883-04 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM E561-23 Standard Test Method for K R Curve Determination
ASTM D6068-10(2018) Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM E561-98 Standard Practice for R-Curve Determination
ASTM E561-15 Standard Test Method for K R Curve Determination
ASTM E561-08 Standard Test Method for K-R Curve Determination
ASTM F534-02 Standard Test Method for Bow of Silicon Wafers
ASTM F1832-07 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM E915-19 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM D3883-04(2008) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM D2136-02(2012) Standard Test Method for Coated Fabricsmdash;Low-Temperature Bend Test
ASTM D3883-04(2012) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM D3883-99 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM F1832-07(2011) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D3043-00 Standard Test Methods for Testing Structural Panels in Flexure
ASTM D4882-97 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM D4882-17 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM C485-83(2003)e1 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM F534-97 Standard Test Method for Bow of Silicon Wafers
ASTM C485-83(2003) Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM F415-87(2005) Standard Test Method for Curl in Carbon Paper
ASTM F3141-23 Standard Guide for Total Knee Replacement Loading Profiles
ASTM C1699-09(2015) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM C485-83(1999) Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM E4-24 Standard Practices for Force Calibration and Verification of Testing Machines
ASTM D3813/D3813M-98(2003) Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
ASTM D3813/D3813M-98 Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
ASTM F2771-10(2016) Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM E2846-20 Standard Guide for Thermocouple Verification
ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E3291-21 Standard Guide for Reliability Demonstration Testing
ASTM F415-87(2010) Standard Test Method for Curl in Carbon Paper
ASTM E4-79 Standard Methods of Load Verification Of Testing Machines
ASTM F415-87(2000)e1 Standard Test Method for Curl in Carbon Paper
ASTM C485-24 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM F1851-98 Standard Practice for Bar Code Verification
ASTM C485-16 Standard Test Method for Measuring Warpage of Ceramic Tile

SCC

IEEE 2089.1-2024 IEEE Standard for Online Age Verification
AASHTO T 272-2004 Standard Method of Test for Family of Curves---One-Point Method
AASHTO R 75-2016(2020) Standard Practice for Developing a Family of Curves
ULC-S537-1996 Standard for the Verification of Fire Alarm Systems
CAN/ULC S537-1997 Standard for the Verification of Fire Alarm Systems
CAN/ULC-S537-M86-1986 Standard for the Verification of Fire Alarm Systems
CAN/ULC-S537-2013(C2018) Standard on the verification of fire alarm networks

GSO

GSO ASTM F1874:2021 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
BH GSO ASTM F1874:2022 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
GSO ISO 21233:2024 Heavy commercial vehicles and buses — Vehicle dynamics simulation and validation — Closing-curve test
BH GSO ASTM F3141:2023 Standard Guide for Total Knee Replacement Loading Profiles
GSO ASTM F3141:2023 Standard Guide for Total Knee Replacement Loading Profiles

German Institute for Standardization

DIN ISO 226 E:2001-11 Acoustics - Normal equal-loudness-level contours
DIN ISO 226:2006 Acoustics - Normal equal-loudness-level contours (ISO 226:2003);English version of DIN ISO 226:2006-04

RU-GOST R

GOST 9735-1987 Profile grinders. Standards of accuracy

International Organization for Standardization (ISO)

ISO 226:2023 Acoustics — Normal equal-loudness-level contours
ISO 226:1987 Acoustics; Normal equal-loudness level contours
ISO 22183:2023 Plastics — Validation of force-time curves obtained from high-speed tensile tests
ISO 226:2003 Acoustics - Normal equal-loudness-level contours
ISO 21233:2021 Heavy commercial vehicles and buses - Vehicle dynamics simulation and validation - Closing-curve test

British Standards Institution (BSI)

BS ISO 226:2003 Acoustics - Normal equal-loudness-level contours
BS ISO 22183:2023 Plastics. Validation of force-time curves obtained from high-speed tensile tests
22/30427884 DC BS ISO 22183. Plastics. Validation of force-time curve of tensile testing at high speed
BS ISO 21233:2021 Heavy commercial vehicles and buses. Vehicle dynamics simulation and validation. Closing-curve test

Association Francaise de Normalisation

NF S30-003*NF ISO 226:2004 Acoustics - Normal equal-loudness-level contours
NF V03-110:2010 Analysis of agricultural and food products - Characterization protocol for the validation of a quantitative analysis method by construction of the accuracy profile

Korean Agency for Technology and Standards (KATS)

KS I ISO 226:2014 Acoustics — Normal equal-loudness level contours
KS I ISO 226:2003 Acoustics-Normal equal-loudness level contours

The American Road & Transportation Builders Association

AASHTO R 75-2016(R2020) Standard Practice for Developing a Family of Curves
AASHTO T 272-1986 Standard Method of Test for Family of Curves - One-Point Method HM-22; PART IIB R(2000)
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method

AASHTO - American Association of State Highway and Transportation Officials

T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 67-2005 Standard Method of Test for Standard Practices for Force Verification of Testing Machines
T 67-2008 Standard Method of Test for Standard Practices for Force Verification of Testing Machines
T 67-1985 Standard Method of Test for Standard Practices for Load Verification of Testing Machines
T285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement

SE-SIS

SIS SMS 2027-1975 Dust separating. Standard curves for dust
Nr 39-1992 Curve electronics according to Swedish standards

Society of Automotive Engineers (SAE)

SAE J739-1991 Cutting Edge - Curved Grader, Standard June 1991

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE SF-98-17-5-1998 Verification Test of ASHRAE Standard 152P
ASHRAE MN-00-12-1-2000 Field Validation of Standard 152P (RP-1056)

South African Bureau of Standard

SANS 5515:2007 Flexing test on flexible cords

IETF - Internet Engineering Task Force

RFC 4754-2007 IKE and IKEv2 Authentication Using the Elliptic Curve Digital Signature Algorithm (ECDSA)

IT-UNI

UNI S 195-1943 Insulation material standards. Numerical charts and graphs

American National Standards Institute （ANSI)

ANSI/IEEE C37.112:1996 Standard Inverse-Time Characteristic for Overcurrent Relays
ANSI/IEEE 1012:2004 Standard for Software Verification and Validation
ASTM D6027/D6027M-24 Standard Practice for Calibration/Verification of Linear Displacement Transducers for Geotechnical Purposes (Standard + Redline PDF Bundle)

US-GSFC

GSFC-STD-7000 REV A-2013 GENERAL ENVIRONMENTAL VERIFICATION STANDARD (GEVS)

Standard Association of Australia （SAA）

AS A106:1957 Australian standard method for the determination of the flexural strength of flexure test specimens
AS 1469:1973 Criteria curves for rating noise and establishing acoustic environment

Danish Standards Foundation

DS/EN 45002:1991 General criteria for the assessment of testing laboratories

American Welding Society (AWS)

AWS QC1-1996 Standard for AWS Certification of Welding Inspectors