Biochemical instrument standard curve method comparison method

Biochemical instrument standard curve method comparison method, Total:349 items.

The international standard classification for "Biochemical instrument standard curve method comparison method" includes: Ambient atmospheres , Cosmetics. Toiletries , Protection against crime , Surface treatment and coating , Exploratory and extraction equipment .

The Chinese standard classification for "Biochemical instrument standard curve method comparison method" includes: Environmental sanitation , Crime judging technology , Material Protection , Petroleum drilling & production equipment and instrument , Mechanics Measurement .

Military Standard of the People's Republic of China-General Armament Department

GJB 1708-1993 Automatic network analyzer comparison method
GJB 6296-2008 Calibration methods for tropospherie wind profiler

Group Standards of the People's Republic of China

T/CECS 1127-2022 Public building energy consumption comparative evaluation method standard
T/ZS 0016-2018 Public Health Pilot Standardization Management Measures
T/CSES 43-2021 Technical specifications for online monitoring equipment of Biochemical Oxygen Demand based on in situ biofilm
T/HGJ 12400-2021 Design standard for instrumentation cables selection in petrochemical industry
T/GDAQI 84-2022 Methodological comparison and evaluation of the accuracy of in vitro diagnostic reagents

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 7917.4-1987 Standard Method of Hygienic Test for Cosmetics - Methanol
GB/T 7917.4-1987 Standard methods of Hygienic test for cosmetics--Methanol
GB/T 11732-1989 standard method for examination of pyridine in air of residential areas-Cyanogen chloride-barbituric acid spectrophotometric method
GB 7917.3-1987 Standard methods for hygienic test for cosmetics; Lead
GB 7917.1-1987 Standard methods of hygienic test for cosmetics; Mercury
GB/T 7917.2-1987 Standard methods of hygienic test for cosmetics--Arsenic
GB/T 17098-1997 Standard method for hygienic examination of phenols in air of residential areas - 4 - Aminoantipyrine spectrophotometric method
GB/T 7917.3-1987 Standard methods for hygienic test for cosmetics--Lead
GB 7917.2-1987 Standard methods of hygienic test for cosmetics; Arsenic

Professional Standard - Aerospace

QJ 2455-1993 PO7B/SS3501 frequency standard comparison system test method

中华人民共和国国家卫生和计划生育委员会

GB 11732-1989 Standard method for hygienic examination of pyridine in the atmosphere of residential areas cyanogen chloride-barbituric acid spectrophotometric method
GB/T 7917.1-1987 Standard methods of hygienic test for cosmetics--Mercury

Professional Standard - Public Safety Standards

GA/T 1695-2019 Forensic Science Seal Inspection Part 6: Line-Drawing Comparison Method
GA/T 1690.6-2019 Forensic sciences—Examination methods for seal stamps—Part 6:Drawing lines and comparison

Professional Standard - Electron

SJ/Z 1171-1977 Methods for determination of polarization curve of electroplating solution

Taiwan Provincial Standard of the People's Republic of China

CNS 11521-1986 Method for Making Anode Polarization Measurement for Stainless Steels

Professional Standard - Machinery

JB/T 7704.6-1995 Test Method for Electroplating Solution - Determination of Polarization Curve

Professional Standard - Petroleum

SY 6532-2002 Calibration method of induced polarimeter
SY/T 6532-2002 The calibration method for induced polarization instrument

未注明发布机构

ASTM RR-D08-1017 2014 D0036/D0036M-Standard Test Method for Softening Point of Bitumen (Ring and Ball Apparatus)

National Metrological Verification Regulations of the People's Republic of China

JJG 298-2005 Verification Regulation of Standard Vibrator in Middle Frequency Band (Comparison Method)

AASHTO - American Association of State Highway and Transportation Officials

T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
T 272-1986 Standard Method of Test for Family of Curves - One-Point Method (HM-22; PART IIB)
T 227-2002 Standard Method of Test for Density@ Relative Density (Specific Gravity)@ or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
TP 122-2016 Standard Method of Test for Determination of Performance Grade of Physically Aged Asphalt Binder Using Extended Bending Beam Rheometer (BBR) Method
TP 125-2016 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
TP1-1998 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2005 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2009 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1997 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2008 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2012 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2003 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2004 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2006 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 295-2013 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
T 295-2007 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
T 295-2008 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
TP 107-2018 Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test
TP1-1993 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) (Edition 1B)
T 53-2008 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
T 53-2006 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
T 53-1992 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)

American Society for Testing and Materials (ASTM)

ASTM D1052-09(2019) Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
ASTM F1763-96 Standard Test Methods for Measuring Contrast of a Linear Polarizer
ASTM G10-10(2019) Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM G10-10 Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM G10-10(2024) Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM G10-83(1996)e1 Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM E561-21 Standard Test Method for K R Curve Determination
ASTM E561-20 Standard Test Method for K R Curve Determination
ASTM E561-19e1 Standard Test Method for K R Curve Determination
ASTM D3414-98 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
ASTM E561-19 Standard Test Method for K R Curve Determination
ASTM E561-22 Standard Test Method for K R Curve Determination
ASTM D3414-98(2004) Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
ASTM E1647-03 Standard Practice for Determining Contrast Sensitivity in Radioscopy
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM E561-08e1 Standard Test Method for K-R Curve Determination
ASTM D7126-10 Standard Test Method for On-Line Colorimetric Measurement of Silica
ASTM D7126-15 Standard Test Method for On-Line Colorimetric Measurement of Silica
ASTM D7126-15(2023) Standard Test Method for On-Line Colorimetric Measurement of Silica
ASTM E561-05 Standard Test Method for K-R Curve Determination
ASTM D4338-97(2011)e1 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM E561-10e2 Standard Test Method for K-R Curve Determination
ASTM E561-05e1 Standard Test Method for K-R Curve Determination
ASTM E561-15a Standard Test Method for K R Curve Determination
ASTM E2926-13 Standard Test Method for Forensic Comparison of Glass Using Micro X-ray Fluorescence lpar;micro;-XRFrpar; Spectrometry
ASTM E1422-05 Standard Guide for Test Methods for Forensic Writing Ink Comparison
ASTM D1336-07(2011) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM C1428-18(2023) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single–Standard Gas Source Multiple Collector Mass Spectrometer Method
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D1217-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E561-10 Standard Test Method for K-R Curve Determination
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM D747-99 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM C604-02(2012) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
ASTM D1217-93(2007) Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D5002-18 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D2320-98(2022)e1 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D1217-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D2320-98(2017) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D2320-98(2008) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D5002-18e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D1336-07(2015) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D7528-21 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
ASTM D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D36/D36M-14e1 Standard Test Method for Softening Point of Bitumen &40;Ring-and-Ball Apparatus&41;
ASTM D5002-19 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D2320-98(2012) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D1052-85(1999)e1 Standard Test Method for Measuring Rubber Deterioration-Cut Growth Using Ross Flexing Apparatus
ASTM D752-73(1978) Standard test method for bench oxidation of engine oils using ROBO instruments
ASTM D1217-20 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D7528-17a Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
ASTM D7528-17 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D1217-93(1998) Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D3414-98(2011)e1 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
ASTM D7528-22 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
ASTM D36/D36M-14 Standard Test Method for Softening Point of Bitumen 40;Ring-and-Ball Apparatus41;
ASTM A977/A977M-07(2013) Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM A977/A977M-07 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D1336-97(2003) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D1336-97 Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
ASTM C1428-18 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single–Standard Gas Source Multiple Collector Mass Spectrometer Method
ASTM D1480-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D3412/D3412M-13(2020) Standard Test Method for Coefficient of Friction, Yarn to Yarn
ASTM D4567-19 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM C329-88(2006) Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
ASTM C329-88(2016) Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
ASTM D7172-06e1 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
ASTM D891-09 Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
ASTM C127-15 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
ASTM D6642-01 Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux
ASTM F1833-97 Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
ASTM C128-15 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
ASTM D3412-01 Standard Test Method for Coefficient of Friction, Yarn to Yarn
ASTM A977-97 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D891-95(2004) Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
ASTM C329-88(2011) Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
ASTM F1833-97(2006) Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
ASTM F1833-97(2011) Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
ASTM C128-22 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
ASTM D3720-90(1999) Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
ASTM D6642-01(2006) Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux
ASTM E1066/E1066M-12 Standard Practice for Ammonia Colorimetric LeakTesting
ASTM D3883-04 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM D891-95(2000) Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
ASTM D3412-95 Standard Test Method for Coefficient of Friction, Yarn to Yarn
ASTM E3002-15 Standard Practice for Assessing the Comparative Efficacy of Products Used for the Decontamination of Chemical Warfare Agents (CWAs) on Skin
ASTM C729-11(2022) Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM A773/A773M-96 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM D1298-99e1 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM C127-24 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
ASTM D3720-90(2019) Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
ASTM E2926-17 Standard Test Method for Forensic Comparison of Glass Using Micro X-ray Fluorescence (µ-XRF) Spectrometry
ASTM D1480-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D3720-90(2011) Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
ASTM F534-02 Standard Test Method for Bow of Silicon Wafers
ASTM A773/A773M-14 Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
ASTM D5866-05 Standard Test Method for Neps in Cotton Fibers (AFIS-N Instrument)
ASTM D1480-21 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM A773/A773M-01 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM D3663-03(2008) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM E561-23 Standard Test Method for K R Curve Determination
ASTM D36-06 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
ASTM A773/A773M-21 Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D5866-12 Standard Test Method for Neps in Cotton Fibers
ASTM D7298-06(2017) Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
ASTM D6318-98 Standard Practice for Calibrating a Fathometer Using a Bar Check Method
ASTM D2821-00(2005) Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
ASTM D2821-00 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
ASTM E816-05(2010) Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
ASTM D4578-06(2021) Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction
ASTM D6068-10(2018) Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM C1495-16 Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
ASTM D7249/D7249M-16e1 Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
ASTM D2821-09 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
ASTM D2821-00(2005)e1 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
ASTM D2821-19 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
ASTM C1344-03(2008) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
ASTM D7196-23 Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
ASTM D2745-00(2008) Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
ASTM D891-18 Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
ASTM D1810-94 Standard Test Method for Specific Gravity of Askarels
ASTM C1495-16(2023) Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
ASTM E2948-14 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM D6200-01(2017) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM E2113-02 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM D1480-02 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM C128-07a Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
ASTM E1891-21 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM D6068-96 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D1480-02e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1480-07 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM F1832-07 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM A773/A773M-01(2009) Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM E662-12a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E28-67 Standard Method Of Test For Softening Point By Ring-And-Ball Apparatus
ASTM E662-13b Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D1298-12b(2017)e1 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM C128-07 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
ASTM C128-12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
ASTM C1344-97(2013) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
ASTM C598-93(2013) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2003) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM D2885-13 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D7298-06(2011)e1 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
ASTM E662-13 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-12 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM C127-12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
ASTM D6034-96(2010)e1 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
ASTM F415-87(2005) Standard Test Method for Curl in Carbon Paper
ASTM D2320-98 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)

The American Road & Transportation Builders Association

AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-1986 Standard Method of Test for Family of Curves - One-Point Method HM-22; PART IIB R(2000)
AASHTO T 313-2019 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO T 313-2022 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO T 53-2009(R2018) Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
AASHTO T 295-2013 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
AASHTO TP 125-2016(R2020) Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
AASHTO T 53-2008 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
AASHTO T 53-2011 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
AASHTO T 295-2013(R2017) Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method

SCC

AASHTO T 272-2004 Standard Method of Test for Family of Curves---One-Point Method
CEI 45-35:1997 Standardized test methods of semiconductor X-ray spectrometers
BS PD ISO/TS 20460:2015 Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges
BS ISO 11664-1:2007 Colorimetry. CIE standard colorimetric observers
BS EN ISO /CIE 11664-1:2019 Colorimetry-CIE standard colorimetric observers
NS 4710:1971 Aluminium oxide primarily used for the production of aluminium — Determination of absolute density — Pyknometer method
DANSK DS/CEN ISO/TR 17844:2004 Welding - Comparison of standardised methods for the avoidance of cold cracks
BS EN ISO /CIE 11664-2:2022 Colorimetry-CIE standard illuminants
SN-CEN/TR 15106:2005 Fertilizers — Determination of chelating agents EDDHA and EDDHMA by ion pair chromatography — Comparison of non-standardized Lucena method with EN 13368-2:2001
DANSK DS/EN 16101:2012 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
AASHTO TP 122-2016(2020) Standard Method of Test for Determination of Performance Grade of Physically Aged Asphalt Binder Using Extended Bending Beam Rheometer (BBR) Method
AASHTO TP 125-2022(2023) Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
DIN 58940-2 Supplement 1:1978 Methods for the determination of susceptibility of pathogenic bacteria (without mycobacteria) to chemotherapeutic agents of discs for agar diffusion test example for getting the standard curve
AASHTO TP 122-2022 Standard Method of Test for Determination of Performance Grade of Physically Aged Asphalt Binder Using Extended Bending Beam Rheometer (BBR) Method
AENOR UNE-EN 16101:2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
AASHTO T 313-2012(2016) Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
NS-EN 16101:2012 Water quality — Guidance standard on interlaboratory comparison studies for ecological assessment
AENOR UNE-CEN/TR 15106 IN:2005 Fertilizers - Determination of chelating agents EDDHA and EDDHMA by ion pair chromatography - Comparison of non-standardized Lucena method with EN 13368-2:2001
DANSK DS/CEN/TR 15106:2005 Fertilizers - Determination of chelating agents EDDHA and EDDHMA by ion pair chromatography - Comparison of non-standardized Lucena method with EN 13368-2:2001
AASHTO T 313-2009 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
DIN 5033-9 E:2017 Draft Document - Colorimetry - Part 9: Reflectance standard for calibration in colorimetry and photometry
AASHTO TP 125-2016(2020) Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
AASHTO T 313-2006 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AWWA WQTC71340 Comparison of On-line Chlorine Analysis Methods and Instrumentation Built on Amperometric and Colorimetric Technologies
AS K41.601.2:1970 Standard Methods of Test for Paints, Varnishes, Lacquers and Related, Method 601.2: Colour - Instrumental measurement of colour difference using the 'Colormaster' differential colorimeter
DANSK DS/ISO/CIE 11664-1:2019 Colorimetry – Part 1: CIE standard colorimetric observers
AWWA QTC97035 Optimizing Trials for Comparing Methods for Parasite Recovery
DANSK DS/EN ISO 11664-1:2011 Colorimetry – Part 1: CIE standard colorimetric observers
DIN 5033-10 E:2021 Draft Document - Colorimetry - Part 10: Reflectance black standard for calibration in colorimetry and photometry
ASTM D287-1992 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)

CN-STDBOOK

图书 3-8772 A Comparative Interpretation of the New "Standardization Law"
图书 3-9239 Comparative Analysis of Food Additives Regulations and Standards at Home and Abroad

GSO

GSO IEC 61094-5:2014 Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
GSO ISO 901:2013 Aluminium oxide primarily used for the production of aluminium -- Determination of absolute density -- Pyknometer method
OS GSO ISO 901:2013 Aluminium oxide primarily used for the production of aluminium -- Determination of absolute density -- Pyknometer method
GSO ASTM F1874:2021 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
BH GSO ASTM F1874:2022 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
GSO ISO/IEC TR 30117:2017 Information technology -- Guide to on-card biometric comparison standards and applications
BH GSO ISO 11664-1:2022 Colorimetry — Part 1: CIE standard colorimetric observers
GSO ISO 11664-1:2021 Colorimetry — Part 1: CIE standard colorimetric observers
GSO ASTM D1298:2023 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
BH GSO ASTM D1298:2023 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

Association Francaise de Normalisation

NF EN ISO 14556:2023 Metallic materials - Impact bending test on Charpy V-notch specimen - Instrumented test method
NF T20-220:1973 Aluminium oxide primarily used for the production of aluminium. Determination of absolute density. Pyknometer method.
NF EN ISO/CIE 11664-2:2022 Colorimétrie - Partie 2 : illuminants CIE normalisés
FD A89-271*FD CEN ISO/TR 17844:2005 Welding - Comparison of standardised methods for the avoidance of cold cracks
FD CEN ISO/TR 17844:2005 Welding - Comparison of standardized methods to avoid cold cracks
NF E11-062:1985 Electronic comparators. Linear dimensional sensors. Test methods.
NF T36-007-1*NF EN ISO/CIE 11664-1:2019 Colorimetry - Part 1 : CIE standard colorimetric observers

RO-ASRO

STAS R 8158-1989 STANDARD CAST IRONS Grandes correspondance
STAS 3727-1972 STANDARD SOLUTIONS FOR COLORIMETRIC, TURBIDIME- TRIC AND NEPHELOMETRIG ANALYSIS
STAS 10000/8-1991 Principles and methodology of standardization. Adoption of International Standards in na?ional standards

German Institute for Standardization

DIN 5033-2:1992 Colorimetry; standard colorimetric systems
DIN 5033-9:2018-04 Colorimetry - Part 9: Reflectance standard for calibration in colorimetry and photometry
DIN-Fachbericht CEN ISO/TR 17844:2004 Welding - Comparison of standardised methods for the avoidance of cold cracks (ISO/TR 17844:2004); German translation of CEN ISO/TR 17844:2004
DIN 5033-9:2024-02 Colorimetry - Part 9: Reflectance standard for calibration in colorimetry and photometry / Note: Date of issue 2024-01-05*Intended as replacement for DIN 5033-9 (2018-04).
DIN 55912-2 Bb.2:1999 Pigments - Titanium dioxide pigments - Methods of analysis; establishing a calibration graph using the X-ray fluorescence analysis
DIN 28418-1:1976 Vacuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vacuum gauge
DIN EN ISO/CIE 11664-1:2020-03 Colorimetry - Part 1: CIE standard colorimetric observers (ISO/CIE 11664-1:2019); German version EN ISO/CIE 11664-1:2019
DIN 28418-2:1978 Vakuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vaccum gauge, ionization vacuum gauge

Korean Agency for Technology and Standards (KATS)

KS F 2320-2020 Standard test method for the California Bearing Ratio of soils
KS M ISO 901:2003 Aluminium oxide primarily used for the production of aluminium－Determination of absolute density－Pyknometer method
KS M ISO 901-2003(2018) Aluminum oxide for aluminum production - True density measurement - Pycnometric method
KS F 2390-2014 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS M ISO 901-2023 Aluminium oxide primarily used for the production of aluminium — Determination of absolute density — Pyknometer method
KS F 2390-2019 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS C 0074-1985(2020) Standard illuminants and sources for colorimetry

KR-KS

KS M 6721-2018(2023) Testing method of cut growth using ross flexing apparatus

TR-TSE

TS 922-1971 ALUMINIUM OXIDE PRIMARILY USED FOP THE PRODL'CTION OF ALUMINIUM DETERMINATION OF ABSOLUTE DENSITY PYKNOMETER METHOD

British Standards Institution (BSI)

PD ISO/TS 20460:2015 Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges
BS PD CEN ISO/TR 17844:2004 Welding — Comparison of standardised methods for the avoidance of cold cracks
BS EN ISO/CIE 11664-1:2019 Colorimetry. CIE standard colorimetric observers
BS EN ISO/CIE 11664-2:2022 Colorimetry. CIE standard illuminants
PD CEN ISO/TR 17844:2004 Welding. Comparison of standardised methods for the avoidance of cold cracks
BS EN ISO 11664-2:2011 Colorimetry. CIE standard illuminants
BS ISO 10526:2007 CIE standard illuminants for colorimetry
BS ISO 10526:2008 CIE standard illuminants for colorimetry

International Telecommunication Union (ITU)

ITU-R P.1148-1 FRENCH-1997 STANDARDIZED PROCEDURE FOR COMPARING PREDICTED AND OBSERVED HF SKY-WAVE SIGNAL INTENSITIES AND THE PRESENTATION OF SUCH COMPARISONS
ITU-R P.1148-1-1997 Standardized Procedure for Comparing Predicted and Observed HF Sky-Wave Signal Intensities and the Presentation of Such Comparisons
ITU-R P.1148-1 SPANISH-1997 STANDARDIZED PROCEDURE FOR COMPARING PREDICTED AND OBSERVED HF SKY-WAVE SIGNAL INTENSITIES AND THE PRESENTATION OF SUCH COMPARISONS

International Organization for Standardization (ISO)

ISO 901:1976 Aluminium oxide primarily used for the production of aluminium; Determination of absolute density; Pyknometer method
ISO/TR 17844:2004 Welding - Comparison of standardised methods for the avoidance of cold cracks
ISO/CIE 10526:1999 CIE standard illuminants for colorimetry
ISO/TS 20460:2015 Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges
ISO 10526:2007 CIE standard illuminants for colorimetry
ISO 11664-1:2007 Colorimetry - Part 1: CIE standard colorimetric observers
ISO/CIE 11664-1:2019 | EN ISO/CIE 11664-1:2019 Colorimetry — Part 1: CIE standard colorimetric observers
ISO/CIE 11664-1:2019 Colorimetry — Part 1: CIE standard colorimetric observers

YU-JUS

JUS H.B8.602-1979 Aiuminium axi?e primarilv used for tke pro?uciion of alummium, Determimtion of abx>hite density Pyknometer method

DIN

DIN 5033-9:2024 Colorimetry - Part 9: Reflectance standard for calibration in colorimetry and photometry
DIN 5033-10:2022 Colorimetry - Part 10: Reflectance black standard for calibration in colorimetry and photometry

European Committee for Standardization (CEN)

EN ISO 11664-1:2011 Colorimetry - Part 1: CIE standard colorimetric observers
EN ISO/TR 17844:2004 Welding - Comparison of standardised methods for the avoidance of cold cracks
CEN/TR 15106:2005 Fertilizers - Determination of chelating agents EDDHA and EDDHMA by ion pair chromatography - Comparison of non-standardized Lucena method with EN 13368-2:2001
EN 13523-3:2021 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
EN 13523-3:2001 Coil Coated Metals - Test Methods - Part 3: Colour Difference - Instrumental Comparison

ES-UNE

UNE-CEN ISO/TR 17844:2007 IN Welding - Comparison of standardised methods for the avoidance of cold cracks (ISO/TR 17844:2004)
UNE 41250-4:2016 Test methods for measurement of pavement deflection. Part 4: Curviameter
UNE-EN ISO/CIE 11664-1:2020 Colorimetry - Part 1: CIE standard colorimetric observers (ISO/CIE 11664-1:2019)

CU-NC

NC 41-46-1987 Leather. Determination of Starching Flexural Strength by Means of Bally Flexometer Testing Method

Danish Standards Foundation

DS/CEN ISO/TR 17844:2004 Welding - Comparison of standardised methods for the avoidance of cold cracks
DS/EN 16101:2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
DS/CEN/TR 15106:2006 Fertilizers - Determination of chelating agents EDDHA and EDDHMA by ion pair chromatography - Comparison of non-standardized Lucena method with EN 13368-2:2001
DS/EN ISO 11664-1:2011 Colorimetry - Part 1: CIE standard colorimetric observers

VE-FONDONORMA

COVENIN 1012-1976 Venezuelan National Standard Test Method for Shrinkage Percentage in Uninterrupted Spinning Yarns

Lithuanian Standards Office

LST EN 16101-2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment

International Electrotechnical Commission (IEC)

IEC 61094-5:2001 Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison

CZ-CSN

CSN 38 5553-1988 Checking of calibration gas mixture proportion by a comparative method

AENOR

UNE-EN 16101:2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
UNE-CEN/TR 15106:2005 IN Fertilizers - Determination of chelating agents EDDHA and EDDHMA by ion pair chromatography - Comparison of non-standardized Lucena method with EN 13368-2:2001

National Association of Corrosion Engineers (NACE)

NACE RP0197-1997 Standard Format for Computerized Electrochemical Polarization Curve Data Files

TH-TISI

TIS 1216-1994 Standard test method for softening point of bituminous meterials (ring-and-ball apparatus)

Japanese Industrial Standards Committee (JISC)

JIS G 0579:2007 Method of anodic polarization curves measurement for stainless steels

U.S. Military Regulations and Norms

ARMY MIL-STD-1170 VALID NOTICE 2-2009 Visual Standards and Comparison Methods for Evaluating Grain Configuration in 7.62 MM Cartridge Cases

American National Standards Institute （ANSI)

ANSI/ASTM E1362:1999 Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells

Others: