Polyethylene material is chemical resistant

Polyethylene material is chemical resistant, Total:486 items.

The international standard classification for "Polyethylene material is chemical resistant" includes: Films and sheets , Plastics pipes , Ceilings. Floors. Stairs , Rubber and plastics products , Plastics pipes, fittings and valves , Thermoplastic materials , Integrated Services Digital Network(ISDN) , Equipment for the chemical industry , Paints and varnishes , Rubber and plastics products in general , Other rubber and plastics products , Plastics in general , Binders. Sealing materials .

The Chinese standard classification for "Polyethylene material is chemical resistant" includes: Plastic profile , Roof and pavement waterproof and barrier material , Stomatologic device, equipment and material , Constructional plastics product , Synthetic resin and plastic , Basic standards and general methods for synthetic resin and plastic , Non-metal chemical machinery equipment , Coating , Packaging material and container , Daily use plastic products , Building construction and decoration engineering .

未注明发布机构

DIN EN ISO 15527 E:2018-08 Requirements and test methods for plastic polyethylene (ultra-high molecular weight polyethylene PE-UHMW, high-density polyethylene PE-HD) molded thin sheets (draft)
DIN EN ISO 6259-2 E:2019-09 Determination of tensile properties of thermoplastic pipes Part 2: Unplasticized polyvinyl chloride (PVC-U), oriented unplasticized polyvinyl chloride (PVC-O), chlorinated polyvinyl chloride (PVC-C) and high strength Pipes made of polyvinyl chloride (PVC-
NF P24-504*NF EN 513:2018 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to artificial weathering
DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)
DIN EN ISO 15527 E:2012-09 Requirements and test methods for plastic polyethylene (ultra-high molecular weight polyethylene PE-UHMW, high-density polyethylene PE-HD) molded thin sheets (draft)
JIS K 6745:2023 Plastics -- Unplasticized poly (vinyl chloride) sheets
ASTM RR-F17-1011 1980 D2737-Standard Specification for Polyethylene (PE) Plastic Tubing
DIN EN 513 E:2017-12 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17643-2011 Geosynthetics—Polyethylene geomembrane
GB/T 17688-1999 Geosynthetics - Polyvinyl chloride geomembrane
GB/T 11982.2-2015 Polyvinyl chloride floor coverings―Part 2:Homogeneous polyvinyl chloride floor covering
GB 12953-1991 Chlorinated polyethylene plastic sheets for waterproofing
GB/T 33094-2016 Plastics一Antistatic impact-resistant polystyrene compound
GB/T 11982.1-1989 PVC floor sheets－PVC floor sheets with backing
GB/T 8804.2-2003 Thermoplastic pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly (vinyl chloride)(PVC-U), chlorinated poly (vinyl chloride)(PVC - C) and high-impac
GB 12953-2003 Chlorinated polyethylene plastic sheets for waterproofing
GB/T 4219-1996 Hard polyvinyl chloride (PVC-U) pipes for chemical industry
GB/T 9646-1988 Unplasticized polyvinyl chloride (PVC-U) pipes-Determination of resistance to acetone
GB/T 12010.7-2010 Plastics—Poly(vinyl alcohol) (PVAL) materials—Part 7:Determination for sodium hydroxide contents
GB/T 12010.3-2010 Plastic—Poly(vinyl alcohol)(PVAL) materials—Part 3:Specification
GB/T 11982.1-2005 Polyvinyl chloride floor sheets Part 1: Polyvinyl chloride floor sheets with backing
GB/T 17643-1998 Geosynthetics - Polyethylene geomembrane

Taiwan Provincial Standard of the People's Republic of China

CNS 8551-2007 Polyethylene coated paper
CNS 2535-1992 Thermal Insulation Material Made of Polystyrene Foam
CNS 2444-1990 Polyethylene Bottle
CNS 6480-1987 Polyvinyl Chloride Joint ( for Plate )
CNS 8551-1982 Polyethylene Treated Paper
CNS 10487-1988 Polyethylene Foam for Heat Insulating
CNS 14442-2000 Rigid poly(viny1 chloride)(PVC)compounds and chlorinated poly(viny1 chloride)(CPVC)compounds
CNS 14664-2002 Chlorinated poly (vinyl chloride) plastic pipe
CNS 14345-2005 Unplasticized high impact polyvinyl chloride pipes
CNS 14808-2004 Chlorinated poly(vinyl chloride) (CPVC) plastic fittings
CNS 2536-1992 Method of Test for Thermal Insulation Material Made of Polystyrene Foam
CNS 3918-1976 Polystyrene Moulding Materials (for General Use)
CNS 4013-1976 Method of Test for Polystyrene Moulding Materials
CNS 15010-2006 Unplasticized high impact polyvinyl chloride pipe fittings for water works
CNS 11359-2000 Polyethylene (Cross - linked Polyethylene) Insulated and Polyvinyl Chloride (Polyethylene) Shelathed Fire - resistant Cables
CNS 2458-1993 High Density Polyethylene Pipes for Chemical Industrial and General Uses
CNS 2219-2005 Vinyl chloride and vinyl acetate co-polymer molding compounds

Group Standards of the People's Republic of China

T/CSRA 21-2022 Determination of plastic composition—Qualitative method of PE,PP,PS,PVC,EVA,PET in plastics
T/SHPTA 055-2023 Cold-resistant sheathing polyvinyl chloride (PVC) compounds for wire and cable
T/CACE 078-2023 Recycled carbon fibre polytetrafluoroethylene composites for wear-resistant
T/CSTM 00007-2019 Oxidized polyethylene homopolymers
T/GDC 228-2023 Corrosion-resistant HIPS material for refrigerator liner
T/ZZB 0827-2018 No-digging polyethylene pipes with crack-resist for water supply
T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
T/GMALDDC 01-2021 Geosynthetics high density Polyethylene geomembrane
T/CECS 10011-2022 Polyethylene blended PVC high-performance double-wall corrugated pipe
T/XJSL 0009-2024 Antioxidant masterbatch for polyethylene products

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 3048-2009 Anti-aging polyethylene particles

Professional Standard - Chemical Industry

HG/T 2899-1997 Designation of polytetrafluoroethylene materials
HG/T 2661-1995 Chlorosulfonated Polyethylene Anticorrosive Coatings (Two-component)
HG/T 2643-2023 Non-metallic chemical equipment - Acrylonitrile-butadiene-styrene (ABS), polyvinyl chloride (PVC), polypropylene homopolymer (PPH), polyvinylidene fluoride (PVDF) and glass fiber reinforced polypropylene (FRPP) diaphragm valve
HG/T 3690～3691-2022 Industrial steel skeleton polyethylene plastic composite pipes and industrial steel skeleton polyethylene plastic composite pipe fittings (2022)
HG/T 4338-2012 High-chlorinated Polyethylene Anti-corrosion Coatings
HG/T 4371-2012 Tower with PVC composite liner for chemical industry
HG/T 2704-1995 Chlorinated Polyethylene
HG/T 2704-2010 Chlorinated Polyethylene
HG/T 2704-2002 Chlorinated Polyethylene
HG/T 2737-2023 Non-metallic chemical equipment - Acrylonitrile-butadiene-styrene (ABS), polyvinyl chloride (PVC), polypropylene homopolymer (PPH), polyvinylidene fluoride (PVDF) and glass fiber reinforced polypropylene (FRPP) ball valve

工业和信息化部

QB/T 5445-2019 Ethylene-vinyl acetate copolymer foam sheet
HG/T 5780-2020 High chlorinated polyethylene resin for coatings
HG/T 5473-2018 Polyethylene oxide
QB/T 5079-2017 Technical specificiation for chlorinated polyethylene for unplasticized polyvinyl chloride(PVC-U) profiles
HG/T 6045-2022 Polyvinyl chloride (PVC) plastic sheets for chemical pressure equipment

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35504-2017 Plastic—Chlorinated poly(vinyl chloride)compounds
GB/T 34693-2017 Plastic-Chlorinated polyvinyl chloride) resins

Professional Standard - Light Industry

QB/T 4877-2015 Polytetrafluoroethylene tube
QB/T 1649-1992 Polystyrene Foam Plastic Packaging Material
QB/T 2029-1994 ABS/PVC Sheet Material
QB/T 1647-1992 No Base Metal Polyvinyl Chloride Plastic Sheet Material Floor
QB/T 3626-1999 Polytetrafluoroethylene Rod
QB/T 3625-1999 Polytetrafluoroethylene Plate
QB/T 3802-1999 Unplasticized polyvinyl chloride(PVC)fittings for chemical industry
QB/T 1650-1992 Rigid PVC foam sheet
QB/T 4885-2015 Masterbatch for compound materials of polystyrene (PS) sheet
QB/T 4041-2010 Polytetrafluoroethylene Rod
QB/T 5931-2023 General technical requirements for identification card set
QB/T 3801-1999 Test method of corrosion on the unplasticized polyvinyl chloride(PVC)pipes for chemical industry
QB/T 3624-1999 Polytetrafluoroethylene Tube

Shandong Provincial Standard of the People's Republic of China

DB37/T 2793-2016 Integral double urn funnel septic tank (polyethylene, co-polypropylene, glass fiber reinforced composite)
DB37/T 2792-2016 One-piece three-compartment septic tank (polyethylene, copolymerized polypropylene, glass fiber reinforced composite material)

Professional Standard-Packaging

BB/T 0066-2017 Polyethylene extrusion foaming packaging materials

Professional Standard - Agriculture

GBn 89-1980 Food packaging material: polystyrene resin
GBn 88-1980 Food packaging material: polyethylene resin

未注明发布机构

NF P24-504*NF EN 513:2018 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to artificial weathering
DIN EN ISO 15527 E:2012-09 Requirements and test methods for plastic polyethylene (ultra-high molecular weight polyethylene PE-UHMW, high-density polyethylene PE-HD) molded thin sheets (draft)
DIN EN 513 E:2017-12 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering
ASTM RR-F17-1011 1980 D2737-Standard Specification for Polyethylene (PE) Plastic Tubing
DIN EN ISO 6259-2 E:2019-09 Determination of tensile properties of thermoplastic pipes Part 2: Unplasticized polyvinyl chloride (PVC-U), oriented unplasticized polyvinyl chloride (PVC-O), chlorinated polyvinyl chloride (PVC-C) and high strength Pipes made of polyvinyl chloride (PVC-
DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)
JIS K 6745:2023 Plastics -- Unplasticized poly (vinyl chloride) sheets
DIN EN ISO 15527 E:2018-08 Requirements and test methods for plastic polyethylene (ultra-high molecular weight polyethylene PE-UHMW, high-density polyethylene PE-HD) molded thin sheets (draft)

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40006.6-2021 Plastics—Recycled plastics—Part 6: Polystyrene（PS）and impact-resistant polystyrene(PS-I) materials
GB/T 38286-2019 Polyethylene(PE),polypropylene(PP)and polystyrene(PS)resin—Determination of peroxide value
GB/T 40006.2-2021 Plastics—Recycled plastics—Part 2:Polyethylene(PE) materials

化学工业部

HG/T 2704-1994 Chlorinated polyethylene

Professional Standard - Speciality

ZB Q24001-1985 PVC building waterproof joint material

Professional Standard - Post and Telecommunication

YD/T 1485-2023 Polyethylene compounds for telecommunication optical fiber cable sheath

Professional Standard - Building Materials

JC/T 798-1997 Waterproofing polyvinyl chloride building jointing material
JC/T 684-1997 Waterproof sheet of chlorinated polyethylene blended with rubber

Professional Standard - Urban Construction

CJ/T 318-2009 Polyethylene of raised temperature resistance pipe for solar water heating system

Military Standard of the People's Republic of China-General Armament Department

GJB 9968-2021 Specification for modified polyvinyl alcohol composite materials
GJB 8272-2014 Specification for expanded polytetrafluoroethylene sealant
GJB 9969-2021 Specification for polyvinylidene chloride-based composites

Professional Standard - Recommended Standards for Engineering Construction

CECS 63-1994 Echnigue regulations for waterproof projects with reinforced chlorinateal polyethylene rubler sheet

Professional Standard - Machinery

JB/T 8560-2013 Carbonized Fibre/Polytetrafluoroethylene Braided Packing
JB/T 8560-1997 Carbonized Fibre/Teflon Mixed Woven Paddings

GSO

GSO EN 513:2021 Plastics - Poly (vinyl chloride) (PVC) based profiles - Determination of the resistance to artificial weathering
BH GSO EN 513:2022 Plastics - Poly (vinyl chloride) (PVC) based profiles - Determination of the resistance to artificial weathering
OS GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
BH GSO ISO 6402-2:2016 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 4433-3:2014 Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 3: Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC-C) pipes
OS GSO ISO 4433-3:2014 Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 3: Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC-C) pipes
GSO ISO 6401:2013 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method
GSO ISO 2561:2015 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BH GSO ISO 2561:2016 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
OS GSO ISO 2561:2015 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
OS GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
BH GSO ASTM D3261:2013 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
OS GSO ASTM D3350:2012 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
BH GSO ASTM D3350:2013 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
GSO 675:1997 UNPLASTICIZED POLYVINYL CHLORIDE (UPVC) PIPES FOR POTABLE WATER
OS GSO ASTM D3261:2012 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
GSO 1129:2002 POLYETHYLENE PIPES FOR GENERAL PURPOSES
GSO ISO 2507-2:2013 Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride)...
GSO ISO 10931:2013 Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system
BH GSO ISO 6259-2:2016 Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI)
GSO ISO 13924:2014 Plastics pipes and fittings -- Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles
GSO ISO 6453:2015 Polymeric materials, cellular flexible -- Polyvinylchloride foam sheeting -- Specification

ES-UNE

UNE-EN 513:2020 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to artificial weathering

German Institute for Standardization

DIN EN 513:2019-03 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to artificial weathering; German version EN 513:2018
DIN EN 513:2019 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to artificial weathering
DIN EN ISO 15494:2021-05 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and t...
DIN EN ISO 15494:2019 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the
DIN CEN/TS 14541:2007 Plastics pipes and fittings for non-pressure applications - Utilisation of non-virgin PVC-U, PP and PE materials; German version CEN/TS 14541:2007
DIN EN 513:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering; German version EN 513:1999
DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
DIN EN ISO 15494:2016 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the
DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 15493:2003 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system; Metric series (ISO 15493:2

SCC

NS-EN 513:2018 Plastics — Poly(vinyl chloride) (PVC) based profiles — Determination of the resistance to artificial weathering
DANSK DS/EN 513:2018 Plastics – Poly(vinyl chloride) (PVC) based profiles – Determination of the resistance to artificial weathering
AENOR UNE-EN ISO 15494:2016 Channeling systems in plastic materials for industrial applications. Polybutene (PB), polyethylene (PE), high temperature resistance polyethylene (PE-RT), cross-linked polyethylene (PE-X), polypropylene (PP). Metric series for...
DIN EN 513 E:2017 Draft Document - Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to artificial weathering; German and English version prEN 513:2017
DANSK DS/EN ISO 15494:2018 Plastics piping systems for industrial applications – Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) – Metric series for specifications for components and t...
NS-EN ISO 15494:2018 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and t...
AS K125:1963 Polyethylene (polythene) pipe extrusion compounds
HOLDEN HN 2360-2012 Polyethylene Based Coating Material
HOLDEN HN 2360-2000 Polyethylene Based Coating Material
DIN EN ISO 15494/A1 E:2020 Draft Document – Plastics piping systems for industrial applications – Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) – Metric series for specifications for...
AENOR UNE 53202:1976 PLASTIC MATERIALS. DETERMINATION OF VINYL ACETATE IN CHLORIDE-VINYL ACETATE COPOLYMERS
CAN/CSA-B137.9-M91-1991 Pressure pipes and fittings made of polyethylene-aluminum-polyethylene composite materials
HOLDEN HN 0025-1989 Wear Resistance of Vinyl Materials
HOLDEN HN 0025-2012 Wear Resistance of Vinyl Materials
AS 2070.2:1992 Plastics materials for food contact use - Poly(vinyl chloride) (PVC) compound
NS-EN ISO 15494:2015 Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and t...
AS 2070.2:1977 Plastics materials for food contact use - Polyvinyl chloride (PVC) compound
AENOR UNE-EN ISO 15493:2004 Channeling systems in plastic materials for industrial application. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C). Specifications for components and for the...
AENOR UNE-EN ISO 15493/A1:2004 Channeling systems in plastic materials for industrial application. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C). Specifications for components and for the...
BS 1493:1967 Specification for polystyrene moulding materials
BS EN ISO 15494:2015 Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP). Metric series for specifications for components and the...
BS 1493:1958 Specification for polystyrene moulding materials
AS 2070.1:1977 Plastics materials for food contact use - Polyethylene
DANSK DS/EN ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
BS 1493:1948 Specification for polystyrene moulding materials
NS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
AENOR UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 2: Preparation of test specimens and determinat...
AS 2070.1:1980 Plastics materials for food contact use - Polyethylene
AS 2070.1:1992 Plastics materials for food contact use - Polyethylene
DANSK DS/ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
BS 4023-2:1967 Specification for flexible cellular pvc sheeting. Chemically blown material
BS CP 3003-4:1965 Lining of vessels and equipment for chemical processes-Plasticized PVC sheet
BS ISO 15023-2:2003 Plastics. Poly(vinyl alcohol) (PVAL) materials. Determination of properties
BS EN ISO 15023-2:2006 Plastics. Poly(vinyl alcohol) (PVAL) materials-Determination of properties
BS ISO 2561:2006 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS 6564-2:1985 Polytetrafluoroethylene (PTFE) materials and products.-Specification for fabricated unfilled polytetrafluoroethylene products
SAE AMS-R-81828 Rubber, Chlorosulfonated Polyethylene Elastomer, Sheet and Molded Shapes, Ozone Resistant
CAN/CGSB-51.34-2022 BoardPolyethylene sheet for use in building construction – Material specification
NS-EN ISO 6402-1:2002 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
MIL MIL-R-81828-1971 RUBBER, CHLOROSULFONATED POLYETHYLENE ELASTOMER, SHEET AND MOLDED SHAPES, OZONE RESISTANT
BS 3126:1959 Specification for toughened polystyrene moulding materials
HOLDEN HN 1410-2001 Polytetrafluoro Ethylene Thermo Plastic Compound
DIN EN ISO 19065-2 E:2018 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
UNE-EN ISO 6402-1:2003 Plastics. Acrylonitrile-styrene-acrylate-(ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Part 1: Designation system and basis for specification...
NS-EN ISO 6402-2:2003 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determinat...
NS-EN ISO 6402-1:2001 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
AENOR UNE 53093:1970 Plastic materials. Specific viscosity of vinyl chloride polymers.
DIN EN ISO 19065-1 E:2013 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basi...
CAN3-A451.1-M86-1986(C2001) Adhesives for polystyrene insulation
AENOR UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 1: Designation system and basis for specificati...
AENOR UNE 53329-2:1978 Plastic materials. Determination of vinyl chloride in poly(vinyl chloride) resins, compounds and finished products, by gas chromatography.
DANSK DS/EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
NS-EN ISO 19065-1:2014 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
NS-EN 513:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors — Determination of the resistance to artificial weathering
DANSK DS/EN ISO 6259-2:2020 Thermoplastics pipes – Determination of tensile properties – Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chl...
NS-EN ISO 6259-2:2020 Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chl...
DANSK DS/ISO 6259-2:2020 Thermoplastics pipes – Determination of tensile properties – Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chlo...
BS 7655-10.1:1996 Specification for insulating and sheathing materials for cables. Polyethylene sheathing compounds-Thermoplastic medium density polyethylene (MDPE) sheathing compound
BS 3412:1966 Specification. Polyethylene materials for moulding and extrusion
HOLDEN HN 1136-2012 Polyethylene Moulding Compound
HOLDEN HN 1136-2001 Polyethylene Moulding Compounds
AENOR UNE 53304-6:1976 Plastic materials. Cured unsaturated polyester resins. Determination of unpolymerized styrene, by the Wijs method.
NS-EN ISO 2507-2:2017 Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride)...
BS 6564-1-1.1:1989 Polytetrafluoroethylene (PTFE) materials and products. Polytetrafluoroethylene powders for moulding and extrusion-Specification
BS 6564-2:1991 Polytetrafluoroethylene (PTFE) materials and products-Specification for fabricated unfilled polytetrafluoroethylene products
CSA C1321-1983 Guide for the Investigation of Seal Materials Polytetrafluoroethulene Plastic Tape
CAN/ULC-S701-2005 THERMAL INSULATION, POLYSTYRENE, BOARDS AND PIPE COVERING
AS 1463:1973 Polyethylene pipe extrusion compounds (metric units)
UNE 53975:1996 PLASTICS. POLYETHYLENE (PE) CONTAINERS. ENVIRONMENTAL STRESS-CRACK RESISTANCE.
MIL MIL-O-60540-1966 OBTURATING BANDS, PLASTIC, RIGID, HIGH IMPACT, POLYVINYL CHLORIDE (MOLDED)
AS 2070.7:1987 Plastics materials for food contact use - Polyvinylidene chloride (PVDC)
AS 2070.7:1992 Plastics materials for food contact use - Poly(vinylidene chloride) (PVDC)
10/30211408 DC BS ISO 2561. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography

British Standards Institution (BSI)

BS EN 513:2018 Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of the resistance to artificial weathering
BS ISO 4433-3:1997 Thermoplastic pipes. Resistance to liquid chemicals. Classification. Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly(vinyl chloride) (PVC-HI) and chlorinated poly(vinyl chloride) (PVC-C) pipes
BS EN 60811-406:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Resistance to stress cracking of polyethylene and polypropylene compounds
BS ISO 4433-4:1997 Thermoplastics pipes. Resistance to liquid chemicals. Classification. Poly(vinylidene fluoride) (PVDF) pipes
BS EN 17508:2021 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors. Terminology of PVC based materials
BS EN 13245-3:2010 Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications. Part 3: Designation of PVC-UE profiles
BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
BS EN ISO 15023-2:2003 Plastics - Poly(vinyl alcohol) (PVAL) materials - Determination of properties
BS ISO 4433-3:1998 Thermoplastic pipes - Resistance to liquid chemicals - Classification - Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly(vinyl chloride) (PVC-HI) and chlorinated poly(vinyl chloride) (PVC-C) pipes
BS EN ISO 15023-2:2019 Plastics. Poly(vinyl alcohol) (PVAL) materials. Determination of properties
BS ISO 2561:2023 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
14/30298254 DC BS EN 12106. Plastics piping systems. Polyethylene (PE) and crosslinked polyethylene (PE-X) pipes. Test method for the resistance to internal pressure after application of squeeze-of
BS 7655-10.1:2000 Specification for insulating and sheathing materials for cables - Polyethylene sheathing compounds - Thermoplastic medium density polyethylene (MDPE) sheathing compound
ASTM D3261-24 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
BS EN ISO 15527:2013 Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
BS 3241:1960 Specification for toughened polystyrene for sheet extrusion
23/30428206 DC BS ISO 2561. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS 4071:1966 Specification for polyvinyl acetate (PVA) emulsion adhesives for wood
BS DD CEN/TS 14541:2007 Plastics pipes and fittings for non-pressure applications. Utilisation of non-virgin PVC-U, PP and PE materials
BS EN ISO 6259-2:2020 Thermoplastics pipes. Determination of tensile properties - Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl…
BS EN 12106:1998 Plastics piping systems. Polyethylene (PE) pipes. Test method for the resistance to internal pressure after application of squeeze-off

American National Standards Institute （ANSI)

ANSI/ASTM F2855:2012 Specification for a Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
ANSI/ASTM D5260:1997 Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinatd Poly(Vinyl Chloride) (CPVC) compounds, Classification for (08.03)
ANSI/ASTM D5203:1998 Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer HDPE Sources (08.03)
ANSI/ASTM D3350:2001 Specification for Polyethylene Plastics Pipe and Fitting Materials
ANSI/ASTM F439:2013 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ANSI/ASTM D2737:2021 Standard Specification for Polyethylene (PE) Plastic Tubing
ANSI/ASTM D2846/D 2846Mb:2009 Specification For Chlorinated Poly(vinyl Chloride) (cpvc) Plastic Hot- And Cold-water Distribution Systems

YU-JUS

JUS G.S3.507-1987 Plastics. Pipes and fittings from polyethylene typ 1, polyethylene tip 3, polypropylene and unplasticized polyvinyl chloride. Chemical resistence with respect to fluids

American Society for Testing and Materials (ASTM)

ASTM F2855-11 Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
ASTM D5260-04(2010) Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-04 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-22 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-97 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-16 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM F1282-06 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM D6263-15 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
ASTM D6263-22 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
ASTM D6263-11 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
ASTM D3261-16 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ASTM D6817/D6817M-15 Standard Specification for Rigid Cellular Polystyrene Geofoam
ASTM D4349-96(2004) Classification System for Polyphenylene Ether (PPE) Materials
ASTM D4349-16 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials
ASTM D6817-06a Standard Specification for Rigid Cellular Polystyrene Geofoam
ASTM D6817-02 Standard Specification for Rigid Cellular Polystyrene Geofoam
ASTM D1784-99ae1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D3350-10 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D3261-10 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ASTM D6817-06 Standard Specification for Rigid Cellular Polystyrene Geofoam
ASTM D6817-07 Standard Specification for Rigid Cellular Polystyrene Geofoam
ASTM D6778-06 Standard Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials
ASTM D4976-06 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D4976-04 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D4976-02e1 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D4349-96 Standard Classification System for Polyphenylene Ether (PPE) Materials
ASTM D3350-14 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D4976-04a Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D4976-02 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D4976-12a(2020) Standard specifications for polyethylene plastic molding and extrusion materials
ASTM D4976-12a Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D4976-12 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D6263-23 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
ASTM D6263-22a Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
ASTM D6164/D6164M-11 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D4549-00 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D3350-06 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

IN-BIS

IS 2530-1963 Test methods for polyethylene molding materials and polyethylene compounds
IS 12240 Pt.8-1988 Test methods for polyvinyl chloride boots Part 8 Bending resistance of polyvinyl chloride upper materials
IS 2267-1972 Specification for polystyrene molding materials
IS 6312-1994 Polyethylene containers for the transport of materials - specification
IS 13292-1993 Polyvinyl chloride boots, resistant to chemicals. Specification (First Revision)

Defense Logistics Agency

DLA L-P-535 E NOTICE 4-2012 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID
DLA L-P-535 E NOTICE 3-1999 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID

Japanese Industrial Standards Committee (JISC)

JIS K 6731:1994 Ethylene/vinyl acetate copolymer materials
JIS K 6748:1995 Polyethylene moulding materials
JIS K 6870:1995 Polystyrene moulding materials
JIS A 9515:1989 Polyethylene foam for thermal insulation
JIS K 6730:1995 Testing methods for ethylene/vinyl acetate copolymer materials
JIS K 6784:1985 Rigid polyvinyl chloride (PVC) profiles
JIS K 6745:2015 Plastics -- Unplasticized poly (vinyl chloride) sheets
JIS K 6745:2008 Plastics -- Unplasticized poly (vinyl chloride) sheets
JIS K 6869:2009 Plastics -- Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
JIS K 6889:1995 Polytetrafluoroethylene rods
JIS K 6896:1995 Polytetrafluoroethylene powder for molding and extrusion materials

Korean Agency for Technology and Standards (KATS)

KS M 3353-1985 POLYETHYLENE MOULDING MATERIALS
KS M 3353-1990 POLYETHYLENE MOULDING MATERIALS
KS M 3353-1990(2001) POLYETHYLENE MOULDING MATERIALS
KS M 3158-1997 polystyrene molding material
KS M 3862-2001 Polyethylene foam for thermal insulation
KS M ISO 6110:2009 Moulded plastics footwear－Lined or unlined poly(vinyl chloride) industrial boots with chemical resistance－Specification
KS M ISO 6110:2004 Moulded plastics footwear－Lined or unlined poly(vinyl chloride) industrial boots with chemical resistance－Specification
KS I 3231-2016 Recycled plastics floorcovering — Polyvinylchloride
KS I 3231-2014 Recycled plastics floorcovering — Polyvinylchloride
KS M 3842-2010(2020) Plastics－Recycled moulding materials－Polyetylene(PE)
KS M 3842-2010 Plastics-Recycled moulding materials-Polyetylene(PE)
KS M 3842-2020 Plastics－Recycled moulding materials－Polyetylene(PE)
KS M 3844-2010(2020) Plastics－Recycled moulding materials－Polyvinyl chloride(PVC)
KS D 9202-2003(2018) Polyethylene composite pressure aluminum pipe
KS M 3844-2010 Plastics-Recycled moulding materials-Polyvinyl chloride(PVC)
KS M 3844-2020 Plastics－Recycled moulding materials－Polyvinyl chloride(PVC)
KS M ISO 6259-2-2008(2018) Thermoplastics pipes－Determination of tensile properties－Part 2：Pipes made of unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C) and high-impact poly(vinyl chloride)(PVC
KS M ISO 2561-2023 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M 3414-2009 Plastics piping systems for hot and cold water installations-Chlorinated poly(vinyl chloride)(PVC-C) pipes
KS M 3414-2015 Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) pipes
KS M 3352-1980 Polytetrafluoroethylene powder for molding and extrusion materials
KS M 3414-2003 Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) pipes
KS M ISO 6110-2009 Moulded plastics footwear－Lined or unlined poly(vinyl chloride) industrial boots with chemical resistance－Specification
KS M 3203-2004 POLYSTYRENE SHEETS
KS M ISO 2507-2:2005 Thermoplastics pipes and fittings－Vicat softening temperature ? Part 2：Test conditions for unplasticized poly(vinyl chloride)(PVC－U) or chlorinated poly(vinyl chloride)(PVC－C) pipes and fittings for high impact resistance poly(vinyl chloride)(PVC－HI) pipe
KS M 3807-2005 Recycled foam polystyrene thermal insulation material
KS T 1032-2004 Expanded polyethylene for packaging cushion
KS M ISO 6259-2:2008 Thermoplastics pipes－Determination of tensile properties－Part 2：Pipes made of unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C) and high-impact poly(vinyl chloride)(PVC-HI)
KS M 3360-1981 STYRENE-ACRYLONITRILE COPOLMER MOLDING AND EXTRUSION MATERIALS
KS M 3360-2002 STYRENE-ACRYLONITRILE COPOLMER MOLDING AND EXTRUSION MATERIALS
KS M ISO 6453:2009 Polymeric materials, cellular flexible－Polyvinylchloride foam sheeting－Specification
KS T 1037-2010 Polyethylene coated paper
KS M ISO 5999:2009 Polymeric materials, cellular flexible-Polyurethane foam for load-bearing applications excluding carpet underlay-Specification
KS M ISO 5999:2014 Polymeric materials, cellular flexible — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification
KS M ISO 2561-2013(2018) Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS T 1045-2006 Polystyrene foam for package cushioning
KS M 3523-2005 Polytetrafluoroethylene sheets
KS M 3407-2003(2018) General purpose polyethylene pipe
KS M ISO 6453-2009(2019) Polymeric materials, cellular flexible－Polyvinylchloride foam sheeting－Specification
KS M 3411-2023 Unplasticized poly(vinyl chloride)(PVC-U) pipes for industrial applications

ES-AENOR

UNE 53-188 Pt.1-1991 Plastics. Polythylene(PE) and ethylene copolymer thermoplastics. Part 1: Designation
UNE 53-329 Pt.1-1990 Determination of polyvinyl chloride in polyvinyl chloride polymers and composite materials by meteorological profile method
UNE 53-139 Pt.1-1989 PVC copolymer and homopolymer plastic materials. Part 1: Material use
UNE 53-140 Pt.1-1985 PVC copolymer and homopolymer plastic materials. Part 1: Purpose of materials
UNE 53-188 Pt.2-1991 Plastics. Polythylene(PE) and ethylene copoliner thermoplastics. Part 2: Preparation of test specimens and determination of properties

TR-TSE

TS 418-1966 PE PLASTIC P?PES
TS 2489-1977 POLYSTYRENE MOULDING MATERIAL
TS 3423-1979 PLASTICS - DESIGNATION OF IMPACT RESISTANT POLYSTYRENES
TS 1800-1975 POLYETHYLENE THERMOPLASTIC MATERIALS — DESIGNATION —
TS 3078-1978 PVC Plastic For Construction And Expansion Joints In Concrete Work (PCV Plastic Waterstop)
TS 3435-1979 PLASTICS - POLYSTYRENE MOULDING AND EXTRUSION MATERIALS - DESIGNATION

International Organization for Standardization (ISO)

ISO 4433-3:1997 Thermoplastics pipes - Resistance to liquid chemicals - Classification - Part 3: Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly(vinyl chloride) (PVC-HI) and chlorinated poly(vinyl chloride) (PVC-C) pipes
ISO 15494:2015 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the
ISO 2897:1976 Plastics — Designation of impact-resistant polystyrenes
ISO 1872:1972 Polyethylene thermoplastic materials — Designation
ISO 2897-1:1990 Plastics; impact-resistant polystyrene (SB) moulding and extrusion materials; part 1: designation
ISO 15494:2015/Amd 1:2020 Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — M
ISO 6259-2:2020 Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vin
ISO/DIS 2561:1975 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO/FDIS 2561:2023 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 6110:1982 Plastics moulded footwear — Lined or unlined polyvinyl chloride industrial boots with chemical resistance
ISO 6110:1992 Moulded plastics footwear; lined or unlined poly(vinyl chloride) industrial boots with chemical resistance; specification
ISO 4433-4:1997 Thermoplastics pipes - Resistance to liquid chemicals - Classification - Part 4: Poly(vinylidene fluoride) (PVDF) pipes
ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 2507-2:1995 Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PV
ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
ISO 6453:1985 Polymeric materials, cellular flexible; Polyvinylchloride foam sheeting; Specification
ISO 6259-2:1997 Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)
ISO 1622:1975 Plastics — Polystyrene moulding and extrusion materials — Designation
ISO 13957:1997 Plastics pipes and fittings - Polyethylene (PE) tapping tees - Test method for impact resistance
ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
ISO 15493:2003 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and piping systems; Metric series
ISO 8985:1998 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content

Lithuanian Standards Office

LST EN ISO 15494/A1:2021 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the
LST EN 513-2000 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering
LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

IT-UNI

UNI EN ISO 15494:2021 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the
UNI 5816-1966 Plastic material testing. Determination of vinyl acetate in chlorinated vinyl acetate copolymer
UNI 7055-1972 Polyethylene thermoplastic material (PP). Classification system
UNI 7872-1978 plastic material. Shockproof polystyrene (SB). Grading method
UNI 7066-1972 Polystyrene thermoplastic material (PS). Classification

CH-SNV

SN EN ISO 15494/A1:2021 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the

Association Francaise de Normalisation

NF T54-946*NF EN ISO 15494:2018 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the
NF T54-946:2015 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polythylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the s
NF T54-192:1995 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the
NF T54-946/A1*NF EN ISO 15494/A1:2020 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the
NF T54-192:1998 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the
NF EN ISO 19065-1:2015 Plastiques - Matériaux plastique acrylonitrile-styrène-acrylate (ASA), plastique acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et plastique acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 1 : s...
NF T51-105:1971 Plastics. Cold bend temperature of flexible polyvinyl chloride compound.
NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...
NF B56-031:1982 Panneaux fibragglo - (composites polystyrène) - Spécifications
NF T53-039-1*NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF T53-037-1:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF T54-947*NF EN ISO 15493:2004 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series
NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio

SAE - SAE International

SAE AMS-P-21922A-2016 Plastic Rods and Tubes@ Polyethylene

United States Navy

NAVY MIL-R-81828 VALID NOTICE 1-1991 RUBBER, CHLOROSULFONATED POLYETHYLENE ELASTOMER, SHEET AND MOLDED SHAPES, OZONE RESISTANT
NAVY MIL-R-81828-1971 RUBBER, CHLOROSULFONATED POLYETHYLENE ELASTOMER, SHEET AND MOLDED SHAPES, OZONE RESISTANT
NAVY MIL-R-81828 (1)-1977 RUBBER, CHLOROSULFONATED POLYETHYLENE ELASTOMER, SHEET AND MOLDED SHAPES, OZONE RESISTANT
NAVY MIL-P-24396 A-1994 PACKING MATERIAL, BRAIDED PTFE (POLYTETRAFLUOROETHYLENE)

GM Europe

GME QK 006400-1985 Polystyrol-Butadien-Copolymerisat Werkstofftypen Polystyrene-Butadiene-Copolymer Material Types GErman
GME QK 000302-1983 ABS-PVC-Formmasse (Regenerat) ABS-PVC-Compound (Regenerated Material) German
GME QK 000301-1983 ABS-PVC-Compound Folienmaterial ABS-PVC-Compound Foil Material German
GME QK 000304-1983 ABS-PVC-Compound Folienmaterial ABS-PVC-Compound Foil Material German [Replaced: GME QK 000305]
GME STD 518755-1997 Plastic 8755 PVC/ABS Plast 8755 PVC/ABS English/Swedish

Danish Standards Foundation

DS/EN ISO 15494:2020 Plastics piping systems for industrial applications – Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) – Metric series for specifications for components and the
DS/EN 513:2000 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering
DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DS/ISO 6259-2:2002 Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)

Indonesia Standards

SNI 12-1547-2005 PVC boots with chemical resistance

TH-TISI

TIS 1384-2005 Polyethylene foam thermal insulation
TIS 1861-1999 Polymeric materials, cellular flexible.polyvinylchloride foam sheeting.specification
TIS 655.1-2010 Plastic utensils for food.part 1: polyethylene, polpropylene, polystyrene, poly(ethylene terephthalate), poly (vinyl alcohol) and poly(methyl pentene)

CZ-CSN

CSN 64 3003-1972 Designation of polystyrene materials
CSN 64 3003-1985 Impact resistant polystyrenes Designation

US-FCR

FCR VA 07 54 19-2010 POLYVINYL-CHLORIDE (PVC) ROOFING
FCR VA 07 54 16-2010 ETHYLENE INTERPOLYMER (KEE) ROOFING

European Committee for Standardization (CEN)

EN ISO 15494:2015 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the
EN ISO 6259-2:2020 Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chlori
EN ISO 2507-2:2017 Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (P
EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997
prEN 513-1991 Unplasticised polyvinylchloride (PVC-U) profiles for the construction of windows; determination of the resistance to artificial weathering
EN ISO 15527:2013 Plastics - Compression-moulded sheets of polyethylene (PEUHMW@ PE-HD) - Requirements and test methods
EN ISO 15527:2022 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2022)
EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994
EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat

PL-PKN

PN-EN ISO 15494-2018-12/A1-2021-04 E Plastics piping systems for industrial applications--Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP)--Metric series for specifications for components and the sy
PN BN 6350-01-1965 Plastic film made of thermoplasticized polyvinyl chloride. Water resistance mark
PN-EN ISO 6259-2-2021-03 E Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chlo
PN BN 6353-01-1964 Reinforced plastic film made of thermoplasticized polyvinyl chloride
PN BN 3076-01-1966 Electrical insulation materials. Capacitor polystyrene tape

RU-GOST R

GOST R ISO 2507-2-2015 Thermoplastics pipes and fittings. Vicat softening temperature. Part 2. Test conditions for unplasticized polyvinylchloride, chlorinated polyvinylchloride pipes and fittings and high impact polyvinylchloride pipes

(U.S.) Plastic Pipe Association

PPI CHEMICAL-1997 Chemical& Abrasion Resistance of Corrugated Polythylene Pipe
PPI TR-35-1997 Chemical & Abrasion Resistance of Corrugated Polyethylene Pipe
PPI TN-41-2007 High Performance PE Materials for Water Piping Applications
PPI TN-30-2006 Requirements for the Use of Rework Materials in Manufacturing of Polyethylene Gas Pipe

CU-NC

NC 30-73-1988 Plastics Industry. Determination of pH from Aqueous Extract of. Poli-Vynil Chloride and Copolymers of Vynic Chloride. TesLing Method

GM Daewoo

GMKOREA EDS-M-7216-2011 Pipe chlorosulfonated polyethylene rubber
GMKOREA EDS-M-4309-2012 Weather Resistant Acrylonitrile-Butadiene- Stylene Copolymer
GMKOREA EDS-M-4301-2012 Heat Resistance Acrylonitrile- Butadiene-Styrene Copolymer

US-VA

VA 07 54 16-2010 ETHYLENE INTERPOLYMER (KEE) ROOFING

International Federation of Trucks and Engines

NAVISTAR MPAPS K-15-5009-2015 Polytetrafluoroethylene (PTFE) Seal Material

(U.S.) Ford Automotive Standards

FORD ESK-M4D469-A-1994 PVC MOLDING COMPOUND, COLD AND HEAT RESISTANT
FORD M3G233-A-2010 TAPE, POLYETHYLENE FOAM, PRESSURE SENSITIVE
FORD ESB-M4D317-A-1985 POLYVINYL CHLORIDE, INJECTION MOLDING COMPOUND, ELECTRICAL GRADE
FORD WSK-M4D844-A9-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), IMPACT RESISTANT MOLDING COMPOUND

KR-KS

KS M ISO 6110-2004 Moulded plastics footwear－Lined or unlined poly(vinyl chloride) industrial boots with chemical resistance－Specification
KS M ISO 2561-2013(2023) Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography

International Electrotechnical Commission (IEC)

IEC 60811-406:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds

RO-ASRO

STAS 7861-1980 IMPACT RESISTANT POLYSTYRENE
STAS 6896-1973 PLASTICS FOR BUILDING PURPO- SES Polyvinyl chloride handrail shape
STAS 7532-1983 Plastic packages POLYETHYLENE BAGS FOR CHEMICAL FERTILIZERS

SE-SIS

SIS 16 63 30-1971 Rigid polyvinylchloride compounds. General information

Cooling Technology Institute

CTI STD-136-2000 Polyvinyl Chloride and Chlorinated Polyvinyl Chloride Materials Used for Film Fill, Splash Fill, Louvers and Drift Eliminators

Society of Automotive Engineers (SAE)

SAE AMS-R-81828A-2011 Rubber, Chlorosulfonated Polyethylene Elastomer, Sheet and Molded Shapes, Ozone Resistant
SAE AMS-R-81828-2001 Rubber, Chlorosulfonated Polyethylene Elastomer, Sheet and Molded Shapes, Ozone Resistant

BE-NBN

NBN B 25-001-1988 Plastic joinery material, polyethylene chloride without plastic film facing, for streamlined windows

GM Holden Ltd

HOLDEN HN 1300-1976 Expanded Polyethylene Ethylene Vinyl Acetate Foam

ISUZU - Isuzu Motors Ltd.

ISC-C92-014A-2013 High Density Polyethylene Material，for Exterior

CEN - European Committee for Standardization

EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification
EN ISO 15527:2018 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW@ PE-HD) - Requirements and test methods
EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination

AENOR

UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
UNE-ISO 2561:2014 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
UNE 53975:2007 Plastics. Polyethylene (PE) containers. Environmental stress-crack resistance.

GM North America

GM GMP.PUR.030-1996 Polyurea Rim - Expanded Elastomer
GM GMP.PVC.062-2011 PVC - 70 Shore A, Weatherable, Elastomeric (Issue 2; Do Not Use on New Programs; Replaced by GMW16048)

FI-SFS

SFS 4388-1979 plastic. Polystyrene. Determination of styrene content depicted by vaporized chromium

AT-ON

ONORM C 9552 Teil.1-1988 Plastic moulding materials; Polyethylene (PE) moulding materials; Classification and designation
OENORM EN ISO 6259-2:2021 Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized polyvinyl chloride PVC-U, oriented unplasticized polyvinyl chloride PVC-O, chlorinated poly vinyl chloride PVC-C and high-impact poly vinyl chloride PVC-HI IS