Fairlead inspection specification template

Fairlead inspection specification template, Total:124 items.

The international standard classification for "Fairlead inspection specification template" includes: Other mining equipment , Wood-based panels in general , Equipment for processing of minerals , Services in general , Protection against crime .

The Chinese standard classification for "Fairlead inspection specification template" includes: Clamping fixtures , Promotion, storage and transportation equipment , Coal mine special equipment , Artificial board , Sieving, Sieve Plate and Sieve Screen , Supply and Use Relation , Crime judging technology .

未注明发布机构

DIN VDE 0472-506 Testing of cables, wires and flexible cords; capacitance unbalance [VDE Specification]
DIN VDE 0472-507 Testing of cables, wires and flexible cords; reduction factor [VDE Specification]
DIN VDE 0472-505 Testing of cables, wires and flexible cords; loss factor, dielectric loss coefficient and leakance [VDE Specification]
DIN 53142-2 E:2014-09 Testing of board - Puncture test - Part 2: Puncture test with linear move
DIN 53142-1 E:2014-09 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device

机械工业部

JB/T 6187.5-1992 16mm groove system combination fixture guide part double-sided groove hole drilling template
JB/T 6187.6-1992 16mm groove system combination fixture guide countersink hole drilling template
JB/T 6187.4-1992 16mm groove system combination fixture guide countersink drilling template

Military Standard of the People's Republic of China-General Armament Department

GJB 4822-1997*GJBz 20471-1997 Specifications for Inspection and Acceptance of Medium Wave Navigation Machines
GJB 8308-2015 General specifications for surface-to-surface missile synthetic aperture radar seekers

Group Standards of the People's Republic of China

T/CAME 5-2019 Specification and technical requirements for quality control phantom on MRI guided radiation therapy
T/QGCML 054-2020 Guide plate processing technical specification
T/CEC 301-2020 Code for inspection of safety performance of conduits for power cables
T/SXS 094-2024 Motorvehicle inspection agencies guide service management standards

Professional Standard - Aviation

HB 7146.2-1995 Large Series Combined Clamp Guiding Piece - Both Side Groove Counter Bore Mesopore Drill Plate
HB 7146.1-1995 Large Series Combined Clamp Guiding Piece - Both Side Groove Counter Bore Drill Plate

Professional Standard - Coal

MT/T 101-2000 Inspecting specification for gearbox of chain conveyors
MT/T 812-1999 Inspecting specification of scraper bar for chain conveyors
MT/T 104-1993 Scraper conveyor type inspection specification
MT/T 103-1995 Scraper conveyor of coal mine factory inspection standards
MT/T 101-1993 Inspecting specification for gearbox of chain conveyors

Professional Standard - Machinery

JB/T 14533-2023 Trimming and perforating dies for automobile high strength steel plates—Specifications

Liaoning Provincial Standard of the People's Republic of China

DB21/T 3156-2019 Specifications for third-party inspection and witness inspection of wire and cable products

国家质量监督检验检疫总局

SN/T 4901-2017 The criterion of inspection and quarantine information system analyse modeling

国家能源局

NB/T 10181-2019 Safety inspecting-testing specification of in-service power cable for coal mines

Professional Standard - Forestry

LY/T 1717-2007 Guide for sampling inspection of wood-based panels

Professional Standard - Commodity Inspection

SN/T 2650-2010 Protocol of the inspection and quarantine for imported and exported Haliotis diversicolor Aquatilis

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 19360-2003 Industrial plate screens--Specifications and test methods
GB/T 19360-2004 Industrial plate screens—Specifications and test methods

Shandong Provincial Standard of the People's Republic of China

DB37/T 3515-2019 Code for electrical safety testing and inspection of power cables in use in coal mines

Taiwan Provincial Standard of the People's Republic of China

CNS 14735.9-2003 Specification for flexible multilayer printed boards with through connections
CNS 5649-1987 Concrete formwork vibrator inspection method
CNS 14735-9-2003 Specification for flexible multilayer printed boards with through connections

Professional Standard - Aerospace

QJ 1889-1990 Metallographic inspection method for metallized holes in printed circuit boards

Professional Standard - Goods and Materials

WB/T 541017-2002 Inspect standard for wood flooring surface during guarantee
WB/T 1017-2006 Inspection standard for wooden flooring during guarantee period

Professional Standard - Post and Telecommunication

YD/T 2758-2014 Inspection regulations for telecommunication optical fibre cables

Professional Standard - Electricity

DL/T 717-2000 Technical guide for the nondestructive testing of turbine-generator rotor bores
DL/T 717-2013 Technical Guide for the Nondestructive Testing of Turbine-generator Rotor Bores

Yunnan Provincial Standard of the People's Republic of China

DB53/T 1064.3-2021 Green Peacock Quarantine Technology Part 3: Technical Specifications for Feather Lice Laboratory Testing

Professional Standard - Public Safety Standards

GA/T 1759-2020 Forensic sciences—Specifications for revealing examination of blurry words

Professional Standard - Petroleum

SY/T 6446-2000 Specification for making quality control targets for testing shaped chargs of well

Professional Standard - Electron

SJ 51428/6-1999 Cable,optical fiber,fiber-guided,torpedo,Detail specification for

Professional Standard - Ferrous Metallurgy

YB/T 9251-1994 Composite steel formwork quality inspection and evaluation standards

IN-BIS

IS 4981-1984 Specification for casting template guide pins
IS 460 Pt.2-1985 Specification for test sieves Part 2 Orifice plate test sieves
IS 1379-1985 Non-porous surface inks, marking specifications (with or without stencils)
IS 3133-1965 Specification for chemical equipment manholes and inspection holes
IS 1234-1980 Specification for inks, stencils, oil-based for marking porous surfaces
IS 10308-1982 Tracheostomy Tubes and Guides Specification CUBLEY MODEL
IS 3302-1986 Template backplane specifications
IS 6154-1971 Specification for perforated plates for dryers
IS 460 Pt.3-1985 Test sieve specifications Part 3 Test sieve aperture inspection method
IS 4208-1985 Brushes and template specifications
IS 8608-1977 Orthopedic countersink standard pilot type
IS 7737-1975 Forceps, punches, and cervical biopsy specifications

German Institute for Standardization

DIN VDE 0472-507:1983 Testing of cables, wires and flexible cords; reduction factor [VDE Specification]
DIN VDE 0472-623:1983 Testing of cables, wires and flexible cords; elongation at break of copper conductor [VDE Specification]
DIN VDE 0472-506:1983 Testing of cables, wires and flexible cords; capacitance unbalance [VDE Specification]
DIN VDE 0472-812:1984 Testing of cables, wires and flexible cords; continuity of metallic coatings [VDE Specification]
DIN VDE 0472-625:1983 Testing of cables, wires and flexible cords; traction relief for cables and insulated wires by strain-bearing elements [VDE Specification]
DIN 53142-1:2004 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN 53142-1:2014 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN 53142-2:2004 Testing of board - Puncture test - Part 2: Puncture test with linear move
DIN 53142-2:2014 Testing of board - Puncture test - Part 2: Puncture test with linear move
DIN VDE 0472-505:1983 Testing of cables, wires and flexible cords; loss factor, dielectric loss coefficient and leakance [VDE Specification]
DIN 57472-401:1984 Testing of cables, wires and flexible cords; outer dimensions [VDE Specification]
DIN VDE 0472-621:1983 Testing of cables, wires and flexible cords; crystallite melting point VDE Specification
DIN 57472-623:1983 Testing of cables, wires and flexible cords; elongation at break of copper conductor [VDE Specification]
DIN VDE 0472-619:1983 Testing of cables, wires and flexible cords; indentation strength VDE Specification
DIN 57789-100:1984 Classrooms and laboratories fitments equipment and furniture safety specification for powered constructional units [VDE Specification]
DIN 57472-621:1983 Testing of cables, wires and flexible cords; crystallite melting point [VDE Specification]
DIN VDE 0472-805:1994 Testing of cables, wires and flexible cords; ozone resistance
DIN 57472-507:1983 Testing of cables, wires and flexible cords; reduction factor [VDE Specification]
DIN 57472-619:1983 Testing of cables, wires and flexible cords; indentation strength [VDE Specification]
DIN EN 188200:1996 Sectional specification: Optical fibres A1 category graded index multimode; German version EN 188200:1995
DIN EN 188202:1996 Family specification: A1b graded index multimode optical fibres; German version EN 188202:1995
DIN EN 188201:1996 Family specification: A1a graded index multimode optical fibres; German version EN 188201:1995
DIN 2173:2008 Countersinks and counterbores, tools with pilot and shank - Technical specifications
DIN 2173-1:1983 Countersinks and counterbores; technical specifications for tools with pilot and shank
DIN VDE 0289-4:1988 Definitions for cables, wires and flexible cords for power installation; testing

British Standards Institution (BSI)

BS 470:1984 Specification for inspection, access and entry openings for pressure vessels
BS 1813:1974 Specification for dimensions of conduit dies, diestocks and guides
BS 1722-14:2017 Fences. Specification for open mesh steel panel
BS 6511:1984 Specification for designation of perforations in industrial plate screens
BS 1813:1974(2011) Specification for Dimensions ofconduit dies, diestocks and guides
BS 4G 178-2:1986 Crimped joints for aircraft electrical cables and wires - Specification for control of crimping (including user control tests)

IT-UNI

UNI 2333-1943 Perforated steel plate for inspection mesh screen

American Society for Testing and Materials (ASTM)

ASTM E323-09 Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM E323-11(2021) Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM D3753-05 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells
ASTM D3753-05e1 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells
ASTM E454-11 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM A435/A435M-90(1996) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
ASTM E323-11 Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM A577/A577M-90(1996) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
ASTM A577/A577M-17(2023) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
ASTM E454-80(2004) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E674-12(2021) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E454-12(2021) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E674-80(2004) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)

HU-MSZT

MNOSZ 5167-1956 Boring template. External thickening of threads for entry inspection
MSZ 6562-1960 Flow formwork application ring, one web formwork on check internal threaded holes 30, 100mm

ZA-SANS

NRS 011-2001 Pilot cables

SCC

BS 1669:1972 Specification for industrial perforated plates
BS G 206:1969 Specification for Fepsil type electric cables with copper conductors
UNE 20621-4:1983 PRINTED BOARDS. SPECIFICATION FOR SINGLE AND DOUBLE SIDED BOARDS WITH PLAIN HOLES
AS CA70:1971 Design and construction of formwork (known as the SAA Formwork Code)
UNE 20621-5:1985 PRINTED BOARDS. SPECIFICATION FOR SINGLE AND DOUBLE SIDED BOARDS WITH PLATED-THROUGH HOLES

(U.S.) Telecommunications Industries Association

TIA TSB107-1999 Guideline for the Satistical Specification of Polarization Mode Dispersion on Optical Fiber Cables

Korean Agency for Technology and Standards (KATS)

KS B 4050-2013 Test code for performance and accuracy of computerizednumerically controlled table type drilling machines for plate

ES-AENOR

UNE 7-050 Pt.4-1985 Technical requirements and inspection of test sieves and perforated plate sieves

CZ-CSN

CSN 04 4363-1961 Drilling gauges for drilling of holea for guide pins of moulding boxes and pattern plates

API - American Petroleum Institute

API SPEC 3-1959 SPECIFICATION FOR CABLE- DRILLING TOOLS (R 1974)

RU-GOST R

GOST 10751-1985 Cable electrical conductive paper. Specifications
GOST 2021-1990 Ship's steel manholes. Specifications
GOST 34329-2017 Formworks. General specifications
GOST R 52085-2003 Formworks. General specifications

NATO - North Atlantic Treaty Organization

ANEP-78-2007 NAVAL SURFACE SHIPS MISSION ORIENTED MANOEUVRING REQUIREMENTS - SPECIFICATION AND VERIFICATION TEMPLATES - (ED 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phon

International Organization for Standardization (ISO)

ISO 10630:1994 Industrial plate screens - Specifications and test methods

GSO

DL/T 717-1996 Technical Guidelines for Inspection of Rotor Center Hole of Steam Turbine Generator Sets
GSO ISO 13542:2015 Paper and board -- Specification for internal diameters of cores for reels
DL/T 551-1994 Technical guideline for creep hole inspection of low alloy heat resistant steel

International Electrotechnical Commission (IEC)

IEC 60794-1-303:2023 Optical fibre cables - Part 1-303: Generic specification - Basic optical cable test procedures - Ribbon dimensions - Aperture gauge, method G3

Others: