Airgel Compression Standard

Airgel Compression Standard, Total:181 items.

The international standard classification for "Airgel Compression Standard" includes: Hoses and hose assemblies , Seals , Rubber and plastics products , Latex and raw rubber , Refrigerating technology .

The Chinese standard classification for "Airgel Compression Standard" includes: Rubber tube, rubber belt and tape , Rubber seal , Forestry chemical raw material , Refrigeration equipment .

Taiwan Provincial Standard of the People's Republic of China

CNS 808-1986 Rubber Hoses for Compressed Air
CNS 10019-1983 Method of Test for Compression of Vulcanized Rubber

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 8291-1987 Natural rubber latex concentrate--Determination of coagulum content
GB/T 1186-2016 Rubber hoses,textile-reinforced,for compressed air－Specification
GB/T 23662-2022 Rubber seals for use between concrete paving sections
GB/T 1186-1992 Rubber hose for air supply
GB/T 1186-2007 Rubber hoses textile-reinforced for compressed air—Specification
GB/T 23662-2009 Rubber seals for use between concrete motorway paving sections

Professional Standard - Chemical Industry

HG/T 3098-2004 Rubber vulcanized - preformed compression seals for use between concrete motorway paving sections - specification for material
HG/T 2701-1995 Compression (YS) Type Packer Rubber for Oil-gas Field
HG/T 2070-2023 Rubber compression flexometer

Military Standard of the People's Republic of China-General Armament Department

GJB 10246.2-2021 Test methods for mechanical properties of fiber reinforced airgel insulation materials Part 2: Compression properties
GJB 251-1987 Low compression permanent deformation fluororubber compound

未注明发布机构

DIN EN ISO 2398:1997 Rubber hoses, textile-reinforced, for compressed air - Specification
DIN EN 680:1994 Determination of the drying shrinkage of autoclaved aerated concrete
CGA V-9-2024 COMPRESSED GAS ASSOCIATION STANDARD FOR COMPRESSED GAS CYLINDER VALVES
DIN EN ISO 2398 E:2015-10 Specification for fabric reinforced rubber hoses for compressed air (draft)
DIN EN ISO 18623-1 E:2015-09 Air compressors and compressed air systems Part 1: Safety requirements for air compressors (draft)

Group Standards of the People's Republic of China

T/QGCML 2268-2023 Low-concentration coalbed methane enrichment and compressed natural gas compression system
T/QGCML 348-2022 Airgel Insulation Panel
T/QGCML 2267-2023 Low-concentration coalbed methane concentration to produce compressed natural gas compression and purification system

工业和信息化部

JC/T 2669-2022 Insulating glass unit filled with aerogel
HG/T 2701-2022 Compression rubber element for packer
HG/T 2701-2016 Compression rubber element for packer

Professional Standard - Agriculture

GB 8291-1987 Natural rubber latex concentrate; Determination of coagulum content

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1455-2014 airgel insulation

Professional Standard - Machinery

JB/T 9056-1999 Positive displacement refrigerant compressor condensing units

(U.S.) Ford Automotive Standards

FORD FLTM BP 001-04-2001 COMPRESSION CHARACTERISTICS OF CURED SILICONE POLYGEL

BE-NBN

NBN 658-1970 Rubber hose for compressed air
NBN B 15-220 ADD 1-1970 Concrete test. compression
NBN EN 680-1994 Determination of the drying shrinkage of autoclaved aerated concrete

TH-TISI

TIS 508-2002 Aluminium hydroxide compressed gel for pharmaceutical industry
TIS 642-1986 Standard for rubber hoses for compressed air
TIS 1229-1994 Compressed hydrogen

Japanese Industrial Standards Committee (JISC)

JIS K 6332:1995 Rubber hoses for compressed air
JIS Z 6009:1994 Silver-gelatin type microfilms -- Processing and storage
JIS B 8392-2:2022 Compressed air -- Contaminant measurement -- Part 2: Oil aerosol content
JIS K 6332:1999 Rubber hose, textile-reinforced, for compressed air -- Specification

TR-TSE

TS 745-1979 RUBBER HOSES FOR COMPRESSED AIR

British Standards Institution (BSI)

BS EN 680:2005 Determination of the drying shrinkage of autoclaved aerated concrete
BS ISO 8573-2:2007 Compressed air - Test methods for oil aerosol content
BS ISO 12500-1:2007 Filters for compressed air - Test methods - Oil aerosols
BS ISO 8573-2:2018 Compressed air. Contaminant measurement. Oil aerosol content
BS EN ISO 2398:2024 Rubber hoses, textile-reinforced, for compressed air. Specification
BS EN ISO 2398:2008 Rubber hoses, textile-reinforced for compressed air - Specification
BS EN 1355:1997(1999) Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
BS EN ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air. Specification
BS ISO 2398:1996 Rubber hose, textile-reinforced, for compressed air. Specification

International Organization for Standardization (ISO)

ISO 2398:1987 Industrial rubber hose for compressed air (up to 2,5 MPa)
ISO 2398:1975 Title missing - Legacy paper document
ISO 2398:1978 Industrial rubber hose for compressed air (up to 2,5 MPa)
ISO 2398:1995 Rubber hose, textile-reinforced, for compressed air - Specification
ISO 2398:2024 Rubber hoses, textile-reinforced, for compressed air
ISO 4635:1982 Rubber, vulcanized; Preformed compression seals for use between concrete motorway paving sections; Specification for material
ISO/PRF 2398:2024 Rubber hoses, textile-reinforced, for compressed air — Specification
ISO/DIS 2398 Rubber hoses, textile-reinforced, for compressed air — Specification
ISO 1920-9:2009 Testing of concrete - Part 9: Determination of creep of concrete cylinders in compression
ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air - Specification
ISO 12500-1:2007 Filters for compressed air - Test methods - Part 1: Oil aerosols
ISO 8573-2:2018 Compressed air - Contaminant measurement - Part 2: Oil aerosol content
ISO 8573-2:2007 Compressed air - Part 2: Test methods for oil aerosol content
ISO 2398:2006 Rubber hoses, textile-reinforced, for compressed air - Specification
ISO/DIS 18623-1 Air compressors and compressed air systems — Part 1: Air compressor safety requirements

Danish Standards Foundation

DS/ISO 2398:1981 Industrial rubber hose for compressed air (up to 2,5 MPa)
DS/EN 680:2006 Determination of the drying shrinkage of autoclaved aerated concrete
DS/EN 680:1994 Determination of the drying shrinkage of autoclaved aerated concrete
DS/EN ISO 2398:2009 Rubber hoses, textile-reinforced, for compressed air - Specification

SCC

BS 5118:1980 Specification for rubber hoses for compressed air
DANSK DS/EN 680:2006 Determination of the drying shrinkage of autoclaved aerated concrete
NS-EN 680:1993 Determination of the drying shrinkage of autoclaved aerated concrete
AENOR UNE-EN 680:2006 Determination of the drying shrinkage of autoclaved aerated concrete
BS EN 680:1994 Determination of the drying shrinkage of autoclaved aerated concrete
NS-EN 680:2005 Determination of the drying shrinkage of autoclaved aerated concrete
BS ISO 8573-2:1996 Compressed air for general use-Test methods for aerosol oil content
DANSK DS/EN 1355:1997 Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
BS EN ISO 2398:1997 Rubber hose, textile-reinforced, for compressed air. Specification
AENOR UNE-EN 1355:1997 Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
NS-EN 1355:1996 Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
AS A27:1934 Making compression tests on concrete
BS 1881-115:1986 Testing concrete-Specification for compression testing machines for concrete
UNE-EN ISO 2398:2009 Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2006)
NS-EN ISO 2398:2008 Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2006)
NS-EN ISO 2398:1997 Rubber hose, textile-reinforced, for compressed air — Specification (ISO 2398:1995)
NS-EN ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air — Specification (ISO 2398:2016)
DANSK DS/EN ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air – Specification (ISO 2398:2016)
DANSK DS/EN 1352:2004 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure

Lithuanian Standards Office

LST EN 680-2006 Determination of the drying shrinkage of autoclaved aerated concrete
LST EN ISO 2398:2009 Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2006)

NO-SN

NS-EN 680-1994 Determination of the drying shrinkage of autoclaved aerated concrete

SE-SIS

SIS SS 13 73 09-1982 Autoclaved aerated concrete - Determination of modulus of elasticity at compression
SIS SS-ISO 2398:1990 Industrial rubber hose for compressed air (up to 2,5 MPa)
SIS SS-ISO 6199:1991 Micrographics — Microfilming of docu- ments on 16 mm and 35 mm silver-gelatin type microfilm — Operating procedures
SIS SS 13 11 10-1984 Concrete testing — Hardened concrete - Compression testing machines
SIS SS 13 11 10-1980 Concrete testing — Hardened concrete — Compression testing machines

AENOR

UNE-EN 680:2006 Determination of the drying shrinkage of autoclaved aerated concrete
UNE 83507:2004 Concrete with fibres. Testing in compression
UNE-EN ISO 2398:2017 Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016)

Association Francaise de Normalisation

NF F11-380:1994 Railway rolling stock. Compressed-air rubber hoses.
NF P18-406:1981 Concretes. Compression test.
NF F11-380:2017 Railway rolling stock - Compressed-air rubber hoses
NF EN 1355:1997 Determination of compressive creep of autoclaved cellular concrete and open-structure lightweight aggregate concrete
NF T47-252*NF EN ISO 2398:2017 Rubber hoses, textile-reinforced, for compressed air - Specification
NF EN ISO 2398:2017 Tuyaux en caoutchouc renforcés textile pour l'air comprimé - Spécifications
NF P19-107*NF EN 680:2006 Determination of the drying shrinkage of autoclaved aerated concrete.
NF P19-107:1994 Determination of the drying shrinkage of autoclaved aerated concrete.
NF ISO 12500-1:2007 Filtres pour air comprimé - Méthodes d'essai - Partie 1 : aérosols d'huile
NF E51-301-2:2007 Compressed air - Part 2 : test methods for oil aerosol content.
NF E51-251-1*NF ISO 12500-1:2007 Filters for compressed air - Test methods - Part 1 : oil aerosols.
NF E51-301-2*NF ISO 8573-2:2018 Compressed air - Contaminant measurement - Part 2 : oil aerosol content
NF T47-252:2009 Rubber hoses, textile-reinforced, for compressed air - Specification.
NF F11-380:2023 Railway rolling stock - Flexible rubber-based hoses for compressed air
NF T47-252:1997 Rubber hose, textile-reinforced, for compressed air. Specification.
NF M82-271:1985 Coal mining equipment. Rubber-based flexible hoses for compressed air (operating pressure lower than or equal to 10 bar).

CZ-CSN

CSN 49 2611-1966 Boards of compressed laminated wood
CSN 65 4435-1997 Compressed hydrogen gas
CSN 65 4335-1996 Compressed nitrogen gas
CSN 65 4405 Z1-1999 compressed oxygen
CSN 65 4305-1997 Compressed argon gas
CSN 65 4405-1997 Compressed oxygen gas
CSN 62 1441-1955 Multiple compression rubber tests
CSN 65 4335 Z1-1999 Nitrogen compression

Korean Agency for Technology and Standards (KATS)

KS B ISO 8573-2-2003(2008) Compressed air for general use－Test methods for aerosol oil content
KS X ISO 6197-1:2005 Microfilming of press cuttings-Part 1:16 mm Silver-gelatin type roll microfilm
KS M ISO 2398-2017(2022) Rubber hose, textile-reinforced, for compressed air－Specification
KS M ISO 2398-2022 Rubber hose, textile-reinforced, for compressed air－Specification
KS X ISO 6197-1:2002 Microfilming of press cuttings－Part 1：16 mm Silver－gelatin type roll microfilm
KS B ISO 8573-2-2013 Compressed air for general use－Test methods for aerosol oil content
KS L 0702-2020 Aerogel blanket thermal insulation
KS M ISO 2398:2012 Rubber hose, textile-reinforced, for compressed air－Specification
KS X ISO 6199:2007 Micrographics－Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm－Operating procedures
KS M ISO 2398:2017 Rubber hose, textile-reinforced, for compressed air－Specification
KS B ISO 8573-2:2013 Compressed air for general use－Test methods for aerosol oil content
KS B ISO 8573-2:2003 Compressed air for general use-Test methods for aerosol oil content

German Institute for Standardization

DIN EN 680:2006-03 Determination of the drying shrinkage of autoclaved aerated concrete; German version EN 680:2005
DIN EN ISO 2398:2017-03 Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016), German version EN ISO 2398:2016 / Note: To be replaced by DIN EN ISO 2398 (2023-03) (in preparation).
DIN EN 1355:1997-02 Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1355:1996

NL-NEN

NEN-EN 680-1994 Determination of the drying shrinkage of autoclaved aerated concrete
NEN-EN 747-1-1993 Furniture. Bunk bed for domestic use. Part 1: Safety requirements

RO-ASRO

STAS 11354-1985 RUBBER HOSES FOR INDUSTRIAL USE COMPRESSED AIR FOR LIGHT DUTY
STAS 5585-1971 TESTS OF CONCRETE Dctermination of the modulus of compressibilily of concrete
STAS SR ISO 2398:1995 Industrial rubber hose for compressed air (up to 2,5 MPa)

European Committee for Standardization (CEN)

prEN 680-1992 Determination of the drying shrinkage of autoclaved aerated concrete
EN 680:1993 Determination of the Drying Shrinkage of Autoclaved Aerated Concrete
EN 680:2005 Determination of the drying shrinkage of autoclaved aerated concrete
EN ISO 2398:2008 Rubber hoses, textile-reinforced, for compressed air - Specification

Indonesia Standards

SNI 3418-2011 Cara uji kandungan udara dalam beton segar dengan metode tekan

RU-GOST R

GOST ISO 2398-2014 Rubber-textile hoses for compressed air. Technical requirements

GSO

BH GSO ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air -- Specification
BH GSO ISO 8573-2:2016 Compressed air -- Part 2: Test methods for oil aerosol content
OS GSO ISO 2398:2015 Rubber hoses, textile-reinforced, for compressed air -- Specification
OS GSO ISO 8573-2:2013 Compressed air -- Part 2: Test methods for oil aerosol content
OS GSO ISO 12500-1:2014 Filters for compressed air -- Test methods -- Part 1: Oil aerosols
GSO ISO 6197-1:1995 Microfilming of press cuttings - Part 1: 16 mm silver-gelatin type roll microfilm.
GSO ISO 2398:2015 Rubber hoses, textile-reinforced, for compressed air -- Specification
OS GSO ISO 6197-1:1995 Microfilming of press cuttings - Part 1: 16 mm silver-gelatin type roll microfilm.

KR-KS

KS M ISO 2398-2017 Rubber hose, textile-reinforced, for compressed air－Specification
KS X ISO 6197-1-2002 Microfilming of press cuttings－Part 1：16 mm Silver－gelatin type roll microfilm

BSI

DANSK DS/ISO 2398:2024 Rubber hoses, textile-reinforced, for compressed air – Specification

ZA-SANS

SANS 2398:2008 Rubber hoses, textile-reinforced, for compressed-air - Specification
SANS 5863:2006 Concrete tests - Compressive strength of hardened concrete

GOSTR

GOST R ISO 12500-1-2009 Filters for compressed air. Test methods. Part 1. Oil aerosols

Compressed Gas Association (U.S.)

CGA V-9-2012 Compressed gas association standard for compressed gas cylinder valves
CGA V-9-2009 Compressed gas association standard for compressed gas cylinder valves

ES-AENOR

UNE 53 514 Rubber compression fatigue testing
UNE 83-304-1984 Concrete testing. Compression fracture

Building Officials and Code Administrators International(U.S.)

BOCA CHAPTER 27 NFPC-1993 Compressed Gases
BOCA ARTICLE 24 NFPC COMM-1990 Compressed Gases
BOCA CHAPTER 27 NFPC COMM-1993 Compressed Gases
BOCA CHAPTER 27 NFPC-1996 Compressed Gases
BOCA CHAPTER 27 NFPC-1999 Compressed Gases

PL-PKN

PN C84913-1974 Compressed air
PN C84910-1970 Compressed oxygen

Society of Automotive Engineers (SAE)

SAE AMS3356-1956 SILICONE RUBBER Lubricating Oil and Compression Set Resistant, Electrical Grade (55 - 65)
SAE AMS3304B-1952 SILICONE RUBBER Low Compression Set (65-75)
SAE AMS3356C-1978 SILICONE RUBBER Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65
SAE AMS3356A-1965 SILICONE RUBBER Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65
SAE AMS3356B-1976 SILICONE RUBBER Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65

Defense Logistics Agency

DLA QPL-19180-43-2005 REGULATORS, PRESSURE, COMPRESSED GAS

AT-ON

ONORM EN 680-1994 Determination of the drying shrinkage of autoclaved aerated concrete

DIN

DIN EN ISO 2398:2024 Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2024); German version EN ISO 2398:2024

GM Europe

GME B 040 0960-2011 Compressed air

Others: