The correct way to hold test tubes for chemical experiments

The correct way to hold test tubes for chemical experiments, Total:276 items.

The international standard classification for "The correct way to hold test tubes for chemical experiments" includes: Rubber and plastics products , Protection against dangerous goods , Education , Aromatic hydrocarbons , Electroacoustics , Application of statistical methods , Quality management and quality assurance , Product and company certification. Conformity assessment , Other treatments and coatings , Petroleum products and natural gas handling equipment , Laboratory medicine .

The Chinese standard classification for "The correct way to hold test tubes for chemical experiments" includes: Rubber products in general , Marking, packaging, transport and storage in general , Special instruments for teaching , Organic chemicals in general , Acoustic Measurement , Mathematics , Standardization and Quality Management , Processing technology in general , Power capacitor , Sanitation in general .

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2797-2023 Specifications for confirmation of chemical analysis methods in testing laboratories
DB14/T 2798-2023 Specification for verification of chemical analysis methods in testing laboratories

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6379.6-2009 Accuracy(trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
GB/T 21853-2008 Testing of chemicals - Partition coefficient（n-octanol/water）- Shake flask method
GB/T 17531-1998 Rubber and rubber products--Determination of accuracy and bias of chemical test methods
GB/T 21781-2008 Test methods for melting point and melting range of chemical products - Capillary tube method
GB/T 18589-2001 Correction of atmospheric pressure for distillation test of products of coal carbonization
GB/T 21747-2008 Educational laboratory equipment—Safety requirements and test methods for laboratory workbenches
GB/T 42553-2023 Electroacoustics—Methods to determine corrections to obtain the free-field response of a sound level meter
GB/T 6379-1986 Precision of test methods--Determination of repeatability and reproducibility for a standard test method by interlaboratory tests

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 27417-2017 Comformity assessment--Guidance on validation and verification of chemical analytical methods
GB/T 35655-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Chromatography
GB/T 35656-2017 Guideline for verification and validation of chemical analysis method and internal quality control―Method on reporting qualitative test reports

Professional Standard - Energy

NB/SH/T 6001-2020 Standard guide for conducting an interlaboratory study todetermine the precision of a test methal

Professional Standard - Petroleum

SY/T 0039-1997 Test method for chemical stability of pipeline anticorrosion level
SY/T 0039-2013 Test Method for Chemical Resistance of Pipeline Coatings

Group Standards of the People's Republic of China

T/CSTM 00961-2022 Chemical composition quantitative analytical methods - General rules for evaluation of accuracy　（trueness and precision）compliance

Professional Standard - Machinery

JB/T 7510-1994 Technological Parameter Optimization Method - Orthogonal Test Method
JB/T 8957-1999 Method for verifying accuracy of tan delta measurements applicable to capacitors

Professional Standard - Commodity Inspection

SN/T 2497.16-2010 Test method of import and export dangerous chemicals—Part 16:Western　Blot
SN/T 2497.15-2010 Test method of import and export dangerous chemicals—Part 15:Test of PCR-SSCP
SN/T 2497.19-2010 Test method of import and export dangerous chemicals—Part 19:Test of Northern Blot
SN/T 2497.23-2010 Test method of import and export dangerous chemicals—Part 23:Separation of cellular organelles

Professional Standard - Agriculture

CNAS-TRL-011-2020 Guidelines for Validation and Validation of Chemical Analysis Methods for Light Industrial Products

国家卫生计生委

WS/T 493-2017 Guide to the estimation of the measurement uncertainty of reference methods in enzymology reference laboratiories

Professional Standard - Building Materials

JC/T 478.2-1992 Test method of construction lime. Chemical analysis method

Professional Standard - Chemical Industry

HG/T 5579～5583-2019 Test methods for activity of terephthalic acid hydrotreating catalysts, chemical composition analysis methods and activity test methods for polyethylene oxide catalysts, test methods for activity test methods for n-olefin to isobutylene catalysts in lique

Standard Association of Australia （SAA）

AS 2850:1986 Chemical analysis - Interlaboratory test programs - For determining precision of analytical method(s) - Guide to the planning and conduct
AS/NZS 1462.1:2001 Methods of test for plastics pipes and fittings Method 1: Method for determining the dimensions of pipes and fittings
AS/NZS 1462.6:1998 Methods of test for plastics pipes and fittings Method 6: Method for hydrostatic pressure testing of pipes

GSO

GSO ISO 175:2015 Plastics -- Methods of test for the determination of the effects of immersion in liquid chemicals
GSO ISO/TR 24430:2007 Paints and varnishes – Guidelines for the determination of the Precision of a test method by interlaboratory trials
GSO BS 1377-3:2024 Methods of test for soils for civil engineering purposes - Chemical and electro-chemical testing
OS GSO ISO/TR 24430:2007 Paints and varnishes – Guidelines for the determination of the Precision of a test method by interlaboratory trials
GSO 1196:2002 COSMETIC PRODUCTS — METHODS OF TEST FOR CHEMICAL DEPILATORIES
GSO ISO 7373:2013 Ferroalloys -- Experimental methods for checking the precision of sample division

SCC

BS 5173-5:1977 Methods of test for hoses-Chemical resistance tests
AMCA 240-15 Laboratory Methods of Testing Positive Pressure Ventilators for Aerodynamic Performance Rating
BS 4658:1970 Methods of test for textiles - preparation of laboratory test samples and test specimens for chemical testing
AMCA 240-22 Laboratory Methods of Testing Positive Pressure Ventilators for Aerodynamic Performance Rating
AWWA ACE60071 Selecting the Right Approach to Validation Testing: Three Options and Lessons Learned
BS PD ISO/TR 12705:2011 Graphic technology. Laboratory test method for chemical ghosting in lithography
AASHTO T 224-2001(2004) Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
AS/NZS 1462.1:1996 Methods of test for PVC pipes and fittings, Method 1: Method for determining the dimensions of pipes and fittings
BS 4550-2:1970 Methods of testing cement-Chemical tests
BS 784:1953 Methods of test for chemical stoneware
BS 1673-2:1954 Methods of test for raw rubber and unvulcanized compounded rubber. Methods of chemical testing
BS 5497-1:1987 Precision of test methods-Guide for the determination of repeatability and reproducibility for a standard test method by inter-laboratory tests
AWWA JTMGT64442 Implementing a Sustainable Approach to Buried Asset Management: A Canadian Success Story
DANSK DS/ISO 5725-6:1995 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
BS 4658:1978 Methods of test for textiles. Preparation of laboratory test samples and test specimens for chemical testing
AS 1462.4:1984 Methods of test for unplasticized PVC (UPVC) pipes and fittings, Method 4: Method of determining reversion of UPVC pipes
NS-EN 14414:2004 Geosynthetics — Screening test method for determining chemical resistance for landfill applications
DANSK DS/EN 14414:2004 Geosynthetics - Screening test method for the determining chemical resistance for landfill applications
BS 1672-2:1954 Methods of testing rubber latex. Chemical and physical tests
NS 2949:1972 Plastics pipes - Method for toxicological test
BS 2782-5 METHOD 540D:1995 Methods of testing plastics. Optical and colour properties, weathering-Methods of exposure to laboratory light sources. General guidance
DIN EN ISO 26101-2 E:2023 Draft Document - Acoustics - Test methods for the qualification of the acoustic environment - Part 2: Determination of the environmental correction (ISO/DIS 26101-2:2023); German and English version prEN ISO 26101-2:2023
UNE 102032:1999 GYPSUM BUILDING PLASTERS. CHEMICAL TEST METHODS.
BS PD 6528:1990 Method for verifying accuracy of tan delta measurements applicable to capacitors
CEI EN 62585:2013 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 68-1997 Laboratory Method of Testing to Determine the Sound Power in a Duct (AMCA 330-97)

International Organization for Standardization (ISO)

ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO 5725:1986 Precision of test methods; Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests
ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
ISO/TR 9474:1993 Rubber and rubber products; determination of accuracy and bias of chemical test methods
ISO 3085:2002 Iron ores - Experimental methods for checking the precision of sampling, sample preparation and measurement
ISO 5725-6:1994/cor 1:2001 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values; Technical Corrigendum 1
ISO 16140-4:2020/DAmd 1 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory — Amendment 1: Validation of a larger test portion size for qualitative methods
ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO/TR 24697:2011 Textiles and textile products - Guidelines on the determination of the precision of a standard test method by interlaboratory trials
ISO 16140-4:2020/CD Amd 1 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory — Amendment 1: Annex H - Validation of larger test portion size for qualitative methods
ISO/TR 24430:2003 Paints and varnishes - Guidelines for the determination of the precision of a test method by interlaboratory trials
ISO 12744:1997 Copper, lead and zinc sulfide concentrates - Experimental methods for checking the precision of sampling
ISO/TS 24498:2022 Paper, board and pulps — Estimation of uncertainty for test methods by interlaboratory comparisons
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 680:1990 Cement; test methods; chemical analysis

American National Standards Institute （ANSI)

ANSI/ASTM D5642:2009 Test Method For Sealed Tube Chemical Compatibility Test
ANSI/AMCA 240-2015 Laboratory Methods of Testing Positive Pressure Ventilators for Aerodynamic Performance Rating
ANSI/AMCA 240-2006 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/AMCA 240-1996 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/ASTM C560:2005 Test Methods for Chemical Analysis of Graphite
ANSI/ASTM E2554:2013 Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program
ANSI/ASTM E2653a:2009 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer than Six Participating Laboratories

Danish Standards Foundation

DS/ISO 5725:1982 Precision of test methods. Determination of repeatability and reproducibility by interlaboratory tests
DS/EN ISO 175:2010 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals
DS/EN ISO 3822-1/A1:2009 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement - Amendment 1: Measurement uncertainty
DS/EN 14414:2004 Geosynthetics - Screening test method for the determining chemical resistance for landfill applications
DS/EN 62585:2013 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter

American Society for Testing and Materials (ASTM)

ASTM E180-03 Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals
ASTM C802-96(2008)e1 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-09a Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM D5642-09 Standard Test Method for Sealed Tube Chemical Compatibility Test
ASTM C802-96(2002) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-09 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-14 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM D5642-16(2022) Standard Test Method for Sealed Tube Chemical Compatibility Test
ASTM D5642-99 Standard Test Method for Sealed Tube Chemical Compatibility Test
ASTM C802-96 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM D5642-16 Standard Test Method for Sealed Tube Chemical Compatibility Test
ASTM D5642-99(2004) Standard Test Method for Sealed Tube Chemical Compatibility Test
ASTM G20-10(2024) Standard Test Method for Chemical Resistance of Pipeline Coatings
ASTM G20-10(2019) Standard Test Method for Chemical Resistance of Pipeline Coatings
ASTM G20-88(1996)e1 Standard Test Method for Chemical Resistance of Pipeline Coatings
ASTM A255-10(2018) Standard Test Methods for Determining Hardenability of Steel
ASTM D4016-08 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
ASTM G20-10(2015) Standard Test Method for Chemical Resistance of Pipeline Coatings
ASTM A255-20a Standard Test Methods for Determining Hardenability of Steel
ASTM A255-20 Standard Test Methods for Determining Hardenability of Steel
ASTM D5202/D5202M-16 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils
ASTM A751-21 Standard Test Methods and Practices for Chemical Analysis of Steel Products
ASTM D6936-17 Standard Test Method for Determining Demulsibility of Emulsified Asphalt
ASTM D4356-84(1996) Standard Practice for Establishing Consistent Test Method Tolerances
ASTM A751-01 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
ASTM G20-88(2002) Standard Test Method for Chemical Resistance of Pipeline Coatings
ASTM E691-20 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-19e1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D4016-93 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
ASTM E534-98(2003) Standard Test Methods for Chemical Analysis of Sodium Chloride
ASTM E534-98 Standard Test Methods for Chemical Analysis of Sodium Chloride
ASTM E691-05 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-19 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-18 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-14 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-23 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-15 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-13 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-12 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-16 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E2653-15 Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM D4467-94(2001) Standard Practice for Interlaboratory Testing of a Textile Test Method That Produces Non-Normally Distributed Data
ASTM D896-97 Standard Test Method for Resistance of Adhesive Bonds to Chemical Reagents
ASTM D4467-94 Standard Practice for Interlaboratory Testing of a Textile Test Method That Produces Non-Normally Distributed Data
ASTM A751-07a Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
ASTM A751-07 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
ASTM E534-18 Standard Test Methods for Chemical Analysis of Sodium Chloride
ASTM C802-14(2022) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM E396-98 Standard Test Methods for Chemical Analysis of Cadmium
ASTM E439-10 Standard Test Methods for Chemical Analysis of Beryllium
ASTM E396-17 Standard Test Methods for Chemical Analysis of Cadmium
ASTM E396-24 Standard Test Methods for Chemical Analysis of Cadmium
ASTM E534-08 Standard Test Methods for Chemical Analysis of Sodium Chloride
ASTM E396-05 Standard Test Methods for Chemical Analysis of Cadmium
ASTM E439-04 Standard Test Methods for Chemical Analysis of Beryllium
ASTM E534-13 Standard Test Methods for Chemical Analysis of Sodium Chloride
ASTM E180-99 Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals
ASTM G20-10 Standard Test Method for Chemical Resistance of Pipeline Coatings
ASTM E439-98 Standard Test Methods for Chemical Analysis of Beryllium
ASTM E396-04 Standard Test Methods for Chemical Analysis of Cadmium
ASTM E396-12 Standard Test Methods for Chemical Analysis of Cadmium
ASTM E396-05(2011) Standard Test Methods for Chemical Analysis of Cadmium
ASTM D7778-12 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E315-04 Standard Test Methods for Chemical Analysis of Molybdenum
ASTM E439-04a Standard Test Methods for Chemical Analysis of Beryllium
ASTM E396-12e1 Standard Test Methods for Chemical Analysis of Cadmium
ASTM D244-23 Standard Test Methods and Practices for Emulsified Asphalts
ASTM E502-07e1 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM C481-99 Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM E37-05 Standard Test Methods for Chemical Analysis of Pig Lead
ASTM E118-89(2004) Standard Test Methods for Chemical Analysis of Copper-Chromium Alloys
ASTM D4016-02 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
ASTM D7005/D7005M-16 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
ASTM C1285-97 Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses: The Product Consistency Test (PCT)
ASTM C481-99(2005) Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM C560-15 Standard Test Methods for Chemical Analysis of Graphite
ASTM E37-05(2011) Standard Test Methods for Chemical Analysis of Pig Lead
ASTM E367-09 Standard Test Methods for Chemical Analysis of Ferroniobium
ASTM C481-99(2011) Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM E367-22 Standard Test Methods for Chemical Analysis of Ferroniobium
ASTM D896-04 Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents
ASTM E2554-07 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program
ASTM D1278-91a(2002)e1 Standard Test Methods for Rubber from Natural Sources-Chemical Analysis
ASTM C481-99(2016) Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM E37-00 Standard Test Methods for Chemical Analysis of Pig Lead
ASTM D1278-91a(2002) Standard Test Methods for Rubber from Natural Sources-Chemical Analysis
ASTM D4642-92(1998) Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM D1762-84(2013) Standard Test Method for Chemical Analysis of Wood Charcoal
ASTM D2799-09 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
ASTM D7778-15 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D1762-84(2001) Standard Test Method for Chemical Analysis of Wood Charcoal
ASTM C791-04 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide

IT-UNI

UNI 971-1939 Glass for chemical laboratories. Sample tube (test tube)

KE-KEBS

KS 08-126 Pt.2-1978 KENYA STANDARD METHODS FOR PREPARING LABORATORY TEST SAMPLES AND TEST SPECIMENS OF TEXTILE MATERIALS FOR CHEMICAL TESTS PART 2. METHODS FOR SAMPLING COTTON FABRICS FOR CHEMICAL TESTS

Japanese Industrial Standards Committee (JISC)

JIS B 6191:1993 Machine tools -- Geometric accuracy tests and practical tests -- Tests methods
JIS K 0068:2001 Test methods for water content of chemical products
JIS K 2301 AMD 1:2022 Fuel gases and natural gas -- Methods for chemical analysis and testing (Amendment 1)
JIS K 0066:1992 Test methods for distillation of chemical products
JIS K 0065:1992 Test method for freezing point of chemical products
JIS K 0063:1992 Test methods for optical rotation of chemical products
JIS K 0062:1992 Test methods for refractive index of chemical products
JIS K 0069:1992 Test methods for sieving of chemical products
JIS K 6225 AMD 1:2023 Rubber, vulcanized -- Preparation of samples and test pieces -- Chemical tests (Amendment 1)
JIS A 1145:2001 Method of test for alkali-silica reactivity of aggregates by chemical method
JIS A 1145:2017 Method of test for alkali-silica reactivity of aggregates by chemical method
JIS A 1145:2007 Method of test for alkali-silica reactivity of aggregates by chemical method

German Institute for Standardization

DIN EN ISO 26101-2:2023-02 Acoustics - Test methods for the qualification of the acoustic environment - Part 2: Determination of the environmental correction (ISO/DIS 26101-2:2023); German and English version prEN ISO 26101-2:2023 / Note: Date of issue 2023-01-13
DIN ISO 5725-4:2003 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method (ISO 5725-4:1994)
DIN EN ISO 175:2011-03 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010); German version EN ISO 175:2010
DIN ISO 5725-6:2002-08 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values (ISO 5725-6:1994 including Technical Corrigendum 1:2001)
DIN ISO 5725-6:2002 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values (ISO 5725-6:1994 including Technical Corrigendum 1:2001)
DIN ISO 5725-5 Berichtigung 1:2006 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998), Corrigenda to DIN ISO 5725-5:2002-11 (ISO 5725-5:1998/Cor. 1:2005
DIN EN 62585:2013-03 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter (IEC 62585:2012); German version EN 62585:2012

IN-BIS

IS 9735-1981 Test method for determining maximum experimental safety clearance
IS 9022-1979 Laboratory test samples of textile materials for chemical testing and methods of preparation of test samples

British Standards Institution (BSI)

PD ISO/TR 12705:2011 Graphic technology. Laboratory test method for chemical ghosting in lithography
23/30433783 DC BS EN ISO 26101-2. Acoustics. Test methods for the qualification of the acoustic environment - Part 2. Determination of the environmental correction
BS 4550 Pt.2:1970 Methods of testing cement. Chemical tests
BS 1309:1974 Methods of sampling and chemical testing of leather
BS ISO 12744:2006 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the precision of sampling
BS ISO 9022-10:1995 Optics and optical instruments. Environmental test methods. Combined sinusoidal vibration, dry heat or cold

AASHTO - American Association of State Highway and Transportation Officials

T 224-2001 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
T 224-2010 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test

Lithuanian Standards Office

LST EN ISO 175:2011 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
LST EN 14414-2004 Geosynthetics - Screening test method for determining chemical resistance for landfill applications

AENOR

UNE-EN ISO 175:2011 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
UNE-EN 16565:2014 Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap
UNE-EN 15384-1:2017 Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1: Sodium chloride test
UNE-EN 14414:2004 Geosynthetics - Screening test method for determining chemical resistance for landfill applications
UNE-EN 62585:2013 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter

The American Road & Transportation Builders Association

AASHTO T 224-2010 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
AASHTO TP47-1994 Standard Test Methods for Determining the Ecological Effects of Deicing Chemicals 2000 Edition

AT-ON

OENORM EN 16565-2021 Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap

European Committee for Standardization (CEN)

prEN 16565-2021 Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap
PD CEN/TR 15175:2006 Characterization of sludges - Protocol for organizing and conducting inter-laboratory tests of methods for chemical and microbiological analysis of sludges
FprEN ISO 26101-2 Acoustics - Test methods for the qualification of the acoustic environment - Part 2: Determination of the environmental correction (ISO/FDIS 26101-2:2024)
EN 15384-1:2017 Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1: Sodium chloride test
prEN 75-1980 Methods of testing cement; chemical analysis of cement

Korean Agency for Technology and Standards (KATS)

KS B 0822-1992 Standard test method for determination of aggregates impacting value ? Method of test FOR CHEMICAL ANALYSIS
KS A ISO 5725-4-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 4：Basic methods for the determination of the trueness of a standard measurement method
KS E ISO 3085:2003 Iron ores－Experimental methods for checking the precision of sampling, sample preparation and measurement
KS A ISO 5725-4:2012 Accuracy(trueness and precision) of measurement methods and results-Part 4:Basic methods for the determination of the trueness of a standard measurement method
KS K 0440-2023 Test method for man-made filament yarns
KS M 0006-2010(2020) Test methods for optical rotation of chemical products
KS M 0006-1995 Test methods for optical rotation of chemical products
KS K 3103-2016(2021) Test method of chemical resistance from ultrafiltration hollow fiber membrane
KS M 0064-1997 Test methods for sieving of chemical products
KS F 2824-2016 Simplified test method for determining shading coefficient of shading devices
KS M 0008-2010 Test methods for distillation of chemical products
KS E ISO 12744:2008 Copper, lead, zinc and nickel concentrates－Experimental methods for checking the precision of sampling
KS M 0064-2022 Test methods for sieving of chemical products
KS M 0064-2017(2022) Test methods for sieving of chemical products
KS K ISO 5089:2019 Textiles — Preparation of laboratory test samples and test specimens for chemical testing
KS F 2545-2002 Testing method for potential reactivity of aggregates(Chemical method)
KS K 0345-2016(2021) Test method for chemical fibre tire cords

Society of Automotive Engineers (SAE)

SAE J2792-2008 Test Methodology for Evaluating the Chemical Compatibility of Wheel Finishes with Various Chemicals

BSI

DANSK DS/ISO 26101-2:2024 Acoustics – Test methods for the qualification of the acoustic environment – Part 2: Determination of the environmental correction

RU-GOST R

GOST 30159-1994 Wood chemical products. Provision of accuracy for testing methods
GOST R ISO 5725-6-2002 Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values
GOST R IEC 851-4-1994 Methods of test for winding wires. Chemical properties
GOST 21400-1975 Chemical and laboratory glass. Technical specifications. Test methods
GOST R 22.9.15-2014 Safety in emergencies. Technical means of chemical detection. Test methods

PL-PKN

PN P04600-1991 Textiles. Determination of the precision of test methods by inter-laboratory tests

Association Francaise de Normalisation

NF EN 1744-1/IN1:2014 Essais visant à déterminer les propriétés chimiques des granulats - Partie 1 : analyse chimique
NF X06-041-5*NF ISO 5725-5:1998 Application statistics - Accuracy (trueness and precision) of measurement methods and results - Part 5 : alternative methods for the determination of the precision of a standard measurement methods.
NF EN 1744-1+A1:2014 Essais visant à déterminer les propriétés chimiques des granulats - Partie 1 : analyse chimique
NF ISO 5725-4:2020 Accuracy (trueness and precision) of measurement results and methods - Part 4: basic methods for determining the accuracy of a standardized measurement method
NF U47-019:2000 Animal health analysis methods - Guide to good practices for implementation of ELISA techniques.
NF EN ISO 175:2011 Plastics - Test methods for determining the effects of immersion in liquid chemicals
XP P94-065:2023 Soils: recognition and tests - Hole Erosion Test - Principle and laboratory test method for determining the erosion resistance characteristics of conduits

Indonesia Standards

SNI 07-0958-1989 Chemical test method for brase/ bronze

ES-AENOR

UNE 41-169-1989 Concrete bricks. Test method for determination of actual concentration of concrete
UNE 41-167-1989 Concrete bricks. Defined test methods for specification and verification of form
UNE 7 058 Test method for sandstone resistance to chemical agents

(U.S.) Ford Automotive Standards

FORD FLTM INDEX VOL 1-2006 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 1 CHEMICAL TEST METHODS

European Association of Aerospace Industries

AECMA PREN 3976-1999 Aerospace Series Titanium and Titanium Alloys Test Method Chemical Analysis for the Determination of Hydrogen Content Edition P 1

VN-TCVN

TCVN 6910-6-2002 Accuracy (trueness and precision) of measurement methods and results.Part 6: Use in practice of accuracy values

PH-BPS

PNS 11-1983 Sampling and Method of Test for Chemical Analysis of Soaps

YU-JUS

JUS B.D8.090-1981 Ceramic tiles. Testing methods for resistance against chemicals

GOSTR

GOST R 58327-2018 Soils. Laboratory method for determining parameters of relaxation
GOST R 58326-2018 Soils. Laboratory method for determining the overconsolidation characteristics

NZ-SNZ

AS/NZS 4659.3:1999 Guide to Determining the Equivalence of Food Microbiology Test Methods Part 3: Confirmation Tests (Incorporating Amendment 1: 02/2002)

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.3-1998 Chemical Test Mtheods Revision Q

KR-KS

KS K ISO 5089-2019 Textiles — Preparation of laboratory test samples and test specimens for chemical testing

BE-NBN

NBN-EN 196-2-1991 Methods of testing cement - Chemical analysis of cement

CEN - European Committee for Standardization

EN 196-2:1989 AMD 1 Methods of Testing Cement; Chemical Analysis of Cement

Others: