Headspace Standard Joining Method

Headspace Standard Joining Method, Total:204 items.

The international standard classification for "Headspace Standard Joining Method" includes: Microbiology in general , Ambient atmospheres , Chemical analysis of metals , Geology. Meteorology. Hydrology , Protection against crime .

The Chinese standard classification for "Headspace Standard Joining Method" includes: Health quarantine , Environmental sanitation , Precious metals and its alloy analysis method , Hydrology and water conservancy instrument , Crime judging technology .

Group Standards of the People's Republic of China

T/NAIA 0278-2024 Determination of soil available molybdenum Standard addition method
T/WBPP 0602-2019 Processing Standards of Wubao Handmade Hollow Dried Noodles
T/CADBM 73-2023 Vocational skill standards for ceiling workers

National Health Commission of the People's Republic of China

GBZ/T 335-2024 Standard headspace gas chromatography method for determination of trichloroacetic acid in urine (replacing WS/T 96—1996)

Professional Standard - Commodity Inspection

SN/T 1422-2015 Control standards for medical vector in entry-exit airplane
SN/T 1249-2015 Assessing standard of sanitary supervision for entry-exit aircrafts
SN/T 1422-2004 Control standards for medical vector organisms in entry-exit airplane
SN/T 2769-2011 Entry-exit Port Flight Cartering Hygiene Standard
SN/T 1249-2003 Assessing stadard of sanitary supervision for entry-exit aircrafts

未注明发布机构

ASTM RR-D08-2001 2022 D8052/D8052M-Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies
DIN EN 15841 E:2008-08 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition

中华人民共和国国家卫生和计划生育委员会

GB/T 17095-1997 Hygienic standard for inhalable particulate matter in indoor air

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 25934.2-2010 Methods for chemical analysis of high purity gold - Part 2: Inductively coupled plasma mass spectrometry standard enter emendation-inner standard method - Determination of impurity
GB/T 12746-1991 Standard penetrometer
GB 12746-1991 Standard penetrometer

Professional Standard - Urban Construction

CJJ/T 284-2018 Technical standard for mechanical pipe jacking of heating engineering

Professional Standard - Public Safety Standards

GA/T 208-2019 Forensic sciences—Examination methods for phosphide in biological samples—HSGC and HSGC-MS

Professional Standard - Petroleum

SY 6981-2014 Installation Standard for Warm Air Heating and Air Conditioning Systems

American Society for Testing and Materials (ASTM)

ASTM F1247-89(1996)e1 Standard Specification for Intrusion Resistant Generic Vault Structures
ASTM D5076-90(2000)e1 Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes
ASTM F1247-89(2018) Standard Specification for Intrusion Resistant Generic Vault Structures
ASTM D5076/D5076M-13(2019) Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes
ASTM D7586/D7586M-11 Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies
ASTM D5810-96(2021) Standard Guide for Spiking into Aqueous Samples
ASTM D8052/D8052M-17 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
ASTM D8052/D8052M-22 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
ASTM D727-96(2001) Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method
ASTM D727-96(2006) Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method
ASTM D727-96 Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method
ASTM D1586/D1586M-18e1 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
ASTM D1586-08 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
ASTM F2714-08 Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
ASTM F2714-08(2021) Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
ASTM D3871-84(2017) Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling
ASTM F1615-95(2009) Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
ASTM D3871-84(1995)e1 Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling
ASTM F1615-95(1999) Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
ASTM F1615-95(2004) Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
ASTM D3871-84(2024) Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling
ASTM D5788-95(2024) Standard Guide for Spiking Organics into Aqueous Samples
ASTM D5788-95(2017) Standard Guide for Spiking Organics into Aqueous Samples
ASTM D5788-95(2005) Standard Guide for Spiking Organics into Aqueous Samples
ASTM F1521-12(2018) Standard Test Methods for Performance of Range Tops
ASTM D4334-99 Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
ASTM E2766-13(2019) Standard Practice for Installation of Roof Mounted Photovoltaic Arrays on Steep-Slope Roofs
ASTM E1680-16(2022) Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems
ASTM D4526-96(2007) Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
ASTM F2714-08(2013) Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
ASTM D4526-20 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
ASTM D2164-83(1994)e1 Standard Methods of Testing Structural Insulating Roof Deck
ASTM E108-80a Standard Methods of Fire Tests Of Roof Coverings
ASTM D4971-02(2006) Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Using the Diametrically Loaded 76-mm (3-in.) Borehole Jack
ASTM D4526-96 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
ASTM D2164-83(2000) Standard Methods of Testing Structural Insulating Roof Deck
ASTM D4971-08 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
ASTM D4971-02 Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Using the Diametrically Loaded 76-mm (3-in.) Borehole Jack
ASTM D519-90(1995)e1 Standard Test Method for Length of Fiber in Wool Top
ASTM F420-04(2009) Standard Test Method for Access Depth Under Furniture of Vacuum Cleaners
ASTM F420-04 Standard Test Method for Access Depth Under Furniture of Vacuum Cleaners
ASTM D5019-07 Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
ASTM D519-04(2008) Standard Test Method for Length of Fiber in Wool Top
ASTM F420-04(2014) Standard Test Method for Access Depth Under Furniture of Vacuum Cleaners
ASTM D5019-07a Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
ASTM D454-04 Standard Test Method for Rubber Deterioration by Heat and Air Pressure
ASTM D454-99 Standard Test Method for Rubber Deterioration by Heat and Air Pressure
ASTM E1554/E1554M-13(2023) Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
ASTM D865-99(2005) Standard Test Method for Rubber-Deterioration by Heating in Air (Test Tube Enclosure)
ASTM D865-99 Standard Test Method for Rubber-Deterioration by Heating in Air (Test Tube Enclosure)
ASTM D4526-12 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
ASTM E108-07 Standard Test Methods for Fire Tests of Roof Coverings
ASTM C406/C406M-10 Standard Specification for Roofing Slate
ASTM C406/C406M-22 Standard Specification for Roofing Slate
ASTM D312/D312M-16a(2023) Standard Specification for Asphalt Used in Roofing
ASTM E108-20 Standard Test Methods for Fire Tests of Roof Coverings
ASTM E108-07a Standard Test Methods for Fire Tests of Roof Coverings
ASTM C406/C406M-15 Standard Specification for Roofing Slate
ASTM E108-17 Standard Test Methods for Fire Tests of Roof Coverings
ASTM E108-16e1 Standard Test Methods for Fire Tests of Roof Coverings
ASTM D6021-22 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
ASTM E108-20a Standard Test Methods for Fire Tests of Roof Coverings
ASTM D6021-96(2001)e1 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
ASTM F620-06 Standard Specification for Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants
ASTM F620-00 Standard Specification for Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants
ASTM E2964-14e1 Standard Test Method for Measurement of the Normalized Insertion Loss of Doors
ASTM D3161/D3161M-19 Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)
ASTM D4990-97a Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing
ASTM E2964-21 Standard Test Method for Measurement of the Normalized Insertion Loss of Doors
ASTM E2964-19 Standard Test Method for Measurement of the Normalized Insertion Loss of Doors
ASTM D312-00 Standard Specification for Asphalt Used in Roofing
ASTM C1167-22 Standard Specification for Clay Roof Tiles
ASTM D3746/D3746M-85(2015)e1 Standard Test Method for Impact Resistance of Bituminous Roofing Systems
ASTM D3161/D3161M-16a Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)
ASTM D3746-85(1996)e1 Standard Test Method for Impact Resistance of Bituminous Roofing Systems
ASTM F2337-11 Standard Test Method for Treestand Fall Arrest System
ASTM D3746-85(2008) Standard Test Method for Impact Resistance of Bituminous Roofing Systems
ASTM E108-11 Standard Test Methods for Fire Tests of Roof Coverings
ASTM F1334-12 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
ASTM C1492-22 Standard Specification for Concrete Roof Tile
ASTM D312/D312M-15 Standard Specification for Asphalt Used in Roofing
ASTM D937-07(2019) Standard Test Method for Cone Penetration of Petrolatum
ASTM D312-00(2006) Standard Specification for Asphalt Used in Roofing
ASTM F1334-11 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
ASTM D865-11 Standard Test Method for Rubber Deterioration by Heating in Air (Test Tube Enclosure)
ASTM F1334-24 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
ASTM D454-04(2010) Standard Test Method for Rubber Deterioration by Heat and Air Pressure
ASTM D865-11(2018) Standard Test Method for Rubber Deterioration by Heating in Air (Test Tube Enclosure)
ASTM E1554/E1554M-13(2018) Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
ASTM D937-07(2012) Standard Test Method for Cone Penetration of Petrolatum
ASTM F1334-97 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
ASTM F2121-05 Standard Practice for Treestand Labels
ASTM C120/C120M-19 Standard Test Methods for Flexure Testing of Structural and Roofing Slate
ASTM F1334-08 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
ASTM F1334-14 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
ASTM D3441-05 Standard Test Method for Mechanical Cone Penetration Tests of Soil
ASTM D6225-98(2004) Standard Test Method for Granule Cover of Mineral Surfaced Roofing
ASTM D3161/D3161M-16 Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)
ASTM D1864/D1864M-89(2023) Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs
ASTM D5869-07 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
ASTM D5869/D5869M-07A(2018)e1 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
ASTM E1111-92(1996)e1 Standard Test Method for Measuring the Interzone Attenuation of Ceiling Systems
ASTM D6225/D6225M-98(2012)e1 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
ASTM D1865/D1865M-09(2023) Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs
ASTM E1264-14 Standard Classification for Acoustical Ceiling Products
ASTM F2863-11(2023) Standard Specification for Central Vacuum Hose Inlet Valve Socket Dimensions
ASTM D3161/D3161M-20 Standard Test Method for Wind Resistance of Steep Slope Roofing Products (Fan-Induced Method)

CZ-CSN

CSN ON 69 8126-1964 Suspended storage tank with floating roof. Specifications
CSN ON 69 8121-1964 Suspended storage tank with fixed roof. Specifications
CSN ON 56 3828-1963 Peak quality standards
CSN ON 42 7310-1962 Aluminum dome. Specifications
CSN ON 42 7311-1962 Stamped aluminum dome. Specifications

Society of Automotive Engineers (SAE)

SAE ARP694A-1991 AERIAL REFUELING LIGHTS - DESIGN CRITERIA
SAE ARP694-1963 AERIAL REFUELING LIGHTS - DESIGN CRITERIA
SAE ARP694D-2021 Aerial Refueling Lights - Design Criteria

The American Road & Transportation Builders Association

AASHTO T231-1997 Standard Method of Test for Capping Cylindrical Concrete Specimens Twentieth Edition; ASTM C 617-94
AASHTO T 273-1986 Standard Method of Test for Soil Suction
AASHTO T 231-2017 Standard Method of Test for Capping Cylindrical Concrete Specimens

SAE - SAE International

SAE ARP694C-2015 Aerial Refueling Lights - Design Criteria
SAE ARP694B-2004 Aerial Refueling Lights- Design Criteria
SAE ARP694A-1985 Aerial Refueling Lights- Design Criteria

British Standards Institution (BSI)

PD R217-015-2000 Pinnacles component information standard 1.2. PCIS tutorial
DD ENV 50247-1-1999 Pinnacles Component Information Standard 1.2. The PCIS tag library
PD R217-016-2000 Pinnacles component information standard 1.2. PCIS sample documents
ASTM E1388-24 Standard Practice for Static Headspace Sampling of Vapors from Fire Debris Samples
BS DD ENV 50247-1:1999 Pinnacles Component Information Standard 1.2. The PCIS tag library
BS EN 15841:2009 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition

ES-UNE

UNE 41811:2017 Criterio on roofing intervention.

Korean Agency for Technology and Standards (KATS)

KS F 2307-1987 Test method for standard penetration
KS F 2307-2022 Method for standard penetration test
KS F 2307-2017 Test method for standard penetration
KS F 2622-2023 Standard test method for performance evaluation of membrane roofing systems

Japanese Industrial Standards Committee (JISC)

JIS A 1219:2001 Method for standard penetration test
JIS Q 0064:1998 Guide for the inclusion of environmental aspects in product standards
JIS Q 0064:2014 Guide for addressing environmental issues in product standards
JIS A 1219:1995 Method for standard penetration test

TH-TISI

TIS 1052-1991 Standard for roof drains
TIS 449-1982 Standard for suspended ceiling steel grids

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE C57.12.40-2006 Standard Requirements for Secondary Network Transformers@ Subway and Vault Types (Liquid Immersed)

FI-SFS

SFS 2513-1970 VESIKATON KALTEVUUDET, STANDARDISOIDUT

SCC

CAN/ULC-S107-M87-1987 Standard Methods of Fire Tests of Roof Coverings
CAN/ULC-S107:2019 STANDARD METHODS OF FIRE TESTS OF ROOF COVERINGS
ULC-S107-M1980-1980 Standard Method of Test for Fire Resistance of Roof Covering Materials
CAN/ULC-S627-M90-1990 Standard for Space Heaters for Use with Solid Fuels
ULC 627-2021 Standard for Space Heaters for Use with Solid Fuels
ULC-S627-2000(R2016) Standard for Space Heaters for Use with Solid Fuels
ULC-S627-1993 Standard for Space Heaters for use with Solid Fuels
AENOR UNE-EN 14829:2008 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW
ULC-S126-M1982-1982 Standard Method of Test for Fire Spread Under Roof-Deck Assemblies
CAN/ULC-S126-M86-1986(R2000) Standard Method of Test for Fire Spread Under Roof-Deck Assemblies

American National Standards Institute （ANSI)

ANSI/SDI RD-2010 Standard for Steel Roof Deck

SE-SIS

SIS SS 03 15 55-1991 Signs — Fire compartments in roof spaces

Underwriter Laboratories of Canada (ULC)

CAN/ULC-S627-2021 STANDARD FOR SPACE HEATERS FOR USE WITH SOLID FUELS

Underwriters Laboratories (UL)

UL 790 BULLETIN-2002 UL Standard for Safety Standard Test Methods for Fire Tests of Roof Coverings
UL 790 BULLETIN-2000 UL Standard for Safety Standard Test Methods for Fire Tests of Roof Coverings
UL 1096-1988 UL Standard for Safety Electric Central Air Heating Equipment
UL 733 BULLETIN-2009 UL Standard for Safety Oil-Fired Air Heaters and Direct-Fired Heaters
UL 733 BULLETIN-2012 UL Standard for Safety Oil-Fired Air Heaters and Direct-Fired Heaters
UL 733 BULLETIN-2011 UL Standard for Safety Oil-Fired Air Heaters and Direct-Fired Heaters
UL 733 BULLETIN-2005 UL Standard for Safety Oil-Fired Air Heaters and Direct-Fired Heaters
UL 733 BULLETIN-2008 UL Standard for Safety Oil-Fired Air Heaters and Direct-Fired Heaters

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

TR 4618-2014 Aerospace series Aircraft internal air quality standards@ criteria and determination methods (Edition 1; Incorporated Corrigendum: 11/13/2014)

AT-ON

ONORM B 7219-2000 Roofing work - Process standard
ONORM E 4356 Teil.1-1972 Low voltage overhead-lines; ceramic lead-ins for roof-poles

GSO

OS GSO ASTM C406:2016 Standard Specification for Roofing Slate
OS GSO ASTM C1492:2012 Standard Specification for Concrete Roof Tile
GSO ASTM C1492:2012 Standard Specification for Concrete Roof Tile
BH GSO ASTM C1492:2013 Standard Specification for Concrete Roof Tile

Building Officials and Code Administrators International(U.S.)

BOCA CHAPTER 2 PROV NPC-1993 Materials and Joining Methods

NEMA - National Electrical Manufacturers Association

NEMA ERCS P1-2018 NEMA’s Electric Resistance Heating Technical Committee Primer on Codes and Standards

Canadian General Standards Board （CGSB)

CGSB 49.7-M78-CAN/CGSB AMD 2-1985 Canada Standard System for Sizing Infants' Apparel Incorporates Amd 1

European Committee for Standardization (CEN)

EN 15841:2009 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
EN ISO 24415-1:2009 Tips for assistive products for walking - Requirements and test methods - Part 1: Friction of tips

European Association of Aerospace Industries

AECMA PREN 3676-1993 Aerospace Series Inserts, Thin Wall Design Standard Edition P 1

National Fire Protection Association (NFPA)

NFPA 276-2011 Standard Method of Fire Test for Determining the Heat Release Rate of Roofing Assemblies with Combustible Above-Deck Roofing Components Effective Date: 07/22/2010

German Institute for Standardization

DIN EN 14829:2007-11 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW; German version EN 14829:2007
DIN EN 14829 Berichtigung 1:2010-07 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW; German version EN 14829:2007, Corrigendum to DIN EN 14829:2007-11

Insulated Cable Engineers Association （ICEA)

ICEA S-106-703-2006 STANDARD FOR BROADBAND AERIAL SERVICE WIRE AIRCORE, POLYOLEFIN INSULATED, COPPER CONDUCTORS TECHNICAL REQUIREMENTS

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 802.16-2012 IEEE Standard for Air Interface for Broadband Wireless Access Systems
IEEE Std 802.16-2017 IEEE Standard for Air Interface for Broadband Wireless Access Systems
IEEE P802.16/D3, July 2017 IEEE Draft Standard for Air Interface for Broadband Wireless Access Systems

Association Francaise de Normalisation

NF E31-501:1998 Domestic gas-fired forced convection air heaters for space heating not exceeding ? net heat input of 70 kW, without ? fan to assist transportation of combustion air and/or combustion products.

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN TR 4618-2014 Aerospace series Aircraft internal air quality standards, criteria and determination methods (Edition 1; Incorporated Corrigendum: 11/13/2014)

Lithuanian Standards Office

LST EN 3676-2001 Aerospace series - Inserts, thin wall, self-locking - Design standard
LST EN 4014-2005 Aerospace series - Inserts, thickwall, self-locking - Design standard

Danish Standards Foundation

DS/EN 4014:2005 Aerospace series - Inserts, thickwall, self-locking - Design standard

Others: