Three hole plug

Three hole plug, Total:101 items.

The international standard classification for "Three hole plug" includes: Dividing and tool-workpiece holding devices .

The Chinese standard classification for "Three hole plug" includes: Machine tool element , Mechanical gadgets and components , Combination grippers , Marine gate valves and plug cocks .

Professional Standard - Aviation

HB 2-7-1983 hole plugging
HB 2-7-1976 hole plugging
HB 360-1971 Oil hole plug
HB 1695-1987 Three Vertical Groove Side-hole Bearing
HB 2-7-1994 Block for Hole
HB 4535.41-1991 K Type Hole Series Combined Clamp Elements - Blockage
HB 360-1987 Oil Hole Plug

Professional Standard - Machinery

JB/T 9802-2014 Sprayer and Washing Machine - Plunger Pump and Piston Pump
JB/T 7384.16-1994 Fasteners Plug gauges for bore size of rivets
JB/ZQ 4214-2006 Protection plug for inner thread and unthreaded hole
JB/T 7384.17-1994 Fasteners Plug gauges for pore depth of rivets

Group Standards of the People's Republic of China

T/ZAII 050-2023 Precise feeding system with triplex plunger

Taiwan Provincial Standard of the People's Republic of China

CNS 11412-1995 Cut-out Cocks with Side Vent for Railway Rolling Stock
CNS 9169-1982 Thread Plug of Oil Drain Hole for Motor - Cycle
CNS 11408-1995 Three-way Cocks for Railway Rolling Stock

Professional Standard - Aerospace

QJ 3100.2A-2004 Thread plug gauges for thread hole of installation helical coil threaded inserts
QJ 3100.2-1999 Threaded plug gauge double-headed tapered handle plug gauge for installing wire screw sleeve screw hole
QJ 3100.1-1999 Threaded plug gauge integral plug gauge for screw hole installation of steel wire screw sleeve
QJ/Z 19-1984 Screw Hole Blank Inner Diameter Smooth Plug Gauge
QJ 428-1978 1:50 Cone Pin Hole Cone Plug Gauge (D=1~10)
QJ 3100.1A-2004 Thread plug gauges for thread hole of installation helical coil threaded inserts - Part 1:Single end plug gauges

Professional Standard - Agriculture

2400药典二部-2015 Part I Thirteen Seti Pai
2499药典二部-2020 Part 13 secnidazole
2397药典二部-2015 Part 13 secnidazole
2500药典二部-2020 Part I Thirteen Secnidazole Tablets
1976药典二部-2010 Part I Thirteen Seti Pai
2398药典二部-2015 Part I Thirteen Secnidazole Tablets
2502药典二部-2020 Part I Thirteen Seti Pai

National Metrological Verification Regulations of the People's Republic of China

JJG 59-1990 Standard Piston Gauge (Grade Ⅱ& Ⅲ)

未注明发布机构

DIN 12553 E:2019-08 Laboratory glassware - Double oblique bore stopcocks

Professional Standard - Farm Machinery

NJ 116-1975 Sprayer three-cylinder piston pump technical conditions

Professional Standard-Ships

CB 541-1967 Three-way cock for externally-threaded aluminum alloy filling

HU-MSZT

MNOSZ 375-1951 Macon stopper

Defense Logistics Agency

DLA MIL-J-5251 A NOTICE 3-1999 JACK U-82/U
DLA MIL-J-5251 A-1952 JACK U-82/U
DLA QPL-641-67-2005 JACKS, TELEPHONE, GENERAL SPECIFICATION FOR
DLA MIL-J-641 E SUPP 1-1983 JACKS, TELEPHONE, GENERAL SPECIFICATION FOR
DLA MIL-J-641/8 D NOTICE 3-2003 JACK, TELEPHONE, TYPE JJ-055
DLA MIL-J-641/7 C VALID NOTICE 1-1988 JACK, TELEPHONE TYPE JJ-048
DLA MIL-J-641 E (2)-2000 JACKS, TELEPHONE, GENERAL SPECIFICATION FOR
DLA MIL-J-641 E-1979 JACKS, TELEPHONE, GENERAL SPECIFICATION FOR

CZ-CSN

CSN 70 4184-1978 Stopcocks with double oblique bore
CSN ON 13 9154-1966 Three-way packing cock Jt10
CSN 13 6592-1973 Boring pipe boxes without blocking. Dimensions
CSN 70 4181-1978 One way glass stopcocks with, straight side bore
CSN 70 4188-1971 Glass stopcocks with non-interchangeable keys, T-bore

German Institute for Standardization

DIN 12555:1977 Laboratory glassware; double bore stopcocks with tail
DIN 42544:1991-05 Transformers; straight-way cocks, three-way cocks; requirements
DIN 42544:1991 Transformers; straight-way cocks, three-way cocks; requirements
DIN 12541-1:1977 Laboratory glassware; straight bore stopcocks
DIN 12541-1:1977-05 Laboratory glassware; straight bore stopcocks
DIN 2245-1:1989 GO and NOT GO plug gauges from 1 mm to 40 mm nominal diameter
DIN 12541:2023-12 Laboratory glassware - Straight bore stopcocks / Note: Date of issue 2023-11-17*Intended as replacement for DIN 12541-1 (1977-05).
DIN 12553:1977 Laboratory glassware; double oblique bore stopcocks
DIN 85339:2019-09 Hexagon head screw plugs - With retaining pin and bleeding hole
DIN 12553:2020-03 Laboratory glassware - Double oblique bore stopcocks
DIN 12563:2020-02 Laboratory glassware - V-bore stopcocks 120°
DIN 12554:2020-03 Laboratory glassware - T-bore stopcocks
DIN 12553:2023-12 Laboratory glassware - Double oblique bore stopcocks / Note: Date of issue 2023-11-17*Intended as replacement for DIN 12553 (2020-03).

SCC

BS 45:1928 Sparking plugs, sparking plug holes, taps for sparking plug holes and copper-asbestos washers for automobile engines
NS 6259:1984 Marine industry - Rubber plugs for holes in container sockets
DIN 85339:2019 Hexagon head screw plugs - With retaining pin and bleeding hole
DIN 12563:2020 Laboratory glassware - V-bore stopcocks 120Â°
DIN 12553:2020 Laboratory glassware - Double oblique bore stopcocks
DIN 12554:2020 Laboratory glassware - T-bore stopcocks

Military Standards (MIL-STD)

DOD A-A-53998-1989 DRILL, PIN HOLE, DENTAL
DOD A-A-54891-1993 PLUG, EAR, HEARING PROTECTION, TRIPLE FLANGE
DOD A-A-54746-1992 STOPCOCK, INTRAVENOUS THERAPY, 3-WAY, PLASTIC
DOD A-A-54713-1992 STOPCOCK, SURGICAL SYRINGE, THREE WAY, AYER

RO-ASRO

STAS 9282-1973 PLUCS FOR LCBRICATING HOLES Dimensions

(U.S.) Ford Automotive Standards

FORD WM 920-2009 GENERAL SPECIFICATION FOR PORT PLUG
FORD WM 200-2009 PLUG ?PORT, O-RING HEX RECESS

AR-IRAM

IRAM 2156-1960 Three-pole ground plug

TH-TISI

TIS 2384-2008 Three.way stopcock for medical use

Society of Automotive Engineers (SAE)

SAE ARP5862-2009 Shipping Caps, Covers and Plugs
SAE AS125851A-2006 PLUG - PIPE, STEEL, COUNTERSUNK HEX
SAE AS125851-1959 PLUG - PIPE, STEEL, COUNTERSUNK HEX
SAE AS4864A-2003 (R) FITTING, PLUG, PIPE, EXTERNAL THREAD, COUNTERSUNK HEX HEAD

Japanese Industrial Standards Committee (JISC)

JIS E 4105:1991 Three-way cocks for railway rolling stock
JIS D 4213:1982 Tire valve core housing and spuds for automobiles

AIA/NAS - Aerospace Industries Association of America Inc.

NAS834-1998 Cap or Plug - Protective@ Plain Tube or Hole

IT-UNI

UNI 2081-1942 Glass for chemical laboratories. Three-way open cock. Ordinary cock
UNI 2082-1942 Glass for chemical laboratories. Three-way open cock. capillary action cock
UNI 3296-1952 Flange cock for ships, heavy-duty series. Three-way cock, DN 100-125, PN 2.5

Association Francaise de Normalisation

NF E02-313:2010 Steel gauges - Morse taper ring gauges with tang.
NF E02-311:2010 Steel gauges - Morse taper plug gauges with tang
NF L46-056:1980 Wire gauze with triangular apertures and round wires.

RU-GOST R

GOST 12217-1966 Holding devices. Plugs for lubrication holes. Design
GOST 24733-1981 Single pole sockets and plugs with contact diameter 1,6 and 4,0 mm. Specifications

American National Standards Institute （ANSI)

ANSI/SAE J531-1994 Automotive Pipe Filler, and Drain Plugs
ANSI B93.3-1984 Cylinder Bore and Piston Rod Diameters - Inch Series

NL-NEN

NEN 2835-1971 Gauges - Plug gauges for holes, diameters 1 up to and including 40 mm
NEN 2810-1987 Gauges - Plug gauges for holes, diameters 1 up to and including 40 mm

ES-AENOR

UNE 22-350-1981 Close the plastic plug of the drilled hole. Static electricity test
UNE 58-419-1990 Forklift tire triangle table (with three fixing holes)