Electrical and electronic products, auto parts, electrical connectors and military equipment

Electrical and electronic products, auto parts, electrical connectors and military equipment, Total:366 items.

The international standard classification for "Electrical and electronic products, auto parts, electrical connectors and military equipment" includes: Environmental management , Electrical and electronic equipment , Electromechanical components for electronic and telecommunications equipment , Environmental testing .

The Chinese standard classification for "Electrical and electronic products, auto parts, electrical connectors and military equipment" includes: Basic standards and general methods , Electronic and electrical equipment , Technical management , Connector , Environmental Condition and General Test Method , Aircraft and its accessories in general , Urban traffic facility .

Taiwan Provincial Standard of the People's Republic of China

CNS 4737-1986 Methods of Test of Connectors for Electronic Equipment
CNS 4736-1986 General Rules of Connectors for Electronic Equipment
CNS 11301-1985 Glossary of Terms Relating to Electric Equipment for Automobiles (Electronic Device)

Group Standards of the People's Republic of China

T/LJQ 0007-2023 Technical Requirements of Type-C Connectors for Electronic Equipment
T/CSAE 160-2020 The technical specifications for remanufacturing of automotive components— Electrical power steering system
T/CSAE 63-2017 Electromagnetic compatibility test method and requirement of electrical components and subsystems (12V) of vehicle
T/CACE 067-2022 Technical specifications for echelon use components of waste electrical and electronic equipment
T/CSAE 256-2022 Technical specifications for remanufacturing of automotive components —Wiper motor

Professional Standard - Automobile

QC/T 1067.1-2017 Connector used in automobile wire harness and electrical device Part 1:Definition、test method and requirement
QC/T 1067.5-2023 Connector used in automobile wire harness and electrical device Part5：Type and dimension of device connector(socket)
QC/T 1067.4-2023 Connector used in automobile wire harness and electrical?device Part4：Type and dimension of device connector(plug)
QC/T 979-2014 Waterproof vent device for protecting automotive electrical and electronics equipment

未注明发布机构

DIN EN 61076-1:2019 Connectors for electronic equipment – Product requirements – Part 1: Generic specification

Anhui Provincial Standard of the People's Republic of China

DB34/T 2437-2015 Communication specification for connection between charging equipment in public areas and electric vehicles

工业和信息化部

QC/T 1067.2-2017 Connector used in automobile wire harness and electrical device -- Part 2: Type and dimension of the male terminal
QC/T 1067.3-2017 Connector used automobile wire harness and electrical device -- Part 3: Type, dimension and special requirement of the ring terminal

Professional Standard - Railway

TB/T 2768-1996 Reliability of Electronic Equipment Components, Programmable Electronic Equipment and Electronic Systems of Railway Locomotives
TB/T 3213-2009 General Technical Specification of Electric and Electronic Products - Used on Rolling Stock for Plateau
TB/T 3246.3-2010 Design Guide for Railway Vehicles and their Components Bolted Joints Part 3: Design - Electrical Application

Professional Standard - Electron

SJ 20894-2003 Packing material selection and application for electronic equipment components
SJ 20429-1994 The prefered matching values between communication electro-acoustic device and equipment

Military Standard of the People's Republic of China-General Armament Department

GJB/Z 62.3-1994 Military electrical connector series plug-in electronic component socket
GJB 4681-1995*GJBz 20253-1995 Specifications for the selection and inspection of electronic components for military radar and electronic countermeasures equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 4798.5-2007 Environmental conditions existing in the application of electric and electronic products—Section 5:Ground vehicle installations
GB/T 42207.5-2022 Connectors for electronic equipment—Product requierments—Rectangular connectors—Part 5: Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
GB/T 28672-2012 The technical specifications for remanufacturing of automotive components—Alternator
GB/T 4798.5-1987 Environmental conditions existing in the application of electric and electronic products--Ground vehicle installations

Professional Standard - Aviation

HB 7262.6-1995 Aviation Product Electric Fitting Process - Bonding Fixation of Electronic Devices
HB 7262.2-1995 Aviation Product Electric Fitting Process - Welding of Electronic Devices

Professional Standard - Urban Construction

CJ/T 3087-1999 Charge equipment for urban bus and trolley bus - Technical requirements of electronic toll collection equipment

Japanese Industrial Standards Committee (JISC)

JIS D 0103:2019 Automobile parts -- Glossary of devices and parts of electric equipment
JIS D 0103:1997 Automobile parts -- Devices and parts of electric equipment -- Nomenclature
JIS D 5202:1998 Automotive parts -- Distributors and ignition coils -- High-tension connections and low-tension connections
JIS C 5401-1:2015 Connectors for electronic equipment -- Product requirements -- Part 1: Generic specification
JIS C 5433:1976 Rectangular connectors for electronic equipment
JIS C 5401:1991 General rules of connectors for use in electronic equipment
JIS C 5432:1994 Type R01 cylindrical connectors for use in electronic equipment
JIS C 5101-14:1998 Fixed capacitors for use in electronic equipment Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
JIS C 5402:1992 Method for test of connectors for use in electronic equipment
JIS C 5401-1:2005 Connectors for electronic equipment -- Part 1: Generic specification

European Committee for Electrotechnical Standardization（CENELEC）

EN 50498:2010 Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles
EN 61076-2:2011 Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors
EN 61076-3:2008 Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification
EN IEC 61076-3-126:2023 Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5-way power connectors for industrial environments with push-pull locking
EN 61076-1:2006 Connectors for electronic equipment - Product requirements Part 1: Generic specification
EN 61076-3-001:2008 Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification
EN 61076-2-101:2008 Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
EN 61076-2-101:2012 Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
EN 50049-1:1997 Domestic and similar electronic equipment interconnection requirements: Peritelevision connector
EN IEC 61076-3-123:2019 Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull loc
EN 61076-3-118:2010 Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling
EN 61076-3-117:2009 Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7
EN 61076-2-105:2008 Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking
EN 61076-2-104:2008 Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking [: CENELEC EN 61076-2-101]

Korean Agency for Technology and Standards (KATS)

KS R 0019-2023 Automobile parts－Devices and parts of electric equipment－Nomenclature
KS C 6612-1992 Ball connectors for use in electronic equipment
KS C 6033-2004 General rules of connectors for use in electronic equipment
KS C 6033-2014 General rules of connectors for use in electronic equipment
KS C 6040-2004 Method for test of connectors for use in electronic equipment
KS C 6033-2019 General rules of connectors for use in electronic equipment
KS C 3380-2020 Measurement procedures of magnetic field levels generated by electronic and electrical equipment in the electric vehicle with respect to human exposure
KS C 5510-1996(2021) Type R01 cylindrical connectors for use in electronic equipment

KR-KS

KS R 0019-2008(2023) Automobile parts－Devices and parts of electric equipment－Nomenclature

British Standards Institution (BSI)

BS EN 61076-3:2008 Connectors for electronic equipment – Product requirements –– Part 3: Rectangular connectors – Sectional specification
BS EN 61076-1:2006+A1:2019 Connectors for electronic equipment. Product requirements. Generic specification
BS EN 61076-1:2006 Connectors for electronic equipment - Product requirements - Generic specification
BS EN 61076-3:2009 Connectors for electronic equipment - Product requirements - Rectangular connectors - Sectional specification
BS EN 61076-2:2011 Connectors for electronic equipment. Product requirements. Sectional specification for circular connectors
BS EN 61076-3-001:2008 Connectors for electronic equipment – Product requirements –– Part 3-001: Rectangular connectors — Blank detail specification
BS EN 61076-2-001:2011 Connectors for electronic equipment. Product requirements. Circular connectors. Blank detail specification
BS EN 61076-3:2008(2014) Connectors for electronic equipment – Product requirements Part 3 : Rectangular connectors – Sectional specification
PD IEC/PAS 61076-3-126:2018 Connectors for electrical and electronic equipment. Product requirements. Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking
BS EN 61076-2-105:2009 Connectors for electronic equipment - Product requirements - Circular connectors - Detail specification for M5 connectors with screw-locking
BS EN 61076-2-105:2008 Connectors for electronic equipment - Product requirements - Circular connectors - Detail specification for M5 connectors with screw-locking
BS EN 61076-2-101+A1:2004 Connectors for electronic equipment - Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications
BS EN 61076-2-101:2012 Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for M12 connectors with screw-locking
BS EN 61076-2-101:2010 Connectors for electronic equipment - Product requirements - Circular connectors - Detail specification for M12 connectors with screw-locking
BS EN IEC 61076-3-126:2023 Connectors for electrical and electronic equipment. Product requirements - Rectangular connectors. Detail specification for 5-way power connectors for industrial environments with push-pull locking
BS EN 50049-1:1998 Domestic and similar electronic equipment interconnection requirements. Peritelevision connector
BS PD IEC/PAS 61076-2-114:2016 Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for data and power connectors with M8 screw-locking
BS EN IEC 61076-3-123:2019 Connectors for electrical and electronic equipment. Product requirements - Rectangular connectors. Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull…
BS EN 61076-3-118:2010 Connectors for electronic equipment. Product requirements. Part 3-118: Rectangular connectors. Detail specification for a 4 pole + PE power connector with push-pull coupling
23/30483560 DC BS EN IEC 61076-2-111. Connectors for electrical and electronic equipment. Product requirements - Part 2-111. Circular connectors. Detail specification for power connectors with M12 screw-locking
PD IEC TR 63203-250-1:2021 Wearable electronic devices and technologies. Electronic textile. Snap fastener connectors between e-textiles and detachable electronic devices
22/30454420 DC BS EN 60092-378. Connectors for electronic equipment. Product requirements - Part 2. Sectional specification for circular connectors
24/30438356 DC BS EN IEC 61851-21-1 Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply
19/30371696 DC BS IEC 61076-3-126. Connectors for electrical and electronic equipment. Product requirements. Part 3-126. Rectangular connectors. Detail specification for 5way power connector for industrial environments with push-pull locking
BS EN 61076-4-116:2012 Connectors for electronic equipment. Product requirements. Printed board connectors. Detail specification for a high-speed two-part connector with integrated shielding function
PD IEC TS 62196-3-1:2020 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system
BS EN 50498:2010 Electromagnetic compatibility (EMC). Product family standard for aftermarket electronic equipment in vehicles
23/30470137 DC BS EN IEC 61076-2. Connectors for electronic equipment. Product requirements - Part 2. Sectional specification for circular connectors
24/30491442 DC BS EN IEC 61076-2 Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors
BS EN 60512-10-4:2003 Connectors for electronic equipment - Tests and measurements - Test 10d - Electrical overload (connectors)
BS EN 61076-3-120:2016 Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
BS EN 61076-3-106:2007 Connectors for electronic equipment - Product requirements - Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series inter
BS EN 61076-3-106:2006 Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7
BS EN 61076-2-107:2010 Connectors for electronic equipment. Product requirements. Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
BS EN IEC 61076-3-106:2023 Connectors for electrical and electronic equipment. Product requirements - Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the…
BS IEC 61076-8-103:2023 Connectors for electrical and electronic equipment. Product requirements. Power connectors. Detail specification for 2P+PE circular connectors with 20 A rated current and push-pull locking IP65/IP67 with metal housing
BS EN 61076-6:2004 Connectors for electronic equipment - Loose part contacts - Sectional specification
BS EN 3155-008:2005 Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, male, type A, crimp, class S. Product standard
BS EN 3155-005:2006 Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard

JSAE - Society of Automotive Engineers of Japan@ Inc.

JASO D805-2000 Automobile Parts-Glossary of Terms Relating to Electrical and Optical Connectors

International Electrotechnical Commission (IEC)

IEC 61076-2:2011 Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors
IEC 61076-1:2019 Amendment 1 - Connectors for electronic equipment - Product requirements - Part 1: Generic specification
IEC 61076-1:2006+AMD1:2019 CSV Connectors for electronic equipment - Product requirements - Part 1: Generic specification
IEC 61076-1:2006/AMD1:2019 Amendment 1 - Connectors for electronic equipment - Product requirements - Part 1: Generic specification
IEC 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
IEC PAS 61076-3-126:2018 Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5 pole power connectors for industrial environments with push-pull locking
IEC 61076-2-111:2017 Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
IEC 61076-3-001:2008 Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification
IEC 61076-3-126:2023 Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5-way power connectors for industrial environments with push-p
IEC 61076-2-105:2008 Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking
IEC 61076-4-116:2012/AMD1:2015 Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
IEC 61076-4-116:2012+AMD1:2015 CSV Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
IEC 61076-3-118:2010 Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling
IEC 60384-14:2013 Fixed capacitors for use in electronic equipment. Part 14: Sectional specification.Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
IEC 61076-4-116:2015 Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
IEC 61076-8-105:2023 Connectors for electrical and electronic equipment - Product requirements - Part 8-105: Power connectors – Detail specification for 2-pole snap locking rectangular power connectors with plastic housin
IEC 61076-4-116:2012 Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors: Detail specification for a high-speed two-part connector with integrated shielding function
IEC 61076-2-101/COR1:2010 Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
IEC PAS 61076-2-114:2016 Connectors for electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for data and power connectors with M8 screw-locking
IEC TR 63203-250-1:2021 Wearable electronic devices and technologies - Part 250-1: Electronic textile - Snap fastener connectors between e-textiles and detachable electronic devices
IEC TS 62196-3-1:2020 Plugs,socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be us
IEC 61076-2-101:2008 Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
IEC 61076-2-101:2012 Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
IEC 61076-3-106:2023 Connectors for electrical and electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorpora
IEC 61881-3:2012/AMD1:2013 Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 3: Electric double-layer capacitors
IEC 61881-3:2013 Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 3: Electric double-layer capacitors
IEC 61076-3:2008 Connectors for electronic equipment - Part 3: Rectangular connectors - Sectional specification
IEC 61076-2-107:2010 Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw-locking
IEC 61076-4-115:2003 Connectors for electronic equipment - Part 4-115: Printed board connectors; Backplane connector for InfiniBand equipment
IEC 61076-3-120:2016 Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
IEC PAS 61076-2-107:2007 Connectors for electric equipment - Product requirements - Part 2-107: Circular connectors - Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw-locking

GSO

BH GSO IEC 61076-1:2016 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
GSO IEC 61076-1:2014 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
GSO IEC 61076-1:2016 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
OS GSO IEC 61076-2:2014 Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors
BH GSO IEC 61076-3:2016 Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification
GSO IEC 61076-2:2014 Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors
GSO IEC 61076-3:2014 Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification
GSO IEC 61076-3-001:2014 Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification
OS GSO IEC 61076-2-001:2014 Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification
BH GSO IEC 61076-2-001:2016 Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification
GSO IEC 61076-2-001:2014 Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification
GSO IEC 61076-3-118:2017 Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling
GSO IEC 61076-2-101:2015 Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
OS GSO IEC 61076-3-118:2017 Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling
BH GSO IEC 61076-4-115:2016 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
OS GSO IEC 61076-4-115:2014 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
GSO IEC 61076-2-105:2014 Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking
OS GSO IEC 61076-2-105:2014 Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking
BH GSO IEC 61076-2-101:2016 Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
GSO IEC 60512-16-6:2013 Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations
GSO IEC 60512-17-1:2013 Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness

German Institute for Standardization

DIN EN 61076-3:2009 Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification (IEC 61076-3:2008); German version EN 61076-3:2008
DIN EN IEC 61076-8-102:2021 Connectors for electrical and electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A (I
DIN 72586:1984 Motor vehicles; cable connection strips for 24 V nominal voltage installations
DIN EN 61076-3:2009-07 Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification (IEC 61076-3:2008); German version EN 61076-3:2008 / Note: DIN EN 61076-3 (2000-10) remains valid alongside this standard until 2011-1...
DIN EN 61076-2-001:2012 Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification (IEC 61076-2-001:2011); German version EN 61076-2-001:2011
DIN EN 61076-3-001:2009-07 Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification (IEC 61076-3-001:2008); German version EN 61076-3-001:2008 / Note: DIN EN 61076-3-001 (2000-10) remains valid alongside this st...
DIN EN 61076-2-105:2009 Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking (IEC 61076-2-105:2008); German version EN 61076-2-105:2008
DIN EN IEC 61076-3-106:2019-12 Connectors for electrical and electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporatin...
DIN EN 61076-1:2019-10 Connectors for electronic equipment - Product requirements - Part 1: Generic specification (IEC 61076-1:2006 + A1:2019); German version EN 61076-1:2006 + A1:2019 / Note: DIN EN 61076-1 (2007-02) remains valid alongside this standard until 2022-02-15.*A...
DIN EN 61076-3-115:2011 Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments
DIN EN 61076-2-105:2009-05 Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking (IEC 61076-2-105:2008); German version EN 61076-2-105:2008
DIN EN 61076-4-115:2004-02 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment (IEC 61076-4-115:2003); German version EN 61076-4-115:2003
DIN CLC/TS 50502:2009 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and connection systems; German version CLC/TS 50502:2008
DIN EN 50498:2011 Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles; German version EN 50498:2010
DIN EN 50042:1982 Low voltage switchgear and controlgear for industrial use; terminal marking; terminals for external associated electronic circuit components and contacts
DIN EN 61076-1:2007 Connectors for electronic equipment - Product requirements - Part 1: Generic specification (IEC 61076-1:2006); German version EN 61076-1:2006
DIN EN 61076-3-106:2007 Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7
DIN EN IEC 61076-8-101:2021 Connectors for electrical and electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A (IE
DIN EN IEC 61076-8-100:2021 Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A (IE
DIN EN 61076-4-115:2004 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment (IEC 61076-4-115:2003); German version EN 61076-4-115:2003
DIN EN 61076-6:2004 Connectors for electronic equipment - Part 6: Loose part contacts - Sectional specification (IEC 61076-6:2004); German version EN 61076-6:2004
DIN EN 61076-6:2004-11 Connectors for electronic equipment - Part 6: Loose part contacts - Sectional specification (IEC 61076-6:2004); German version EN 61076-6:2004

SCC

DANSK DS/EN 61076-2:2011 Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors
DANSK DS/EN 61076-1/A1:2019 Connectors for electronic equipment – Product requirements – Part 1: Generic specification
CEI EN 61076-1/A1:2007 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
DANSK DS/EN 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
CEI EN 61076-1:2007 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
CEI EN 61076-3:2010 Connectors for electronic equipment - Product requirements Part 3: Rectangular connectors - Sectional specification
CEI EN 61076-2:2012 Connectors for electronic equipment - Product requirements Part 2: Sectional specification for circular connectors
DANSK DS/EN 61076-3:2008 Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification
BS PD IEC/PAS 61076-3-126:2018 Connectors for electrical and electronic equipment. Product requirements-Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking
09/30199993 DC BS EN 61076-2. Connectors for electronic equipment. Product requirements. Part 2. Circular connectors. Sectional specification
DANSK DS/EN IEC 61076-3-126:2023 Connectors for electrical and electronic equipment – Product requirements – Part 3-126: Rectangular connectors – Detail specification for 5-way power connectors for industrial environments with push-pull locking
CEI EN IEC 61076-3-126:2023 Connectors for electrical and electronic equipment - Product requirements Part 3-126: Rectangular connectors - Detail specification for 5-way power connectors for industrial environments with push-pull locking
DIN EN IEC 61076-3-106 E:2019 Draft Document - Connectors for electrical and electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environm...
CEI EN IEC 61076-2-111:2018 Connectors for electrical and electronic equipment - Product requirements Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
DANSK DS/EN 61076-3-001:2008 Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification
06/30154447 DC IEC 62449. Connectors for electronic equipment. Product requirements. Detail specification for SCA-2 (Single Connector Attach -2) unshielded connectors
DANSK DS/EN IEC 61076-2-111:2018 Connectors for electrical and electronic equipment – Product requirements – Part 2-111: Circular connectors – Detail specification for power connectors with M12 screw-locking
DANSK DS/EN IEC 61076-3-123:2019 Connectors for electrical and electronic equipment – Product requirements – Part 3-123: Rectangular connectors – Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull ...
CEI EN 61076-3-001:2010 Connectors for electronic equipment - Product requirements Part 3-001: Rectangular connectors - Blank detail specification
DANSK DS/EN 61076-2-001:2011 Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification
CEI EN 61076-2-001:2012 Connectors for electronic equipment - Product requirements Part 2-001: Circular connectors - Blank detail specification
DIN IEC /TR 63203-250-1:2023 Wearable electronic devices and technologies - Part 250-1: Electronic textile - Snap fastener connectors between e-textiles and detachable electronic devices (IEC TR 63203-250-1:2021)
DIN EN IEC 61076-3-126:2024 Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5-way power connectors for industrial environments with push-pull locking (IEC 61076-3-126:2023); German version E...
BS 4200-3:1979 Guide on the reliability of electronic equipment and parts used therein-Presentation of reliability data on electronic components (or parts)
CEI EN IEC 61076-2-012:2021 Connectors for electrical and electronic equipment - Product Requirements Part 2-012: Circular connectors - Detail specification for connectors with inner push-pull locking based on M12 connector interfaces according to IEC 61076-2-101, IEC 61076-2-109...
BS EN 61076-2-101:2008 Connectors for electronic equipment. Product requirements-Circular connectors. Detail specification for M12 connectors with screw-locking
DANSK DS/IEC TS 62196-3-1:2020 Plugs,socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system
DANSK DS/EN 61076-4-115:2003 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
10/30210450 DC BS EN 61076-4-116. Connectors for electronic equipment. Product requirements. Part 4-116. Printed board connectors: Detail specification for a high-speed two-part connector with integrated shielding function
CEI EN 61076-3-117:2010 Connectors for electronic equipment - Product requirements Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7...
CEI EN 61076-3-118:2011 Connectors for electronic equipment - Product requirements Part 3-118: Rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling
BS PD IEC TR 63203-250-1:2021 Wearable electronic devices and technologies-Electronic textile. Snap fastener connectors between e-textiles and detachable electronic devices
DANSK DS/EN 61076-3-118:2010 Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling
CEI EN 61851-21-1:2018 Electric vehicle conductive charging system Part 21-1: Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply
CEI EN 61076-4-115:2004 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
DANSK DS/IEC PAS 61076-2-114:2016 Connectors for electronic equipment – Product requirements – Part 2-114: Circular connectors – Detail specification for data and power connectors with M8 screw-locking
DIN EN IEC 61076-3-126 E:2020 Draft Document - Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5way power connector for industrial environments with push-pull locking (IEC 48B/2731/CD:2019); T...
CEI EN 61076-2-101:2013 Connectors for electronic equipment - Product requirements Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
DANSK DS/EN 61076-2-101:2012 Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
CEI EN IEC 61076-3-123:2020 Connectors for electrical and electronic equipment - Product requirements Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull lo...
DANSK DS/EN IEC 61076-3-106:2023 Connectors for electrical and electronic equipment – Product requirements – Part 3-106: Rectangular connectors – Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporatin...
DIN EN IEC 61076-2 E:2023 Draft Document - Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors (IEC 48B/2962/CD:2022); Text in German and English
DIN IEC 61076-2 E:2009 Draft Document - Connectors for electronic equipment - Product requirements - Part 2: Circular connectors - Sectional specification (IEC 48B/2001/CD:2009)
DANSK DS/EN 61076-2-105:2008 Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking
BS PD IEC TS 62196-3-1:2020 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles-Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system
08/30179153 DC BS EN 61076-3-118. Connectors for electronic equipment. Product requirements. Part 3-118. Rectangular connectors. Detail specification for a 4 poles + PE power connector with push-pull coupling
CEI EN 61076-2-105:2010 Connectors for electronic equipment - Product requirements Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking
09/30199997 DC BS EN 61076-2-001. Connectors for electronic equipment. Product requirements. Part 2-001. Circular connectors. Blank detail specification
CEI EN IEC 61076-3-106:2024 Connectors for electrical and electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating
DIN EN 61076-1/A1 E:2015 Draft Document - Connectors for electronic equipment - Product requirements - Part 1: Generic specification (IEC 48B/2394/CD:2014)
DIN EN IEC 61076-2-111:2018 Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking (IEC 61076-2-111:2017); German version EN IEC 61076-2-111:2018
CEI EN 61076-3-106:2007 Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603...
DANSK DS/EN 61076-3-117:2009 Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603...
DIN EN IEC 61076-2-012 E:2020 Draft Document - Connectors for electrical and electronic equipment - Product Requirements - Part 2-012: Circular connectors - Detail specification for connectors with inner push-pull locking based on M12 connector interfaces according to IEC 61076-2-1...
DIN EN 61076-3-123 E:2016 Draft Document - Connectors for electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pul...
10/30216372 DC BS EN 61076-2-101. Connectors for electronic equipment. Product requirements. Part 2-101. Circular connectors. Detail specification for m12 connectors with screw-locking
CEI EN 50049-1:1999 Domestic and similar electronic equipment interconnection requirements: Peritelevision connector
DIN IEC 61076-3-117 E:2007 Draft Document - Connectors for electronic equipment - Product Requirements - Part 3-117: Rectangular connectors: Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 1000 MHz for industrial environments incor...
DIN EN IEC 62196-6:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where p...
DIN EN 61076-2-111 E:2013 Draft Document - Connectors for electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with m12 screw-locking (IEC 48B/2323/CD:2012)

Association Francaise de Normalisation

NF C93-406-1-1*NF EN 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: generic specification
NF EN 15940+A1+AC:2019 Connectors for electronic equipment - Product requirements - Part 1: generic specification
NF EN 61076-1/A1:2019 Connectors for electronic equipment - Product requirements - Part 1: generic specification
NF EN 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: generic specification
NF EN 61076-6:2004 Connectors for electronic equipment - Part 6: Contact parts of electrical connectors - Interim specification
NF C93-406-2*NF EN 61076-2:2012 Connectors for electronic equipment - Product requirements - Part 2: sectional specification for circular connectors
NF C91-101*NF EN 50498:2011 Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles.
NF EN IEC 61076-3-123:2019 Connectors for electrical and electronic equipment - Product requirements - Part 3-123: rectangular connectors - Particular specification for hybrid connectors in industrial environments for power and...
NF C93-406-2-001*NF EN 61076-2-001:2012 Connectors for electronic equipment - Product requirements - Part 2-001 : circular connectors - Blank detail specification.
NF EN 61076-2:2012 Connectors for electronic equipment - Product requirements - Part 2: intermediate specification for circular connectors
NF EN 61076-3:2009 Connectors for electronic equipment - Product requirements - Part 3: rectangular connectors - Interim specification
NF EN IEC 61076-2-111:2018 Connectors for electrical and electronic equipment - Product requirements - Part 2-111: circular connectors - Particular specification for M12 screw power connectors
NF EN IEC 61076-3-126:2023 Connectors for electrical and electronic equipment - Product requirements - Part 3-126: rectangular connectors - Particular specification for 5-way power connectors intended for industrial environments with lock...
NF C93-406-3-001*NF EN 61076-3-001:2009 Connectors for electronic equipment - Product requirements - Part 3-001 : rectangular connectors - Blank detail specification
NF EN 61076-2-105:2009 Connectors for electronic equipment - Product requirements - Part 2-105: circular connectors - Particular specification for M5 screw connectors
NF C93-406-2-101:2009 Connectors for electronic equipment - Product requirements - Part 2-101 : circular connectors - Detail specification for M12 connectors with screw-locking.
NF EN 61076-2-001:2012 Connectors for electronic equipment - Product requirements - Part 2-001: circular connectors - Particular specification framework
NF EN 61076-3-001:2009 Connectors for electronic equipment - Product requirements - Part 3-001: rectangular connectors - Particular framework specification
NF C93-406-2-105*NF EN 61076-2-105:2009 Connectors for electronic equipment - Product requirements - Part 2-105 : circular connectors - Detail specification for M5 connectors with screw-locking
NF C93-406-2-111*NF EN IEC 61076-2-111:2018 Connectors for electrical and electronic equipment - Product requirements - Part 2-111 : circular connectors - Detail specification for power connectors with M12 screw-locking
NF EN 61076-2-101:2013 Connectors for electronic equipment - Product requirements - Part 2-101: circular connectors - Particular specification for M12 screw connectors
NF EN 61076-8-101:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-101: electrical connectors - Particular specification for 2-pole or 3-pole sealed shielded connectors for the transmission of power and...
NF EN IEC 61076-8-102:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-102: electrical connectors - Particular specification for 2-pole or 3-pole sealed shielded connectors for the transmission of power and...
NF EN 61076-8-100:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-100: electrical connectors - Particular specification for 2-pole or 3-pole waterproof shielded connectors for the transmission of power and...
UTE C93-422 L15U*UTE C93-422 L15:1985 ELECTRONIC COMPONENTS. CONNECTING DEVICES. CIRCULAR MULTIPOLE CONNECTORS. BOOK 15.
NF C93-406-3*NF EN 61076-3:2009 Connectors for electronic equipment - Product requirements - Part 3 : rectangular connectors - Sectional specification
NF EN IEC 61076-3-106:2023 Connectors for electrical and electronic equipment - Product requirements - Part 3-106: rectangular connectors - Particular specification for protective housings used with shielded and unshielded 8-way connectors ...
UTE C93-426U*UTE C93-426:1977 Electronic components. Connecting devices. Multipole rectangular connectors without shell.
NF C93-406-2-101*NF EN 61076-2-101:2013 Connectors for electronic equipment - Product requirements - Part 2-101 : circular connectors - Detail specification for M12 connectors with screw-locking
NF C93-112-14*NF EN 60384-14:2014 Fixed capacitors for use in electronic equipment - Part 14 : sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
NF EN 61076-4-115:2003 Connectors for electronic equipment - Part 4-115: connectors for printed boards - Backplane connector for InfiniBand equipment
NF C93-406-4-116*NF EN 61076-4-116:2012 Connectors for electronic equipment - Product requirements - Part 4-116 : printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
UTE C93-422 L14U*UTE C93-422 L14:1985 ELECTRONIC COMPONENTS - CONNECTING DEVICES - CIRCULAR MULTIPOLE CONNECTORS - BOOK 14
NF C93-406-3-118*NF EN 61076-3-118:2011 Connectors for electronic equipment - Product requirements - Part 3-118 : rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling
UTE C93-422/A1U*UTE C93-422/A1:1978 ELECTRONIC COMPONENTS. CONNECTING DEVICES. CIRCULAR MULTIPOLE CONNECTORS. DETAIL REQUIREMENTS.
UTE C93-422U*UTE C93-422:1977 Electronic components. Connecting devices. Circular multipole connectors. Detail requirements.
NF EN IEC 61076-2-012:2020 Connectors for electrical and electronic equipment - Product requirements - Part 2-012: circular connectors - Particular specification for connectors with push-pull internal locking based on interfaces...
NF C93-522:1982 Components for electronic equipment. Electrical wires for wrapped connexions. General requirements.
NF EN 61076-3-118:2011 Connectors for electronic equipment - Product requirements - Part 3-118: rectangular connectors - Particular specification for a 4-pole + PE power connector with push-pull coupling mechanism
NF EN 50498:2011 Electromagnetic Compatibility (EMC) - Product family standard for electronic equipment for the vehicle aftermarket and accessories market
NF C92-250*NF EN 50049-1:1998 Domestic and similar electronic equipment interconnection requirements : peritelevision connector.
NF C93-406-2-107*NF EN 61076-2-107:2011 Connectors for electronic equipment - Product requirements - Part 2-107 : detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
NF EN 61076-7-100:2006 Connectors for electronic equipment - Product requirements - Part 7-100: cable outlet accessories - Particular specification for a metric cable gland consisting of an integrated part of rectan connector covers...
NF R13-450:1992 Mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles.
NF EN IEC 61076-2-011:2021 Connectors for electrical and electronic equipment - Product requirements - Part 2-011: circular connectors - Particular specification for B12 bayonet mating connectors based on mating interfaces...
NF EN IEC 61076-2-010:2021 Connectors for electrical and electronic equipment - Product requirements - Part 2-010: circular connectors - Particular specification for connectors with external or internal push-pull locking mechanism...
NF C93-406-2-104:2009 Connectors for electronic equipment - Product requirements - Part 2-104 : circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking.
NF C93-406-2-104*NF EN 61076-2-104:2015 Connectors for electronic equipment - Product requirements - Part 2-104 : circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking
NF EN 61076-3-106:2007 Connectors for electronic equipment - Product requirements - Part 3-106: rectangular connectors - Particular specification for protective housings used with shielded and unshielded 8-way connectors for approximately...
NF C93-406-4-115*NF EN 61076-4-115:2003 Connectors for electronic equipment - Part 4-115 : printed board connectors - Backplane connector for Infiniband equipment
NF F67-001-4:1990 Railway rolling stock. Electronic and microprocessor equipment. Part 4 : components.
NF EN 61076-3-115:2011 Connectors for electronic equipment - Product requirements - Part 3-115: rectangular connectors - Particular specification for protective housings used with 8-way shielded and unshielded connectors for frequencies...
NF C93-406-3-115*NF EN 61076-3-115:2011 Connectors for electronic equipment - Product requirements - Part 3-115 : rectangular connectors - Detail specification protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments inc
NF EN 61076-3-120:2017 Connectors for electronic equipment - Product requirements - Part 3-120: rectangular connectors - Particular specification for removable snap-fit power connectors for a rated continuous voltage of 250 V and...
NF EN 61076-3-114:2010 Connectors for electronic equipment - Product requirements - Part 3-114: rectangular connectors - Particular specification for protective housings used with 8-way shielded and unshielded connectors for high frequency...
NF EN IEC 61076-2-114:2020 Connectors for electrical and electronic equipment - Product requirements - Part 2-114: circular connectors - Particular specification for connectors with M8 screw lock with power contacts and signal contact...
NF EN 61076-3-116:2009 Connectors for electronic equipment - Product requirements - Part 3-116: rectangular connectors - Particular specification for protective housings used with 8-way shielded and unshielded connectors for high frequency...
NF L53-201-014:2007 Aerospace series - Electrical contacts used in elements of connection - Part 014 : contacts, electrical, male, type A, crimp, class S - Product standard.
NF A82-110*NF EN ISO 5828:2001 Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics

ES-UNE

UNE-EN 61076-1:2006/A1:2019 Connectors for electronic equipment - Product requirements - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in April of 2019.)
UNE-EN 61076-1:2006 Connectors for electronic equipment - Product requirements -- Part 1: Generic specification (Endorsed by AENOR in May of 2008.)
UNE-EN 61076-2:2011 Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors (Endorsed by AENOR in November of 2011.)
UNE-EN 61076-3:2008 Connectors for electronic equipment - Product requirements -- Part 3: Rectangular connectors - Sectional specification (Endorsed by AENOR in February of 2009.)
UNE-EN IEC 61076-3-126:2023 Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5-way power connectors for industrial environments with push-pull locking (Endorsed by Asociación Española de No...
UNE-EN IEC 61076-2-111:2018 Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking (Endorsed by Asociación Española de Normalización in August of 2018.)
UNE-EN 61076-2-001:2011 Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification (Endorsed by AENOR in November of 2011.)
UNE-EN 61076-3-001:2008 Connectors for electronic equipment - Product requirements -- Part 3-001: Rectangular connectors - Blank detail specification (Endorsed by AENOR in February of 2009.)
UNE-EN IEC 61076-3-123:2019 Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull ...
EN IEC 61076-3-106:2023 Connectors for electrical and electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporatin...
UNE-EN IEC 61076-3-106:2023 Connectors for electrical and electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporatin...
UNE-EN 61076-3-118:2010 Connectors for electronic equipment - Product requirements -- Part 3-118: Rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling (Endorsed by AENOR in October of 2010.)
UNE-EN 61076-4-115:2003 Connectors for electronic equipment -- Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment (Endorsed by AENOR in December of 2003.)
UNE-EN 61076-2-105:2008 Connectors for electronic equipment - Product requirements -- Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking (Endorsed by AENOR in January of 2009.)
UNE-EN 61076-2-101:2012 Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking (Endorsed by AENOR in October of 2012.)
UNE-EN 61076-6:2004 Connectors for electronic equipment -- Part 6: Loose part contacts - Sectional specification (Endorsed by AENOR in June of 2004.)

Danish Standards Foundation

DS/EN 61076-1:2006 Connectors for electronic equipment – Product requirements – Part 1: Generic specification
DS/EN 61076-3:2009 Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification
DS/EN 61076-2:2011 Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors
DS/EN 61076-2-001:2011 Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification
DS/EN 61076-3-001:2009 Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification
DS/EN 50049-1/A1:1999 Domestic and similar electronic equipment interconnection requirements: Peritelevision connector
DS/EN 50049-1/Corr.:2001 Domestic and similar electronic equipment interconnection requirements: Peritelevision connector
DS/EN 50049-1:1998 Domestic and similar electronic equipment interconnection requirements: Peritelevision connector
DS/EN 50498:2010 Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles
DS/EN 61076-3-118:2010 Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling
DS/EN 61076-4-115:2003 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
DS/EN 61076-2-101:2012 Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
DS/EN 61076-2-105:2008 Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking

CENELEC - European Committee for Electrotechnical Standardization

EN 61076-1:1995 Connectors with Assessed Quality@ for Use in d.c.@ Low Frequency Analogue and in Digital High Speed Data Applications Part 1: Generic Specification (Incorporates Amendment A1: 1996)
EN 61076-2:1999 Connectors for Use in d.c. Low-Frequency Analogue and Digital High-Speed Data Applications - Part 2: Circular Connectors with Assessed Quality - Sectional Specification
EN IEC 61076-2-111:2018 Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
EN 61076-2-101:2003 Connectors for electronic equipment Part 2-101: Circular connectors Detail specification for circular connectors M8 with screw- or snap-locking@ M12 with screw-locking for low voltage applications
EN 61076-6:2004 Connectors for electronic equipment Part 6: Loose part contacts - Sectional specification

IN-BIS

IS 2081 Pt.1-1976 Specification for tapered terminal cable connectors for automotive batteries Part Ⅰ Brass type connectors
IS 3826 Pt.2-1970 Connector specifications for frequencies below 3 MHz Part Ⅱ Battery connectors for electronic equipment

HU-MSZT

MSZ 11029/11-1983 Electronic products and equipment. Electronic instrument inspection and mechanical strain
MSZ 11029/8-1983 electronic product. Testing process of electronic instruments Electronic instruments check connected solid components with lateral constant load

IEC - International Electrotechnical Commission

PAS 61076-3-126-2018 Connectors for electrical and electronic equipment – Product requirements – Part 3-126: Rectangular connectors – Detail specification for 5 pole power connectors for industrial environments with push-pull locking (Edition 1.0)

RU-GOST R

GOST 28279-1989 Electromagnetic compatibility of on-board radio equipment and electrical network in a vehicle. Limits and test methods
GOST R 51771-2001 Domestic radioelectronic equipment. Input and output parameters and types of connectors. Technical requirements
GOST 23592-1979 Mouting of electric and radioelectronic equipment and instruments. Technical requirements for hang electroradioelements
GOST 23592-1996 Electrical wiring of radio-electronic equipment and devices. General requirements for three-dimensional wiring of electronic and electrical devices

RO-ASRO

STAS 12298-1985 CONNECTORS FOR ELECTRONIC EQUIPMENTS AND SIMILAR AND CONNECTING ELEMENTS Terminology

Lithuanian Standards Office

LST EN 61076-1-2006 Connectors for electronic equipment - Product requirements -- Part 1: Generic specification (IEC 61076-1:2006)
LST EN 61076-2-2011 Connectors for electronic equipment - Product requirements -- Part 2: Sectional specification for circular connectors (IEC 61076-2:2011)
LST EN 61076-3-2009 Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification (IEC 61076-3:2008)
LST EN 50049-1+A1+AC-2001 Domestic and similar electronic equipment interconnection requirements: Peritelevision connector
LST EN 61076-4-115-2004 Connectors for electronic equipment. Part 4-115: Printed board connectors. Backplane connector for InfiniBand equipment
LST EN 50498-2010 Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles
LST EN 60384-14-2014 Fixed capacitors for use in electronic equipment -- Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (IEC 60384-14:2013)
LST EN 61076-3-001-2009 Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification (IEC 61076-3-001:2008)
LST EN 61076-2-001-2011 Connectors for electronic equipment - Product requirements -- Part 2-001: Circular connectors - Blank detail specification (IEC 61076-2-001:2011)
LST EN 61076-3-118-2010 Connectors for electronic equipment - Product requirements -- Part 3-118: Rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling (IEC 61076-3-118:2010)

YU-JUS

JUS N.P6.254-1984 Electrical equipment for road vehicles. Electrical connections betvveen towing vehicles and trailert with 24 V electrical eguipment. Type 24 S (Supplementary)
JUS N.P6.253-1984 Electrical equipment for road vehicles. Electrical connections between tovving vehicles and trailers with 24 V electrical eguipment. Type 24 N (Norma!)
JUS N.P6.252-1983 Electrical equipment for road vehicles. Electrical connections betvveen towing vehicles and trailers v/ith 6 at 12 V electrical eguipment Type 12 S (Supplementary)
JUS N.P6.250-1983 Electrical equipment of road vehicles. Electrical connection betwen towing vehicles and trailers. Tehnical conditions and tests
JUS N.P6.251-1983 Electrical eguipment of road vehicles. Electrical connections betvveen tovving vehicles and trailers with 6 at 12 V electrical eguipment Type 12 N (Normal)

AENOR

UNE-EN 50049-1:1999 DOMESTIC AND SIMILAR ELECTRONIC EQUIPMENT INTERCONNECTION REQUIREMENTS: PERITELEVISION CONNECTOR.
UNE-EN 50498:2011 Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles

AT-OVE/ON

OVE EN IEC 61076-3-123:2021 Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull loc

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0687-76-3-123-2016 Connectors for electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments@ for power supply and fibre optic data transmission@ with push-pull locking (IEC 48B/2
VDE 0750-32-1-2019 Wearable electronic devices and technologies - Part 250-1: Electronic Textile - Snap button connectors for e-textile wears and detachable electronic devices (IEC 124/42/CD:2018); Text in German and English

PL-PKN

PN T92600-03-1987 Components of electronic e?uipments R.F. coaxial connectors type N-50 Fundamental dimensions
PN T92600-04-1988 Components of electronic e?uipments R.F. coaxial connectors type N-50 Fundamental dimensions

Society of Automotive Engineers (SAE)

SAE J3105/1-2020 Electric Vehicle Power Transfer System Using Conductive Automated Connection Devices Infrastructure-Mounted Pantograph (Cross-Rail) Connection
SAE J3105/1-2023 Electric Vehicle Power Transfer System Using Conductive Automated Connection Devices Infrastructure-Mounted Pantograph (Cross-Rail) Connection

Standard Association of Australia （SAA）

AS 1852.581:1979 International electrotechnical vocabulary - Electromechanical components for electronic equipment

ECIA - Electronic Components Industry Association

IS-84-1992 Interim Detail Specification for 2.5 mm Two Part Connector for Use in Electronic Equipment

Others: