Flat extrusion test

Flat extrusion test, Total:153 items.

The international standard classification for "Flat extrusion test" includes: Concrete and concrete products , Fibre and particle boards , Bolts, screws, studs , Reinforced plastics , Animal husbandry and breeding , Moulding equipment .

The Chinese standard classification for "Flat extrusion test" includes: Concrete, aggregate, plaster and mortar , Combination grippers , General grippers , Artificial board , Basic standards and general methods , Fibre reinforced composites , Animal quarantine, veterinary and epidemic prevention , Brick and tile making equipment , Moulds , Low voltage apparatus in general .

Taiwan Provincial Standard of the People's Republic of China

CNS 11488-1986 Method of Test for Flat Crush of Corrugated Fiberboard
CNS 13120-1992 Method of Test for Smoothness of Paper and Paperboard (Bendtsen Tester)

Professional Standard - Construction Industry

JG/T 3023-1995 Test method of concrete compressive strength for extrution hollow cored slab

Professional Standard - Aviation

HB 2460-1989 Single-side flat clamp plate
HB 3963-1987 Flat Clamp Plate
HB 2461-1977 Double-sided flat plate
HB 7070-1994 Test method for extrusion strength of fiber reinforced plastic laminates
HB 2461-1989 Two-side flat pressue plate
HB 2460-1977 Single-sided flat plate
HB 1587-1987 Flat Clamp Plate
HB 1711-1987 Indented Flat Clamp
HB 1293-1987 Flat Clamp Plate
HB 8621-2021 Test method for extrusion/bypass response of polymer matrix composite laminates for aerospace applications

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34717-2017 Extruded particleboard

Professional Standard - Electricity

DL/T 5422-2009 Test code for extruded-curb concrete in the concrete-faced rockfill dam

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17999.3-1999 SPF chicken--Serum plate agglutination test
GB/T 3856-2005 Test method for compression properties of unidirectional fiber reinforced plastics
GB/T 7559-1987 FRP Laminates-test method for bearing strength by bolted joints
GB/T 7559-2005 method for bearing strength by bolted joints of fiber reinforced plastics laminates
GB/T 3856-1983 Test method for compression properties of unidirectional fiber reinforced plastics

Professional Standard - Building Materials

JC/T 969-2005 Wall-board extruder technical condition
JC/T 292-1981 Test method for flatness of flat glass

Professional Standard - Aerospace

QJ 879.3-1984 Plastic Extrusion Mould - Fixed Plate
QJ 874.7-1984 Plastic Extrusion Mould - Cavity Plate
QJ 874.5-1984 Plastic Extrusion Mold Cavity Plate
QJ 877.5-1984 Plastic Extrusion Mould - Base Plate
QJ 877.2-1984 Plastic Extrusion Mould - Base Plate
QJ 879.1-1984 Plastic Extrusion Mould - Fixed Plate
QJ 877.8-1984 Plastic Extrusion Mould - Base Plate
QJ 879.4-1984 Plastic Extrusion Mould - Fixed Plate
QJ 875.1-1984 Plastic Extrusion Mould - Fixed Plate
QJ 876.1-1984 Plastic Extrusion Mould - Gating Plate
QJ 875.3-1984 Plastic Extrusion Mould - Fixed Plate
QJ 874.6-1984 Plastic Extrusion Mould - Cavity Plate
QJ 878.2-1984 Plastic Extrusion Mould - Stripper Plate
QJ 875.5-1984 Plastic Extrusion Mould - Fixed Plate
QJ 874.8-1984 Plastic Extrusion Mould - Cavity Plate
QJ 875.2-1984 Plastic Extrusion Mould - Fixed Plate
QJ 876.2-1984 Plastic Extrusion Mould - Gating Plate
QJ 874.1-1984 Plastic Extrusion Mould - Cavity Plate
QJ 875.7-1984 Plastic Extrusion Mould - Fixed Plate
QJ 877.3-1984 Plastic Extrusion Mould - Base Plate
QJ 876.4-1984 Plastic Extrusion Mould - Gating Plate
QJ 874.4-1984 Plastic Extrusion Mould - Cavity Plate
QJ 877.10-1984 Plastic Extrusion Mould - Base Plate
QJ 877.9-1984 Plastic Extrusion Mould - Base Plate
QJ 876.3-1984 Plastic Extrusion Mould - Gating Plate
QJ 874.2-1984 Plastic Extrusion Mould - Cavity Plate
QJ 877.1-1984 Plastic Extrusion Mould - Base Plate
QJ 878.1-1984 Plastic Extrusion Mould - Stripper Plate
QJ 877.6-1984 Plastic Extrusion Mould - Base Plate
QJ 879.2-1984 Plastic Extrusion Mould - Fixed Plate
QJ 874.3-1984 Plastic Extrusion Mold Cavity Plate
QJ 875.4-1984 Plastic Extrusion Mould - Fixed Plate
QJ 877.4-1984 Plastic Extrusion Mould - Base Plate
QJ 875.6-1984 Plastic Extrusion Mould - Fixed Plate
QJ 875.8-1984 Plastic Extrusion Mould - Fixed Plate
QJ 875.9-1984 Plastic Extrusion Mould - Fixed Plate
QJ 877.7-1984 Plastic Extrusion Mould - Base Plate

Professional Standard - Forestry

LY/T 1613-2004 Extruded wood-plastic composites
LY/T 1856-2009 Extruded tubular particleboard

住房和城乡建设部

JG/T 520-2018 Test method for compressive strength of extrusion concrete

Professional Standard - Machinery

JB/T 8457-1996 General Requirements and Test Method for Impact Extrusion Press Pinchers

RU-GOST R

GOST 20681-1975 Corrugated board. Method for determining the resistance to flat compression ( Flat crush test)
GOST 10510-1980 Metals. Erikson test method for sheets and strips extrusion
GOST 4651-1982 Plastics. Compression test method
GOST 20682-1975 Paper for corrugation. Method for determining the resistance of corrugated paper to flat compression (Concoro Medium Test)

AT-ON

ONORM S 1411-1975 Textile floor coverings; dynamic squeeze-test
ONORM B 5204-1973 Organic floor coverings; Indentation test with a plane indenter

SE-SIS

SIS SS 84 30 07-1984 Corrugated fibreboard — Determination of flat crush resistance — Flat crush test (FCT)
SIS SS-ISO 8977:1989 Tools for pressing — Round matrixes
SIS 12 31 63-1959 Flat materials. Extruded aluminum and aluminum alloys

RO-ASRO

STAS 11470-1989 EXTRUDED FLAT PLATES OF AGRYLONITRILEBUTADIENESTYRENIG COPOLYMER
STAS 12024-1981 POLYVINYL CHLORIDE FLAT EXTRUDED BOARDS
STAS 7737-1990 Tests of metals. Sheets and plates reverse bend test

SCC

NS 3280:1987 Particle boards - Test methods - Compression strength parallel to the plane of the board
NS-EN 14755:2005 Extruded particleboards — Specifications
AENOR UNE-EN 14755:2006 Extruded particleboards - Specifications
DANSK DS/EN 14755:2005 Extruded particleboards - Specifications
AENOR UNE 7391:1975 LAND LOADING TEST WITH PLATE
BS 4203:1967 Extruded rigid PVC corrugated sheeting
HOLDEN HN 1192-2009 EXTRUDED PVC BASE WITH BRIGHT ALUMINISED LAMINATE
NS 3276:1987 Particle boards - Test methods - Shear strength parallel to the plane of the board
AS 1859:1976 Flat pressed particleboard
AS 1859:1980 Flat pressed particleboard
AS 1301.P429TS:1973 Methods of test for pulp and paper - Flat crush resistance of corrugated board

TR-TSE

TS 3482-1980 PARTICLE BOARDS (EXTRUDED BOARDS)
TS 3462-1980 PARTICLE BOARDS (VENEERED FLATPRESSED)

Danish Standards Foundation

DS 2359:1992 Surface plates. Cast iron surface plates. Requirements. Testing
DS 2358:1992 Surface plates. Granite surface plates. Requirements. Testing
DS/EN 14755:2005 Extruded particleboards - Specifications
DS/EN ISO 14632:1999 Extruded sheets of polyethylen (PE-HD) - Requirements and test methods.

IT-UNI

UNI 7073-1972 Shock-resistant polystyrene extruded sheet. Types, regulations and tests
UNI 5468-1965 Mechanical testing of metal materials. Steel pipe extrusion test
UNI EN ISO 14632:2021 Extruded sheets of polyethylene (PE-HD) - Requirements and test methods

International Organization for Standardization (ISO)

ISO 15013:2022 Plastics — Extruded sheets of polypropylene (PP) — Requirements and test methods
ISO 11093-9:2019 Paper and board — Testing of cores — Part 9: Determination of flat crush resistance
ISO 3719:1982 Balancing machines; Symbols for front panels Trilingual edition

BE-NBN

NBN B 15-228-1976 Concrete test. extrusion
NBN A 11-202-1977 Iron and steel metallurgical products. High temperature extrusion test

Japanese Industrial Standards Committee (JISC)

JIS A 5441:2023 Extruded cement panel
JIS Z 0403-1:1999 Corrugated fibreboard -- Part 1: Determination of flat crush resistance

TH-TISI

TIS 877-2004 Extruded particlebo ards
TIS 876-2004 Flat pressed particleboards

PT-IPQ

NP 1367-1976 copper. Square extruded plywood nails. Relevant dimensions and durability

German Institute for Standardization

DIN 68764-2:1974-09 Extraded boards for the building; laminated extruded boards for the building in boards
DIN EN ISO 14632:1999 Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:1998); German version EN ISO 14632:1998
DIN EN 14755:2006-01 Extruded particleboards - Specifications; German version EN 14755:2005
DIN EN 14755:2006 Extruded particleboards - Specifications; English version of DIN EN 14755:2006
DIN 68764-1:1973 Particle boards; extruded boards for the building, terms, properties, testing, supervision
DIN 876-2:1984 Surface plates; cast iron surface plates, requirements and testing
DIN 52366:1996 Particle boards - Determination of internal bond of layers of extruded boards

European Committee for Standardization (CEN)

EN ISO 15013:2022 Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2022)
EN ISO 15013:2007 Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods
EN 14755:2005 Extruded particleboards - Specifications
EN 594:1995 Timber Structures - Test Methods - Racking Strength and Stiffness of Timber Frame Wall Panels

Association Francaise de Normalisation

NF T54-407:2007 Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods.
NF EN 14755:2006 Extruded particleboard – Requirements
NF B54-116*NF EN 14755:2006 Extruded particleboards - Specifications
NF EN 12697-33/IN1:2022 Bituminous mixtures - Test methods - Part 33: Preparation of test bodies using a plate compactor
NF EN 12697-33+A1:2022 Bituminous mixtures - Test methods - Part 33: Preparation of test bodies using a plate compactor

British Standards Institution (BSI)

BS EN ISO 15013:2007 Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods
BS EN 14755:2005 Extruded particleboards - Specifications
BS ISO 1268-6:2002 Fibre-reinforced plastics - Methods of producing test plates - Pultrusion moulding
BS EN 594:2011 Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels
BS EN 13409:2002 Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time

Korean Agency for Technology and Standards (KATS)

KS F 4735-2011(2021) Extrusion concrete panels
KS F 4735-2022 Extrusion concrete panels
KS F 4735-2011(2016) Extrusion concrete panels
KS C 2134-1996(2021) Testing method for dissipation factor and permittivity parallel with laminations of laminated sheet and plate materials
KS M ISO 11093-9:2018 Paper and board — Testing of cores — Part 9: Determination of flat crush resistance
KS I 3318-2016 Recycled plastics extruded lightweight panel
KS I 3318-2014 Recycled plastics extruded lightweight panel

United States Navy

NAVY MS20001 REV L-1989 HINGE, BUTT, STRUCTURAL, EXTRUDED

Lithuanian Standards Office

LST EN 14755-2005 Extruded particleboards - Specifications

AENOR

UNE-EN 14755:2006 Extruded particleboards - Specifications

ZA-SANS

SANS 6223:1993 The Izod impact test for metallic materials

VN-TCVN

TCVN 5819-1994 Extruded rigid PVC corrugated sheeting

SAE - SAE International

SAE J374-2015 Vehicle Roof Strength Test Procedure
SAE J374-1968 PASSENGER CAR ROOF CRUSH TEST PROCEDURE
SAE J374-1997 Vehicle Roof Strength Test Procedure
SAE J374-1991 Vehicle Roof Strength Test Procedure@ Recommended Practice

Society of Automotive Engineers (SAE)

SAE J374A-1974 PASSENGER CAR ROOF CRUSH TEST PROCEDURE

Indonesia Standards

SNI 08-7180-2006 Test methods of flame resistance on carpets - Tablet tests

CZ-CSN

CSN 50 0350-1985 Paper and paperboard testina. Concora liner test

CH-SNV

SN 213 306-1985 Slotted and crossrecessed raised cheese head screws

CEN - European Committee for Standardization

EN 594:2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels

KR-KS

KS M ISO 11093-9-2018 Paper and board — Testing of cores — Part 9: Determination of flat crush resistance

PL-PKN

PN M66319-1992 Press tools. Polyurethane springs plates

American National Standards Institute （ANSI)

ANSI/BIFMA X5.6-2010 Office Furnishings Panel Systems - Tests

American Society for Testing and Materials (ASTM)

ASTM D669-92(2002) Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials
ASTM D669-92(1997) Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials

(U.S.) Ford Automotive Standards

FORD FLTM BA 115-01-2013 FLOW DRILL SCREW SCHEDULE DEVELOPMENT ACCEPTANCE TEST FOR ALUMINUM, LOW CARBON STEEL SHEET AND EXTRUSIONS

Others: Flat three-point bending test piece,Standard test method for impact resistance of flat rigid plastic specimens by the drop drop method,Flat plate bending fatigue test,Test method for flat plate thermal conductivity meter,test plate,Composite Extrusion Test,flat extrusion,Dynamic extrusion test