Online physical property calculation

Online physical property calculation, Total:384 items.

The international standard classification for "Online physical property calculation" includes: Radiographic equipment , Wires , Natural gas , Transport by rail , Microprocessor systems , Other standards related to company organization and management , Geology. Meteorology. Hydrology , Aircraft and space vehicles in general .

The Chinese standard classification for "Online physical property calculation" includes: Medical radiographic equipment , Bare wire , Natural gas , Railway transport in general , System equipment interface , Commerce, Trade and Contract , Basic standards and general methods for chemical additive , Meteorology , Computer application .

Professional Standard - Electricity

DL/T 262-2012 On-line calculation guide for coal consumption of generating units

Professional Standard - Machinery

JB/T 5846-1991 Guidelines for Calculation of Characteristic Curves of Thyristors

Hebei Provincial Standard of the People's Republic of China

DB13/T 5795-2023 Pollutant online automatic monitoring (monitoring) Internet of Things gateway technology algorithm
DB13/T 5796-2023 Pollutant online automatic monitoring (monitoring) terminal side technology algorithm

Professional Standard - Medicine

YY/T 1821-2022 Methods for calculating size specific dose estimates for computed tomography

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/Z 35474-2017 Natural gas -Technical explanation for calculation of physical properties from composition
GB/T 20523-2006 Composition and calculation of enterprise logistics cost
GB/T 17747.3-2011 Natural gas—Calculation of compression factor—Part 3:Calculation using physical properties
GB/T 15275-1994 Standard for an 8-bit microcomputer bus system: STD bus
GB/T 17747.3-1999 Natural gas--Calculation of compression factor--Part 3:Calculation using physical properties
GB/T 15567-1995 Calculation of value of inertial forces of goods in railway transportation
GB/T 36551-2018 Calculation methods for properties of concentric lay overhead electrical stranded conductors

Guangdong Provincial Standard of the People's Republic of China

DB4401/T 175-2022 On-line test method for metering characteristics of water intake metering system
DB44/T 935-2011 Industrial Computed Radiography Inspection

Group Standards of the People's Republic of China

T/CIMA 0045-2023 Water quality biological toxicity online monitor
T/CSBME 034-2021 Specification for reliability design of X-ray Computed Tomography (CT) system
T/SXAEPI 21-2024 Specifications for online monitoring device of volatile organic compounds in water
T/SDPEA 0014-2019 Guide for Increased Power Supply Calculation of Transform Line Capacity Improvement
T/SDPEA 14-2019 Guide for Increased Power Supply Calculation of Transform Line Capacity Improvement
T/SHXCL 000001-2019 Modified poly(lacticacid) materials—Calculation of biobased content
T/CMA HG110-2023 Calibration Method for On-Line Turbidimeters
T/CI 173-2023 Operating characteristics calculation method of linear induction machine in rail transit
T/SHDSGY 060-2023 VOCs volatile organic compounds on-line monitoring system

未注明发布机构

VDI 3782 Blatt 3-2022 Dispersion of air pollutants in the atmosphere Determination of plume rise
GJB/Z 178-2015 Submarine seakeeping calculation method
DIN 25478 E:2020-11 Application of computer codes for the assessment of criticality safety
SAE J2597-201709 Computer Generated Shot Peening Saturation Curves
DIN EN ISO 13790 E:1999-08 Thermal Performance of Buildings Calculation of Heating Energy Requirements (Draft)
DIN 25478 E:2013-08 Application of computer codes for the assessment of criticality safety
DIN EN ISO 13790 E:2005-07 Thermal Performance of Buildings Calculation of Heating Energy Requirements (Draft)
ITU-T HDBK VOL III CIC Conductivity, Capacitance and Inductance: Physical Theory and Computational Methods Volume 3
ISO/IEC TR 30164:2020 Internet of things (IoT) — Edge computing

Professional Standard - Petrochemical Industry

SH/T 0572-1993 Calculation method for catalyst pore size distribution (nitrogen desorption constant temperature line calculation method)

National Metrological Technical Specifications of the People's Republic of China

JJF 1547-2015 Calibration Specification for On-line pH Meters
JJF(航空) 009-1983 Calculation method of main static performance index of linear pressure sensor

Professional Standard - Railway

TB/T 3181-2007 Calculation of Value of Inertial Forces of Goods in Railway Transportation
TB/T 3181-2014 Calculation of values of inertial force of goods in railway transportation

Professional Standard - Energy

NB/T 10977-2022 Code for design of on-line monitoring of transmission lines

Taiwan Provincial Standard of the People's Republic of China

CNS 14717-2003 Method for calculation of certain physical properties of liquefied petroleum (LP) gases from compositional analysis

工业和信息化部/国家能源局

JB/T 12963-2016 On-line gas chromatograph for VOCs in air
JB/T 12965-2016 On-line gas chromatograph for VOCs in water

Sichuan Provincial Standard of the People's Republic of China

DB51/T 1453-2012 Computer wire and cable technical specification

Military Standard of the People's Republic of China-General Armament Department

GJB 2354-1995 Sixteen-bit airborne computer internal bus
GJB/Z 205-2001 Submarine maneuverability design calculation method

Professional Standard-Ships

CB/Z 250-1988 Calculation Method for Submarine Manoeuvrability

National Metrological Verification Regulations of the People's Republic of China

JJG 370-2019 On-line Oscillation Tube Liquid Density Meters

中国气象局

QX/T 528-2019 Specifications for climatic feasibility demonstration-Meteorological parameter statistics for anti-icing design of overhead transmission line

Professional Standard - Aerospace

QJ 2898-1997 Code for Reliability Design of Space Computer

Professional Standard - Aviation

HB 7692-2001 The bus line inside 32 airborne computers

CZ-CSN

CSN 06 0210-1999 Calculate the heat loss of a building under central heating
CSN 72 7006-1974 Calculation of thermal losses at de- signing of thermal insulations
CSN 06 0215-1961 Calculation of infrared radiator heating
CSN 73 4055-1962 Calculation of the space enclosed by buildings
CSN 73 0549-1977 Thermo-teehníeal properties of engineer- ing structures and buildings. Methods of caloulation.
CSN ON 73 6504-1963 Hydraulic calculations of hydraulic structures
CSN 01 4218-1966 Elastic cylindrical out-of-line pressure connections. Calculation

British Standards Institution (BSI)

BS EN ISO 12213-3:2009 Natural gas - Calculation of compression factor - Calculation using physical properties
BS ISO 12213-3:1998 Natural gas - Calculation of compression factors - Calculation using measured physical properties
BS EN ISO 23196:2023 Water quality. Calculation of biological equivalence (BEQ) concentrations
BS IEC 61865:2002 Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation
BS ISO 23196:2022 Water quality. Calculation of biological equivalence (BEQ) concentrations
BS IEC 61865:2001 Overhead lines. Calculation of the electrical component of distance between live parts and obstacles. Method of calculation
BS EN 13631-15:2005 Explosives for civil uses - High explosives - Calculation of thermodynamic properties
BS EN 13632:2003 Methods of test for petroleum and its products - BS 2000-518:Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen
20/30399849 DC BS ISO 23152. Ultraviolet ballast water management systems. Computational physical modelling and calculations on scaling of ultraviolet reactors
BS EN ISO 13786:2007 Thermal performance of building components - Dynamic thermal characteristics - Calculation methods
BS EN ISO 13786:2008 Thermal performance of building components. Dynamic thermal characteristics. Calculation methods
PD ISO/IEC TR 30164:2020 Internet of things (IoT). Edge computing
21/30413954 DC BS ISO 23196. Water quality. Calculation of biological equivalence (BEQ) concentrations
BS ISO 23152:2021 Ships and marine technology. Ballast water management systems (BWMS). Computational physical modelling and calculations on scaling of UV reactors
BS ISO 13612-2:2014 Heating and cooling systems in buildings. Method for calculation of the system performance and system design for heat pump systems. Energy calculation
BS EN 13201-3:2003 Road lighting — Part 3: Calculation of performance
BS PD ISO/TR 29922:2017 Natural gas. Supporting information on the calculation of physical properties according to ISO 6976
PD ISO/TR 29922:2017 Natural gas. Supporting information on the calculation of physical properties according to ISO 6976
BS ISO 18292:2011 Energy performance of fenestration systems for residential buildings. Calculation procedure
BS DD IEC TS 60695-7-51:2002 Fire hazard testing - Toxicity of fire effluent - Estimation of toxic potency - Calculation and interpretation of test results
BS EN 13201-3:2015 Road lighting. Calculation of performance
PD ISO/TS 20460:2015 Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges
BS EN ISO 13370:2008 Thermal performance of buildings. Heat transfer via the ground. Calculation methods
BS EN ISO 13370:2007 Thermal performance of buildings - Heat transfer via the ground - Calculation methods
BS EN ISO 13370:2017 Thermal performance of buildings. Heat transfer via the ground. Calculation methods

IETF - Internet Engineering Task Force

RFC 6277-2011 Online Certificate Status Protocol Algorithm Agility

Danish Standards Foundation

DS 1123:1988 Installation in buildings. Calculation of installation space for air ducts
DS/EN ISO 12213-3:2009 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties
DS/IEC 61865:2001 Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation
DS/INF 418-1:2013 Calculation of heat loss from buildings - Part 1: Calculation of thermal bridges using detailed computer programmes
DS/ISO 23152:2021 Ships and marine technology – Ballast water management systems (BWMS) – Computational physical modelling and calculations on scaling of UV reactors
DS/EN 15934:2012 Sludge, treated biowaste, soil and waste - Calculation of dry matter fraction after determination of dry residue or water content
DS 418:2011 Calculation of heat loss from buildings
DS/EN ISO 13370:2008 Thermal performance of buildings - Heat transfer via the ground - Calculation methods

SCC

BS EN ISO 12213-3:2005 Natural gas. Calculation of compression factor-Calculation using physical properties
DANSK DS/EN ISO 12213-3:2009 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties
ETSI GR MEC 017-2018 Mobile Edge Computing (MEC); Deployment of Mobile Edge Computing in an NFV environment
BS ISO 12213-3:1997 Natural gas. Calculation of compression factors. Calculation using measured physical properties
DANSK DS/IEC 61865:2001 Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation
AWWA CSC95033 The Role of Computers in the Design of Disinfection Systems
AWWA CSC91093 The Need for Integration of Personal Computers in Your Water SCADA System
CIE D008-1995 Computer program to calculate CRIs ( to Publ. 13.3)
BS EN ISO 13370:1998 Thermal performance of buildings. Heat transfer via the ground. Calculation methods
BS EN ISO 13790:2004 Thermal performance of buildings. Calculation of energy use for space heating
VDI 3782 BLATT 3-1985 Spread of air pollutants in the atmosphere; calculation of the exhaust plume elevation
AWWA QTC97094 On-Line Particle Counter Calibration and Performance Verification
CAN 3-S304-M84-1984 Calculation of masonry for buildings
VDI 3820-2006 Consideration of the use of IT in calculation methods in building services engineering
NS-EN ISO 12213-3:2005 Natural gas — Calculation of compression factor — Part 3: Calculation using physical properties (ISO 12213-3:1997)
AENOR UNE-EN ISO 12213-3:2010 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006)
UNE-EN ISO 12213-3:2005 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:1997)
NS-EN ISO 12213-3:2009 Natural gas — Calculation of compression factor — Part 3: Calculation using physical properties (ISO 12213-3:2006)
ISO 12213-3:1997/DAmd 1 Natural gas — Calculation of compression factor — Part 3: Calculation using physical properties — Amendment 1
BS PD ISO/IEC TR 30164:2020 Internet of things (IoT). Edge computing
DANSK DS/ISO/IEC TR 30164:2020 Internet of Things (IoT) – Edge computing
AWWA WQTC62575 Development of an Online UV Dosimeter
NS-EN 832:1998 Thermal performance of buildings — Calculation of energy use for heating — Residential buildings
DANSK DS/ISO 23152:2021 Ships and marine technology – Ballast water management systems (BWMS) – Computational physical modelling and calculations on scaling of UV reactors
CAN/CSA-B78.5-M87-1987 Computer-Aided Design Drafting (Buildings)
CSA B78.5-1993(R2002) Computer-Aided Design Drafting (Buildings)
05/30134442 DC ISO/DIS 13370. Thermal performance of buildings. Heat transfer via the ground. Calculation methods
NS-EN ISO 13790:2004 Thermal performance of buildings — Calculation of energy use for space heating (ISO 13790:2004)
VDI 2693 BLATT 1-1996 Investment calculation in material flow planning using static and dynamic calculation methods
CSA S16-2009 Règles de calcul des charpentes en acier
NS-EN ISO 13370:1998 Thermal performance of buildings — Heat transfer via the ground — Calculation method (ISO 13370:1998)
DIN EN ISO 12213-3 E:2009 Draft Document - Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006); German version prEN ISO 12213-3:2009
DIN 4084 Supplement 1:2012 Ground - Calculation of the overall stability - Supplement 1: Examples of calculation
ANS 5.4-1982 Method for Calculating the Fractional Release of Volatile Fission Products from Oxide Fuel
ANS 5.4-2011(R2020) Method for Calculating the Fractional Release of Volatile Fission Products from Oxide Fuel
AWWA IMTECH51454 Wireless Computing for Field Crews
AWWA JTMGT64440 Process Trumps Product in Calculating Impact Fees
AWWA CSC92008 The Use of Computer-Interfaced SCADA for Water Distribution
DANSK DS/IEC TR 61597:2021 Overhead electrical conductors – Calculation methods for stranded bare conductors
AENOR UNE-EN ISO 13370:2010 Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:2007)
UNE-EN ISO 13370:2010 Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:2007)
BS EN ISO 13789:1999 Thermal performance of buildings. Transmission heat loss coefficient. Calculation method
CAN 3-A23.3-M84-1984 Calculation of concrete works in buildings
VDI 2693 BLATT 2-1996 Investment calculation for material flow planning using static and dynamic calculation methods — form
VDI 4492-2006 Application of inventory procedures in computer-managed warehouses
BS PD ISO/TS 20460:2015 Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges
DANSK DS/EN 16627:2015 Sustainability of construction works - Assessment of economic performance of buildings - Calculation methods
NS-EN 16627:2015 Sustainability of construction works - Assessment of economic performance of buildings - Calculation methods
DIN EN 16023 E:2012 Draft Document - Characterization of waste - Determination of gross calorific value and calculation of net calorific value; German version prEN 16023:2012
BS EN 832:2000 Thermal performance of buildings. Calculation of energy use for heating. Residential buildings
AWWA CSC95022 Utility Management and Computer Integration: Who's Playing in Your Sandbox Now
NS 3720:2018 Method for greenhouse gas calculations for buildings
AWWA WQTC71606 The UV Intensity Setpoint Approach Re-defined: Using Validated Calculated Dose Algorithms to Develop Online Dose Monitoring Strategies That Do Not Require UVT Input
NS 3940:2012 Calculation of areas and volumes of buildings
AWWA ACE58346 Design and Implementation of Online Real-Time Disinfection Performance (CT) Monitoring Systems
AWWA WQTC55037 The Use of Computer Simulation for Process Performance Analysis and Operation Management of Water Treatment Plants
BS 6148-1:1981 Methods of test for commercial refrigerated cabinets-Calculation of linear dimensions, areas and volumes

VDI - Verein Deutscher Ingenieure

VDI 3820-1993 Beruecksichtigung des EDV-Einsatzes bei Berechnungsverfahren in der TGA
VDI 3820-1992 Consideration of computer-application by calculations in the building services
VDI 2693 Blatt 1-1972 Investment calculation in material-flow plannings by means of dynamic calculations methods
VDI 2693 Blatt 2-1972 Investitionsrechnung bei Materialflussplanungen mit Hilfe dynamischer Rechenverfahren - Formblatt
VDI 2693 Blatt 1-1994 Investment estimation for planning of material flow with static and dynamic calculation procedures
VDI 2067 Blatt 1 Beiblatt-1990 Economy calculation of heat consuming installations; operating and economical fundamentals; economy calculation systems
VDI 4492-2003 Anwendung von Inventurverfahren in EDV-gefuehrten Lagern

Korean Agency for Technology and Standards (KATS)

KS I ISO 12213-3-2010(2021) Natural gas－Calculation of compression factor－Part 3：Calculation using physical properties
KS I ISO 12213-3-2010(2016) Natural gas－Calculation of compression factor－Part 3：Calculation using physical properties
KS I ISO 12213-3:2010 Natural gas－Calculation of compression factor－Part 3：Calculation using physical properties
KS C IEC 61865:2014 Overhead lines — Calculation of the electrical component of distance between live parts and obstacles — Method of calculation
KS C IEC 61865:2020 Overhead lines — Calculation of the electrical component of distance between live parts and obstacles — Method of calculation
KS A 4314-1986 Radiophotoluminescent glass dosimeter systems
KS A 4314-2001 Radiophotoluminescent glass dosimeter systems
KS C IEC 60287-1-2-2003(2018) Electric cable - Current rating calculation - Part 1: Current rating calculation formula and loss calculation - Section 2: Sheath eddy current loss rate of balanced two-line circuit

International Organization for Standardization (ISO)

ISO 12213-3:1997 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties
ISO 12213-3:2006 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties
ISO/TR 10127:1990 Computer-Aided Design (CAD) Technique; use of computers for the preparation of construction drawings
ISO 13370:1998 Thermal performance of buildings - Heat transfer via the ground - Calculation methods
ISO 13370:2007 Thermal performance of buildings - Heat transfer via the ground - Calculation methods
ISO 13370:2017 Thermal performance of buildings - Heat transfer via the ground - Calculation methods
ISO 13789:1999 Thermal performance of buildings - Transmission heat loss coefficient - Calculation method
ISO 13790:2004 Thermal performance of buildings - Calculation of energy use for space heating
ISO 13789:2017 Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method
ISO 13789:2007 Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method
ISO 23152:2021 Ships and marine technology - Ballast water management systems (BWMS) - Computational physical modelling and calculations on scaling of UV reactors
ISO 18292:2011 Energy performance of fenestration systems for residential buildings - Calculation procedure
ISO/TR 29922:2017 Natural gas - Supporting information on the calculation of physical properties according to ISO 6976
ISO/TS 20460:2015 Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges
ISO 13612-1:2014 Heating and cooling systems in buildings - Method for calculation of the system performance and system design for heat pump systems - Part 1: Design and dimensioning
ISO 16745-1:2017 Sustainability in buildings and civil engineering works - Carbon metric of an existing building during use stage - Part 1: Calculation, reporting and communication
ISO 13612-2:2014 Heating and cooling systems in buildings - Method for calculation of the system performance and system design for heat pump systems - Part 2: Energy calculation

HU-MSZT

MSZ KGST 2386-1980 Mineral oil product viscosity index calculation
MSZ 2970/1-1984 General standards for calculation of stability of steel pipelines
MSZ 04 140/4-1978 Thermodynamic calculations of buildings and building-related structures. Heat load calculation
MSZ 13822/15-1984 Pressure cooker stability calculation internal pressure bearing fixtures
MSZ 13822/13-1984 Pressure cooker stability calculation
MSZ 2970/6-1987 Calculation of steel pipe stability. Calculation and stability testing of steel pipe systems
MSZ 14753/4.lap-1965 Building plan. Structural plan related calculations
MI 7807-1985 Technical design computer program reliability
MNOSZ 16160-1955 National Economic Indicators Calculation Publication

Association Francaise de Normalisation

NF X20-528-3*NF EN ISO 12213-3:2009 Natural gas - Calculation of compression factor - Part 3 : calculation using physical properties
NF P50-730:1999 Thermal performance of buildings - Calculation of energy use for heating - Residential buildings.
NF EN ISO 12213-3:2009 Natural gas - Calculation of the compression factor - Part 3: calculation based on physical characteristics
NF ISO 22628:2002 Road vehicles - Recyclability and recoverability - Calculation method
NF EN ISO 13370:2017 Thermal performance of buildings - Heat transfer through the ground - Calculation methods
NF P50-736:2008 Thermal performance of buildings - Heat transfer via the ground - Calculation methods.
NF P01-067*NF EN 15978:2012 Sustainability of construction works - Assessment of environmental performance of buildings - Calculation method
NF P50-736*NF EN ISO 13370:2017 Thermal performance of buildings - Heat transfer via the ground - Calculation methods
NF EN ISO 15927-3:2009 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 3: calculation of a driving rain index for vertical surfaces from hourly wind and rain data
XP Q03-210*XP ISO/TS 20460:2016 Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges
XP Q03-210-2016 Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges
FD CEN/TR 1295-4:2015 Calculation of mechanical resistance of buried pipelines under various load conditions - Part 4: parameters for design reliability
NF C74-985*NF EN IEC 62985:2019 Methods for calculating size specific dose estimates (SSDE) on computed tomography
NF E51-775-7*NF EN 16798-7:2017 Energy performance of buildings - Ventilation for buildings - Part 7 : calculation methods for the determination of air flow rates in buildings including infiltration (Modules M5-5)
P92-701:1993 FB calculation method - Calculation method used for forecasting the fire resistance of concrete structures
NF ISO 13612-2:2014 Heating and cooling systems in buildings - Method for calculating system performance and system design for heat pump systems - Part 2: energy calculation

GSO

GSO ISO 12213-3:2009 Natural gas - Calculation of compression factor – Part 3: Calculation using physical properties
GSO IEC 61865:2014 Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation
OS GSO ISO 12213-3:2009 Natural gas - Calculation of compression factor – Part 3: Calculation using physical properties
OS GSO IEC 61865:2014 Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation
BH GSO IEC 61865:2015 Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation
OS GSO 1571:2002 Overhead electrical conductors - Calculation methods for stranded bare conductors
GSO ISO 9403:2011 Crude petroleum -- Transfer accountability – Guidelines for cargo inspection
OS GSO ISO 13370:2014 Thermal performance of buildings -- Heat transfer via the ground -- Calculation methods
BH GSO ISO 13370:2016 Thermal performance of buildings -- Heat transfer via the ground -- Calculation methods
GSO 1517:2002 Overhead electrical conductors - Calculation methods for stranded bare conductors
GSO ISO 16745-1:2021 Sustainability in buildings and civil engineering works — Carbon metric of an existing building during use stage — Part 1: Calculation, reporting and communication
GSO ISO/TR 10501:2013 Thermoplastics pipes for the transport of liquids under pressure - Calculation of head losses
BH GSO ISO 16745-1:2022 Sustainability in buildings and civil engineering works — Carbon metric of an existing building during use stage — Part 1: Calculation, reporting and communication
BH GSO ISO 29922:2023 Natural gas — Supporting information on the calculation of physical properties according to ISO 6976
GSO ISO 13370:2014 Thermal performance of buildings -- Heat transfer via the ground -- Calculation methods
GSO ISO 29922:2022 Natural gas — Supporting information on the calculation of physical properties according to ISO 6976
BH GSO ISO 15239:2016 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers
OS GSO ISO 15239:2013 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers
OS GSO ISO/TR 10501:2013 Thermoplastics pipes for the transport of liquids under pressure - Calculation of head losses

German Institute for Standardization

DIN EN ISO 12213-3:2005 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:1997); German version EN ISO 12213-3:2005
DIN EN ISO 12213-3:2010-01 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006); German version EN ISO 12213-3:2009
DIN 60905-3:1985 Tex system; rounding of calculated linear densities
DIN 48351 Bb.1:1967 A-masts; formulas and calculations
DIN 3990-2:1987-12 Calculation of load capacity cylindrical gears; calculation of pitting resistance
DIN EN ISO 13370:2018-03 Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:2017); German version EN ISO 13370:2017
DIN EN ISO 13370:2008 Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:2007); English version of DIN EN ISO 13370:2008-04
DIN EN 13631-15:2005 Explosives for civil uses - High explosives - Part 15: Calculation of thermodynamic properties; German version EN 13631-15:2005
DIN 25478:2021 Application of computer codes for the assessment of criticality safety
DIN 25478:2021-08 Application of computer codes for the assessment of criticality safety
DIN 3990-2:1987 Calculation of load capacity cylindrical gears; calculation of pitting resistance
DIN EN 16627:2015-09 Sustainability of construction works - Assessment of economic performance of buildings - Calculation methods; German version EN 16627:2015
DIN EN 14346:2007 Characterization of waste - Calculation of dry matter by determination of dry residue or water content; English version of DIN EN 14346:2007-03

ES-AENOR

UNE 22 107 Sulfur in pyrite and similar minerals and its roasting residues. Calculation of six active sulfur
UNE 58-911-1987 Calculation basis for the free elevation and endurance of the teleport elevator when it is stored on high ground
UNE 21-310 Pt.3-1990 Active energy induction calculator (steam meter)
UNE 58-132 Pt.2-1991 Lift calculation rules. Part 2: Applications that may be introduced in the calculation of structures and equipment

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

ITU-R PI.842-1992 Computation of Reliability of HF Radio Systems
ITU-R P.842-4 FRENCH-2007 Computation of Reliability and Compatibility of HF Radio Systems
ITU-R P.842-3-2005 Computation of Reliability and Compatibility of HF Radio Systems
ITU-R P.842-2-1999 Computation of Reliability and Compatibility of HF Radio Systems
QUESTION 95/6-1997 Use of computer technology in television broadcasting applications

CEN - European Committee for Standardization

EN ISO 12213-3:1998 Natural gas Calculation of compression factor Part 3: Calculation using physical properties
PREN 16798-11-2015 Energy performance of buildings - Module M4-3- Calculation of the design cooling load
EN ISO 13370:2007 Thermal performance of buildings - Heat transfer via the ground - Calculation methods

European Committee for Standardization (CEN)

EN ISO 12213-3:2009 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006)
EN ISO 13789:2017 Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method
EN ISO 13789:1999 Thermal Performance of Buildings - Transmission Heat Loss Coefficient - Calculation method ISO 13789:1999
EN ISO 13789:2007 Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method
prEN 832-1992 Thermal performance of buildings; calculation of energy use for heating; residential buildings
EN ISO 13786:1999 Thermal Performance of Building Components - Dynamic Thermal Characteristics - Calculation Methods ISO 13786:1999
EN 13631-15:2005 Explosives for civil uses - High explosives - Part 15: Calculation of thermodynamic properties
EN ISO 13370:2017 Thermal performance of buildings - Heat transfer via the ground - Calculation methods

International Electrotechnical Commission (IEC)

IEC 61865:2001 Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation

GOST

GOST R 70927-2023 Natural gas. Methods for calculating physical properties. Calculation of the compression factor in the low temperature range
GOST 34898-2022 Natural gas. Supporting information on the calculation of physical properties

KR-KS

KS I ISO 12213-3-2023 Natural gas — Calculation of compression factor — Part 3: Calculation using physical properties
KS C IEC 61865-2020 Overhead lines — Calculation of the electrical component of distance between live parts and obstacles — Method of calculation

American Society for Testing and Materials (ASTM)

ASTM C1045-01 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
ASTM C1045-97 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
ASTM E1672-06 Standard Guide for Computed Tomography (CT) System Selection
ASTM D7152-05e1 Standard Practice for Calculating Viscosity of a Blend of Petroleum Products
ASTM D7152-05 Standard Practice for Calculating Viscosity of a Blend of Petroleum Products
ASTM E2446-15 Standard Practice for Manufacturing Characterization of Computed Radiography Systems
ASTM E2007-10(2023) Standard Guide for Computed Radiography
ASTM E2446-24 Standard Practice for Manufacturing Characterization of Computed Radiography Systems
ASTM E2446-16 Standard Practice for Manufacturing Characterization of Computed Radiography Systems

International Telecommunication Union (ITU)

ITU-R PI.842-1-1994 Computation of Reliability and Compatibility of HF Radio Systems
ITU-R P.842-4-2007 Calculation of reliability and compatibility of high frequency radio systems
ITU-R P.842-2013 Computation of reliability and compatibility of HF radio systems
ITU-R P.842-4 SPANISH-2007 Computation of Reliability and Compatibility of HF Radio Systems
ITU-R P.842-5-2013 Computation of reliability and compatibility of HF radio systems
ITU-T HDBK VOL III CIC-1989 Capacitive Inductive and Conductive Coupling: Physical Theory and Calculation Methods Volume III
ITU-R QUESTION 956-1997 Use of computer technology in television broadcasting applications

AENOR

UNE 207011:2004 Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation.
UNE-EN ISO 12213-3:2010 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006)
UNE 80304:2006 Cements. Calculations of potencial composition of portland clinker.

ETSI - European Telecommunications Standards Institute

GR MEC 017-2018 Mobile Edge Computing (MEC); Deployment of Mobile Edge Computing in an NFV environment (V1.1.1)

RU-GOST R

GOST 33964-2016 Stationary water-tube boilers. Verification calculation. Static strength calculation. Cyclical strength calculation. Brittle-structure resistance calculation
GOST 30319.0-1996 Natural gas. Methods of calculation of physical properties. General
GOST 30319.3-1996 Natural gas. Methods of calculation of physical properties. Definition of physical properties by equation of state
GOST R 52857.12-2007 Vessels and apparatus. Norms and methods of strength calculation. Requirements for representation of the strength calculations carried out on the computer
GOST R ISO 13370-2016 Thermal performance of buildings. Calculation method of heat transfer via the ground
GOST 30319.1-2015 Natural gas. Methods of calculation of physical properties. General statements
GOST 30319.2-2015 Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
GOST 30319.3-2015 Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on component composition
GOST R 57700.36-2021 High-perfomance computing systems. Performance evaluation of high-perfomance computing systems on algorithms using convolutional neural network
GOST 25.504-1982 Strength calculation and testing. Methods of fatigue strength behaviour calculation
GOST R 56139-2014 Functional foods. Methods for detection and enumeration of probiotic microorganisms
GOST 30319.2-1996 Natural gas. Methods of calculation of physical properties. Definition of compressibility coefficient

American Society of Mechanical Engineers (ASME)

ASME B89.4.23-2020 X-Ray Computed Tomography (CT) Performance Evaluation
ASME VVUQ 10.2-2021 The Role of Uncertainty Quantification in Verification and Validation of Computational Solid Mechanics Models

American National Standards Institute （ANSI)

ANSI/ASME B89.4.23-2020 X-Ray Computed Tomography (CT) Performance Evaluation

Japanese Industrial Standards Committee (JISC)

JIS Z 4923:2015 Phantoms for X-ray computed tomography
JIS Z 4923:1997 Phantoms for X-ray computed tomography

ZA-SANS

SANS 13370:2009 Thermal performance of buildings - Heat transfer via the ground - Calculation methods

IN-BIS

IS 2666-1963 Slide Rule Specifications (Linear Type)

Aeronautical Radio Inc.

ARINC 628P8 ITEM 2.0 Availability Calculation
ARINC 628P8 ITEM 2.0-2001 Availability Calculation

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD85-2001 Methods for Calculating Failure Rates in Units of FITs

FI-SFS

SFS 2460-1971 Building volume calculation

GOSTR

GOST 34233.12-2017 Vessels and apparatus. Norms and methods of strength calculation. Requirements for representation of the strength calculations carried out on the computer
GOST 34233.5-2017 Vessels and apparatus. Norms and methods of strength calculation. Calculation of shells and bottoms under Influence of support loads

GB-REG

REG NACA-TR-865-1947 Method for calculating wing characteristics by lifting-line theory using nonlinear section lift data

VN-TCVN

TCVN 6661-1-2000 Water quality.Calibration and evaluation of analytical methods and estimation of performance characteristics.Part 1: Statistical evaluation of the linear calibration functions

ES-UNE

UNE-EN ISO 13370:2017 Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:2017) (Endorsed by Asociación Española de Normalización in December of 2017.)
UNE-EN 16627:2016 Sustainability of construction works - Assessment of economic performance of buildings - Calculation methods

NO-SN

NS 3031-2014 Calculation of energy performance of buildings - Method and data
NS 3031-2007 Calculation of energy performance of buildings Method and data
NS 3940-2012 Calculation of areas and volumes of buildings

Association of German Mechanical Engineers

DVS 2205-1-1985 Mathematical calculation of containers and vessels of thermoplastic polymers; parameters
DVS 2205-2 Beiblatt 1-2003 Calculation of tanks and apparatus made of thermoplastics - Welded stationary tanks in the case of installation in buildings
DVS 2205-1 Beiblatt 23-2007 Calculation of creep modulus curves for containers and equipment made of thermoplastic PE 80 at different operating times
DVS 2205-1 Beiblatt 24-2006 Calculation of creep modulus curves for containers and equipment made of thermoplastic PE 100 at different operating times
DVS 2205-1 Beiblatt 23-2006 Calculation of creep modulus curves for containers and equipment made of thermoplastic PE 80 at different operating times
DVS 2205-1 Beiblatt 24-2007 Calculation of creep modulus curves for containers and equipment made of thermoplastic PE 100 at different operating times
DVS 2205-5-1986 Mathematical calculation of containers and vessels of thermoplastic polymers; square containers

RO-ASRO

SR 1907-1-1997 Heating plants Design heat requirements computation for buildings Computation specifications
STAS 10099-1975-1 FERROMAGNETIC OXIDE MATERIALS Calculation of the effective parameters of magnetic piece parts
STAS 10099-1975 FEROMAGNETIC OXIDE MATERIALS Calculation of the effective parameters of magnetic piece parts
STAS 12268-1984 CYLIXDRIGAL INVOLUTK GEAH Calculation of strengLh
STAS 2211-1980 CALCULATION OF THE MASS OF HYGROSCOPIC MATERIALS AND PRODUCTSC

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 796-1983 Standard Microcomputer System Bus (IEEE Computer Society Document)
IEEE 1394-1995 Standard for a High Performance Serial Bus (IEEE Computer Society Document)
IEEE C37.23-1969 guide for calculating losses in isolated phase bus
IEEE 298-1969 GUIDE FOR CALCULATING LOSSES IN ISOLATED-PHASE BUS
IEEE C37.23 INT 1-2005 Metal-Enclosed Bus and Calculating Losses in Isolated-Phase Bus
IEEE C37.23-1987 Metal-Enclosed Bus and Calculating Losses in Isolated-Phase Bus

Lithuanian Standards Office

LST EN ISO 12213-3:2010 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006)
LST EN 15934-2012 Sludge, treated biowaste, soil and waste - Calculation of dry matter fraction after determination of dry residue or water content

ESDU - Engineering Sciences Data Unit

ESDU 93016 B-2010 Parameter estimation of linear systems from frequency response measurements (Computer program)
ESDU 93016-1993 PARAMETER ESTIMATION OF LINEAR SYSTEMS FROM FREQUENCY RESPONSE MEASUREMENTS (COMPUTER PROGRAM)
ESDU 93016 A-2005 Parameter estimation of linear systems from frequency response measurements (computer program.)
DWN 10009-2010 Computer program for estimation of the performance of aircraft type tyres rolling or braking on dry and precipitate contaminated runways (Issue 1)
DWN 10009-2013 Computer program for estimation of the performance of aircraft type tyres rolling or braking on dry and precipitate contaminated runways (Issue 7)
ESDU 89036 B-1992 The calculation of overground sound propagation in the presence of wind and temperature gradients.
ESDU 89036 B-2011 The calculation of overground sound propagation in the presence of wind and temperature gradients
ESDU 89036 B-2012 The calculation of overground sound propagation in the presence of wind and temperature gradients

ACI - American Concrete Institute

ACI SP-106-1988 Computer Applications in Concrete Technology

PT-IPQ

NP 635-1985 Edible microorganisms. Calculation of microorganisms at 30 degrees Celsius. Overview of related methods
NP 3278-1986 Edible microorganisms. Calculation of microorganisms in fish and similar products at 30 degrees Celsius
NP 1409-1987 Edible microorganisms. Fruits, vegetables and similar products. Calculation of microorganisms at 30 degrees Celsius

YU-JUS

JUS U.C2.100-1995 Calculation of area and space indicators of buildings - Calculation coefficients

CH-SNV

SNV 24518-1937 Textiles. Determination of antibacterial activity. Bacteria Counting Method
VSM 23732-1971 Vortex line. Engage. Criteria for Calculation Curves of Displacement Engagement

IX-UIC

UIC O 108-2-2008 Computer generation of global prices and exchange of fare information on computer medium

AT-ON

ONORM S 5250-1-1995 Counting statistics in radioactivity measurements
ONORM M 7500 Teil.4-1980 Heat requirements for buildings; calculation values
ONORM B 8135-1983 Simplified calculation of the time related loss of heat (heating load) of buildings; calculation sheet
ONORM S 5250-1/AC1-1998 Counting statistics in radioactivity measurements (Corrigendum)
ONORM E 4201-1980 Electrical overhead lines; wooden poles; calculation and construction

NL-NEN

NEN 1068-1991 Thermal insolation of buildings Calculation methods
NEN 1068-1993 Thermal insulation of buildings. Calculation methods
NEN 2865-1989 Fruit juices - Calculation of sugar free extract
NEN 5067-1985 Cooling load calculation for buildings

BE-NBN

NBN B 62-003-1986 Calculation of building heat consumption
NBN S 01-014-1979 Acoustics - Method for calculating loudness level

PL-PKN

PN C04229-1974 Rubber Calculating of rubber polymer content

US-FCR

FCR COE CPAR-SL-97-1 FINAL REPORT-1997 COMPUTER SOFTWARE PROGRAM FOR ON-LINE PROCESS CONTROL OF PRODUCTION OF PORTLAND-CEMENT CONCRETE

American Nuclear Society (ANS)

ANS 5.4-2011 Method for calculating the fractional release of volatile fission products from oxide fuel
ANS 10.5-1994 Accommodating User Needs in Computer Program Development

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE MN-00-14-2000 Symposium on the Use of Computational Fluid Dymanics in Heat-Exchanger Design
ASHRAE CI-01-4-2001 Symposium on Use of Computational Fluid Dynamics in Heat Exchanger Design
ASHRAE CI-01-10-1-2001 Results of the HERS BESTEST on an Energy Simulation Computer Program
ASHRAE LO-09-013-2009 High Performance Computing with High Efficiency

ANS - American Nuclear Society

5.4-2011 Method for calculating the fractional release of volatile fission products from oxide fuel
10.5-1994 Accommodating User Needs in Computer Program Development

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 4784-2005 The Calculation of Climatic Design Conditions in the 2005 ASHRAE Handbook - Fundamentals RP-1273

Indonesia Standards

SNI 2821-2011 Tata cara perhitungan evapotranspirasi potensial dengan panci penguapan tipe“A”

U.S. Air Force

AIR FORCE MIL-C-83324-1971 COMPUTER, ROTATION AND GO-AROUND CPU-110/A

Society of Automotive Engineers (SAE)

SAE J2597-2017 Computer Generated Shot Peening Saturation Curves
SAE J2597-2010 Computer Generated Shot Peening Saturation Curves
SAE AIR5715-2009 Procedure for the Calculation of Aircraft Emissions

SE-SIS

SIS SEN 36 01 12-1965 Joint construction of power and telecommunication lines Calculation of strength
SIS SS 18 71 78-1990 Biofuels and peat — Determination of raw bulk density and calculation of dry raw bulk density in a large container