iso4287 Chinese Roughness Specification Chinese

iso4287 Chinese Roughness Specification Chinese, Total:58 items.

The international standard classification for "iso4287 Chinese Roughness Specification Chinese" includes: .

The Chinese standard classification for "iso4287 Chinese Roughness Specification Chinese" includes: Length Measurement .

National Metrological Technical Specifications of the People's Republic of China

JJF 1099-2003 Calibration Specification of Roughness Comparison Specimens
JJF 1099-2018 Calibration Specification for Roughness Comparison Specimens
JJF 1105-2018 Calibration Specification for Contact(Stylus)Instruments of Surface Roughness Measurement by Profile Method
JJF 1210-1990 O.T.N of Sourface Roughness Standard
JJF 1105-2003 Calibration Specification for Contact (Stylus) Instruments of Surface Roughness Measurement by the Profile Method

BS 2634-3:1980 Specification for roughness comparison specimens-Cast surfaces
BS 2634-3:1967 Specification for roughness comparison specimens. Specimens representing milled surfaces
BS 2634-1:1960 Specification for roughness comparison specimens. Ground flat and cylindrical surfaces
BS 2634-1:1955 Specification for roughness comparison specimens. Ground cylindrical type ( primary texture)
BS 2634-1:2010 Roughness comparison specimens. Part 1: Specification for turned, ground, bored, milled, shaped and planed specimens
BS 2634-1:1987 Roughness comparison specimens. Specification for turned, ground, bored, milled, shaped and planed specimens
BS 2634-2:1964 Specification for roughness comparison specimens. Specimens representing turned and bored surfaces
BS 2634-2:1978 Specification for roughness comparison specimens-Spark-eroded, shot blasted and grit blasted, and polished
BS 2634-1:1970 Specification for roughness comparison specimens. Specimens representing ground flat and cylindrical surfaces
BS 2634-1:1974 Specification for roughness comparison specimens-Turned, ground, bored, milled, shaped and planed

AASHTO PP 37-2004 Standard Practice for Determination of International Roughness Index (IRI) to Quantify Roughness of Pavements
PP 37-2004 Standard Practice for Determinination of International Roughness Index (IRI) to Quantify Roughness of Pavements
R 43-2013 Standard Practice for Quantifying Roughness of Pavements
AASHTO R 43-2013 Standard Practice for Quantifying Roughness of Pavements
AASHTO R 43-2013(2021) Standard Practice for Quantifying Roughness of Pavements
R 43M/R 43-2007 Standard Practice for Quantifying Roughness of Pavements
AASHTO R 43M/R 43-2007 Standard Practice for Quantifying Roughness of Pavements
PP37-1999 Standard Practice for Determining Roughness of Pavements
AASHTO R 43-2013(R2017) Standard Practice for Quantifying Roughness of Pavements
PP 37M-1999 Standard Practice for Quantifying Roughness of Pavements
AASHTO PP37-2000 Standard Practice for Quantifying Roughness of Pavements 2000 Edition
PP37-2000 Standard Practice for Quantifying Roughness of Pavements (2000 Edition)

AS B196.1:1962 Specification for roughness comparison specimens - Ground flat and cylindrical types
AS B196.2:1966 Specification for roughness comparison specimens - Specimens representing turned and bored surfaces

DIN 3142:1960 Representation of surface roughness codes in drawings
DIN 4776 Beiblatt 1:1990 Measuring the surface roughness parameters Rx, Rpx, Ryx, Mr1, Mrz describing the material part (profile bearing length ratio) in the roughness profile
DIN 267-2:1968 Fasteners - Technical specification, surface roughness for product classes A and B
DIN 267-2:2017-06 Fasteners - Technical specification, surface roughness for product classes A and B
DIN 267-2 E:2016-01 Fasteners - Technical specification, surface roughness for product classes A and B
DIN 267-2 E:2016 Draft Document - Fasteners - Technical specification, surface roughness for product classes A and B

STAS 5730/2-1985 Surface conditions SURFACE ROUGHNESS PARA- METERS AND SPECIFICATIONS

CSN 49 0212-1988 Wood surface roughness comparison specimens of wood. Technical requirements
CSN ISO 468:1993 Surface roughness. Parameters, their values and general rules for specifying requirements

UNI 6219:1968 Rotary files and rasps. Coarseness ranges and pitches of cuts.
UNI ISO 468:1991 Surface roughness. Parameters, their values and general rules for specifying requirements.

VDI 3219-1965 Surface roughness and dimensional tolerance in cutting manufacturing

ASTM E1215-93(2024) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E1215-93(2017) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E1215-93(1998) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E1215-93(2007) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E1215-93(2012) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM RR-E17-1002 1987 E1215-Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness

ISO 4288:1985 Rules and procedures for the measurement of surface roughness using stylus instruments
ISO 468:1982 Surface roughness; Parameters, their values and general rules for specifying requirements

DS/ISO 468:1986 Surface roughness. Parameters, their values and general rules for specifying requirements

SNI 05-2621-1992 Kekasaran permukaan, Parameter dan peraturan umum untuk menetapkan persyaratan

ESDU 79014 A-2007 Losses caused by friction in straight pipes with systematic roughness elements.

Others: