iso3302-1 M2 tolerance table

iso3302-1 M2 tolerance table, Total:140 items.

The international standard classification for "iso3302-1 M2 tolerance table" includes: Limits and fits , Rubber and plastics products in general , Watches .

The Chinese standard classification for "iso3302-1 M2 tolerance table" includes: Basic standards and general methods , Rubber seal , Horology .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3672.1-2002 Rubber--Tolerances of products--Part 1:Dimensional tolerances
GB/T 17773-1999 Tolerancing of orientation and location Projected tolerance zone

未注明发布机构

DIN 58700-1:1971 ISO-limits and fits; selection of tolerance zones for fine-mechanics, tolerance zones, nominal deviations
DIN ISO 3302-1 E:2016-10 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DIN ISO 3302-1:2018E Rubber - Tolerances for products - Part 1: Dimensional tolerances
DIN 2769 E:2022-10 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN 2769 E:2020-09 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication

Professional Standard - Light Industry

QB/T 4521-2013 Tolerances for watch linear dimensions up to 3mm without individual tolerance indications
QB/T 2813.1-2006 Mineral and sapphire watch-glasses-Part 1:Dimensions and tolerances

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39141.1-2020 Mineral and sapphire watch-glasses—Part 1:Dimensions and tolerances

Professional Standard - Aviation

HB 7748-2004 Requirement for selection and interrelation of dimension tolerance geometrical tolerance and surface roughness

Society of Automotive Engineers (SAE)

SAE AS176C-2001 Limits, Table of Limits and Lubrication Charts
SAE RS-724-1-1975 RS724 Forgings, Tolerances and Surface Condition

GSO

GSO OIML R111-2:2007 Weights of Classes E1, E2,F1,F2,M1,M1-2,M2,M2-3 and M3 Part 2: Test Report Format
BH GSO ISO 3302-1:2016 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances
GSO ISO 3302-1:2015 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances
OS GSO ISO 3302-1:2015 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances
BH GSO ISO 129-1:2016 Technical drawings -- Indication of dimensions and tolerances -- Part 1: General principles
OS GSO ISO 129-1:2013 Technical drawings -- Indication of dimensions and tolerances -- Part 1: General principles

RO-ASRO

STAS 10265/1-1984 Tolerances for buildings TOLERANCE FOR ROUGH CONCRETE SURFACES
STAS SR EN 22768-1-1995 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
STAS 10848-1990 Gauges for surfaces position control tolerances

International Organization for Standardization (ISO)

ISO 965-3:1998/cor 1:2009 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads; Technical Corrigendum 1
ISO 6284:1985 Tolerances for building; Indication of tolerances on building and construction drawings
ISO 3302-1:1996/Amd 1:2001 Rubber - Tolerances for products - Part 1: Dimensional tolerances; Amendment 1: Classification system for flash
ISO 3302-1:2014 Rubber - Tolerances for products - Part 1: Dimensional tolerances
ISO 3302-1:1996 Rubber - Tolerances for products - Part 1: Dimensional tolerances
ISO 286-1:2010/cor 1:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits; Technical Corrigendum 1
ISO 1101:2012/Cor 1:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out; Technical Corrigendum 1
ISO 965-1:1998/cor 1:2009 ISO general-purpose metric screw threads - Tolerances - Part 1: Principles and basic data; Technical Corrigendum 1
ISO 2768-1:1989 General tolerances; part 1: tolerances for linear and angular dimensions without individual tolerance indications
ISO 14368-1:2000 Mineral and sapphire watch-glasses - Part 1: Dimensions and tolerances
ISO 286-2:2010/cor 1:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts; Technical Corrigendum 1
ISO 14368-1:2000/cor 1:2006 Mineral and sapphire watch-glasses - Part 1: Dimensions and tolerances; Technical Corrigendum 1
ISO 129-1:2004 Technical drawings - Indication of dimensions and tolerances - Part 1: General principles
ISO/R 286:1962 ISO system of limits and fits; Part I : General, tolerances and deviations
ISO 286-2:1988/Cor 1:2006 ISO system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts; Technical Corrigendum 1
ISO 3443-1:1979 Tolerances for building; Part 1 : Basic principles for evaluation and specification

SCC

NS 1557:1966 ISO tolerances and fits — Bore tolerances — Selection for general purposes
ISO 286-2:1988/DAmd 1 ISO system of tolerances and fits — Part 2: Tables of standard tolerance degrees and limit deviations of bores and shafts — Amendment 1
DANSK DS/ISO 3302-1:2014 Rubber - Tolerances for products - Part 1: Dimensional tolerances
13/30278121 DC BS ISO 3302-1. Rubber. Tolerances for products. Part 1. Dimensional tolerances
BS 6107-1:1981 Rolling bearings: tolerances-Glossary of terms
UNE 53508-1:2001 Rubber. Tolerances for products. Part 1: Dimensional tolerances.
NS-EN 22768-1:1993 General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)
DIN ISO 3302-1 E:2016 Draft Document - Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:2014); Text in German and English
NS-ISO 2768-1:1989 General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
AENOR UNE-EN 22768-1:1994 GENERAL TOLERANCES. PART 1: TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS.
DANSK DS/EN 22768-1:1993 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
DANSK DS/ISO 2768-1:1993 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
BS 969:1953 Plain limit gauges limits & tolerances
NS 1562:1972 ISO system of limits and fits — Tolerances for gauges
ISO 1101:2004/DAmd 1 Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out — Amendment 1: Representation of specifications in the form of a 3D model
ISO 13348:2007/FDAmd 1 Industrial fans — Tolerances, methods of conversion and technical data presentation — Amendment 1

Japanese Industrial Standards Committee (JISC)

JIS B 0401-2:1998 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
JIS B 0029:2000 Technical drawings -- Tolerancing of orientation and location -- Projected tolerance zone
JIS B 0405:1991 General tolerances -- Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
JIS B 0401-1:1998 ISO system of limits and fits -- Part 1: Bases of tolerances, deviations and fits
JIS Z 8317-1:2008 Technical drawings -- Indications of dimensions and tolerances -- Part 1: General principles

Danish Standards Foundation

DS/ISO 6284:1987 Tolerances for building. Indication of tolerances on building and construction drawings
DS/ISO 2768-1:1990 General tolerances. Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
DS/ISO 3302-1:2011 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DS/ISO 3302-1/Amd. 1:2011 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DS/EN 22768-1:1993 General tolerances. Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
DS/ISO 2768-1:1993 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications

British Standards Institution (BSI)

BS ISO 3302-1:2014 Rubber. Tolerances for products. Dimensional tolerances
BS 3734-1:1997 Rubber. Tolerances for products. Dimensional tolerances

ZA-SANS

SANS 3302-1:2003 Rubber - Tolerances for products Part 1: Dimensional tolerances

Association Francaise de Normalisation

NF ISO 3302-1:2014 Caoutchouc - Tolérances pour produits - Partie 1 : tolérances dimensionnelles
NF T47-001-1*NF ISO 3302-1:2014 Rubber - Tolerances for products - Part 1 : dimensional tolerances
NF ISO 14368-1:2008 Mineral and sapphire watch glasses - Part 1: dimensions and tolerances
NF EN 22768-1:1993 General tolerances - Part 1: tolerances for linear and angular dimensions not affected by individual tolerances
NF P02-023*NF EN ISO 6284:1999 Construction drawings. Indication of limit deviations.
NF S86-400-1*NF ISO 14368-1:2008 Mineral and sapphire watch-glasses - Part 1 : dimensions and tolerances.
NF E02-350-1*NF EN 22768-1:1993 General tolerances. Part 1 : tolerances for linear and angular dimensions without individual tolerance indications.
NF E04-521-1:2005 Technical drawings - Indication of dimensions and tolerances - Part 1: general principles.
NF E02-100-1:1993 Iso system of limits and fits. Part 1 : bases of tolerances, deviations and fits.

KR-KS

KS M ISO 3302-1-2018 Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS M ISO 3302-1-2018(2023) Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS B ISO 2768-1-2019 General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications

Korean Agency for Technology and Standards (KATS)

KS M ISO 3302-1-2023 Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS M ISO 3302-1:2018 Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS B ISO 2768-1:2016 General tolerances — Part 1: Tolerances of linear and angular dimensions without individual tolerance indications
KS B ISO 2768-1:2002 General tolerances-Part 1:Tolerances of linear and angular dimensions without individual tolerance indications
KS B ISO 2768-1:2014 General tolerances — Part 1: Tolerances of linear and angular dimensions without individual tolerance indications
KS B ISO 14368-1:2013 Mineral and sapphire watch－glasses－Part 1：Dimensions and tolerances
KS B ISO 14368-1:2005 Mineral and sapphire watch-glasses-Part 1:Dimensions and tolerances
KS B ISO 2768-1:2019 General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
KS A ISO 10578:2013 Technical drawings-Tolerancing of orientation and location-Projected tolerance zone
KS A ISO 10578:2001 Technical drawings-Tolerancing of orientation and location-Projected tolerance zone
KS B 0412-2000(2005) General tolerances-Part 1：Tolerances for linear and angular dimensions without individual tolerance indications
KS B ISO 286-2:2009 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2014 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B 0412-1995 General tolerances-Part 1:Tolerances for linear and angular dimensions without individual tolerance indications
KS B ISO 14368-1-2013 Mineral and sapphire watch－glasses－Part 1：Dimensions and tolerances
KS B ISO 14368-1-2005(2010) Mineral and sapphire watch－glasses－Part 1：Dimensions and tolerances
KS B ISO 286-2:2015 Geometrical product specifications(GPS) — ISO code system fortolerances on linear sizes — Part 2: Tables of standard toleranceclasses and limit deviations for holes and shafts
KS B ISO 129-1:2013 Technical drawings-Indication of dimensions and tolerances-Part 1:General principles
KS B ISO 129-1:2014 Technical drawings — Indication of dimensions and tolerances — Part 1: General principles
KS B ISO 286-1:2016 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits
KS B ISO 286-1:2009 ISO system of limits and fits-Part 1:Bases of tolerances, deviations and fits
KS A ISO 1101:2002 Geometrical product specifications(GPS)-Geometrical tolerancing- Tolerancing of form, orientation, location and run-out
KS A ISO 1101:2014 Geometrical product specifications(GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out

German Institute for Standardization

DIN ISO 3302-1:2018 Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:2014)
DIN ISO 3302-1:1999 Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:1996)
DIN 2769:2023 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN 2769:2023-04 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN 2769:2021 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN ISO 286-1:1990 ISO system of limits and fits; bases of tolerances, deviations and fits; identical with ISO 286-1:1988
DIN EN ISO 286-1:2019 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013) (includes Corrigendum :2013)
DIN ISO 286-2:1990 ISO system of limits and fits; tables of standard tolerance grades and limit deviations for holes and shafts; identical with ISO 286-2:1988
DIN ISO 2768-1:1991 General tolerances; tolerances for linear and angular dimensions without individual tolerance indications; identical with ISO 2768-1:1989
DIN 58700-1:1978 ISO-limits and fits; selection of tolerance zones for fine-mechanics, tolerance zones, nominal deviations
DIN ISO 2768-1:1991-06 General tolerances; tolerances for linear and angular dimensions without individual tolerance indications; identical with ISO 2768-1:1989

ES-UNE

UNE-EN ISO 286-1:2011/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
UNE-ISO 3302-1:2023 Rubber. Tolerances for products. Part 1. Dimensional tolerances
UNE-EN ISO 286-2:2011/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)

AT-ON

ONORM EN 22768-1-1993 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)
ONORM M 1116-1988 Surface roughness and ISO-tolerance quality Rugosite des surfaces et qualite de tolerance ISO
ONORM E 7225-1991 Ceramic components for electrical purposes - General tolerances for dimensions, form and position tolerances

VDI - Verein Deutscher Ingenieure

VDI 2730 BLATT 1-2018 Tolerances and tolerance managment for linkages - Checklists - Approach and tolls

European Committee for Standardization (CEN)

EN 22768-1:1993 General tolerances; part 1: tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)
EN ISO 129-1:2019 Technical product documentation (TPD) - Presentation of dimensions and tolerances - Part 1: General principles (ISO 129-1:2018)

CZ-CSN

CSN 01 4949-1976 Straight ? face splined joints. Tolerances
CSN ISO 2768-1:1992 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications

Lithuanian Standards Office

LST EN 22768-1-2001 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)

VN-TCVN

TCVN 7294-1-2003 General tolerances.Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
TCVN 2263-1-2007 General tolerances.Part1:Tolerances for linear and angular dimensions without individual tolerance indications

HU-MSZT

MSZ 11023/2-1984 R. C Part Surface Measurements and Tolerancing

TR-TSE

TS 2352-1976 TOLERANCES FOR RUILDING — VOCABULARY

SE-SIS

SIS SMS 2400-1964 Tolerances for gauges. Synoptic tablefor holes and shafts
SIS SS-ISO 2768-1:1990 General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
SIS SS-ISO 7737:1987 Tolerances for building - Presentation of dimensional accuracy data

PL-PKN

PN M06102-1970 Cu?ting of metals Allowonces for surlace grinding

RU-GOST R

GOST 16085-1980 Gauges for surface position checking. Tolerances

American Gear Manufacturers Association

AGMA ISO 17485-A08 SUPP:2008 Bevel Gears - ISO System of Accuracy - Tolerance Tables

AGMA - American Gear Manufacturers Association

ISO 17485-A08 SUPP:2008 Bevel Gears - ISO System of Accuracy - Tolerance Tables
2015/915-1-A02 SUPP-2002 Accuracy Classification System- Tangential Measurement Tolerance Tables for Cylindrical Gears (Supplemental Tables for AGMA 2015/915-1-A02)

AENOR

UNE-EN 22768-1:1994 GENERAL TOLERANCES. PART 1: TOLERANCES FOR LINEAL AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS.
UNE 53508-1:2011 Rubber. Tolerances for products of solid rubber. Part 1: Dimensional tolerances

Others: