Instrument that can measure DNA concentration

Instrument that can measure DNA concentration, Total:148 items.

The international standard classification for "Instrument that can measure DNA concentration" includes: Installations in buildings , Pulps , Pigments and extenders , Rubber , Latex and raw rubber , Geology. Meteorology. Hydrology .

The Chinese standard classification for "Instrument that can measure DNA concentration" includes: Gas supply engineering , Papermaking in general , Paper pulp and paperboard , Basic standards and general methods for dye , Forestry chemical raw material , Meteorology , Basic standards and general methods .

Group Standards of the People's Republic of China

T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/WJZZ 009-2021 Whole measurement calibration method of particle number concentration measuring instrument
T/NAIA 0193-2023 Determination of Concentration and Purity of Single-chain Antibody Eukaryotic Expression Plasmid DNA by UV Spectrophotometry

未注明发布机构

DIN CEN/TS 17021:2017*DIN SPEC 33976:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
DIN 58932-3 E:2016-01 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrozytes

National Metrological Verification Regulations of the People's Republic of China

JJG 950-2000 Verification Regulation of Oil Content in Water Analyzer
JJG 846-2015 Verification Regulation of Dust Concentration Measuring Instruments
JJG 1089-2013 Verification Regulation of Osmometers
JJG(煤炭) 08-1996 Verification Regulation of Direct Reading Mine Dust Concentration Measuring Instrument
JJG 950-2012 Analyzers for Oil Content in Water

Professional Standard - Urban Construction

CJ/T 524-2018 Gas odorant concentration monitor

Professional Standard - Electricity

DL/T 1002-2022 Calibration method of low concentration dissolved oxygen meter

Professional Standard - Nuclear Industry

EJ/T 20186-2018 Determination of 137Cs activity concentration in low-level organic waste liquid by gamma spectroscopy
EJ/T 20216-2018 Environmental radon concentration double filter membrane measuring instrument
EJ/T 20193-2018 Determination of 137Cs Activity Concentration in Radioactive Metal Waste by Gamma Spectroscopy

工业和信息化部

JB/T 20201-2021 Vapourous hydrogen peroxide concentration detector

National Metrological Technical Specifications of the People's Republic of China

JJF 1659-2017 Calibration Specification for PM2.5 Mass Concentration Measurement Instruments
JJF 1716-2018 Program of Pattern Evaluation of Dust Concentration Measuring Instruments

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5399-2004 Pulps—Determination of stock concentration
GB/T 6688-1986 Determination of relative strength of dyes(Instrumental method)
GB/T 8300-2008 Natural rubber latex concentrate - Determination of alkalinity
GB/T 8300-2001 Natural rubber latex cincentrate--Determination of alkalinity
GB/T 5399-1985 Pulp--Determination of stock concentration--Rapid method

中国气象局

QX/T 509-2019 Specifications for GRIMM 180 particle concentration monitor calibration

Professional Standard - Machinery

JB/T 5996-1992 Roundness Measurement Assessment of Accuracy of Three-point Measuring Method and the Measurement Instrument Used

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38165-2019 Detection of circulating cell-free DNA concentration in human peripheral blood—Real-time PCR method based on Alu sequence

Professional Standard - Agriculture

GB/T 43859-2024 Test method for performance of water activity meters

German Institute for Standardization

DIN EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations; German version EN 13205:2001
DIN CEN/TS 17021:2017-05*DIN SPEC 33976:2017-05 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques; German version CEN/TS 17021:2017
DIN EN ISO 23210:2009-12 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009); German version EN ISO 23210:2009
DIN 10318:1995 Determination of the density of buttermilk serum
DIN EN 13205-4:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version EN 13205-4:2014

British Standards Institution (BSI)

BS EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
BS PD CEN/TS 17021:2017 Stationary source emissions. Determination of the mass concentration of sulphur dioxide by instrumental techniques
BS EN IEC 61563:2021 Radiation protection instrumentation. Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs
BS EN ISO 4119:1996 Pulps. Determination of stock concentration
BS EN ISO 4119:1995 Pulps. Determination of stock concentration
BS EN ISO 4119:1996(1999) Pulps — Determination ofstock concentration
BS EN 13205-4:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on comparison of concentrations

European Committee for Standardization (CEN)

EN 13205:2001 Workplace Atmospheres - Assessment of Performance of Instruments for Measurement of Airborne Particle Concentrations
PD CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
EN ISO 13161:2020 Water quality - Polonium 210 - Test method using alpha spectrometry (ISO 13161:2020)
EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations

SCC

AWWA JAW60510 Journal AWWA — Low-Level Turbidity Measurements: A Comparison of Instruments
UNE-EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations.
DANSK DS/CEN/TS 17021:2017 Stationary source emissions – Determination of the mass concentration of sulphur dioxide by instrumental techniques
DANSK DS/EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
NS-EN 13205:2001 Workplace atmospheres — Assessment of performance of instruments for measurement of airborne particle concentrations
AS 1827:1975 Instruments for measuring gas concentration in explosive atmospheres
UNE 26443:1992 ROAD VEHICLES. INSTRUMENTS FOR THE MEASUREMENT OF ALCOHOL CONCENTRATION IN EXALED AIR. EVIDENTIAL BREATH ANALYSERS.
DANSK DS/EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
DANSK DS/ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
BS IEC 61563:2019 Radiation protection instrumentation. Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs
NS-EN ISO 23210:2009 Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at low concentrations by use of impactors (ISO 23210:2009)
AENOR UNE-EN ISO 23210:2010 Stationary source emissions - Determination of PM10/PM2.5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
DANSK DS/EN ISO 4119:1996 Pulps - Determination of stock concentration
AENOR UNE-EN 45544-2:2000 WORKPLACE ATMOSPHERES. ELECTRICAL APPARATUS USED FOR THE DIRECT DETECTION AND DIRECT CONCENTRATION MEASUREMENT OF TOXIC GASES AND VAPOURS. PART 2: PERFORMANCE REQUIREMENTS FOR APPARATUS USED FOR MEASURING CONCENTRATIONS IN THE REGION OF LIMIT VALUES.
UNE-EN 45544-2:2000 WORKPLACE ATMOSPHERES. ELECTRICAL APPARATUS USED FOR THE DIRECT DETECTION AND DIRECT CONCENTRATION MEASUREMENT OF TOXIC GASES AND VAPOURS. PART 2: PERFORMANCE REQUIREMENTS FOR APPARATUS USED FOR MEASURING CONCENTRATIONS IN THE REGION OF LIMIT VALUES.
AENOR UNE 26443:1992 Road vehicles. Instruments intended to measure the concentration of alcohol in exhaled air. Ethylometers.
DANSK DS/EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
11/30204376 DC BS ISO 13271. Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
NS-EN 13205-4:2014 Workplace exposure — Assessment of sampler performance for measurement of airborne particle concentrations — Part 4: Laboratory performance test based on comparison of concentrations
DANSK DS/EN IEC 61563:2021 Radiation protection instrumentation – Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs
AENOR UNE-EN 45544-3:2000 WORKPLACE ATMOSPHERES. ELECTRICAL APPARATUS USED FOR THE DIRECT DETECTION AND DIRECT CONCENTRATION MEASUREMENT OF TOXIC GASES AND VAPOURS. PART 3: PERFORMANCE REQUIREMENTS FOR APPARATUS USED FOR MEASURING CONCENTRATIONS WELL ABOVE LIMIT VALUES.
DIN EN 13205-4 E:2012 Draft Document - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version prEN 13205-4

Association Francaise de Normalisation

XP X43-043*XP CEN/TS 17021:2018 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
XP CEN/TS 17021:2018 Emissions from stationary sources - Determination of sulfur dioxide mass concentration by instrumental techniques
XP X43-321:2018 Air quality - Emissions from stationary sources - Determination of the mass concentration of ammonia by instrumental techniques
XP X43-322:2018 Air quality - Stationary source emission - Determination of the mass concentration of formaldehyde by instrumental techniques
NF EN ISO 23210:2009 Emissions from stationary sources - Determination of the mass concentration of PM10/PM2.5 in gaseous effluents - Measurement at low concentrations using impactors
NF ISO 13271:2012 Emissions from stationary sources - Determination of the mass concentration of PM10/PM2.5 in gaseous effluents - Measurement at high concentrations using virtual impactors
NF EN ISO 4119:1996 Pastes - Determination of pulp concentration
NF Q50-006*NF EN ISO 4119:1996 Pulps. Determination of stock concentration.
NF V05-001:1959 Food products. Vinegar. Determination of acetic acid concentration.
FD CEN/TR 13205-3:2014 Workplace exposure - Performance assessment of aerosol concentration measuring instruments - Part 3: Analysis of sampling efficiency data
NF EN IEC 61563:2021 Instrumentation for radioprotection - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foods
NF C19-563*NF EN IEC 61563:2021 Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs

Danish Standards Foundation

DS/EN IEC 61563:2021 Radiation protection instrumentation – Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs
DS/EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
DS/EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
DS/EN ISO 4119:1996 Pulps - Determination of stock concentration
DS/ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors

Lithuanian Standards Office

LST EN 13205-2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
LST EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)

GSO

GSO ISO 23210:2024 Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
OS GSO ISO 13271:2015 Stationary source emissions -- Determination of PM10/PM2,5 mass concentration in flue gas -- Measurement at higher concentrations by use of virtual impactors
BH GSO ISO 13271:2017 Stationary source emissions -- Determination of PM10/PM2,5 mass concentration in flue gas -- Measurement at higher concentrations by use of virtual impactors
GSO ISO 13271:2015 Stationary source emissions -- Determination of PM10/PM2,5 mass concentration in flue gas -- Measurement at higher concentrations by use of virtual impactors
GSO ISO 13161:2013 Water quality -- Measurement of polonium 210 activity concentration in water by alpha spectrometry
OS GSO ISO 13161:2013 Water quality -- Measurement of polonium 210 activity concentration in water by alpha spectrometry
BH GSO ISO 13161:2016 Water quality -- Measurement of polonium 210 activity concentration in water by alpha spectrometry
GSO ISO 125:2015 Natural rubber latex concentrate -- Determination of alkalinity
GSO ISO 4119:2015 Pulps -- Determination of stock concentration
BH GSO ISO 4119:2016 Pulps -- Determination of stock concentration
OS GSO ISO 4119:2015 Pulps -- Determination of stock concentration
BH GSO IEC 61874:2016 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ('density logging')
GSO IEC 61874:2015 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ('density logging')

AT-ON

ONORM M 9418-2001 Automatic concentration measuring instruments for carbon monoxide in garages - Specifications and testing
ONORM M 9405-1993 Determination of asbestos concentration in air Dosage des concentrations d'amiante dans l'air

PL-PKN

PN Z70074-1990 Radiation protection in underground ining plants etermination of alpha potential nergy concentrations of radon aughters alibration ot' instruments
PN P50094-1986 Pulps Determination of stock Nconcentration
PN C04243-1972 Plastics Determination of flexural streng?hby Dynstat apparatus

Standard Association of Australia （SAA）

AS 4215.1:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire extinguishing concentrations
AS 4215.2:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire inerting concentrations
AS 2917.1:1994 Copper sulfide concentrates - Determination of copper content - Titrimetric methods

ES-AENOR

UNE 23-301-1988 Carbon monoxide concentration detection equipment in garages and parking lots

KR-KS

KS I ISO 23210-2017 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
KS I ISO 23210-2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
KS M ISO 4119-2021 Pulps — Determination of stock concentration
KS M ISO 4119-2016 Pulps－Determination of stock concentration

Japanese Industrial Standards Committee (JISC)

JIS B 7996:2018 Performance evaluation test method of automated concentration monitoring instrument of dust in flue gas
JIS P 8225:2003 Pulps -- Determination of stock concentration
JIS B 7909:1998 Geodetic instruments -- Theodolites -- Field procedures for determining accuracy
JIS B 7901:1998 Geodetic instruments -- Levels -- Field procedures for determining accuracy

Korean Agency for Technology and Standards (KATS)

KS I ISO 23210:2012 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
KS I ISO 23210:2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
KS I ISO 23210:2017 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
KS I ISO 13271:2014 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
KS I ISO 13271-2014(2019) Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
KS I ISO 13271-2019 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
KS M ISO 4119:2021 Pulps — Determination of stock concentration
KS M ISO 4119:2006 Pulps-Determination of stock concentration
KS M ISO 4119:2016 Pulps－Determination of stock concentration

RU-GOST R

GOST R ISO 13271-2016 Stationary source emissions. Determination of PM/PM mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
GOST 13005-1967 Interferometers for determination of liqnid and gas concentration. Methods and means for verification

American Society for Testing and Materials (ASTM)

ASTM D7512-09 Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
ASTM D7512-09(2023) Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation

NL-NEN

NEN 11034-1-1993 Insulated electric cables.Measurement of smoke density when burned under defined conditions.Part 1:Test apparatus(IEC 1034-1:1990)

International Organization for Standardization (ISO)

ISO 4119:1995 Pulps - Determination of stock concentration
ISO 13271:2012/CD Amd 1:2011 Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors — Amendment 1

TN-INNORPI

NT 14.29-1983 Determine milk concentration

Society of Automotive Engineers (SAE)

SAE ARP4252A-2006 Instrumental Methods of Determining Surface Cleanliness
SAE ARP4252-1995 INSTRUMENTAL METHODS OF DETERMINING SURFACE CLEANLINESS
SAE ARP4252A-2017 Instrumental Methods of Determining Surface Cleanliness

Indonesia Standards

SNI ISO 4119:2014 Pulps - Determination of stock concentration

AENOR

UNE-EN ISO 23210:2010 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
UNE-EN 13205-4:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations

International Electrotechnical Commission (IEC)

IEC 61563:2019 Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs
IEC TR 62461:2015 Radiation protection instrumentation - Determination of uncertainty in measurement

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0405-2-2005 Ermittlung der Atemalkoholkonzentration - Teil 2: Anforderungen an beweissichere Atemalkohol-Messgeraete
VDE 0405-1-2017 Ermittlung der Atemalkoholkonzentration - Teil 1: Anforderungen an beweissichere Atemalkohol-Messgeraete
VDE 0405-1-2015 Ermittlung der Atemalkoholkonzentration - Teil 1: Anforderungen an beweissichere Atemalkohol-Messgeraete

GOST

GOST R 70378.4-2023 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Part 4. Laboratory performance test based on comparison of concentrations

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 61563:2021 Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs

SAE - SAE International

SAE ARP4252B-2017 Instrumental Methods of Determining Surface Cleanliness

BE-NBN

NBN T 03-017-1979 Industrial sulfuric acid, determination of sulfuric acid concentration. Densitometry

CZ-CSN

CSN ISO 8322-7:1994 Geometrical accuracy in building industry. Determination of accuracy of measuring instruments. Part 7: Instruments when used for setting out

Others: