Mobile phase ratio adjustment requirements

Mobile phase ratio adjustment requirements, Total:60 items.

The international standard classification for "Mobile phase ratio adjustment requirements" includes: Piping systems , Installations in buildings , Braking systems , Other equipment for petroleum and natural gas industries .

The Chinese standard classification for "Mobile phase ratio adjustment requirements" includes: Marine hydraulic/pneumatic elements and accessories , Geological mineral survey and development in general , Thermal Measurement , Heat supply, air supply, air conditioning and refrigerating engineering in general , Braking system .

Professional Standard-Ships

CB/T 3928-2001 Manual proportional flow directional block valve for ships

未注明发布机构

DIN 3555 E:2018-11 Proportional Flow Controller for use in drinking water installations - Requirements and tests

Professional Standard - Geology

DZ/T 0059-1993 Technical Requirements for Engineering Geological Survey in Desert Area (Scale: 1:100000~1:500000)

National Metrological Verification Regulations of the People's Republic of China

JJG 285-1993 Verification Regulation of Movingcoil Temperature Indicating Instrument with Time Proportional or PID Action

Military Standard of the People's Republic of China-General Armament Department

GJB 5203-2003 Helicopter transmission system installation and adjustment design requirements

工业和信息化部

YD/T 3368-2018 Technical requireanent of routing policy and tranffic adjustment of Internet interconnection

Professional Standard - Urban Construction

CJ/T 450-2014 Pneumatic gas/air ratio adjustment devices for gas-burning appliances
CJ/T 50-2014 Pneumatic gas and air ratio adjustment device for gas burning appliances

Liaoning Provincial Standard of the People's Republic of China

DB21/T 3000-2018 Nutrient Standards of Antibiotic-Free Feed for Laying Hens and Method of Adjusting Amino Acid Ratio in Technical Specifications of Processing Technology

Group Standards of the People's Republic of China

T/QGCML 1009-2023 Requirements for adjustment and control of combined desulfurization parameters inside and outside the furnace of circulating fluidized bed boilers

Professional Standard - Automobile

QC/T 593-2014 Performance requirements and bench test methods of automobile hydraulic proportional valve

Professional Standard - Petroleum

SY/T 6311-1997 The technical requirements of steamflooding three-dimensional scaled physical modelling experiment

IPC - Association Connecting Electronics Industries

IPC TM-650 2.4.38-1984 Prepreg Scaled Flow Testing
IPC TM-650 2.4.38A-1991 Prepreg Scaled Flow Testing

HU-MSZT

MSZ 6564-1982 flow, cork adjustment template
MNOSZ 1163-1955 Technical Requirements, Adjustable, Qualifications

United States Navy

NAVY MIL-P-24589 A-1992 PROPORTIONER SYSTEMS, BALANCED PRESSURE, AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE
NAVY MIL-P-24589 A (1)-1994 PROPORTIONER SYSTEMS, BALANCED PRESSURE, AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE

Korean Agency for Technology and Standards (KATS)

KS B 6510-1991 Test Methods for Electro-hydraulic Proportional Series Flow Control Valves
KS B 6511-1991 Test Methods for Electro-Hydraulic Proportional Directional Series Flow Control Valves
KS C IEC 61136-1:2013 Semiconductor power convertors-Adjustable speed eletcric drive systems-General requirements-Part 1 : Rating specifications, particularly for d.c. motor drives
KS C IEC 61136-1:2002 Semiconductor power convertors-Adjustable speed eletcric drive systems-General requirements-Part 1 : Rating specifications, particularly for d.c. motor drives

Society of Automotive Engineers (SAE)

SAE J1512-1985 Manual Slack Adjuster Performance Requirements
SAE J1513-2010 External Automatic Slack Adjuster Performance Requirements
SAE J1513-2021 External Automatic Slack Adjuster Performance Requirements
SAE AMS1380A-1992 Scale Conditioner, Alkaline Aircraft Turbine Engine Components

Japanese Industrial Standards Committee (JISC)

JIS B 8653:2002 Test methods for electro-hydraulic proportional metering valves
JIS B 8653:1989 Test methods for electro-hydraulic proportional metering valves
JIS B 8656:2002 Test methods for electro-hydraulic proportional bypass flow control valves
JIS B 8654:1989 Test methods for electro-hydraulic proportional series flow control valves
JIS B 8656:1989 Test methods for electro-hydraulic proportional bypass flow control valves
JIS B 8654:2002 Test methods for electro-hydraulic proportional series flow control valves
JIS B 8657:2002 Test methods for electro-hydraulic proportional directional bypass flow control valves
JIS B 8655:2002 Test methods for electro-hydraulic proportional directional series flow control valves
JIS B 8657:1989 Test methods for electro-hydraulic proportional directional bypass flow control valves
JIS B 8655:1989 Test methods for electro-hydraulic proportional directional series flow control valves

GSO

GSO ISO 2721:2013 Photography -- Cameras -- Automatic controls of exposure

SCC

DIN 3555:2020 Proportional Flow Controller for use in drinking water installations - Requirements and tests
DIN 3555 E:2018 Draft Document - Proportional Flow Controller for use in drinking water installations - Requirements and tests
SN-CWA 17865:2022 Requirements and Guidelines for a complete end-to-end mobile forensic investigation chain

German Institute for Standardization

DIN 3555:2020-08 Proportional Flow Controller for use in drinking water installations - Requirements and tests
DIN 24311:1992-09 Hydraulic fluid power; proportional and servo valves; definitions, symbols, units
DIN 24311:1992 Hydraulic fluid power; proportional and servo valves; definitions, symbols, units

RO-ASRO

STAS 11370-1985 ARC WELDING RECTIFIERS WITH DROPPING VOLTAGE REGULATION CHARACTERISTIC. General technical requirements
STAS 12600-1987 Hydrostatic drives PROPORTIONAL PRESSURE VALVES NP 200 bar Types and main dimensions

CZ-CSN

CSN 35 1703-1984 Complete thyristors ditect-ciurent drives. General technical reguirements
CSN 49 0212-1988 Wood surface roughness comparison specimens of wood. Technical requirements

RU-GOST R

GOST R 51506-1999 Post envelopes. Technical requirements. Control methods
GOST R 51507-1999 Post cards. Technical requirements. Control methods
GOST R 55522-2013 Vehicles. Slack adjusters of drum brakes for vehicles and buses with automatic adjustment. Technical requirements and test methods

US-CFR-file

CFR 15-700.80-2014 Commerce and foreign trade. Part700:Defense priorities and allocations system. SubpartK:Adjustments,exceptions,and appeals. Section700.80:Adjustments or exceptions.

YU-JUS

JUS N.H8.021-1987 Isolating and safety isolating transformers. Bell transformers. Additional reguirements

National Aeronautics and Space Administration (NASA)

NASA NACA-ACR-4C11-1944 Wind-Tunnel Investigation of Shielded Horn Balances and Tabs on a 0.7-Scale Model of XF6F Vertical Tail Surface

NL-NEN

NEN 6361-1988 Vegetable and animal oils and fats Determination of solid phase fraction by pulsed nuclear magnetic resonance (pulsed NMR)

PL-PKN

PN E38003-1991 Electric traction in mining undergrounds. Rectifier stations. Requirements
PN E06072-1974 Selenium rectifiers Generals requirements and tests

European Committee for Standardization (CEN)

CWA 17865:2022 Requirements and Guidelines for a complete end-to-end mobile forensic investigation chain

Military Standards (MIL-STD)

DOD FED-STD-1007-1981 CODING AND MODULATION REQUIREMENTS FOR DUPLEX 9600 BIT/SECOND MODEMS

ESDU - Engineering Sciences Data Unit

ESDU 79009-1979 Numerical methods for solving the potential flow equations for two-dimensional aerofoils in subsonic and transonic flows: brief details@ test cases and examples.

Association Francaise de Normalisation

NF E73-050:1973 Solid and segmental circular saws for cold cutting of metals. Interchangeability dimensions of the drive. Saw diameter range 224 to 2 240 mm.

Others: