Methods for measuring various types of soil water
Methods for measuring various types of soil water, Total:461 items.
The international standard classification for "Methods for measuring various types of soil water" includes: Farming and forestry , Hydrological properties of soils , Soil quality and pedology in general .
The Chinese standard classification for "Methods for measuring various types of soil water" includes: Water and soil conservation , Soil and fertilizer in general .
未注明发布机构
- AS 1289.3.1.1:2009(R2017) Soil test methods for engineering use. Soil classification test. Determination of soil liquid limit. Four-point Casagrande method.
- AS 1289.2.1.4:2005(R2016) Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Microwave-oven drying method (subsidiary method)
- AS 1289.2.1.1:2005(R2016) Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Oven drying method (standard method)
- AS 1289.2.1.5:2005(R2016) Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Infrared lights method (subsidiary method)
- AS 1289.2.1.6:2005(R2016) Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Hotplate drying method
- DIN EN ISO 11274 E:2018-04 Laboratory method for determination of soil quality and water retention properties (draft)
- ASTM RR-D18-1024 2018 D8167-Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth) and In-Place Water Mass Per Unit Volume of Soil and Soil-Aggregate by Permittivity Method (Shallow Depth)
- AS 1289.3.1.2:2009(R2017) Soil test methods for engineering Soil classification test Determination of soil liquid limit One-point Casagrande method (auxiliary method)
- ASTM RR-D18-1020 2011 D4944-Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
- DIN 18121-2 E:2020-03 Soil, investigation and testing - Water content - Part 2: Determination by rapid methods
- ASTM RR-D18-2001 2022 D8153-Test Method for Determination of Soil Water Contents Using a Dielectric Permittivity Probe
- DIN 18121-2:1989 Soil, investigation and testing - Water content - Part 2: Determination by rapid methods
- AS 1289.3.4.1:2008(R2016) Soil Test Methods for Engineering Soil Classification Tests Standard Method for Determination of Linear Shrinkage of Soils
- ASTM RR-G01-1022 2004 G0187- Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
- AS 1289.3.8.3:2014(R2015) Methods of testing soils for engineering purposes - Soil classification tests - Dispersion - Determination of pinhole dispersion classification of a soil
- AATCC TM215-2023 Test Method for Soil Release: Household Soils
- AS 1289.3.8.3:2014/Amdt 1:2015 Methods of testing soils for engineering purposes - Soil classification tests - Dispersion - Determination of pinhole dispersion classification of a soil
- AS 1289.2.1.2:2005(R2016) Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Sand bath method (subsidiary method)
Xinjiang Provincial Standard of the People's Republic of China
- DB65/T 602.10-2001 The determinanation of soil particle siensite in soil
- DB65/T 602.6-2001 The determinanation of available potassium in soil
- DB65/T 602.4-2001 The determinanation of nitrate nitrogen in soil
- DB65/T 602.8-2001 The determinanation of calcium carbonate in soil
- DB65/T 602.7-2001 The determinanation of PH value in soil
- DB65/T 602.9-2001 The determinanation of unit weight in soil
- DB65/T 602.2-2001 The determinanation of hydrolyzable nitrogen in soil
- DB65/T 602.3-2001 The determinanation of ammonium nitrogen in soil
- DB65/T 602.5-2001 The determinanation of available phosphous in soil
Professional Standard - Agriculture
- NY/T 1121.16-2006 Soil Testing - Part 16: Method for Determination of Total Water-soluble Salt
- NY/T 52-1987 Method for the determination of soil water content
- NY/T 2367-2013 Determination of permanent wilting water content in soil—Biological method
- GB 7833-1987 Determination of forest soil water content
- GB 7172-1987 Method for the determination of soil water content
- NY/T 1121.22-2010 Soil testing-Part 22:Cutting ring method for determination of field water--holding capacity in soil
Taiwan Provincial Standard of the People's Republic of China
- CNS 5091-1986 Method of Laboratory Determination of Moisture Content of Soil
Professional Standard - Environmental Protection
- HJ 613-2011 Soil-Determination of dry matter and water content-Gravimetric method
Professional Standard - Forestry
- LY/T 1213-1999 Determination of forest soil water content
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 41689-2022 Soil quality—Direct extraction of soil DNA
SCC
- AS 1289.2.1.2:1992 Methods of testing soils for engineering purposes, Method 2.1.2: Soil moisture content tests - Determination of the moisture content of a soil - Sand bath method (subsidiary method)
- AS 1289.B1.2:1977 Methods of testing soil for engineering purposes - Part B - Soil moisture content tests - Determination of the moisture content of a soil - Sand bath method (subsidiary method)
- AS 1289.2.1.6:1993 Methods of testing soils for engineering purposes, Method 2.1.6: Soil moisture content tests - Determination of the moisture content of a soil - Hotplate drying method (subsidiary method)
- AS 1289.2.1.1:1992 Methods of testing soils for engineering purposes, Method 2.1.1: Soil moisture content tests - Determination of the moisture content of a soil - Oven drying method (standard method)
- AS 1289.B1.5:1988 Methods of testing soil for engineering purposes - Part B - Soil moisture content tests - Determination of the moisture content of a soil - Infrared lights method (subsidiary method)
- AS 1289.2.2.1:1992 Methods of testing soils for engineering purposes, Method 2.2.1: Soil moisture content tests - Determination of the total suction of a soil - Standard method
- AS 1289.B1.1:1977 Methods of testing soil for engineering purposes - Part B - Soil moisture content tests - Determination of the moisture content of a soil - Oven drying method (standard method)
- AS 1289.B1.4:1986 Methods of testing soil for engineering purposes - Part B - Soil moisture content tests - Determination of the moisture content of a soil - Microwave-oven drying method (subsidiary method)
- AS 1289.2.1.5:1992 Methods of testing soils for engineering purposes, Method 2.1.5: Soil moisture content tests - Determination of the moisture content of a soil - Infrared lights method (subsidiary method)
- AS 1289.B1.3:1977 Methods of testing soil for engineering purposes - Part B - Soil moisture content tests - Determination of the moisture content of a soil - Methylated spirit ignition method (subsidiary method)
- AS 1289.2.1.4:1992 Methods of testing soils for engineering purposes, Method 2.1.4: Soil moisture content tests - Determination of the moisture content of a soil - Microwave-oven drying method (subsidiary method)
- AS 1289.3.9:1991 Methods of testing soils for engineering purposes, Method 3.9: Soil classification tests - Determination of the cone liquid limit of a soil
- AS 1289.3.7.1:1995 Methods of testing soils for engineering purposes, Method 3.7.1: Soil classification tests - Determination of the sand equivalent of a soil using a power-operated shaker
- AS 1289.F7.1:1984 Methods of testing soil for engineering purposes - Part F - Soil classification tests - Determination of permeability of a soil - Constant head method
- AS 1289.C2.1:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the plastic limit of a soil (Standard method)
- AS 1289.C7.1:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the sand equivalent of a soil using a power operated shaker
- AS 1289.C4.1:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the linear shrinkage of a soil (Standard method)
- AS 1289.3.5.2:1995 Methods of testing soils for engineering purposes, Method 3.5.2: Soil classification tests - Determination of the soil particle density of combined soil fractions - Vacuum pycnometer method
- DANSK DS/ISO 20244:2018 Soil quality – Screening method for water content – Determination by refractometry
- AS 1289.C1.2:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the liquid limit of a soil - One point method (subsidiary method)
- AS 1289.D2.1:1977 Methods of testing soil for engineering purposes - Part D - Soil chemical tests - Determination of the sulphate content of an natural soil and the sulphate content of the ground water (Standard method)
- AS 1289.C3.1:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Calculation of the plasticity index of a soil (Standard method)
- AS 1289.3.8.1:1997 Methods of testing soils for engineering purposes, Method 3.8.1: Soil classification tests - Dispersion - Determination of Emerson class number of a soil
- UNE 77312:2000 Soil quality. Determination of the water retention characteristic. Laboratory methods.
- AASHTO T 310-2013(2017) Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil–Aggregate by Nuclear Methods (Shallow Depth)
- AS 1289.C5.1:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the soil particle density of a soil
- DANSK DS/ISO 11274:2019 Soil quality – Determination of the water-retention characteristic – Laboratory methods
- AS 1289.B3.1:1989 Methods of testing soil for engineering purposes - Part B - Soil moisture content tests - Establishment of correlation between a subsidiary method of moisture content determination and the standard method AS 1289.B1.1
- AS 1289.D1.1:1977 Methods of testing soil for engineering purposes - Part D - Soil chemical tests - Determination of the organic matter content of a soil (Standard method)
- AS 1289.C1.1:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the liquid limit of a soil - Oven drying method (standard method)
- BS EN ISO 11274:2014 Soil quality. Determination of the water-retention characteristic. Laboratory methods
- AS 1289.3.8.2:1997 Methods of testing soils for engineering purposes, Method 3.8.2: Soil classification tests - Dispersion - Determination of the percent dispersion of a soil
- AS 1289.C8.3:1984 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the pinhole dispersion classification of a soil
- AASHTO T 310-2011 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- AASHTO T 310-2006 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- AS 1289.5.1.1:1993 Methods of testing soils for engineering purposes, Method 5.1.1: Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort
- AS 1289.5.2.1:1993 Methods of testing soils for engineering purposes, Method 5.2.1: Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using modified compactive effort
- AS 1289.C6.1:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving
- DANSK DS/ISO 11461:2003 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
- AS 1289.C8.1:1980 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the Emerson class number of a soil
- AASHTO T 310-2022 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil–Aggregate by Nuclear Methods (Shallow Depth)
- AS 1289.C8.2:1980 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the percent dispersion of a soil
- AS 1289.6.7.1:1999 Methods of testing soils for engineering purposes, Method 6.7.1: Soil strength and consolidation tests - Determination of permeability of a soil - Constant head method for a remoulded specimen
- AASHTO T 265-2012 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
- AASHTO T 265-2022 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
- CAN/BNQ 2501-170-M86:1986 Soils - Determination of water content
- AASHTO T 265-2015(2019) Standard Method of Test for Laboratory Determination of Moisture Content of Soils
- DANSK DS/EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
- AS 1289.3.6.3:1994 Methods of testing soils for engineering purposes, Method 3.6.3: Soil classification tests - Determination of the particle size distribution of a soil - Standard method of fine analysis using a hydrometer
- AASHTO T 265-1993(2004) Standard Method of Test for Laboratory Determination of Moisture Content of Soils
- DANSK DS/EN ISO 16072:2011 Soil quality - Laboratory methods for determination of microbial soil respiration
- AS 1289.D3.1:1977 Methods of testing soil for engineering purposes - Part D - Soil chemical tests - Determination of the pH value of a soil - Standard method
- UNE 103300:1993 DETERMINATION OF MOISTURE CONTENT OF SOIL BY MEANS OVEN-DRIED.
- AS 1289.C6.3:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the particle size distribution of a soil - Standard method of fine analysis using a hydrometer
- AS 1289.E2.2:1977 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using modified compaction - Subsidiary method
- NS-EN ISO 11274:2019 Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:2019)
- AS 1289.E1.1:1977 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compaction - Standard method
- AASHTO TP 112-2019(2020) Standard Method of Test for Determining In-Place Density and Moisture Content of Soil and Soil-Aggregate Using Complex Impedance Methodology
- AS 1289.E1.2:1977 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compaction - Subsidiary method
- DANSK DS/EN ISO 11274:2019 Soil quality – Determination of the water-retention characteristic – Laboratory methods (ISO 11274:2019)
- AS 1289.C6.2:1977 Methods of testing soil for engineering purposes - Part C - Soil classification tests - Determination of the particle size distribution of a soil - Analysis by sieving in combination with hydrometer analysis (subsidiary method)
- DANSK DS/EN ISO 10930:2013 Soil quality - Measurement of the stability of soil aggregates subjected to the action of water
- BS 7755-3.2:1995 Soil quality. Chemical methods-Determination of pH
- AS 1289.E3.5:1982 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method
- CAN/BNQ 2501-058-M88:1988 Soils - Determination of the Density of Soil in Place Using a Flexible Membrane (Water Volume)
- BS ISO 16072:2002 Soil quality. Laboratory methods for determination of microbial soil respiration
- AASHTO TP 112-2014(2018) Standard Method of Test for Determining In-Place Density and Moisture Content of Soil and Soil-Aggregate Using Complex Impedance Methodology
- NS-EN ISO 11461:2014 Soil quality — Determination of soil water content as a volume fraction using coring sleeves — Gravimetric method (ISO 11461:2001)
- AS 1289.E2.1:1977 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using modified compaction - Standard method
- AS 1289.E8.2:1984 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of field moisture content and field dry density of a soil - Method using a nuclear surface moisture-density gauge - Backscatter mode
- AS 1289.E3.5:1977 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of field dry density of soil - Water replacement method
- AS 1289.D3.2:1977 Methods of testing soil for engineering purposes - Part D - Soil chemical tests - Determination of the pH value of a soil - Colorimetric method (subsidiary method)
- NS-EN ISO 16072:2011 Soil quality — Laboratory methods for determination of microbial soil respiration (ISO 16072:2002)
- AASHTO T 291-1994(2018) Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil
- DANSK DS/ISO 16586:2003 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
- AASHTO T 291-2022 Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil
- AS 1289.E8.1:1984 Methods of testing soil for engineering purposes - Part E - Soil compaction and density tests - Determination of field moisture content and field dry density of a soil - Method using a nuclear surface moisture-density gauge - Direct transmission mode
- AS A89.22A:1973 Methods of testing soils for engineering purposes, Method 22A: Sand equivalent of aggregate and soil using a power-operated shaker
- NS-EN ISO 10930:2013 Soil quality — Measurement of the stability of soil aggregates subjected to the action of water (ISO 10930:2012)
- BS ISO 11269-1:2012 Soil quality. Determination of the effects of pollutants on soil flora. Method for the measurement of inhibition of root growth
- DANSK DS/EN ISO 11276:2014 Soil quality - Determination of pore water pressure - Tensiometer method
- 10/30199146 DC BS ISO 10930. Soil quality. Measurement of the stability of soil aggregates subjected to the action of water
- NS-EN ISO 18311:2018 Soil quality - Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms - Bait-lamina test (ISO 18311:2016)
- DANSK DS/ISO 15800:2019 Soil quality – Characterization of soil with respect to human exposure
Korean Agency for Technology and Standards (KATS)
- KS F 2306-2000 Test method for water content of soils
- KS F 2306-1995 Method of test for moisture content of soils
- KS F 2322-2000 Test methods for permeability of saturated soils
- KS F 2315-2006 Testing method for centrifugal moisture equivalent of soils
- KS F 2306-2015 Test method for water content of soils
- KS F 2315-2021 Testing method for centrifugal moisture equivalent of soils
- KS I ISO 11461-2005(2015) Soil quality-Determination of soil water content calculatedon a volume basis(Gravimetric method)
- KS I ISO 11465:2005 Soil quality-Determination of dry matter and water contenton a mass basis-Gravimetric method
- KS F 2308-2006 Test method for density of soil particles
- KS F 2102-2023 Standard test method for measuring pore water pressures in soils
- KS F 2308-1986 Test method for density of soil particles
- KS F 2103-2003 Testing method for pH of soils
- KS F 2103-2013 Standard test method for pH of soils
- KS F 2305-2000 Test method for liquid parameters of soils
- KS F 2430-1986 Practice for description of soils(visual-manual procedure)
- KS F 2306-2020 Standard test method for water content of soils
- KS I ISO 16586-2009(2019) Soil quality-Determination of soil water content as a volume fraction on the basis of known dry bulk density-Gravimetric method
- KS F 2102-2018 Standard test method for measuring pore water pressures in soils
- KS F 2315-2016 Testing method for centrifugal moisture equivalent of soils
- KS I ISO 16072-2009(2014) Soil quality-Laboratory methods for determination of microbial soil respiration
- KS F 2430-2006 Practice for description of soils(visual-manual procedure)
- KS F 2315-1986 Testing method for centrifugal moisture equivalent of soils
- KS I ISO 11274:2021 Soil quality — Determination of the water-retention characteristic — Laboratory methods
- KS I ISO 16072-2014 Soil quality-Laboratory methods for determination of microbial soil respiration
- KS F 2315-2016(2021) Testing method for centrifugal moisture equivalent of soils
- KS I ISO 16586-2023 Soil quality-Determination of soil water content as a volume fraction on the basis of known dry bulk density-Gravimetric method
- KS F 2311-2001 Test method for soil density by the sand replacement method
- KS F 2593-2014 Standard test method for moisture density of soil
- KS I ISO 11461:2005 Soil quality-Determination of soil water content calculatedon a volume basis(Gravimetric method)
- KS I ISO 11465-2005(2015) Soil quality-Determination of dry matter and water contenton a mass basis-Gravimetric method
- KS F 2104-2008 Testing method of organic matter in soils by ignition loss
- KS I ISO 11274-2005(2015) Soil quality-Determination of the water retention characteristic(Laboratory method)
- KS F 2324-2016 Method of classification of soils for engineering purposes
- KS I ISO 11276:2005 Soil quality-Determination of pore water pressure-Tensiometer method
- KS F 2302-2002 Test method for particle size distribution of soils
- KS F 2104-2013 Standard test method of organic matter contents in soils by ignition loss
- KS F 2102-2003 Method of measurements of pore pressures in soils
- KS F 2324-2016(2021) Method of classification of soils for engineering purposes
- KS F 2324-2006 Method of classification of soils for engineering purposes
- KS I ISO 11274:2005 Soil quality-Determination of the water retention characteristic(Laboratory method)
- KS I ISO 11461:2021 Soil quality — Determination of soil water content as a volume fraction using coring sleeves — Gravimetric method
- KS I ISO 11276:2021 Soil quality — Determination of pore water pressure —Tensiometer method
- KS F 2102-2013 Standard test method of pore water pressures in soils
- KS I ISO 10573:2005 Soil quality-Determination of water content in the unsaturated zone(Neutron depth probe method)
Standard Association of Australia (SAA)
- AS 1289.2.2.1:1998 Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the total suction of a soil - Standard method
- AS 1289.2.1.2:2005 Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Sand bath method (subsidiary method)
- AS 1289.2.1.5:2005 Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Infrared lights method (subsidiary method)
- AS 1289.2.1.1:2005 Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Oven drying method (standard method)
- AS 1289.2.1.6:2005 Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Hotplate drying method
- AS 1289.2.1.4:2005 Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Microwave-oven drying method (subsidiary method)
- AS 1289.3.9.1:2015 Methods of testing soils for engineering purposes, Method 3.9.1: Soil classification tests — Determination of the cone liquid limit of a soil
- AS 1289.2.2.1:1998(R2013) Soil test methods for engineering use. Soil moisture content test. Standard method for determination of total soil suction.
- AS 1289.3.5.1:1995 Methods of testing soils for engineering purposes Method 3.5.1: Soil classification tests-Determination of the soil particle density of a soil-Standard method
- AS 1289.3.8.3:2014 Methods of testing soils for engineering purposes, Method 3.8.3: Soil classification tests — Dispersion — Determination of pinhole dispersion classification of a soil
- AS 1289.4.2.1:1997 Methods of testing soils for engineering purposes - Soil chemical tests - Determination of the sulfate content of a natural soil and the sulfate content of the groundwater - Normal method
- AS 1289.4.2.1:2020 Methods of testing soils for engineering purposes, Method 4.2.1: Soil chemical tests — Determination of the sulfate content of a natural soil and the sulfate content of the groundwater — Normal method
- AS 1289.4.3.1:2021 Methods of testing soils for engineering purposes, Method 4.3.1: Soil chemical tests — Determination of the pH value of a soil — Electrometric method
- AS 1289.3.7.1:2002(R2013) Soil test methods for engineering use. Soil classification test using electric vibrator to determine the sand equivalent of soil.
- AS 1289.4.1.1:2019 Methods of testing soils for engineering purposes, Method 4.1.1: Soil chemical tests — Determination of the organic matter content of a soil — Normal method
- AS 1289.3.2.1:2009 Soil testing methods for engineering use. Soil classification tests. Standard method for determination of plastic limits of soils.
- AS 1289.3.8.3:1997 Methods of testing soils for engineering purposes - Soil classification tests - Dispersion - Determination of pinhole dispersion classification of a soil
- AS 1289.3.8.1:2017 Methods of testing soils for engineering purposes, Method 3.8.1: Soil classification tests — Dispersion — Determination of Emerson class number of a soil
- AS 1289.3.2.1:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the plastic limit of a soil - Standard method
- AS 1289.4.1.1:1997 Methods of testing soils for engineering purposes - Soil chemical tests - Determination of the organic matter content of a soil - Normal method
- AS 1289.3.4.1:2008 Soil Test Methods for Engineering Soil Classification Tests Standard Method for Determination of Linear Shrinkage of Soils
- AS 1289.3.1.2:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the liquid limit of a soil - One point Casagrande method (subsidiary method)
- AS 1289.3.1.1:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the liquid limit of a soil - Four point Casagrande method
- AS 1289.3.6.1:2009 Soil testing methods for engineering use. Standard method for soil classification testing. Determination of soil particle size distribution. Sieve analysis.
- AS 1289.3.6.1:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving
- AS 1289.3.1.1:2009 Soil test methods for engineering use. Soil classification test. Determination of soil liquid limit. Four-point Casagrande method.
- AS 1289.3.1.1:2009/Amdt 1:2015 Soil test methods for engineering use. Soil classification test. Determination of soil liquid limit. Four-point Casagrande method.
- AS 1289.3.1.1:1995/Amdt 1:1998 Soil test methods for engineering use. Soil classification test. Determination of soil liquid limit. Four-point Casagrande method.
- AS 1289.2.3.1:1998(R2013) Soil test methods for engineering purposes: Auxiliary methods and standard methods for establishing correlations in soil moisture content tests
- AS 1289.3.1.2:2009 Soil test methods for engineering Soil classification test Determination of soil liquid limit One-point Casagrande method (auxiliary method)
- AS 1289.2.3.1:1998/Amdt No. 1:1999 Soil test methods for engineering purposes: Auxiliary methods and standard methods for establishing correlations in soil moisture content tests
- AS 1289.3.5.2:2002(R2013) Soil test methods for engineering use Soil classification test
- AS 1289.3.3.1:2009 Soil test methods for engineering use Soil classification test Calculation of soil plasticity index
- AS 1289.5.3.5:1997 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method
- AS 1289.4.3.1:1997 Methods of testing soils for engineering purposes - Soil chemical tests - Determination of the pH value of a soil - Electrometric method
- AS 1289.6.7.3:2016 Methods of testing soils for engineering purposes, Method 6.7.3: Soil strength and consolidation tests-Determination of permeability of a soil-Constant head method using a flexible wall permeameter
- AS 1289.4.4.1:2017 Methods of testing soils for engineering purposes, Method 4.4.1: Soil chemical tests — Determination of the electrical resistivity of a soil — Method for fine granular materials
- AS 1289.3.1.2:2009/Amdt 1:2015 Soil test methods for engineering Soil classification test Determination of soil liquid limit One-point Casagrande method (auxiliary method)
- AS 1289.5.8.7:1998(R2013) Soil Testing Methods for Engineering Soil Compaction and Density Testing Nuclear Surface Moisture Densitometers Water Content of Standard Moisture Blocks Using Components Hydrogen Content
- AS 1289.5.8.1:1995 Methods of testing soils for engineering purposes Method 5.8.1: Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-density gauge - Direct transmission mode
- AS 1289.5.8.8:1998(R2013) Soil Testing Methods for Engineering Soil Compaction and Density Testing Nuclear Surface Moisture Densitometers Moisture Content of Standard Moisture Blocks Using Water Ratios
- AS 1289.3.6.3:2020 Methods of testing soils for engineering purposes, Part 3.6.3: Soil classification tests — Determination of the particle size distribution of a soil — Standard method of fine analysis using an hydrometer
- AS 1289.5.3.5:1997(R2013) Soil testing methods for engineering use. Soil compaction and density tests. Determination of soil field dry density. Water displacement method.
- AS 1289.3.3.1:1995 Methods of testing soils for engineering purposes - Soil classification tests - Calculation of the plasticity index of a soil
- AS 1289.3.4.1:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the linear shrinkage of a soil - Standard method
- AS 1289.4.4.1:1997 Methods of testing soils for engineering purposes - Soil chemical tests - Determination of the electrical resistivity of a soil - Method for sands and granular materials
- AS 1289.2.3.1:1998 Methods of testing soils for engineering purposes - Soil moisture content tests - Establishment of correlation - Subsidiary method and the standard method
- AS 1289.3.3.2:2009 Soil test methods for engineering use. Calculation of soil cone plasticity index for soil classification tests.
- AS 1289.5.8.9:1998(R2013) Soil Testing Methods for Engineering Soil Compaction and Density Testing Nuclear Surface Moisture Densitometer Moisture Content of Standard Moisture Blocks Comparison with Primary Blocks
- AS 1289.6.4.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water p
- AS 1289.3.3.2:1995 Methods of testing soils for engineering purposes - Soil classification tests - Calculation of the cone plasticity index of a soil
US-FCR
- FCR COE ETL 1110-2-323-1991 SELECTION OF METHODS FOR SOIL MOISTURE MEASUREMENT
- FCR COE CRD-C 655-95-1995 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR DETERMINING THE MODULUS OF SOIL REACTION
NZ-SNZ
- NZS 4402.2.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.1: Determination of the Water Content
- NZS 4402.5.1.4:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.4: Immersion in Water Method
- NZS 4402.2.7.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.7: Soil Classification Tests - Determination of the Solid Density of Soil Particles Test 2.7.1: Method for Coarse, Medium and Fine Soils
- NZS 4402.5.1.5:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.5: Water Displacement Method
- NZS 4402.2.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.2: Determination of the Liquid Limit
- NZS 4402.2.7.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests - Determination of the Solid Density of Soil Particles Test 2.7.2: Method for Medium and Fine Soils
- NZS 4402.2.3:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.3: Determination of the Plastic Limit
- NZS 4402.2.8.4:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle-Size Distribution Test 2.8.4: Subsidiary Method for Fine Soils (Hydrometer Method)
- NZS 4402.2.8.3:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle-Size Distribution Test 2.8.3: Standard Method for Fine Soils (Pipette Method)
- NZS 4402.2.4:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.4: Determination of the Plasticity Index
- NZS 4402.2.8.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle-Size Distribution Test 2.8.1: Standard Method by Wet Sieving
- NZS 4402.6.2.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 6.2: Soil Strength Tests - Determination of the Compressive Strength of Specimens Tested in Undrained Triaxial Compression Test 6.2.1: Method without Measurement of Pore Water Pressure
- NZS 4402.2.6:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.6: Determination of the Linear Shrinkage
- NZS 4402.2.5:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.5: Determination of the Cone Penetration Limit
RU-GOST R
- GOST R 51657.2-2000 Water flow measurement in hydromelioration and water economics systems. Methods of water flow measurement. Classification
- GOST R 59537-2021 Soils. Method for determination of unfrozen water content
- GOST 26428-1985 Soils. Methods for determination of calcium and magnesium in water extract
- GOST 26427-1985 Soils. Method for determination of sodium and potassium in water extract
- GOST 26107-1984 Soils. Methods for determination of total nitrogen
- GOST 26426-1985 Soils. Methods for determination of sulphate ion in water extract
- GOST 26425-1985 Soils. Methods for determination of chloride ion in water extract
- GOST 26950-1986 Soils. Method for determination of exchangeable sodium
- GOST 27753.12-1988 Greenhouse grounds method for determination of water-soluble sodium
- GOST 27753.6-1988 Greenhouse grounds. Methods for determination of watersoluble potassium
- GOST 27753.5-1988 Greenhouse grounds. Method for determination of water-soluable phosphorus
- GOST 26484-1985 Soils. Method for determination of exchangeable acidity
- GOST 26261-1984 Soils. Methods for determining total phosphorus and total potassium
- GOST R 53764-2009 Soil quality. Determination of soil water content as a volume fraction using coring sleeves. Gravimetric method
- GOST 26951-1986 Soils. Determination of nitrate byionometric method
- GOST 27821-1988 Soils. Determination of base absorption sum by Kappen method
- GOST R 51657.3-2000 Water flow measurement in hydromelioration and water economics system. Flow gauging structures. Classification
- GOST 26423-1985 Soils. Methods for determination of specific electric conductivity, pH and solid residue of water extract
- GOST 27784-1988 Soils. Method for determination of ash content in peat and peat-containing soil horizonts
- GOST 27753.9-1988 Greenhouse crounds method for determination of water-soluble calcium and magnesium
- GOST 26262-2014 Soils. Soils field methods for determining depth of thawing
- GOST 26212-2021 Soils. Determination of hydrolytic acidity by Kappen method modified by CINAO
- GOST 26212-1991 Soils. Determination of hydrolytic acidity by Kappen method modified by CINAO
- GOST 26424-1985 Soils. Method for determination of carbonate and bicarbonate ions in water extract
- GOST R 59539-2021 Soils. Groundwater sampling methods
Association Francaise de Normalisation
- NF X31-019*NF ISO 20244:2018 Soil quality - On-site test method to quickly determine gravimetric water contents in soil by refractometry
- NF X31-505:1992 Soil quality - Physical methods - Method for determining the bulk volume and the water content of lumps of earth
- NF ISO 20244:2018 Soil quality - Diagnostic method applicable to water content - Determination by refractometry
- NF X31-551*NF EN ISO 11274:2019 Soil quality - Determination of the water-retention characteristic - Laboratory methods
- NF EN ISO 11461:2014 Soil quality - Determination of soil water content in volume fraction, using corers - Gravimetric method
- NF X31-501:1992 Soil quality - Physical methods - Measurement of the apparent density of an undisturbed soil sample - Cylinder method.
- NF ISO 16586:2003 Soil quality - Determination of the volumetric water content of the soil from the known dry apparent density - Gravimetric method
- NF EN ISO 11276:2014 Soil quality - Determination of water pressure in pores - Tensiometer method
- NF X31-604*NF ISO 15800:2020 Soil quality - Characterization of soil with respect to human exposure
- NF X31-509:1993 Soil quality - Method of installing a piezometer in the ground for agropedological purposes
- NF X31-233:2020 Soil quality - Determination of the effects of pollutants on soil flora - Laboratory method for determining the composition of foliar fatty acids to assess soil quality
- NF X31-551:2014 Soil quality - Determination of the water-retention characteristic - Laboratory methods
- NF X31-551:1998 Soil quality - Determination of the water-retention characteristic - Laboratory methods.
- NF X31-601:2011 Soil quality - Characterization of soil related to groundwater protection.
- NF EN ISO 18311:2018 Qualité du sol - Méthode pour tester les effets des contaminants du sol sur l'activité alimentaire des organismes vivant dans le sol - Test Bait-lamina
BELST
- STB 2005-2009 Soils. Methods for measuring of water capillary raising
GOST
- GOST R 71044-2023 Soils. Methods for determining the solubility of soils in water
Japanese Industrial Standards Committee (JISC)
- JIS A 1203:1999 Test method for water content of soils
- JIS A 1203:2009 Test method for water content of soils
- JIS A 1203:1995 Test method for water content of soils
- JIS A 1207:1990 Test method for centrifuge moisture equivalent of soils
- JIS A 1218:1993 Test methods for permeability of saturated soils
IN-BIS
- IS 2720 Pt.1-1983 Soil Testing Methods Part 1 Preparation of Dry Soil Samples for Various Tests
- IS 2720 Pt.9-1971 Soil Test Methods Part Ⅸ Determination of Soil Dry Density-Moisture Content Relationship Soil Constant Weight Method
- IS 2720 Pt.2-1973 Soil Test Methods Part II Determination of Moisture Content
- IS 4332 Pt.2-1967 Test Methods for Stabilized Soils Part II Determination of Moisture Content of Stabilized Soil Mixtures
- IS 2720 Pt.9-1992 Soil Test Methods Part 9 Determination of Dry Density-Moisture Content Relationship by Soil Constant Mass Method
- IS 2720 Pt.41-1977 Soil Test Methods Part XL Measurement of Soil Swelling Pressure
- IS 2720 Pt.18-1964 Soil Test Methods Part XVIII Determination of Field Water Equivalent
- IS 2720 Pt.19-1964 Soil Test Methods Part XIX Determination of Centrifugal Moisture Equivalent
- IS 2720 Pt.35-1974 Soil Test Methods Part XXXXX Measurement of Negative Pore Water Pressure
- IS 10629-1983 Method for determination of aldicarb residues in crops, soil and water
- IS 10630-1983 Method for determination of aldicarb residues in crops, soil and water
- IS 11020-1984 Determination method of carbofuran residues in crops, soil and water
- IS 2720 Pt.37-1976 Soil Test Methods Part XXXXX Determination of Sand Equivalent Values of Soils and Fine Aggregates
British Standards Institution (BSI)
- BS ISO 20244:2018 Soil quality. Screening method for water content. Determination by refractometry
- BS EN ISO 11274:2019 Soil quality. Determination of the water-retention characteristic. Laboratory methods
- BS ISO 11274:1998 Soil quality. Determination of the water retention characteristic. Laboratory methods
- BS ISO 11274:1999 Soil quality. Determination of the water-retention characteristic. Laboratory methods
- BS EN ISO 10930:2013 Soil quality. Measurement of the stability of soil aggregates subjected to the action of water
- BS 7755-3.1:1994 Soil quality. Chemical methods. Determination of dry matter and water content on a mass basis by a gravimetric method
- BS 7755-5.2:1996 Soil quality. Physical methods. Determination of water content in the unsaturated zone. Neutron depth probe method
- BS EN ISO 18311:2018 Soil quality. Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms. Bait-lamina test
- BS ISO 15800:2019 Soil quality. Characterization of soil with respect to human exposure
- BS EN ISO 16072:2011 Soil quality. Laboratory methods for determination of microbial soil respiration
- BS EN ISO 11461:2014 Soil quality. Determination of soil water content as a volume fraction using coring sleeves. Gravimetric method
- 24/30463824 DC BS ISO 18386 Soil quality - Screening method for soil temperature - Measurement by IR thermometer
- BS 7755-3.11:1995 Soil quality. Chemical methods. Determination of water-soluble and acid-soluble sulfate
- BS 7755-5.6:1999 Soil quality - Physical methods - Determination of dry bulk density
- BS 7755 SubSec.4.3.1:1994 Soil quality. Biological methods. Effects of pollutants on soil flora. Method for the measurement of inhibition of root growth
- BS 7755-5.1:1996 Soil quality - Physical methods - Determination of pore water pressure - Tensiometer method
- BS 7755-3.9:1995 Soil quality. Chemical methods. Extraction of trace elements soluble in aqua regia
- BS EN ISO 11276:2014 Soil quality. Determination of pore water pressure. Tensiometer method
International Organization for Standardization (ISO)
- ISO 20244:2018 Soil quality - Screening method for water content - Determination by refractometry
- ISO 11465:1993 Soil quality; determination of dry matter and water content on a mass basis; gravimetric method
- ISO 11274:2019 Soil quality — Determination of the water-retention characteristic — Laboratory methods
- ISO 10573:1995 Soil-quality - Determination of water content in the unsaturated zone - Neutron depth probe method
- ISO/CD 18386 Soil quality — Screening method for soil temperature — Measurement by IR thermometer
- ISO 11465:1993/Cor 1:1994 Soil quality; determination of dry matter and water content on a mass basis; gravimetric method; technical corrigendum 1
- ISO 11461:2001 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
- ISO 11276:1995 Soil quality - Determination of pore water pressure - Tensiometer method
- ISO 11274:1998 Soil quality - Determination of the water-retention characteristic - Laboratory methods
- ISO 11063:2012 Soil quality - Method to directly extract DNA from soil samples
Indonesia Standards
- SNI 1965-2008 Testing methods for water content of soils
- SNI 13-4719-1998 Methods for moisture determination of soils
- SNI 13-4720-1998 Methods for determination of organic carbon content in soils
American Society for Testing and Materials (ASTM)
- ASTM D2216-71 Standard Method of Laboratory Determination Of Moisture Content Of Soil
- ASTM D427-04 Test Method for Shrinkage Factors of Soils by the Mercury Method
- ASTM D6938-17a Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- ASTM D6938-17 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- ASTM D6938-06e1 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- ASTM D6938-07a Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- ASTM D6938-23 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- ASTM D6938-07b Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- ASTM D6938-07 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- ASTM D7664-10(2018)e1 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
- ASTM D4643-08 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating
- ASTM D7664-10 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
- ASTM D4643-00 Standard Test Method for Determination of Water (Moisture) Content of Soil by the Microwave Oven Method
- ASTM D2434-22 Standard Test Methods for Measurement of Hydraulic Conductivity of Coarse-Grained Soils
- ASTM D6938-17ae1 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- ASTM D6938-08 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- ASTM D6938-15 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- ASTM D4959-24 Standard Test Method for Determination of Water Content of Soil By Direct Heating
- ASTM D7830/D7830M-14(2021)e1 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
- ASTM D6938-08a Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- ASTM G187-18 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
- ASTM D4959-00 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating
- ASTM D4959-07 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating
- ASTM G187-12a Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
- ASTM G187-12 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
- ASTM D7830/D7830M-14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
- ASTM D6758-18e1 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
- ASTM D7830/D7830M-13 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
- ASTM D4944-04 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
- ASTM D6565-00(2005) Standard Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method
- ASTM D6565-00 Standard Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method
- ASTM D4959-16 Standard Test Method for Determination of Water Content of Soil By Direct Heating
- ASTM D427-98 Test Method for Shrinkage Factors of Soils by the Mercury Method
- ASTM D4944-18 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
- ASTM D6758-18 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
- ASTM D3017-96e1 Standard Test Method for Water Content of Soil and Rock in Place by Nuclear Methods (Shallow Depth)
- ASTM D2216-98 Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
- ASTM D6780-05 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
- ASTM D1140-00 Standard Test Methods for Amount of Material in Soils Finer Than the No. 200 (75-um) Sieve
- ASTM D1140-00(2006) Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-956;m) Sieve
- ASTM D6780-02 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
- ASTM D8153-22 Standard Test Method for Determination of Soil Water Contents Using a Dielectric Permittivity Probe
- ASTM D2216-19 Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
HU-MSZT
- MSZ 18094/11-1979 Soil corrosion testing. Soil and soil moisture content testing
- MNOSZ 15231-1954 R soil water level measurement
ES-UNE
- UNE-EN ISO 11274:2019 Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:2019) (Endorsed by Asociación Española de Normalización in November of 2019.)
- UNE-EN ISO 16072:2011 Soil quality - Laboratory methods for determination of microbial soil respiration (ISO 16072:2002) (Endorsed by AENOR in August of 2011.)
- UNE-EN ISO 10930:2013 Soil quality - Measurement of the stability of soil aggregates subjected to the action of water (ISO 10930:2012) (Endorsed by AENOR in April of 2013.)
- UNE-EN ISO 18311:2018 Soil quality - Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms - Bait-lamina test (ISO 18311:2016) (Endorsed by Asociación Española de Normalización in April of 2018.)
- UNE-EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method (ISO 11461:2001) (Endorsed by AENOR in May of 2014.)
German Institute for Standardization
- DIN EN ISO 11274:2020-04 Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:2019); German version EN ISO 11274:2019
- DIN EN ISO 16072:2011-09 Soil quality - Laboratory methods for determination of microbial soil respiration (ISO 16072:2002); German version EN ISO 16072:2011
- DIN EN ISO 11461:2014-07 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method (ISO 11461:2001); German version EN ISO 11461:2014
- DIN ISO 16586:2012-05 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method (ISO 16586:2003 + Cor. 1:2009)
- DIN 19687:2011-08 Soil quality - Percolation rate of water from the soil
- DIN 19687:2011 Soil quality - Percolation rate of water from the soil
- DIN EN ISO 11274:2020 Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:2019)
- DIN EN ISO 10930:2013-05 Soil quality - Measurement of the stability of soil aggregates subjected to the action of water (ISO 10930:2012); German version EN ISO 10930:2013
- DIN EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method (ISO 11461:2001); German version EN ISO 11461:2014
- DIN 19707:2004 Soil quality - Classification of the nutrient supply conditions of soil
- DIN 18121-2:2020-11 Soil, investigation and testing - Water content - Part 2: Determination by rapid methods
- DIN EN ISO 11276:2014-07 Soil quality - Determination of pore water pressure - Tensiometer method (ISO 11276:1995), German version EN ISO 11276:2014
VN-TCVN
- TCVN 5299-2009 Soil quality.Method for the determination of soil erosion by rain
- TCVN 4404-1987 Cultivated soil.Methods for determination of hydrolytic acidity
- TCVN 4196-2012 Soils.Laboratory methods for determination of moisture and hydroscopic water amount
- TCVN 4053-1985 Soil.Method for the determination of total potassium
KR-KS
- KS F 2306-2020(英文版) Standard test method for water content of soils
- KS F 2102-2018(2023) Standard test method for measuring pore water pressures in soils
- KS I ISO 11274-2021 Soil quality — Determination of the water-retention characteristic — Laboratory methods
- KS I ISO 11461-2021 Soil quality — Determination of soil water content as a volume fraction using coring sleeves — Gravimetric method
- KS I ISO 11276-2021 Soil quality — Determination of pore water pressure —Tensiometer method
GSO
- GSO ISO 11274:2013 Soil quality -- Determination of the water-retention characteristic -- Laboratory methods
- OS GSO ISO 11274:2013 Soil quality -- Determination of the water-retention characteristic -- Laboratory methods
- BH GSO ISO 11274:2016 Soil quality -- Determination of the water-retention characteristic -- Laboratory methods
- GSO ISO 11276:2013 Soil quality - Determination of pore water pressure - Tensiometer method
- BH GSO ISO 10930:2016 Soil quality -- Measurement of the stability of soil aggregates subjected to the action of water
- BH GSO ASTM D2216:2023 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
- GSO ASTM D2216:2022 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
- OS GSO ISO 11461:2013 Soil quality -- Determination of soil water content as a volume fraction using coring sleeves -- Gravimetric method
- BH GSO ISO 11461:2016 Soil quality -- Determination of soil water content as a volume fraction using coring sleeves -- Gravimetric method
- GSO ISO 14240-1:2013 Soil quality - Determination of soil microbial biomass - Part 1: Substrate-induced respiration method
- OS GSO ISO 11063:2013 Soil quality - Method to directly extract DNA from soil samples
- GSO ISO 11063:2013 Soil quality - Method to directly extract DNA from soil samples
- GSO ISO 10930:2013 Soil quality -- Measurement of the stability of soil aggregates subjected to the action of water
- BH GSO ISO 11276:2016 Soil quality - Determination of pore water pressure - Tensiometer method
- BH GSO ISO 16586:2016 Soil quality -- Determination of soil water content as a volume fraction on the basis of known dry bulk density -- Gravimetric method
- OS GSO ISO 11465:2013 Soil quality -- Determination of dry matter and water content on a mass basis -- Gravimetric method
- GSO ISO 11465:2013 Soil quality -- Determination of dry matter and water content on a mass basis -- Gravimetric method
- GSO ISO 18311:2017 Soil quality -- Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms -- Bait-lamina test
- OS GSO ISO 11276:2013 Soil quality - Determination of pore water pressure - Tensiometer method
Danish Standards Foundation
- DS/ISO 11274:1999 Soil quality - Determination of the water-retention characteristics - Laboratory methods
- DS/ISO 11274/Corr. 1:2009 Soil quality - Determination of the water-retention characteristic - Laboratory methods
- DS/EN ISO 16072:2011 Soil quality - Laboratory methods for determination of microbial soil respiration
- DS/EN ISO 10930:2013 Soil quality - Measurement of the stability of soil aggregates subjected to the action of water
- DS/ISO 11461:2003 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
- DS/ISO 15800:2004 Soil quality - Characterization of soil with respect to human exposure
- DS/ISO 11276:1997 Soil quality - Determination of pore water pressure - Tensiometer method
- DS/EN ISO 11063:2013 Soil quality - Method to directly extract DNA from soil samples
The American Road & Transportation Builders Association
- AASHTO T 310-2013 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- AASHTO T 399-2022 Standard Method of Test for Determining In-Place Density and Moisture Content of Soil and Soil– Aggregate Using Complex Impedance Methodology
- AASHTO T 310-2019 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil–Aggregate by Nuclear Methods (Shallow Depth)
- AASHTO T 310-2010 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- AASHTO TP 112-2014 Standard Method of Test for Determining In-Place Density and Moisture Content of Soil and Soil- Aggregate Using Complex Impedance Methodology
- AASHTO TP 112-2021 Standard Method of Test for Determining In-Place Density and Moisture Content of Soil and Soil-Aggregate Using Complex Impedance Methodology
- AASHTO T 265-2015 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
- AASHTO T 265-2015(R2019) Standard Method of Test for Laboratory Determination of Moisture Content of Soils
- AASHTO T 265-1993 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
- AASHTO T 291-94(R2018) Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil
- AASHTO T 310-2002 Standard Specification for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) HM-22; Part IIA
- AASHTO T 252-1996 Standard Method of Test for Measurements of Pore Pressures in Soils
AASHTO - American Association of State Highway and Transportation Officials
- T 310-2013 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- T 310-2011 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- T 310-2010 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- T 265-1993 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
- TP 112-2014 Standard Method of Test for Determining In-Place Density and Moisture Content of Soil and Soil-Aggregate Using Complex Impedance Methodology
- T 265-2012 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
- T 310-2003 Standard Specification for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- T 310-2006 Standard Specification for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- T291-1994 Standard Method of Test for Determining Water Soluble Chloride Ion Content in Soil
- T 291-1994 Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil
Lithuanian Standards Office
- LST 1360.3-1995 Soils for road construction. Testing methods. Determination of water content
- LST EN ISO 16072:2011 Soil quality - Laboratory methods for determination of microbial soil respiration (ISO 16072:2002)
- LST 1360.8-1995 Soils for road construction. Testing methods. Determination of water permeability
CEN - European Committee for Standardization
- EN ISO 15175:2018 Soil quality - Characterization of contaminated soil related to groundwater protection
AT-ON
- ONORM L 1069-1988 Physical analysis of soils; determination of field capacity of soils
GOSTR
- GOST 27821-2020 Soils. Determination of base absorption sum by Kappen method
European Committee for Standardization (CEN)
- EN ISO 15175:2011 Soil quality - Characterization of soil related to groundwater protection (ISO 15175:2004)
- EN ISO 11276:2014 Soil quality - Determination of pore water pressure - Tensiometer method
- DD ENV 196 (PART 4)-1989 Methods of Testing Cement: Quantitative Determination of Constituents
- EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
NL-NEN
- NEN 5748-1990 Soil - Determination of moisture content and dry matter content of air-dry soil
- NEN 5747-1990 Soil - Determination of moisture content and dry matter content of not prepared soil
RO-ASRO
- STAS 7184/9-1979 SOILS Determination of moisture content
AENOR
- UNE-ISO 15800:2008 Soil quality -- Characterization of soil with respect to human exposure.
- UNE-ISO 16586:2006 Soil quality -- Determination of soil water content as a volume fraction on the basis of known dry bulk density -- Gravimetric method (ISO 16586:2003)
DIN
- DIN ISO 11274:2001 Soil quality - Determination of the water retention characteristics - Laboratory methods (ISO 11274:1998)
- DIN ISO 16072:2005 Soil quality - Laboratory methods for determination of microbial soil respiration (ISO 16072:2002)
YU-JUS
- JUS U.B1.012-1979 Testing of soils. Determination of soil moisture content