Marine oxygen and explosion detector detection cycle
Marine oxygen and explosion detector detection cycle, Total:213 items.
The international standard classification for "Marine oxygen and explosion detector detection cycle" includes: Laboratory ware and related apparatus , Acoustics and acoustic measurements , Geology. Meteorology. Hydrology , Non-destructive testing , Chemical analysis , Explosives. Pyrotechnics , Navigation and control equipment , Earth-moving machinery , Marine engines and propulsion systems , Mining and quarrying , Diagnostic equipment , Product and company certification. Conformity assessment , Veterinary medicine , Tobacco, tobacco products and related equipment .
The Chinese standard classification for "Marine oxygen and explosion detector detection cycle" includes: Chemical Measurement , Ionizating Radiation Measurement , Acoustic Measurement , Oceanographic instrumentation , X ray, magnetic powder, fluorescent light and other defectoscope , Electrochemical, thermochemistry and optical profile type analyzer , Hydrology and water conservancy instrument , Artistic handicrafts , Radar, navigation equipment and system , Architectural engineering construction machinery , Basic standards and general methods , Ultrasonic wave and sound radiation defectoscope , Deck machinery , Drug testing instrument , Fishery machinery and tools , Medical apparatus and devices in general , Standardization and Quality Management , Veterinary and animal husbandry, veterinary appliance , Environmental monitoring instrument and its complete equipment , Electronic manufacturing industry engineering , Tobacco curing in general .
National Metrological Verification Regulations of the People's Republic of China
- JJG 990-2004 Verification Regulation for Acoustic Detector
- JJG 291-2018 Dissolved Oxygen Meters
- JJG(煤炭) 10-1998 Verification Regulation of Oxygen Detector
- JJG 291-2008 Dissolved Oxygen Meter with Covered-Membrane-Electrode
- JJG 291-1999 Film Electrode Dissolved Oxygen Meter
- JJG 1060-2010 Low-level Dissolved Oxygen Meters
- JJG 975-2002 Verification Regulation of Chemical Oxygen Demand (COD) Meters
- JJG(烟草)33-2024 Calibration procedures for cigarette burst strength tester
- JJG 852-1993 Neutron Ambient Dose Equivalent Meter
- JJG 393-2018 Portable Ambient Dose Equivalent(Rate) Meters and Monitors for X and gamma Radiations
- JJG(煤炭) 11-1998 Verification Regulation of Methane-Oxygen Detector
- JJG 551-2021 Sulfur Dioxide Gas Detectors
- JJG 365-2008 Verification Regulation of Electrochemical Oxygen Meter
- JJG(煤炭) 12-1998 Verification Regulation of Methane-Carbon Monoxide Detector
- JJG 551-2003 Sulfur Dioxide Gas Detectors
- JJG(煤炭) 09-1998 Verification Regulation of Carbon Monoxide Detector
Professional Standard - Ocean
- HY/T 096-2007 Test method of seawater dissolved oxygen analyzer
- HY/T 144-2011 Automatic weather station for VOS
工业和信息化部
- JB/T 13941-2020 Nondestructive testing instrument - Remote-field eddy current testing equipment
- JB/T 13935-2020 Nondestructive testing instrument - UltrasonicUltrasonic time-of-flight diffraction testing instrument
- JB/T 13940-2020 Nondestructive instruments - Eddy current electrical conductivity gauge
- JB/T 13937-2020 Nondetructive testing instrument -Laser ultrasonic visualizing inspector
- JB/T 13939-2020 Nondestructive testing instruments - Eddy current thickness gauge
- JB/T 20201-2021 Vapourous hydrogen peroxide concentration detector
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 9030-1988 Performance requirements for shipborne radio direction finder
- GB/T 3412.1-2009 Instrument for dam monitoring—Readout unit—Part 1:Readout unit for vibrating wire type transducer
- GB/T 26595-2011 Non-destructive testing instruments—Specification for panoramic X-ray tube
- GB/T 14917-1994 Earth-oving machinery-Service instrumentation
- GB/T 19904-2005 Electrochemical oxygenmeter for medical hyperbaric oxygen chamber
- GB/T 41655-2022 Non-destructive testing—Ultrasonic testing—Technique of testing claddings produced by welding, rolling and explosion
- GB/T 27669-2011 Non-destructive testing - Ultrasonic inspection - Evaluating electronic characteristics of ultrasonic test instruments
- GB/T 26832-2011 Non-destructive testing instruments - Specifications for the wire rope electromagnetic tester
- GB/T 41644-2022 Fireworks and firecrackers—Inspection and testing method
Professional Standard-Ships
- CB 3410-1991 Remote Measuring Torque Gauge for Ships
Professional Standard - Machinery
- JB/T 20156-2013 Particle counter
- JB/T 11260-2011 Non-destructive testing instruments — Acoustic pulse reflectometry instrument
- JB/T 11612-2013 Non-destructive testing instrument — Eddy current and magnetic flux leakage integrated testing instrument
- JB/T 11604-2013 Non-destructive testing instruments — Ultrasonic thickness gauge
- JB/T 11609-2013 Non-destructive testing instrument - Acoustic impact testing instrument
- JB/T 11259-2011 Non-destructive testing instrument —Multifrequency eddy current testing equipment
- JB/T 11277-2012 Non-destructive testing instruments — Single channel acoustic impedance instrument
- JB/T 11610-2013 Non-destructive testing instrument — Specifications for digital ultrasonic testing instruments
- JB/T 12455-2015 Nondestructive testing instruments―Swept frequency eddy current testing instrument
- JB/T 12456-2015 Non-destructive testintg instruments-Technical requirements of X-ray delector for circuit board detection
- JB/T 11780-2014 Non-destructive Testing Instrument - Characterization and Verification of Array Eddy Current Testing Instrument
- JB/T 11611-2013 Non-destructive testing instrument — Eddy current and magnetic memory integrated testing instrument
- JB/T 12458-2015 Non-destructive testing instruments - - Multi-channel digital ultrasonic testing instrument
- JB/T 12454-2015 Nondestructive testing instruments-Swept frequency acoustical testing instrument
- JB/T 11601-2013 Non-destructive testing instrument - Visual testing Equipment
- JB/T 12457-2015 Non-destructive testing instruments-Testing method of X-ray delector for circuit board detection
- JB/T 5525-2011 Non-destructive testing instruments —characteristics measured method for one-channel eddy current testing instrument
工业和信息化部/国家能源局
- JB/T 20185-2017 Pyrogen tester
- JB/T 13150-2017 Nondestructive testing instrument. Variable array probe for eddy current testing instrument
Professional Standard - Environmental Protection
- HJ 925-2017 Technical requirement and test procedures for portable dissolved oxygen meter
National Metrological Technical Specifications of the People's Republic of China
- JJF 1822-2020 Calibration Specification for Urea Analyzers of Water Sample Detection
- JJF 1873-2020 Calibration Specification for Diesel Vehicle Nitrogen Oxides(NOx) Measuring Instruments
- JJF 1364-2012 Program of Pattern Evaluation of Sulfur Dioxide Gas Detectors
Professional Standard - Aviation
- HB 7407-1996 Minimum performance requirements for civil aircraft carbon monoxide detectors
Military Standard of the People's Republic of China-General Armament Department
- GJB 3186-1998 General specifications for gamma radiation monitors for use on ships
- GJB 9828-2020 Specifications for test instruments for pilots' ability to withstand stress and hypoxia
- GJB 3186A-2021 General specifications for radiation monitors for use on ships
未注明发布机构
- ANSI/ISA TR92.06.03-2008(2013) Feasibility of Chlorine Detection Instrument Testing
- ANSI/ISA 92.04.01 Part 1-2007(2013) Part I–1996 Performance Requirements for Instruments Used to Detect Oxygen-Deficient/ Oxygen-Enriched Atmospheres
Professional Standard - Petroleum
- SY/T 6274-1997 Testing method of detonating cord for oil and gas well
Professional Standard - Aquaculture
- SC/T 7006-2001 Dissolved oxygen meter
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会
- GB/T 33887-2017 Non-destructive testing instruments--Industrial optical fiber endoscope detector
- GB/T 33886-2017 Non-destructive testing instruments--Industrial electronic endoscopic detector
Professional Standard - Medicine
- YY/T 0841-2023 Medical electrical equipment---Recurrent test and test after repair ofmedical electrical equipment
- YY/T 0841-2011 Medical electrical equipment—Recurrent test and test after repair of medical electrical equipment
国家认证认可监督管理委员会
- RB/T 143-2018 Guidance for intermediate checks of chemical testing instrument and equipment
Professional Standard - Agriculture
- NY/T 1349-2007 Ultrasonic Instrument for Testing Animal Pregnancy
国家市场监督管理总局、中国国家标准化管理委员会
- GB/T 39849-2021 Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Methods of performance tests
Group Standards of the People's Republic of China
- T/GDCKCJH 065-2022 Performance requirements and test methods for DC parameter testers of zinc oxide lightning arrester
- T/CAS 243-2015 Reference Fuel for Marine Diesel Engine Performance Test
- T/CSTM 00337-2021 Detonation velocity test in borehole for industrial explosive—Timer method
- T/NMRJ 002-2023 Code for installation and use of mine explosion-proof doors (covers)?
Professional Standard - Coal
- MT 275-1994 Detector Tube for Oxygen
- MT/T 523-1995 Explosion-proof low-energy γ-γ combined logging tool
- MT 523-1995 Explosion Protective Low-energy r-r Combined Logging Tool
Professional Standard - Tobacco
- YC/T 608-2024 General technical conditions for the cigarette capsule-strength instrument
Korean Agency for Technology and Standards (KATS)
- KS V 0924-2013 Oil-water interface detectors for marine use
- KS E 4920-2013 Digital oxygen detector
- KS R 3033-2013 Simplified carbonmonoxide testers for automobiles
- KS C 6594-2023 Performance requirements for instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
- KS E 4112-2013 Detector tube type carbon monoxide measuring instruments(Colour-intensity)
- KS C 6594-2007(2018) Performance requirements for instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
- KS V ISO 12133-2023 Small craft - Carbon monoxide (CO) detection systems
- KS V 3623-1987 SHIPS' CLINOMETER
- KS V 3623-2003(2011) SHIPS' CLINOMETER
- KS V 3623-1982 SHIPS' CLINOMETER
- KS C 6595-2023 Installation, operation and maintenance of instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
- KS C 6595-2007(2018) Installation, operation and maintenance of instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
- KS D ISO 9305-2002(2017) Seamless steel tubes for pressure purposes-Full peripheral ultrasonic testing for the detection of transverse imperfections
- KS A IEC 60605-2:2002 Equipment reliability testing-Part 2:Design of test cycles
- KS C IEC 60910:2009 Containment monitoring instrumentation for early detection of developing deviations from normal operation in light water reactors
- KS A IEC 60605-2-2022 Equipment reliability testing-Part 2:Design of test cycles
- KS C 6597-2023 Installation, operation and maintenance of carbon monoxide detection instruments
- KS C 6597-2007(2018) Installation, operation and maintenance of carbon monoxide detection instruments
- KS I 2218-2009 Detector tube type gas measuring instruments
RU-GOST R
- GOST ISO 9918-2012 Capnometers for use with humans. Requirements
- GOST R ISO 9918-1999 Capnometers for use with humans. Requirements
- GOST 30574-1998 Internal combustion reciprocating engines. Emissions and diesel smoke. Test cycles
- GOST 8.518-1984 State system for ensuring the uniformity of measurements. Ferritometers for austenite steel. Methods of verification
- GOST R 54172-2010 Sealed insulating glass units. Method of life cycle determination
- GOST R IEC 62353-2013 Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment
HU-MSZT
- MSZ 9721/5-1984 Lifting machinery is inspected regularly. Regular inspection of lifting equipment used to build surrounding fences
- MSZ 3256/3-1981 Viscosity detector. Independent viscosity detector
- MSZ 8888/21-1980 environmental test. Hydroxide detection
- MSZ 3295/5.lap-1968 Aluminum Oxide Chemical Detection Silica Content Detection
- MSZ 18222/3-1979 Audiometry instrument testing methods
- MSZ 8880/2.lap-1963 Electrical product testing tools and testing methods. Use instruments
- MSZ 3295/7-1971 Bauxite chemical testing for titanium. The oxide content detection
- MSZ 3295/6-1971 Bauxite Chemical Testing Iron Content Testing
- MI 8887/21-1985 Environmental testing plan. Sulfur dioxide detection
International Organization for Standardization (ISO)
- ISO 9918:1993 Capnometers for use with humans; requirements
- ISO 21195:2020 Ships and marine technology — Systems for the detection of persons while going overboard from ships (man overboard detection)
Society of Automotive Engineers (SAE)
- SAE AS412A-1991 CARBON MONOXIDE DETECTOR INSTRUMENTS
- SAE AS412B-2008 Carbon Monoxide Detector Instruments
- SAE AS412B-2001 Carbon Monoxide Detector Instruments
SAE - SAE International
- SAE AS412A-1956 Carbon Monoxide Detector Instruments
European Committee for Standardization (CEN)
- EN 15918:2011 Cycles - Cycle trailers - Safety requirements and test methods (Incorporates Amendment A1: 2013)
- EN 15888:2014 Transportable gas cylinders - Cylinder bundles - Periodic inspection and testing
- prEN 50104-1992 Electrical apparatus for the detection and measurement of oxygen; performance requirements and test methods
- EN 15918:2011+A1:2013 Cycles - Cycle trailers - Safety requirements and test methods
- EN 15918:2011+A2:2017 Cycles - Cycle trailers - Safety requirements and test methods
- EN 14876:2007 Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums
- EN ISO 11623:2002 Transportable Gas Cylinders - Periodic Inspection and Testing of Composite Gas Cylinders ISO 11623: 2002
- EN 1802:2002 Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders
AT-ON
- ONORM E 1372-1955 Detector. Ball pressure detector, heating mandrel detector
- ONORM E 1360-1960 Detector. Ball pressure detector, heating mandrel detector
- ONORM E 1355-1959 Detector. Anti-splash detector
- ONORM E 1356-1968 Detector. Check the mandrel and stylus
- ONORM E 1352-1955 Test Equipment. Detector Staubschuβ
GSO
- GSO ISO 12133:2015 Small craft -- Carbon monoxide (CO) detection systems
- OS GSO ISO 12133:2015 Small craft -- Carbon monoxide (CO) detection systems
- BH GSO ISO 12133:2017 Small craft -- Carbon monoxide (CO) detection systems
- GSO IEC 60605-2:2014 Equipment reliability testing - Part 2: Design of test cycles
- OS GSO IEC 60605-2:2014 Equipment reliability testing - Part 2: Design of test cycles
- BH GSO IEC 60605-2:2016 Equipment reliability testing - Part 2: Design of test cycles
SE-SIS
- SIS SS IEC 671:1983 Nuclear instrumentation - Protection system of nuclear reactors - Period/c tests and monitoring
- SIS SS-IEC 1005:1991 Nuclear instrumentation — Portable neutron ambient dose equivalent ratemeters for use in radiation protection
- SIS SS IEC 692:1984 Nuclear instrumentation — Density meters utilizing ionizing radiation — Definitions and test methods
- SIS SS IEC 476:1989 Nudear instrumentation — Electrical measuring instruments utilizing radioactive sources
- SIS SS IEC 759:1986 Nuclear instrumentation —Test procedures for semiconductor X-ray energy spectrometers
International Telecommunication Union (ITU)
- ITU-T N.4 FRENCH-1988 DEFINITION AND DURATION OF THE LINE - UP PERIOD AND THE PREPARATORY PERIOD
- ITU-T N.4 SPANISH-1988 DEFINITION AND DURATION OF THE LINE - UP PERIOD AND THE PREPARATORY PERIOD
- ITU-T M.610-1988 PERIODICITY OF MAINTENANCE MEASUREMENTS ON CIRCUITS
- ITU-T M.610 FRENCH-1988 PERIODICITY OF MAINTENANCE MEASUREMENTS ON CIRCUITS
- ITU-T M.610 SPANISH-1988 PERIODICITY OF MAINTENANCE MEASUREMENTS ON CIRCUITS
- ITU-T N.54 FRENCH-1988 Definition and Duration of the Line-up Period and the Preparatory Period
- ITU-T N.54 SPANISH-1988 Definition and Duration of the Line-up Period and the Preparatory Period
KR-KS
- KS C 6594-2007(2023) Performance requirements for instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
- KS C 6595-2007(2023) Installation, operation and maintenance of instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
- KS C IEC 61779-4-2003(2023) Electrical devices for detecting and measuring combustible gases - Part 4 Performance requirements for Group II devices for detecting lower explosion limit volume fraction
- KS C 6597-2007(2023) Installation, operation and maintenance of carbon monoxide detection instruments
ISA - International Society of Automation
- ISA 92.04.01 PART I-1996 Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres
SCC
- AS 2275.2:1979 Combustible gas detection instruments for use in explosive atmospheres - Performance requirements
- UL 920401-2017 Standard for Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres
- AS 2275.1:1979 Combustible gas detection instruments for use in explosive atmospheres - General requirements for explosion protection of electrical apparatus and systems
- AWWA WQTC65943 Measuring the Life Cycle Cost of Chloramines
- AWWA JAW11018 Journal AWWA — Lower Detection Limits Found for Chlorine Dioxide Contaminants
- NS-EN 1518:1998 Non-destructive testing — Leak testing — Characterization of mass spectrometer leak detectors
- 09/30196927 DC BS ISO 12133. Small craft. Carbon monoxide (CO) detection systems
- AENOR UNE 53989-2 EX:1994 Plastics. Determination of circumferential rigidity in plastic tubes. Part 2: short-term circumferential stiffness. Determination by the relaxation method.
- CEI 56-18:2000 Equipment reliability testing - Part 2: Design of test cycles
- DANSK DS/EN 13631-16:2004 Explosives for civil uses - High explosives - Part 16: Detection and measurement of toxic gases
- NS-EN 13631-16:2004 Explosives for civil uses — High explosives — Part 16: Detection and measurement of toxic gases
- DANSK DS/ISO 26142:2012 Hydrogen detection apparatus - Stationary applications
- DANSK DS/ISO 12133:2021 Small craft – Carbon monoxide (CO) detection systems and alarms
US-CFR-file
- CFR 46-61.40-2014 Shipping. Part61:Periodic tests and inspections. Subpart61.40:Design verification and periodic testing of vital system automation. Section61.40-10:Test procedure details.
IETF - Internet Engineering Task Force
- RFC 3432-2002 Network performance measurement with periodic streams
Canadian Standards Association (CSA)
- CSA 6.19-M93-CAN/CGA-1993 Residential Carbon Monoxide Detector.Modification No 1: Septembre 1999
British Standards Institution (BSI)
- BS EN ISO 11623:2002 Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders
- BS ISO 12133:2021 Small craft. Carbon monoxide (CO) detection systems and alarms
- BS EN 12863:2002 Transportable gas cylinders - Periodic inspection and maintenance of dissolved acetylene cylinders
- BS EN 12863:2002(2006) Transportable gas cylinders - Periodic inspection and maintenance of dissolved acetylene cylinders
- BS EN 1968:2002 Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders
- BS EN ISO 17405:2014 Non-destructive testing. Ultrasonic testing. Technique of testing claddings produced by welding, rolling and explosion
- BS EN 1802:2002 Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders
- BS EN 1803:2002 Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders
German Institute for Standardization
- DIN EN 14876:2007 Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums; English version of DIN EN 14876:2007-04
- DIN 25456-1:1999 Neutron fluence measurement - Part 1: Fast-neutron fluence determination with activation and fission detectors
- DIN 7839:1994-07 Rim circumference gauges; ball gauges and disk gauges
- DIN EN 50270:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen; German version EN 50270:2006
IET - Institution of Engineering and Technology
- TARG DETEC MARI RDR-2004 Target Detection by Marine Radar
Underwriters Laboratories (UL)
- UL 920401 BULLETIN-2017 UL Standard for Safety Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres (COMMENTS DUE: OCTOBER 9@ 2017)
- UL 920401-2022 UL Standard for Safety Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres
Association Francaise de Normalisation
- NF EN 13631-16:2005 Explosifs à usage civil - Explosifs - Partie 16 : détection et mesurage des gaz toxiques
- NF E29-785*NF EN 1968:2002 Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders.
- NF E29-784*NF EN 14876:2007 Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums
- NF E29-785/A1*NF EN 1968/A1:2006 Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders
- NF C23-570:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.
- NF C23-570*NF EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
- NF X20-352:1976 Dioxide sulphur determination by mass spectrometry.
- NF A09-327*NF EN ISO 17405:2014 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion
Indonesia Standards
- SNI 19-1498-1989 Continuous NO and NO2 test apparatus in exhaust-gases
- SNI ISO 9918:2008 Safety requirement of capnometers use for human
CZ-CSN
- CSN 50 0344-1988 Board testing. ursting strength (Schopper-Dalen appa- atus)
- CSN ISO 2759:1993 Board. Determination of bursting strength
International Electrotechnical Commission (IEC)
- IEC 60910:1988 Containment monitoring instrumentation for early detection of developing deviations from normal operation in light water reactors.
American National Standards Institute (ANSI)
- ANSI N42.33-2003 Radiation Detection Instrumentation for Homeland Security
Japanese Industrial Standards Committee (JISC)
- JIS B 7184:1972 Measuring projectors
CN-KA
- KA/T 16-2023 Explosion-proof low-energy γ-γ combined logging tool for coal mines
NZ-SNZ
- AS/NZS 60079.29.2:2008 Explosive atmospheres Part 29.2: Gas detectors-Selection, installation, use and maintenance of detectors for flammable gases and oxygen
IEC - International Electrotechnical Commission
- IEC 60295:1969 D.C. Periodmeters: Characteristics and Test Methods (Edition 1.0)
American Society for Testing and Materials (ASTM)
- ASTM E236-66(2006) Standard Specification for Apparatus For Microdetermination Of Alkoxyl Groups
Defense Logistics Agency
- DLA A-A-59308 VALID NOTICE 2-2009 Clinometers, Ship, and Accessories
U.S. Air Force
- AIR FORCE A-A-59574-2004 FUEL OXIDATION TESTER, ASTM D3241
CN-STDBOOK
- 图书 A-4743 Detection technology and application of withstand voltage tester
CENELEC - European Committee for Electrotechnical Standardization
- EN 50073:1999 Guide for Selection@ Installation@ Use and Maintenance of Apparatus for the Detection and Measurement of Combustible Gases or Oxygen
BR-ABNT
- ABNT MB-114-1951 Single-phase electronic measuring instrument detection
Danish Standards Foundation
- DS/EN 50291-1:2021 Gas detectors – Electrical apparatus for the detection of carbon monoxide in domestic premises – Part 1: Test methods and performance requirements
ES-AENOR
- UNE 23-301-1988 Carbon monoxide concentration detection equipment in garages and parking lots