icpms installation requirements pe

icpms installation requirements pe, Total:226 items.

The international standard classification for "icpms installation requirements pe" includes: Shipbuilding and marine structures in general , Other cells and batteries , Accommodation spaces , Aircraft and space vehicles in general , Furniture , Other standards related to shipbuilding and marine structures , Road vehicles in general , General standards related to shipbuilding and marine structures , Conduits for electrical purposes , Sports equipment and facilities in general , Transport in general , Commercial vehicles in general .

The Chinese standard classification for "icpms installation requirements pe" includes: Deck machinery , Power generation, transformation and distribution equipment for vessel , Vessel technology , Accommodation outfit , Marking, packaging, transport and storage in general , Basic standards and general methods , Hygiene, safety and labor protection , Furniture products , Special devices for auxiliary vessel and survey vessel , Electrical equipment and tool in general , Sports goods , Hygiene, safety and labor protection , New energy vehicle and other automobiles , Rigging equipment outfit in general .

Military Standard of the People's Republic of China-General Armament Department

GJB 8592-2015 Wire thread insert installation requirements
GJB 513A-1997 Naval gun installation requirements
GJB 1705-1993 Missile antenna installation requirements
GJB 1705A-2021 Missile antenna installation requirements
GJB 3835-1999 General requirements for surface mount printed board assemblies
GJB 1303A-2021 Safety requirements for missile hoisting
GJB 5305-2004 Helicopter power plant installation design requirements

Professional Standard-Ships

CB 1282-1995 Installation Requirements for Anchor Equipment of Submarine
CB 1310-1996 Installation Requirements for Battery of Submarine
CB 1331-1998 Installation requirement of missile launcher for naval surface ships
CB/T 3606-1993 Mechanical and electrical equipment installation quality requirements
CB/Z 172-1997 Requirements of hull accessory installation for submarine
CB/T 3602-1993 Requirements for Installation Quality of Cabin Furniture
CB/Z 209-2011 Assemble technical demand for submarine shaft
CB/T 3652-2016 Drawing Requirements for Installation Drawings of Electrical Outfittings
CB/Z 209-1984 Technical requirements of submarine shaft system installation

Hunan Provincial Standard of the People's Republic of China

DB43/T 1168.3-2019 General Technical Requirements for Food Packaging Polyester (PET)/Polyethylene (PE) Composite Films and Bags

Professional Standard - Machinery

JB 7233-1994 Safety Requirements for Packing Machine

Professional Standard - Aviation

HB/Z 249-1993 Requirements for the manufacture and installation of aircraft assembly process equipment
HB 6203-1989 Steel wire turnbuckles - installation requirement
HB 7490-1997 Design and Installation Requirements for Aircraft Armor

Professional Standard - Aerospace

QJ 1247A-2006 Steel wire screw sleeve installation technical requirements
QJ 2574-1993 Satellite Assembly Safety Requirements
QJ 2574A-1998 Safety Requirements for Satellite General Installation

Professional Standard - Military and Civilian Products

WJ 2404-1997 Ammunition charge assembly production safety requirements

Hebei Provincial Standard of the People's Republic of China

DB13/T 2382-2016 General technical requirements for polyethylene (PE) water conveyor belts

Group Standards of the People's Republic of China

T/YH 1007-2020 Spacecraft Fastener Installation Requirements
T/YXJ 803-2023 Safety requirements for nailing and heeling machines
T/CANSI 36-2020 Requirements of e fficient d uct i nstallation for ship
T/CEA 9011-2021 Technical requirements for elevators installation & construction
T/CANSI 38-2020 Installation r equirements of marine GRP pipe
T/CNFA 025-2023 Furniture distribution unit installation requirements

Professional Standard - Traffic

JT/T 1216-2018 Requirements for installation of dredge pump
JT/T 58-1993 Technical requirements for assembly and installation of marine diesel engines

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 37459-2019 Jack-up jacking system installation requirement
GB/T 34288-2017 Techincal and installation requirements of boxing ring
GB 8877-1988 Safety requirements for the installation and operation and maintenance of household electrical appliances
GB/T 13381.1-1992 Specification for conduits for electrical installations - General reguirements
GB 19239-2013 Mounting requirements of special equipment for gas vehicle
GB/T 18026-2000 Safety requirements for paper products handling and storage

Professional Standard - Automobile

QC/T 984-2014 Automotive Glass Replacement Requirement
QC/T 814-2009 Mounting requirements of special equipments for dimethyl-ether vehicles

Professional Standard - Petroleum

SY/T 5957-1994 Requirements for Installation of Electrical Appliances at Wellsite

Professional Standard - Aquaculture

SC/T 8081-1994 Technical Requirements for Installation of Auxiliary Machine for Fishing Vessel
SC/T 8119-2001 Technical demand of install outfit for fiberglass reinforced plastics fishing vessel

Deutsche Vereinigung des Gas- und Wasserfachs

DVGW VP 302:2006-06 Natural gas sealing valve arm devices (PE 80 and PE 100) Requirements and tests
DVGW VP 647:2007-06 Polyethylene (PE 80 and PE 100) shut-off devices for drinking water distribution systems - Requirements and tests
DVGW W 364 P:2010-06 Stop Valves made of Polyethylene (PE 80 and PE 100) for Drinking Water Distribution Systems - Requirements and Tests

German Institute for Standardization

DIN 8075:2018-08 Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English
DIN 8075 E:2017-08 Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing
DIN 8075:1965 Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing
DIN 8075 E:2017 Draft Document - Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English
DIN 8075 E:2010-06 Draft Document - Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing
DIN EN ISO 15527:2022-05 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2022); German version EN ISO 15527:2022
DIN 16833 E:2008-07 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, testing
DIN 16833:2022-03 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, testing; Text in German and English / Note: Date of issue 2022-02-04*Intended as replacement for DIN 16833 (2009-09).
DIN 16833:2022 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, testing; Text in German and English
DIN 8075:2011 Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English
DIN 16833:2023 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, testing; Text in German and English
DIN 16833:2009-09 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, testing / Note: To be replaced by DIN 16833 (2022-03).
DIN 8075:2018 Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English
DIN 8075:2011-12 Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English
DIN 16833:2024 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, testing; Text in German and English
DIN 16833:2009 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, testing
DIN 8075:1999 Polyethylene (PE) pipes - PE 63, PE 80, PE 100, PE-HD - General quality requirements, testing
DIN EN 12929-1 A-1 E:2020-11 Safety requirements Cable car installation design Basic requirements for transporting people Part 1: Requirements for all devices
DIN EN 1398:1997 Dock levellers - Safety requirements
DIN EN 1398:2009-07 Dock levellers - Safety requirements; German version EN 1398:2009 / Note: DIN EN 1398 (1997-11) remains valid alongside this standard until 2009-12-28.
DIN EN ISO 15527:2019 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2018)
DIN EN ISO 15527:2021 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO/DIS 15527:2021); German and English version prEN ISO 15527:2021
DIN EN ISO 15527:2019-03 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2018)
DIN EN ISO 15527:2022 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2022)
DIN 16925:1971 Requirements and test methods for PE (polyethylene) sheets
DIN 16842:2022 Polyethylene (PE) pipes - PE-HD for pressureless applications - General quality requirements, dimensions and testing; Text in German and English
DIN 16842:2022-03 Polyethylene (PE) pipes - PE-HD for pressureless applications - General quality requirements, dimensions and testing; Text in German and English / Note: Date of issue 2022-02-04*Intended as replacement for DIN 16842 (2013-05).
DIN 16842:2023 Polyethylene (PE) pipes - PE-HD for pressureless applications - General quality requirements, dimensions and testing; Text in German and English
DIN 16842:2013-05 Polyethylene (PE) pipes - PE-HD for pressureless applications - General quality requirements, dimensions and testing; Text in German and English / Note: To be replaced by DIN 16842 (2022-03).
DIN EN 12929-1:2005 Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations; German version EN 12929-1:2004
DIN 8975-5:1979 Safety technical requirements for refrigeration equipment
DIN 8975-4:1978 Safety technical requirements for refrigeration equipment
DIN 16833:2023-10 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, testing; Text in German and English
DIN 16833:2024-02 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, testing; Text in German and English
DIN 3640 E:2024-08 Draft Document - Polyethylene shut-off valves (PE 80 and PE 100) for drinking water distribution systems - Requirements and tests
DIN EN 12929-1:2015-05 Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations; German version EN 12929-1:2015
DIN 16892:2000 Crosslinked polyethylene (PE-X) pipes - General requirements, testing
DIN EN ISO 15527:2021-04 Draft Document - Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO/DIS 15527:2021); German and English version prEN ISO 15527:2021

National Fire Protection Association (NFPA)

NFPA 70EH CH 4-2004 Installation Safety Requirements

American Water Works Association (AWWA)

AWWA M55-2020 PE Pipe — Design and Installation, Second Edition
AWWA M55 PE Pipe — Design and Installation, Second Edition

International Organization for Standardization (ISO)

ISO 15875-1:2025 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General
ISO 15527:2022 Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
ISO 15527:2018 Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
ISO 15527:2010 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods
ISO 15527:2007 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods
ISO 3459:1976 Polyethylene (PE) pressure pipes; Joints assembled with mechanical fittings; Internal under-pressure test method and requirement
ISO 3459:2015 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure

Netherlands Institute for Standardization

NEN 2673-1972 Code ofpractice for installation ofPE-waste pipes indoors
NEN 1092-1984 Safety requirements for polyethylene (PE) gas pipe lines operating at working pressures exceeding 1 bar
NEN 3380-1971 Safety requirements for refrigeration plants

American Society of Mechanical Engineers (ASME)

ASME B107.49M-1998 Nail Sets: Safety Requirements
ASME SEC IV PT HG A-7-2001 Article 7 Installation Requirements
ASME SEC IV PT HLW A-8-2001 Article 8 Installation Requirements
ASME B107.50M-1998 Brick Chisels And Brick Sets: Safety Requirements

GCC Standardization Organization

GSO ISO 15527:2016 Plastics -- Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) -- Requirements and test methods
GSO 2718:2023 Safety Requirement for Modified Vehicles

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 15527:2016 Plastics -- Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) -- Requirements and test methods
OS GSO 1617:2002 Safety requirements for the instaldation of air conditioning and ventilating systems - Part 3 Requirements of air distribution.
OS GSO 2117:2011 Safety Requirements for Cord Extension Sets

Spanish Association for Standardization (UNE)

UNE-EN ISO 15527:2022 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2022)
UNE-EN ISO 15527:2019 Plastic polyethylene compression molded sheets (PE-UHMW, PE-HD) Requirements and test methods
UNE-EN 1398:2010 Dock levellers - Safety requirements
AENOR UNE-EN ISO 15527:2014 Plastics - Compression-molded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2010)
UNE-EN ISO 15527:2014 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2010)
AENOR UNE-EN 1398:2010 Dock levelers - Safety requirements
UNE 56823:2008 Wood flooring for external uses. Installation. Requirements.

Association Francaise de Normalisation

NF T54-426*NF EN ISO 15527:2022 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods
NF T54-426:2013 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods
NF EN ISO 15527:2022 Plastics - Compression-molded polyethylene sheets (PE-UHMW, PE-HD) - Requirements and test methods
NF E52-614*NF EN 1398:2009 Dock levellers - Safety requirements
NF C17-200:1997 Public lighting installations - Requirements.
NF S61-932:1993 Fire safety systems (F.S.S.). Installation requirements.
NF P82-902-1:2004 Safety requirements for cableway installations designed to carry persons - General requirements - Part 1 : requirements for all installations.
NF P82-902-1*NF EN 12929-1:2015 Safety requirements for cableway installations designed to carry persons - General requirements - Part 1 : requirements for all installations
NF EN 931/IN2:2009 Shoe making machines - Shoe assembly machines - Safety regulations
NF C71-247-0:2008 Lamp controlgear - Part 1 : general and safety requirements.

Danish Standards Foundation

DS/EN ISO 15527:2013 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods
DANSK DS/ISO 15527:2022 Plastics – Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) – Requirements and test methods
DANSK DS/EN 1398:2009 Dock levellers - Safety requirements
DANSK DS/EN ISO 15527:2018 Plastics – Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) – Requirements and test methods (ISO 15527:2018)
DS/EN 1398:2009 Dock levellers - Safety requirements
DS/EN 12929-1:2004 Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations
DS/EN ISO 14632:1999 Extruded sheets of polyethylen (PE-HD) - Requirements and test methods.

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 15527:2017 Plastics -- Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) -- Requirements and test methods
BH GSO 2718:2023 Safety Requirement for Modified Vehicles
BH GSO 2117:2011 Safety Requirements for Cord Extension Sets

Finnish Standards Institute

SFS 2335-1980 plastic pipe. PE-pressure pipe. Quality requirements
SFS 3534-1976 Flexible plug-in switch. Installation requirements

Ente Nazionale Italiano di Unificazione

UNI EN ISO 15527:2019 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods
UNI 9036:2015 Gas meters - Installation requirements
UNI EN ISO 15527:2022 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods
UNI EN 1263-2:2000 Safety nets - Safety requirements for the erection of safety nets
UNI EN 1398:2009 Dock levellers - Safety requirements
UNI EN 1953:2025 Application equipment for coating materials - Safety requirements
UNI 11673-4:2021 Installation of doors and windows - Part 4: Requirements and verification criteria of installation
EC 1-2021 UNI 11673-4:2021 Installation of doors and windows - Part 4: Requirements and verification criteria of installation
UNI 11673-4-2021 Installation of doors and windows - Part 4: Requirements and verification criteria of installation
EC 1-2021 UNI 11673-4-2021 Installation of doors and windows - Part 4: Requirements and verification criteria of installation
UNI EN 931:2006 Footwear manufacturing machines - Lasting machines - Safety requirements
UNI 11467:2012 Heat pump geothermal systems - Installation requirements
UNI 11691:2017 Tyre demounting and mounting machines for vehicles - Safety requirements

British Standards Institution (BSI)

BS EN ISO 15527:2018 Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
BS EN ISO 15527:2022 Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
BS ISO 15527:2007 Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
BS ISO 15527:2010 Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
BS EN 12929-1:2015 Safety requirements for cableway installations designed to carry persons. General requirements. Requirements for all installations
BS EN 12929-1:2015+A1:2022 Safety requirements for cableway installations designed to carry persons. General requirements. Requirements for all installations
BS EN 1398:2009 Dock levellers - Safety requirements
BS EN 12929-1:2004 Safety requirements for cableways installation designed to carry persons - General requirements - Requirements for all installations
21/30429475 DC BS EN ISO 15527. Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
BS 60519-1:1993 Safety in Electroheat Installations - General Requirements
25/30511993 DC Draft BS EN 12929-1 Safety requirements for cableway installations designed to carry persons. General requirements. - Part 1: Requirements for all installations
BS EN 60519-1:1993 Safety in electroheat installations-General requirements
20/30424933 DC BS EN 12929-1 AMD1. Safety requirements for cableway installations designed to carry persons. General requirements - Part 1. Requirements for all installations

International Association of Plumbing and Mechanical Officials

IAPMO IS 29-2010 PE-RT hot and cold water pipe distribution system installation standard
IAPMO IS 12-2006 Installing Standard Polyethylene (PE) for Gas Yard Piping

Magyar Szabványügyi Testület

MSZ 151/1-1982 High power installation requirements

Der Energieeffizienzverband für Wärme, Kälte und KWK e. V.(AGFW)

AGFW FW 502 A:1998-12 Requirements and Installation Guide

American National Standards Institute （ANSI)

ANSI A10.13-2001 Safety Requirements for Steel Erection
ANSI/ASSP A10.23-2019 Safety Requirements for the Installation of Drilled Shafts
ANSI/ASSE A10.23-2014 Safety Requirements for the Installation of Drilled Shafts
ANSI/ASSE A10.19-2008 Safety Requirements for Pile Installation and Extraction Operations

American Society of Safety Professionals (ASSP)

ASSP A10.13-2001 Safety Requirements for Steel Erection
ASSP A10.23-2019 Safety Requirements for the Installation of Drilled Shafts
ASSP A10.30-2020 Safety Requirements for the Installation of Ground Anchors and Micropiles
ASSP A10.23-2014 Safety Requirements for the Installation of Drilled Shafts (Formerly ASSE A10.23-2014)
ASSP A10.13-2011(R2017) Safety Requirements for Steel Erection (Formerly ASSE A10.13-2011 (R2017))

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0126-42 E*DIN IEC 62548:2010-07 IEC 62548: Photovoltaic (PV) generator installation and safety requirements
VDE 0712-30-2001*DIN EN 61347-1:2001 Lighting devices Part 1: General requirements and safety requirements

Swedish Institute for Standards

SS-EN 12930:2015 Safety requirements for cableway installations designed to carry persons - Calculations
SS-EN 1908:2015 Safety requirements of cableway installations designed to carry persons - Tensioning devices
SS-EN ISO 15875-1:2004 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003)
SS-EN 13355:2005 Coating plants - Combined booths - Safety requirements
SS-EN ISO 15527:2022 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2022)
SS-EN 1907:2005 Safety requirements for cableway installations designed to carry persons - Terminology

Korean Agency for Technology and Standards (KATS)

KS T 2048-2014(2024) Requirements for apparatus mounting coil
KS T 2048-2019 Requirements for apparatus mounting coil
KS T 2048-2024 Requirements for apparatus mounting coil

Underwriters Laboratories (UL)

UL 96A-2023 Installation Requirements for Lightning Protection Systems
UL 96A-2018 UL Standard for Safety Installation Requirements for Lightning Protection Systems
UL 96A BULLETIN-2009 UL Standard for Safety Installation Requirements for Lightning Protection Systems

Canadian Standards Association (CSA)

CAN/CSA-M682-2004(C2019) Agricultural Front Loading Devices: Safety Requirements
CSA E61347-1-2024 Lamp controlgear — Part 1: General and safety requirements Appareillages de lampes — Partie 1 : Exigences générales et exigences de sécurité
CSA M682-2004(R2014) Safety requirements for agricultural front loaders
CSA B138.1-17/B138.2-2017 Portable oil-burning equipment — Packaged equipment requirements/Installation requirements
CAN/CSA B138.1-17/B138.2-2017(R2022) Portable oil-burning equipment - Packaged equipment requirements / Installation requirements

European Committee for Standardization (CEN)

prEN ISO 15875-1 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO/DIS 15875-1:2024)
FprEN ISO 15875-1 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO/FDIS 15875-1:2025)
FprEN ISO 15527:2021 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO/FDIS 15527:2021)
EN 12929-1:2015 Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations
EN 12929-1:2004 Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations

Standards Norway

NS-EN ISO 15527:2018 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2018)
NS-EN ISO 15527:2013 Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods (ISO 15527:2010)

Lithuanian Standards Office

LST EN 1398-2009 Dock levellers - Safety requirements
LST EN 12929-1-2004 Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations

Standard Association of Australia （SAA）

AS CA S009:2013 Installation requirements for customer cabling (Wiring Rules)
HB 295.3.4-2008 Product Safety Framework - Requirements for decoration
AS 2661:1983 Vapour degreasing plant - Design, installation and operation - Safety requirements
HB 295.3.4-2007 Product Safety Framework - Requirements for decoration
AS 3773:1990/Amdt 1:1992 Safety requirements for bulk solid containers

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 5019-1989 Acetylene installations.Safety requirements

Bureau of Indian Standards

IS 15796-2008 Automotive vehicles - Horn installation requirements
IS 17239-2019 Safety Requirements for Drives Used for Ropeway Installation for Passenger Transportation
IS 9080-1-1979 Safety requirements in electro-heat installations: Part 1 General requirements
IS 9080-4-1981 Safety requirements in electro-heat installations: Part 4 Particular requirements for arc furnace installations

Thai Industrial Standards Institute (TISI)

TIS 2213-2009 Lamp controlgear: general and safety requirments

Austrian Standards

OENORM EN ISO 15527:2021 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO/DIS 15527:2021)

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 61535.1:2003 Installation couplers - General requirements
AS/NZS 5033:2014 Installation and safety requirements for photovoltaic (PV) arrays
AS/NZS 5033:2021 Installation and safety requirements for photovoltaic (PV) arrays
AS/NZS 5033:2012 Installation and safety requirements for photovoltaic (PV) arrays