The markers and samples run at different speeds

The markers and samples run at different speeds, Total:82 items.

The international standard classification for "The markers and samples run at different speeds" includes: .

The Chinese standard classification for "The markers and samples run at different speeds" includes: .

Professional Standard - Tobacco

YC/Z 385-2011 Tobacco and tobacco products-Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 4753-2005 Thermal Sensation of Local Airflows with Different Temperatures and Velocities: Comparison between Summer and Winter

IT-UNI

UNI 7319-1974 Elastomers: tests of vulcanized rubbers. Determination of international rubber hardness on test pieces of nonstandard thickness and on finished articles.
UNI EN 43-1976 Door test methods. The status of door leaves in different humidity under the same climate conditions

German Institute for Standardization

DIN EN 15604:2009 Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen; English version of DIN EN 15604:2009-06
DIN CEN/TS 15604:2008 Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen; German version CEN/TS 15604:2007
DIN SPEC 91127:2011 Recommendation for Temperature Calibration of Fast Scanning Calorimeters (FSCs) for Sample Mass and Scan Rate; Text in English
DIN EN 15604:2009-06 Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen; German version EN 15604:2009 / Note: To be replaced by DIN EN ISO 15604 (2019-06).
DIN EN ISO 1600:2000-05 Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990); German version EN ISO 1600:1999
DIN 19051-4 Bb.1:2013 Test charts for micrography - Part 4: Test chart B for optical density and for determination of scale of reproduction; Supplement 1: Test card with different grey values for practical use
DIN EN ISO 1600:2000 Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990); German version EN ISO 1600:1999

International Organization for Standardization (ISO)

ISO 15604:2016 Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
ISO 1600:1990 Plastics; cellulose acetate; determination of light absorption on moulded specimens produced using different periods of heating
ISO/TS 7821:2005 Tobacco and tobacco products - Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods

National Aeronautics and Space Administration (NASA)

NASA NACA-TN-3501-1955 The transonic characteristics of 22 rectangular, symmetrical wing models of varying aspect ratio and thickness
NASA NACA-RM-L50E26-1950 Damping in roll of rectangular wings of several aspect ratios and NACA 65A-series airfoil sections of several thickness ratios at transonic and supersonic speeds as determined with rocket-powered models

CEN - European Committee for Standardization

PD CEN/TS 15604:2007 Fertilizers - Determination of different forms of nitrogen in the same sample@ containing nitrogen as nitric@ ammoniacal@ urea and cyanamide nitrogen

SCC

AWWA WQTC56993 Survival Differences of Male-Specific Coliphages in Different Groundwater Samples
SN-CEN/TS 15604:2007 Fertilizers — Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
UNE-CEN/TS 15604:2008 EX Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
DANSK DS/ISO 15604:2020 Fertilizers – Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
DANSK DS/EN 15604:2009 Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
NS-EN 15604:2009 Fertilizers — Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
08/30179332 DC BS EN 15604. Fertilizers. Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
DIN ISO 3951:1992 Sampling procedures and charts for inspection by variables for percent nonconforming; identical with ISO 3951:1989
DIN EN ISO 15604 E:2019 Draft Document - Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen (ISO 15604:2016); German and English version prEN ISO 15604:2019
DANSK DS/EN ISO 1600:1999 Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating
BS 6379-2:1984 Sampling of coffee and coffee products-Methods of sampling instant coffee in cases with liners
AENOR UNE-EN ISO 13565-2:1998 Geometric Product Specification (GPS). Surface quality: Profile method; surfaces with different functional properties, depending on the level of depth. Part 2: Characterization of heights using the material percentage curve (Cur...

RU-GOST R

GOST EN 15604-2013 Fertilizers. Determination of different forms of nitrogen in the same sample: nitric, ammoniacal, cyanamide and urea nitrogen

RO-ASRO

STAS 128/2-1981 Refractory products DIFFERFNTIAL DETFRMINATION OF COMPRESSION DEFORMATION TEMPERATFRE

American Society for Testing and Materials (ASTM)

ASTM B762-90(2005) Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
ASTM D7012-23 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
ASTM D7012-10 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
ASTM D7012-14 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
ASTM B762-90(1999) Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
ASTM R0027 Standards Related to Nondestructive Testing Developed by ASTM Committees Other Than Committee E-7 (This is not an ASTM standard; available as PDF, only)
ASTM B762-90(2010) Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
ASTM F1849-23 Standard Specification for Helmets Used in Ice Speed Skating (Long Track) and Short Track Speed Ice Skating (Not to Include Hockey)

GOSTR

GOST R ISO 15604-2019 Fertilizers. Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
GOST R 58588-2019 Sampling and preparation of plant samples for isotopic analysis
GOST R 58586-2019 Sampling and preparation of soil samples for isotopic analysis

Association Francaise de Normalisation

NF EN 15604:2009 Engrais - Détermination des différentes formes d'azote dans un même échantillon contenant l'azote sous forme nitrique, ammoniacale, uréique et cyanamidique
NF U42-149*NF EN 15604:2009 Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
NF ISO 8460:1987 Soluble coffee - Determination of density without packing and after packing
NF EN ISO 1600:1999 Plastics - Cellulose acetate - Determination of light absorption on molded specimens produced using different heating periods
NF T51-358*NF EN ISO 1600:1999 Plastics. Cellulose acetate. Determination of light absorption on moulded specimens produced using different periods of heating.
NF G07-182:1985 Textiles - Behavior in fire - Determination of flame propagation properties on test pieces oriented at 45 degrees - Measurement of flame propagation speed

British Standards Institution (BSI)

BS EN 15604:2009 Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
DD CEN/TS 15604:2007 Fertilizers — Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
BS DD CEN/TS 15604:2007 Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
14/30313910 DC BS ISO 15604. Fertilizers. Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
BS EN ISO 1600:1991 Plastics. Cellulose acetate. Determination of light absorption of moulded specimens produced using different periods of heating
BS EN ISO 1600:1999 Plastics - Cellulose acetate - Determination of light absorption of moulded specimens produced using different periods of heating
BS EN 1402-5:2003 Unshaped refractory products — Part 5: Preparation and treatment of test pieces
BS DD ISO/TS 7821:2005 Tobacco and tobacco products - Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods

AENOR

UNE-EN 15604:2009 Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE MN-00-4-5-2000 Discomfort Due to Skin Humidity with Different Fabric Textures and Materials
ASHRAE 4034-1997 Efficiency and Separation of Losses of an Induction Motor and Its Adjustable-Speed Drive at Different Loading/Speed Combinations (RP-770)

Lithuanian Standards Office

LST EN 15604-2009 Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen

European Committee for Standardization (CEN)

EN 15604:2009 Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
EN ISO 1600:1999 Plastics - Cellulose Acetate - Determination of Light Absorption on Moulded Specimens Produced Using Different Periods of Heating

Danish Standards Foundation

DS/EN 15604:2009 Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
DS/EN ISO 1600:1999 Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating

International Telecommunication Union (ITU)

ITU-T U.102 SPANISH-1996 Intex and similar services - Network requirements to effect interworking between terminals operating at different speeds
ITU-T S.36-1996 INTEX and Similar Services - Terminal Requirements to Effect Interworking between Terminals Operating at Different Speeds - Series S: Telegraph Services Terminal Equipment; Start-Stop Terminals Study Group 1; 7 pp

ESDU - Engineering Sciences Data Unit

TM 101-2011 Derivation of lubricant entrainment velocity for disc cams with six different types of follower

BE-NBN

NBN T 02-003-1988 Chemical products for industrial use - Sampling techniques - Solid chemical products in the form of particles varying from powders to coarse lumps

GB-REG

REG NACA-RM-L8H20-1948 An investigation at low speed of a 51.3 degree sweptback semispan wing equipped with 16.7-percent-chord plain flaps and ailerons having various spans and three trailing-edge angles

API - American Petroleum Institute

API PUBL 26-60043- THE EFFECT OF A RAPID 4% CARBOXYHEMOGLOBIN SATURATION INCREASE ON MAXIMAL TREADMILL EXERCISE

GSO

OS GSO ISO 1600:2015 Plastics -- Cellulose acetate -- Determination of light absorption on moulded specimens produced using different periods of heating
GSO IEC/TS 60034-31:2013 Rotating electrical machine -Part 31: Selection of energy efficient motors including variable speed applications - Application guide
OS GSO ISO 8656-1:2015 Refractory products -- Sampling of raw materials and unshaped products -- Part 1: Sampling scheme
BH GSO ISO 8656-1:2016 Refractory products -- Sampling of raw materials and unshaped products -- Part 1: Sampling scheme
GSO ISO 1600:2015 Plastics -- Cellulose acetate -- Determination of light absorption on moulded specimens produced using different periods of heating

HU-MSZT

MSZ KGST 2231-1980 Sample taking and sample preparation of alumina for mixture and moisture determination

ET-QSAE

ES B.K8.002-1973 Preparation of contract samples for analysis of edible oils and fats

Korean Agency for Technology and Standards (KATS)

KS H ISO TS 7821:2017 Tobacco and tobacco products－Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
KS H ISO TS 7821:2007 Tobacco and tobacco products－Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
KS H ISO TS 7821-2017(2022) Tobacco and tobacco products－Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
KS A ISO 11929-4-2002(2012) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 4：Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without

KR-KS

KS H ISO TS 7821-2017 Tobacco and tobacco products－Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods

Others: