Can an Ubbelohde viscometer be used to measure the viscosity of a solution with a high viscosity?
Can an Ubbelohde viscometer be used to measure the viscosity of a solution with a high viscosity?, Total:447 items.
The international standard classification for "Can an Ubbelohde viscometer be used to measure the viscosity of a solution with a high viscosity?" includes: Adhesives , Surface active agents , Chemical analysis , Rubber , Crude petroleum .
The Chinese standard classification for "Can an Ubbelohde viscometer be used to measure the viscosity of a solution with a high viscosity?" includes: Rubber products in general , Basic standards and general methods for adhesives , Basic standards and general methods for surface active agent , Basic standards and general methods for synthetic resin and plastic , Crude petroleum , Technical Management .
未注明发布机构
- FORD FLTM BJ 003-2-2001 DETERMINATION OF LOW TEMPERATURE VISCOSITY - BROOKFIELD VISCOSIMETER
- FORD FLTM EU-BJ 003-2-2001 DETERMINATION OF LOW TEMPERATURE VISCOSITY BROOKFIELD VISCOSIMETER
- FORD FLTM EU-BJ 003-02-2001 DETERMINATION OF LOW TEMPERATURE VISCOSITY BROOKFIELD VISCOSIMETER
- FORD FLTM BJ 003-02-2001 DETERMINATION OF LOW TEMPERATURE VISCOSITY - BROOKFIELD VISCOSIMETER
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 2794-2013 Determination for viscosity of adhesives—Single cylinder rotational viscometer method
- GB/T 5561-1994 Surface active agents-Determination of viscosity and flow properties using a rotational viscometer
- GB/T 1232-1992 Rubber unvulcanized -Determination of mooney viscosity
- GB/T 5561-2012 Surface active agents - Determination of viscosity and flow properties using a rotational viscometer
- GB/T 9269-1988 Determination of viscosity of architectural paints and coatings--Stormer viscosimeter method
- GB/T 15357-1994 Surface active agents and detergents-Determination of viscosity of liquid products using a rotational viscometer
- GB/T 2794-1995 Determination methods for viscosity of adhesives
Professional Standard - Civil Aviation
- MH/T 6062-2017 Viscosity test of thickened aircraft deicing/anti-icing fluids with the Brookfield LV viscometer
Professional Standard - Chemical Industry
- HG/T 2758-1996 Determination of Viscosity Number and Viscosity Ratio of Cellulose Acetate Dilute Solution
- HG/T 3323-1982 Method for Determination of Rubber Slurry Viscosity (Rotary Viscometer Method)
- HG/T 3323-2008 Rubber Latex Bord - Determination of viscosity(Rotating viscometer method)
- HG 4-1470-1982 Rubber latex - Determination of viscosity (Rotational viscometer method)
- HG/T 2712-1995 Determination of viscosity of liquid and solution phenolic resins
Professional Standard - Petroleum
- SY/T 0520-2008 Viscosity determination of crude petroleum—Equilibrium method by rotational viscomete
- SY 0520-2008 Crude oil viscosity determination rotational viscometer equilibrium method
- SY/T 0520-1993 Determination of Viscosity of Crude Oil by Rotational Viscometer Equilibrium Method
Professional Standard - Commodity Inspection
- SN/T 3369-2012 Determination of kinematic viscosity of transparent and opaque liquids - Automated viscometer
Taiwan Provincial Standard of the People's Republic of China
- CNS 6840-1980 Standard Liquid for Calibrating Viscometers
Professional Standard - Electron
- SJ/T 10227-1991 Methods of determination for viscosity of potassium silicate solution for use in electronic industry
German Institute for Standardization
- DIN 51562-2:1988-12 Viscometry; determination of kinematic viscosity using the Ubbelohde microviscometer
- DIN 51562-3:1985-05 Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times / Note: To be replaced by DIN 53000-4 (2019-04).
- DIN 53000-1:2023 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure
- DIN 53000-1:2023-07 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure
- DIN 51562-4:1999-01 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 4: Viscometer calibration and determination of the uncertainty of measurement
- DIN 53000-1 E:2019 Draft Document - Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure
- DIN 53000-3:2023 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 3: Calibration and determination of the uncertainty of measurement
- DIN 51562-1:1999-01 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure
- DIN 53000-3:2023-07 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 3: Calibration and determination of the uncertainty of measurement
- DIN 53000-4 E:2019-04 Draft Document - Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 4: Viscosity relative increment at short flow times
- DIN 53000-4 E:2019 Draft Document - Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 4: Viscosity relative increment at short flow times
- DIN 53000-2:2023 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 2: Sources of errors and corrections
- DIN 53000-2:2023-07 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 2: Sources of errors and corrections
- DIN 53015:2001 Viscometry - Measurement of viscosity by means of the rolling ball viscometer by Hoeppler
- DIN 53000-3 E:2019 Draft Document - Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 3: Calibration and determination of the uncertainty of measurement
- DIN 53000-1 E:2019-04 Draft Document - Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure
- DIN 53015 E:2018-07 Viscometry - Measurement of viscosity using the Hoeppler Falling-Ball Viscometer
- DIN 53015:2019-06 Viscometry - Measurement of viscosity using the Hoeppler Falling-Ball Viscometer
- DIN 53015:1978 Viscometry - Measurement of viscosity using the Hoeppler Falling-Ball Viscometer
- DIN 53222:1990-11 Determination of viscosity by falling-rod viscometer
- DIN 53000-2 E:2019 Draft Document - Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 2: Sources of errors and corrections
- DIN 53000-3 E:2019-04 Draft Document - Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 3: Calibration and determination of the uncertainty of measurement
- DIN 53015:2019 Viscometry - Measurement of viscosity using the Hoeppler Falling-Ball Viscometer
- DIN 53000-2 E:2019-04 Draft Document - Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 2: Sources of errors and corrections
- DIN 53017:1993 Viscometry; determination of the temperature coefficient of viscosity of liquids
- DIN 53222:1990 Determination of viscosity by falling-rod viscometer
- DIN 53015:2018-07 Draft Document - Viscometry - Measurement of viscosity using the Hoeppler Falling-Ball Viscometer
- DIN ISO 7884-2:1998 Glass - Viscosity and viscometric fixed points - Part 2: Determination of viscosity by rotation viscometers (ISO 7884-2:1987)
- DIN 53017:1993-11 Viscometry; determination of the temperature coefficient of viscosity of liquids
- DIN EN ISO 2884-2:2006-09 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003); German version EN ISO 2884-2:2006 / Note: To be replaced by DIN EN ISO 3219-2 (2020-02).
- DIN 53015:2001-02 Viscometry - Measurement of viscosity using the Höppler falling-ball viscometer
- DIN 53015 E:2018 Draft Document - Viscometry - Measurement of viscosity using the Hoeppler Falling-Ball Viscometer
- DIN ISO 7884-3:1998 Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer (ISO 7884-3:1987)
- DIN 52007-2:2006 Bitumen and bituminous binders - Determination of viscosity - Part 2: Measurement by drawn-sphere viscometer
- DIN ISO 7884-3:1998-02 Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer (ISO 7884-3:1987)
- DIN 53177:2002 Binders for paints and varnishes - Measurement of the dynamic viscosity of liquid resins; Resin solutions and oils by the capillary viscosimeter of isocelses type according to Ubbelohde
- DIN EN ISO 2884-2:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003); English version of DIN EN ISO 2884-2:2006-09
- DIN 51562-4:1999 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 4: Viscometer calibration and determination of the uncertainty of measurement
- DIN 53019-2:2001-02 Viscosimetry - Measurement of viscosities and flow curves by means of rotation viscosimeters - Part 2: Viscosimeter calibration and determination of the uncertainty of measurement
- DIN 53019-2:2001 Viscosimetry - Measurement of viscosities and flow curves by means of rotation viscosimeters - Part 2: Viscosimeter calibration and determination of the uncertainty of measurement
- DIN EN ISO 1628-1:1998 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - Part 1: General principles
- DIN ISO 7884-2:1998-02 Glass - Viscosity and viscometric fixed points - Part 2: Determination of viscosity by rotation viscometers (ISO 7884-2:1987)
- DIN EN ISO 2884-1:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999); English version of DIN EN ISO 2884-1:2006-09
- DIN EN ISO 1628-1:2021-06 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021); German version EN ISO 1628-1:2021
- DIN 51562-2:1988 Viscometry; determination of kinematic viscosity using the Ubbelohde microviscometer
- DIN 51562-3:1985 Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times
- DIN 51562-1:1999 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure
- DIN 51562-1:1978 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure
- DIN EN ISO 1628-1 E:2020-05 Determination of viscosity of polymers in dilute solutions with capillary viscometer for plastics Part 1: General principles (draft)
- DIN 51562-1 Berichtigung 1:2018 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure; Corrigendum 1
- DIN EN ISO 1628-2:1999 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscosimeters - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:1998); German version EN ISO 1628-2:1998
- DIN 51562-1:1999-рус Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure
- DIN 53018-1:1976 Viscometry; Measurement of the Dynamic Viscosity of Newtonian Fluids with Rotational Viscometers; Principles
- DIN 51398:1983 Testing of lubricants; procedure for measurement of low temperature apparent viscosity by means of the Brookfield viscometer (liquid bath method)
- DIN 53018-2:1976 Viscometry; Measurement of the Dynamic Viscosity of Newtonian Fluids with Rotational Viscometers; Sources of Errors and Corrections concerning Cylinder; Rotation Viscometers
- DIN 51366:1977-06 Testing of mineral oil hydrocarbons; measurement of kinematic viscosity by means of the Cannon-Fenske viscometer, for opaque liquids
- DIN ISO 7884-5:1998 Glass - Viscosity and viscometric fixed points - Part 5: Determination of working point by sinking bar viscometer (ISO 7884-5:1987)
- DIN EN ISO 1628-3:2003 Plastics – Determination of viscosity of polymers in dilute solution using capillary viscometers – Part 3: Polyethylene and polypropylene
- DIN EN ISO 1628-2:2020-12 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:2020); German version EN ISO 1628-2:2020
- DIN ISO 7884-1:1998 Glass - Viscosity and viscometric fixed points - Part 1: Principles for determining viscosity and viscometric fixed points (ISO 7884-1:1987)
- DIN EN ISO 1628-2 E:2020-04 Capillary Viscometer for Plastics Determination of Viscosity of Polymers in Dilute Solutions Part 2: Polyvinyl Chloride Resins (Draft)
- DIN EN ISO 1628-1:1998-10 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:1998)
- DIN EN 12092:2002-02 Adhesives - Determination of viscosity; German version EN 12092:2001
- DIN EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)
- DIN ISO 7884-5:1998-02 Glass - Viscosity and viscometric fixed points - Part 5: Determination of working point by sinking bar viscometer (ISO 7884-5:1987)
- DIN EN ISO 1628-1:2009-07 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2009)
- DIN EN ISO 1628-2:1999-11 Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:1998)
- DIN EN ISO 1628-1:2024 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO/DIS 1628-1:2024); German and English version prEN ISO 1628-1:2024
- DIN EN ISO 2884-2:2024 Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO 2884-2:2024)
Polski Komitet Normalizacyjny (PKN)
- PN C89291-20-1987 Poly(vinyl chloride) resins Determination of viscosity number in dilute solution by the Ubbelohde viscometer
- PN C89408-1986 Plastics -- Determination of viscosity by Hoppler's viscometer and Hoppler's rheoviscometer
- PN-EN ISO 1628-1-2021-08 E Plastics--Determination of the viscosity of polymers in dilute solution using capillary viscometers--Part 1: General principles (ISO 1628-1:2021)
- PN C04278-1971 Determination of viscosity of natural and synthetic rubbers by the shearing disk viscosimeter
- PN C81554-1986 Determination of the viscosity of paints, varnishes and printing inks bv use Rotothinner's viscometers
Swedish Institute for Standards
- SIS 02 35 13-1970 Determination of viscosity with H?ppler ball visc.ometer
- SIS 02 35 11-1968 Determination of viscosity for transparent liquids with Ubbelohde capillary viscometer
- SIS 02 35 12-1968 Determination of viscosity for opaque liquids with Cannon-Fenske capillary viscometer
- SS-EN ISO 1157:1999 Plastics - Cellulose acetate in dilute solution - Determination of viscosity number and viscosity ratio (ISO 1157:1990)
- SS-EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)
- SS-EN ISO 1628-3:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2010)
Czech Standards Institute (UNMZ)
- CSN 64 0347-1982 1 Vteitnnuitimi t>? viscosity \vi1k ro1
- CSN 25 8160-1966 Thermometers for determination of viscosity by means of Vogel-Ossag viscometer
- CSN 64 0348-1982 Plastice. Determination of viscosity b? eans of the Hoppler-Viscosimeter
- CSN ISO 7884-2:1994 Glass - Viscosity and viscometric fixed points - Part 2: Determination of viscosity by rotation viscometers
- CSN 65 7086-1983 Determination of viscosity in Hoppler konsistometer
- CSN ISO 7884-3:1994 Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer
- CSN 77 0843-1986 Packaging adhesive. Determination of viscosity with rotary viscosimeter
- CSN 64 0349-1982 Plastics. Determination of viscosity by means of the Hoppler reoviscosimeter
- CSN 64 0363-1982 Polyamides. Determination of the vis- osity number in dilute solution
- CSN 65 7087-1985 Determination of the viscosity of asphalts in Hoppler reoviscosimeter
- CSN ISO 7884-1:1992 Glass - Viscosity and viscometric fixed points - Part 1: Principles for determining viscosity and viscometric fixed points
- CSN 77 0842-1986 Packaging adhesives. Determination of viscosity by means of the Hóppler-Reo- viscosimeter
- CSN ISO 7884-5:1994 Glass - Viscosity and viscometric fixed points - Part 5: Determination of working point by sinking bar viscometr
- CSN 50 0210-1977 Determination of intrinsic viscosity in cupriethylenediamine solution (Cuene)
- CSN 65 6216-1981 Petroleum products. Determination of kinematic viscosity and calculation of dynamic viscosity
- CSN 72 1088-1983 Determination of suspension flow time by flow viscosimeter
American Society for Testing and Materials (ASTM)
- ASTM RR-D02-1750 2012 D7042-Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM RR-D02-1773 2014 D7042-Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM RR-D02-1742 2012 D7042-Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM RR-D02-1920 2019 D7042-Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM RR-D02-1741 2012 D7042-Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM RR-D02-1837 2016 D7042-Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM RR-D02-1555 2004 D7042-Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM D7483-20 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
- ASTM D7483-13a(2017) Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
- ASTM D7483-21 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
- ASTM D5225-09 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
- ASTM D7042-21a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM D7042-14 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer 40;and the Calculation of Kinematic Viscosity41;
- ASTM D5225-17 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
- ASTM D7042-12e1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM D7042-12a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM D5225-22 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
- ASTM D7042-16e2 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM D5225-98 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
- ASTM D7483-20a Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
- ASTM D7042-04 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM D5225-98(2003) Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
- ASTM D7945-20 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
- ASTM D7945-16 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
- ASTM D7945-21a Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
- ASTM RR-D02-1833 2016 D7945-Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
- ASTM D7945-20a Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
- ASTM D7945-21 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
- ASTM D7042-19e1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM D7042-25 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM RR-D02-1797 2014 D7945-Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
- ASTM D7042-16e3 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM RR-D02-1755 2013 D7483-Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
- ASTM RR-D02-1657 2008 D7483-Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
- ASTM D7042-21 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM D7945-14 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
- ASTM D7042-20 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM D7945-15 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
- ASTM D7483-08 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
- ASTM D7042-10 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM D7483-13 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
- ASTM F1080-93(2002) Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
- ASTM D7945-23 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
- ASTM D7042-16e1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM D7042-19 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM D7042-16 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM D7042-11a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM RR-D04-1038 2011 D7226-Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
- ASTM RR-D04-1037 2011 D7226-Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
- ASTM RR-D04-1031 2009 D7226-Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
- ASTM D7483-13a Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
- ASTM D7226-06 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
- ASTM D7226-11 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
- ASTM D7042-12 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM D7226-06e1 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
- ASTM D3205-86(1991) Standard Test Method for Viscosity of Asphalt with Cone and Plate Viscometer
- ASTM D7226-13 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
- ASTM D7226-10 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
- ASTM F1080-93(2008) Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
- ASTM D5225-14 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
- ASTM D4212-10 Standard Test Method for Viscosity by Dip-Type Viscosity Cups
- ASTM D7226-24 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
- ASTM D7226-13(2023) Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
- ASTM RR-D04-1024 2005 D7226-Standard Test Method for Determining the Viscosity ofEmulsified Asphalts Using a Rotational Paddle Viscometer
- ASTM D7226-13(2017) Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
- ASTM D7042-11 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM D4361-97(2002) Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter
- ASTM D4361-09 Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter
- ASTM RR-D02-1834 2016 D7279-Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
- ASTM RR-D02-1775 2013 D7279-Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
- ASTM D2983-04 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
- ASTM RR-D02-1604 2006 D7279-Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
- ASTM D5478-09 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
- ASTM D4361-97 Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter
- ASTM D5478-13(2022) Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
- ASTM D4361-10 Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter
- ASTM D2983-04a Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
- ASTM D5478-98(2003) Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
- ASTM D4287-00(2010) Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
- ASTM D4287-00 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
- ASTM D5478-98 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
- ASTM RR-D04-1035 2011 D7496-Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
- ASTM F1080-93(2013) Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
- ASTM D4287-94 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
European Committee for Standardization (CEN)
- EN 1628:2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading
- EN 1628:2021 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading
- EN ISO 2884-2:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
- EN ISO 1157:1999 Plastics - Cellulose Acetate in Dilute Solution - Determination of Viscosity Number and Viscosity Ratio ISO 1157: 1990
- EN ISO 2555:1999 Plastics - Resins in the Liquid State or as Emulsions or Dispersions - Determination of Apparent Viscosity by the Brookfield Test Method
- EN ISO 2555:2018 Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method
- EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)
- EN ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2009)
- EN ISO 12058-1:2002 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
- EN ISO 2884-1:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999)
- EN ISO 12058-1:2018 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
- EN ISO 1628-3:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2010)
- EN ISO 1628-2:2020 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:2020)
- EN ISO 1628-3:1999 Plastics - Determination of Viscosity Number and Limiting Number - Part 3: Polyethylenes and Polypropylenes ISO 1628-3:1991, Including Technical Corrigendum 1:1992
- prEN ISO 2884-2 rev Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
- EN ISO 1628-1:1998 Plastics - Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 1: General Principles ISO 1628-1:1998
- prEN 23219-1991 Plastics; polymers in the liquid, emulsified or dispersed state; determination of viscosity with a rotational viscosimeter working at defined shear rate (ISO 3219:1977)
GCC Standardization Organization
- GSO ASTM D7042:2023 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- GSO ISO 7884-2:2010 Glass -- Viscosity and viscometric fixed points -- Part 2: Determination of viscosity by rotation viscometers
- GSO ISO 7884-3:2010 Glass -- Viscosity and viscometric fixed points -- Part 3: Determination of viscosity by fibre elongation viscometer
- GSO ISO 25179:2013 Adhesives -Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives
- GSO ISO 12058-1:2015 Plastics -- Determination of viscosity using a falling-ball viscometer -- Part 1: Inclined-tube method
- GSO ISO 12634:2015 Graphic technology -- Determination of tack of paste inks and vehicles by a rotary tackmeter
Kingdom of Bahrain Testing and Metrology Directorate
- BH GSO ASTM D7042:2023 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- BH GSO ASTM D7483:2017 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
- BH GSO ISO 12058-1:2016 Plastics -- Determination of viscosity using a falling-ball viscometer -- Part 1: Inclined-tube method
Ente Nazionale Italiano di Unificazione
- UNI 9056:1987 Adhesives. Determination of viscosity by the rotary viscometer.
- UNI 8701-1:1986 Epoxide resins. Test methods. Determination of viscosity by means of holde-ubbelohde viscometer.
- UNI 9441:1989 Adhesives. Determination of viscosity of liquid adhesives with hoeppler viscometer.
- UNI EN ISO 1628-1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
- UNI EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
- UNI EN ISO 2555:2018 Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method
- UNI EN ISO 1628-3:2004 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Polyethylenes and polypropylenes
- UNI EN ISO 1628-2:2020 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins
- UNI EN ISO 1628-1:2025 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
- UNI EN ISO 1628-3:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes
- UNI 8701-3:1986 Epoxide resins. Test methods. Determination of viscosity by means of rotational viscometers.
- UNI EN 12092:2003 Adhesives - Determination of viscosity
- UNI 8701-2:1986 Epoxide resins. Test methods. Determination of viscosity by means of hoppler viscometer.
South African Bureau of Standard
- SANS 5153:2003 Paints and varnishes - Determination of viscosity by means of a Stormer viscometer
Korean Agency for Technology and Standards (KATS)
- KS L ISO 7884-2-2003(2018) Glass-Viscosity and viscometric fixed points-Part 2:Determination of viscosity by rotation viscometers
- KS L ISO 7884-2-2003(2023) Glass-Viscosity and viscometric fixed points-Part 2:Determination of viscosity by rotation viscometers
- KS L ISO 7884-2-2023 Glass - Viscosity and viscometric fixed points - Part 2: Determination of viscosity by rotation viscometers
- KS L ISO 7884-3-2003(2023) Glass-Viscosity and viscometric fixed points-Part 3:Determination of viscosity by fibre elongation viscometer
- KS L ISO 7884-1-2003(2018) Glass - Viscosity and viscometric fixed points - Part 1: Principles for determining viscosity and viscometric fixed points
- KS L ISO 7884-3-2003(2018) Glass-Viscosity and viscometric fixed points-Part 3:Determination of viscosity by fibre elongation viscometer
- KS L ISO 7884-3-2023 Glass-Viscosity and viscometric fixed points-Part 3:Determination of viscosity by fibre elongation viscometer
- KS L ISO 7884-5-2023 Glass - Viscosity and viscometric fixed points - Part 5: Determination of working point by sinking bar viscometer
- KS M ISO 2884-2:2021 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed
- KS M ISO 1628-1-2012(2017) Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
- KS M ISO 1628-1-2012(2022) Plastics-Determination of the viscosity of polymers in dilute solution using capillary viscometers-Part 1:General principles
- KS M ISO 2884-2-2021 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed
- KS M ISO 1628-2:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins
- KS L ISO 7884-5-2003(2018) Glass-Viscosity and viscometric fixed points-Part 5:Determination of working point by sinking bar viscometer
- KS M 2450-2022 Test method for low-temperature viscosity of automotive fluid lubricants measured by brookfield viscometer
- KS M ISO 1628-1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
- KS M ISO 1628-2-2020 Plastics-Determination of the viscosity of polymers in dilute solution using capillary viscometers-Part 2:Poly(vinyl chloride) resins
- KS M ISO 12058-1:2006 Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method
- KS L ISO 7884-5-2003(2023) Glass-Viscosity and viscometric fixed points-Part 5:Determination of working point by sinking bar viscometer
- KS M ISO 1628-1-2023 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
- KS L ISO 7884-1-2023 Glass - Viscosity and viscometric fixed points - Part 1: Principles for determining viscosity and viscometric fixed points
- KS M ISO 1628-2-2010(2020) Plastics-Determination of the viscosity of polymers in dilute solution using capillary viscometers-Part 2:Poly(vinyl chloride) resins
- KS M ISO 2884-2-2011(2016) Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
- KS L ISO 7884-1-2003(2023) Glass - Viscosity and viscometric fixed points - Part 1: Principles for determining viscosity and viscometric fixed points
- KS M ISO 2884-1-2007(2017) Paints and varnishes-Determination of viscosity using rotary viscometers-Part 1:Cone-and-plate viscometer operated at a high rate of shear
- KS M ISO 2884-2:2011 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
- KS M ISO 14446:2007 Binders for paints and varnishes-Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions
- KS M ISO 12058-1-2006(2016) Plastics — Determination of viscosity using a falling-ball viscometer — Part 1:Inclined-tube method
- KS M ISO 12058-1-2006(2021) Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method
British Standards Institution (BSI)
- BS 7034-2:1988 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by rotation viscometers
- BS EN ISO 2884-2:2006 Paints and varnishes. Determination of viscosity using rotary viscometers. Disc or ball viscometer operated at a specified speed
- BS 7034-5:1988 Viscosity and viscometric fixed points of glass. Method for the determination of working point by sinking bar viscometer
- BS EN ISO 1628-1:2009+A1:2012 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. General principles
- BS 7034-3:1988 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by fibre elongation viscometer
- BS EN ISO 1628-1:2009 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. General principles
- BS EN ISO 1628-1:1998 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - General principles
- BS EN ISO 1628-1:2021 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. General principles
- BS EN ISO 1628-1:2024 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometer - General principles
- BS EN ISO 1628-2:2020 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers - Poly(vinyl chloride) resins
- BS 7034-1:1988 Viscosity and viscometric fixed points of glass. Recommendations for use in the determination of viscosity and viscometric fixed points
- BS 7034-2:1989 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by rotation viscometers
- BS EN ISO 1628-2:2000 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Poly(vinyl chloride) resins
- BS EN ISO 1628-3:2003 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers-Polyethylenes and polypropylenes
- BS EN ISO 1628-3:2000 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers-Polyethylenes and polypropylenes
- BS EN ISO 2884-1:2000 Paints and varnishes. Determination of viscosity using rotary viscometers. Cone-and-plate viscometer operated at a high rate of shear
- BS EN ISO 1628-3:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Polyethylenes and polypropylenes
- BS 7034-3:1989 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by fibre elongation viscometer
- BS EN ISO 12058-1:2002 Plastics - 12058-1:2002) Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
- BS EN ISO 12058-1:2018 Plastics. Determination of viscosity using a falling-ball viscometer. Inclined-tube method
- BS EN ISO 12058-1:1997 Plastics. Determination of viscosity using a falling-ball viscometer. Inclined-tube method
- BS EN ISO 1628-3:1991 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Polyethylenes and polypropylenes
- BS EN ISO 2555:2018 Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity using a single cylinder type rotational viscometer method
- BS EN ISO 2884-2:2024 Paints and varnishes. Determination of viscosity using rotational viscometers - Relative measurement of viscosity using disc or ball spindles at specified speeds
- BS 2782-7 METHOD 730A:1979 Methods of testing plastics. Rheological properties-Determination of reduced viscosity (viscosity number) and intrinsic viscosity of plastics in dilute solution
- BS EN ISO 2884-1:2006 Paints and varnishes. Determination of viscosity using rotary viscometers. Cone-and-plate viscometer operated at a high rate of shear
- BS EN ISO 2884-2:2003 Paints and varnishes. Determination of viscosity using rotary viscometers. Disc or ball viscometer operated at a specified speed
- BS 7034-4:1988 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by beam bending
- BS 6782-11:1999 Binders for paints. Determination of the viscosity of industrial cellulose nitrate solutions and their classification
- BS ISO 289-1:2005 Rubber, unvulcanized. Determinations using a shearing-disc viscometer-Determination of Mooney viscosity
- BS 7034-5:1989 Viscosity and viscometric fixed points of glass. Method for the determination of working point by sinking bar viscometer
- BS 7034-1:1989 Viscosity and viscometric fixed points of glass. Recommendations for use in the determination of viscosity and viscometric fixed points
- BS ISO 289-1:2015 Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Determination of Mooney viscosity
- BS ISO 25179:2010 Adhesives - Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives
- BS 7034-4:1989 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by beam bending
- BS 188:1977(2012) Methods for Determination of the viscosity of liquids
Japanese Industrial Standards Committee (JISC)
- JIS K 7117:1987 Testing methods for viscosity with a rotational viscometer of resins in the liquid form
- JIS K 7367-1:2002 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 1: General principles
- JIS R 1652:2003 Method for measurement of viscosity with a rotational viscometer of ceramics slurry
- JIS K 2283:1993 Crude petroleum and petroleum products -- Determination of kinematic viscosity and calculation of viscosity index from kinematic viscosity
- JIS K 7367-2:1999 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 2: Poly (vinyl chloride) resins
- JIS Z 8809:2000 Standard liquids for calibrating viscometers
The Directorate General of Specifications and Metrology (DGSM)
- OS GSO ISO 7884-2:2010 Glass -- Viscosity and viscometric fixed points -- Part 2: Determination of viscosity by rotation viscometers
- OS GSO ISO 7884-3:2010 Glass -- Viscosity and viscometric fixed points -- Part 3: Determination of viscosity by fibre elongation viscometer
- OS GSO ISO 2884-2:2013 Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 2: Disc or ball viscometer operated at a specified speed
- OS GSO ASTM D7483:2015 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
- OS GSO ISO 7884-5:2010 Glass -- Viscosity and viscometric fixed points -- Part 5: Determination of working point by sinking bar viscometer
- OS GSO 1078:2002 DETERMINATION OF KINEMATIC VISCOSITY OF TRANSPARENT AND OPAQUE LIQUIDS AND THE CALCULATION OF DYNAMIC VISCOSITY
- OS GSO ISO 12058-1:2015 Plastics -- Determination of viscosity using a falling-ball viscometer -- Part 1: Inclined-tube method
International Organization for Standardization (ISO)
- ISO 7884-2:1987 Glass; Viscosity and viscometric fixed points; Part 2 : Determination of viscosity by rotation viscometers
- ISO 7884-2 Glass - Viscosity and viscometric fixed points - Part 2: Determination of viscosity by rotation viscometers
- ISO 7884-3:1987 Glass — Viscosity and viscometric fixed points — Part 3: Determination of viscosity by fibre elongation viscometer
- ISO/CD 2884-2:2023 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed
- ISO 1157:1975 Plastics — Cellulose acetate in dilute solution — Determination of viscosity number and viscosity ratio
- ISO 2884-2:2003 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
- ISO 1628-1:1998 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscosimeters - Part 1: General principles
- ISO 1157:1990 Plastics; cellulose acetate in dilute solution; determination of viscosity number and viscosity ratio
- ISO 1628-2:1998 Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins
- ISO 1628-1:2024 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
- ISO/CD 1628-1:2004 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
- ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
- ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
- ISO 7884-5:1987 Glass; Viscosity and viscometric fixed points; part 5 : Determination of working point by sinking bar viscometer
- ISO 12058-1:2018 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
- ISO 1628-2 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins
- ISO 12058-1:1997 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
- ISO 2884-1:1999 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear
- ISO 1628-1:2009/Amd 1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles; Amendment 1
- ISO 1628-2:2020 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 2: Poly(vinyl chloride) resins
- ISO 7884-1:1987 Glass; Viscosity and viscometric fixed points; Part 1 : Principles for determining viscosity and viscometric fixed points
- ISO 1628-3:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes
- ISO 7884-4:1987 Glass; Viscosity and viscometric fixed points; Part 4 : Determination of viscosity by beam bending
- ISO/DIS 18335 Petroleum products and related products — Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density – Method by constant pressure viscometer
- ISO 1191:1975 Plastics — Polyethylenes and polypropylenes in dilute solution — Determination of viscosity number and of limiting viscosity number
National Standardisation Body (ASRO)
- STAS SR ISO 7884-2:1996 Glass - Viscosity and viscometric fixed points Part 2: Determination of viscosity by rotation viscometers
- STAS SR ISO 7884-3:1996 Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer
- STAS SR ISO 7884-5:1995 Glass - Viscosity and viscometric fixed points - Part 5: Determination of working point by sinking bar viscometer
- STAS 8940-1971 PRINTING INKS Determination of viscosity by means of Laray apparatus
- STAS 11986-1985 POI.YESTERIC FIBRES Viscosity index, determination of dilute solutions
- STAS SR ISO 7884-1:1995 Glass - Viscozity and viscometric fixed points Part 1: Principles for determining viscosity and viscometric fixed
Spanish Association for Standardization (UNE)
- UNE 43725-2:1991 GLASS. VISCOSITY AND VISCOMETRIC FIXED POINTS. PART 2: DETERMINATION OF VISCOSITY BY ROTATION VISCOMETERS.
- UNE-EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)
- AENOR UNE-EN ISO 2884-2:2007 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
- UNE-EN ISO 1628-2:2022 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:2020)
- AENOR UNE-EN ISO 1628-1/A1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2009)
- UNE-EN ISO 1628-1:1999 PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS. PART 1: GENERAL PRINCIPLES. (ISO 1628-1:1998)
- UNE-EN 12092:2002 Adhesives - Determination of viscosity.
- UNE-EN ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2009)
- AENOR UNE-EN ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2009)
Association Francaise de Normalisation
- NF EN ISO 2884-2:2006 Paints and varnishes - Determination of viscosity using rotating viscometers - Part 2: disc or ball viscometer operating at specified speed
- NF T30-029-2*NF EN ISO 2884-2:2006 Paints and varnishes -Determination of viscosity using rotary viscometers - Part 2 : disc or ball viscometer operated at a specified speed
- NF T51-061-1/A1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1 : general principles.
- NF T76-102:1982 Adhesives. Measuremetn of the brookfield viscosity of adhesives in the liquid state.
- NF T51-061-1*NF EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1 : general principles
- NF M07-097:2000 Water-in-diesel emulsions - Determination of kinematic viscosity and calculation of dynamic viscosity
- NF EN ISO 1628-1:2024 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1 : general principles
- NF T30-029-1*NF EN ISO 2884-1:2006 Paints and varnishes -Determination of viscosity using rotary viscometers - Part 1 : cone-and-plate viscometer operated at a high rate of shear
- NF T51-439-1:2004 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1 : inclined-tube method.
- NF T51-061-1*NF EN ISO 1628-1:2024 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1 : general principles
- NF EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: general principles
- NF EN 13302:2018 Bitumens and bituminous binders - Determination of the dynamic viscosity of bituminous binders using a rotating viscometer
- NF T51-061-2*NF EN ISO 1628-2:2020 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2 : poly(vinyl chloride) resins
- NF EN ISO 1628-2:2020 Plastics - Determination of viscosity of polymers in dilute solution using capillary viscometers - Part 2: poly(vinyl chloride) resins
- NF T51-212:1998 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscosimeters. Part 1 : general principles.
- NF EN ISO 1628-3:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: polyethylenes and polypropylenes
- NF EN 12092:2002 Adhesives - Determination of viscosity
- NF T51-061-3*NF EN ISO 1628-3:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3 : polyethylenes and polypropylenes
- NF T60-122:2019 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity by automated Houillon viscometer
Danish Standards Foundation
- DANSK DS/EN ISO 2884-2:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
- DS/ISO 1628-1:2021 Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 1: General principles
- DS/EN ISO 2884-2:2006 Paints and varnishes – Determination of viscosity using rotary viscometers – Part 2: Disc or ball viscometer operated at a specified speed
- DANSK DS/ISO 1628-1:2021 Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 1: General principles
- DANSK DS/EN ISO 1628-1/A1:2009 Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 1: General principles
- DS/EN ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
- DS/EN ISO 1628-2:1999 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins
- DANSK DS/ISO 2884-2:2024 Paints and varnishes – Determination of viscosity using rotational viscometers – Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds
- DANSK DS/EN 12092:2001 Adhesives - Determination of viscosity
- DS/EN ISO 1628-3:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes
- DANSK DS/ISO 1628-2:2020 Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 2: Poly(vinyl chloride) resins
- DS/EN ISO 1628-1:2021 Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 1: General principles (ISO 1628-1:2021)
- DANSK DS/EN ISO 1628-1:2021 Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 1: General principles (ISO 1628-1:2021)
- DS/EN 12092:2001 Adhesives - Determination of viscosity
- DANSK DS/EN ISO 1628-3:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes
- DS/EN ISO 1628-1/A1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles - Amendment 1
Finnish Standards Institute
- SFS 3758-1977 Viscosity measurement with a falling ball viscometer
American National Standards Institute (ANSI)
- ANSI/ASTM D5225:1998 Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer (08.03)
Yugoslav Association for Standardization
- JUS B.E8.300-1989 Glass. Viscosity and viscometric fixed points. Principies for detarmining viscosity and viscometric fixed points
Netherlands Institute for Standardization
- NEN 3026-1981 Petroleum products - Determination of kinematic viscosity by means of viscosimeters
Standards Norway
- NS-EN ISO 2884-2:2006 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
- NS-EN ISO 1157:1999 Plastics — Cellulose acetate in dilute solution — Determination of viscosity number and viscosity ratio (ISO 1157:1990)
- NS-EN 12092:2001 Adhesives — Determination of viscosity
- NS-EN ISO 1628-1:2021 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles (ISO 1628-1:2021)
- NS-EN ISO 1628-1:2009 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles (ISO 1628-1:2009)
- NS-EN ISO 1628-1:1998 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles (ISO 1628-1:1998)
- NS-EN ISO 1628-2:1998 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 2: Poly(vinyl chloride) resins (ISO 1628-2:1998)
Bureau of Indian Standards
- IS 17335-2020 Determination of Apparent Viscosity of Bituminous Binders at Elevated Temperature by Rotational Viscometer
American Association of State Highway and Transportation Officials
- TP 121-2016 Standard Method of Test for Determining the Viscosity of Emulsified Asphalt by a Rotational Paddle Viscometer
- AASHTO T 382-2018 Standard Method of Test for Determining the Viscosity of Emulsified Asphalt by a Rotational Paddle Viscometer
- AASHTO T 316-2022 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
- T 316-2010 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
- T 316-2006 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
- T 316-2011 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
- AASHTO TP 121-2016 Standard Method of Test for Determining the Viscosity of Emulsified Asphalt by a Rotational Paddle Viscometer
- T 316-2013 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
- T 382-2018 Standard Method of Test for Determining the Viscosity of Emulsified Asphalt by a Rotational Paddle Viscometer
- AASHTO T 316-2010 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
- TP48-1997 Standard Test Method for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
- AASHTO T 316-2013(2017) Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
- AASHTO T 316-2013 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
- AASHTO T 382-2020 Standard Method of Test for Determining the Viscosity of Emulsified Asphalt by a Rotational Paddle Viscometer
- AASHTO T 382-2022 Standard Method of Test for Determining the Viscosity of Emulsified Asphalt by a Rotational Paddle Viscometer
- AASHTO T 316-2006 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
- AASHTO T 316-2019 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
- AASHTO T 316-2011 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
- T 316-2004 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
- AASHTO T 202-2003 Standard Method of Test for Viscosity of Asphalts by Vacuum Capillary Viscometer
- AASHTO TP48-1997 Standard Test Method for Viscosity Determination of Asphalt Binder Using Rotational Viscometer 2000 Edition
- T 316-2002 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer (HM-22; Part IIB; Formaly AASHTO TP 4)
Indonesia Standards
- SNI 06-4167-1996 Cara uji kekentalan cat dengan alat viscometer stormer
- SNI ISO 5351:2012 Pulp - Cara uji bilangan viskositas limit (viskositas intrinsik) dalam larutan kuprietilendiamina (CED)
Gosstandart of Russia
- GOST 11034-1982 Polyamides. Method for determination of the viscosity number of dilute solution
- GOST 32191-2013 Petroleum asphalts. Determination of viscosity by vacuum capillary viscometer
- GOST 32271-2013 Petroleum asphalts. Determination of viscosity at elevated temperatures using a rotational viscometer
- GOST 1929-1987 Petroleum products. Methods of test for determination of dynamic viscosity by rotary viscosimeter
- GOST 9070-1975 Viscosimeters for determination of relative viscosity of paint and lacquer materials. Specifications
- GOST 11034-2018 Polyamides. Method for determination of the viscosity number of dilute solutions
- GOST 25276-1982 Polymers. Method for determination of viscosity by rotary viscosimeter at a given shear rate
- GOST 26581-1985 Greases. Method of test for effective viscosity on a rotary viscosimeter
Chile Instituto Nacional de Normalización
- INDITECNOR 22-3 Viscosity: Measurement of kinematic viscosity in a capillary viscometer
Austrian Standards
- OENORM EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)
COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)
- TCVN 6090-1-2010 Rubber, unvulcanized.Determinations using a shearing-disc viscometer.Part 1: Determination of Mooney viscos
GM North America
- GM GM9017P-1988 Test for Bond Strength of Solvent Type Adhesives
Swiss Association for Standardization (SNV)
- SN 213 185-1981 Countersinks 90°
- SN EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)
Lithuanian Standards Office
- LST EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)
- LST EN 12092-2003 Adhesives - Determination of viscosity