The relationship between specific rotation and concentration

The relationship between specific rotation and concentration, Total:126 items.

The international standard classification for "The relationship between specific rotation and concentration" includes: Chemical reagents , Ergonomics .

The Chinese standard classification for "The relationship between specific rotation and concentration" includes: Chemical reagent in general , Human Engineering .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 613-1988 Chemical reagent-General method for the determination of specific optical rotation
GB/T 613-2007 Chemical reagent - General method for the determination of specific optical rotatory power (specific optical rotation)
GB/T 44382-2024 Ergonomics—Accessible design—Specification of age-related luminance contrast for coloured light

Taiwan Provincial Standard of the People's Republic of China

CNS 14818-2004 Method of test for density of smoke generated by solid materials -Specificoptical method of vertical type
CNS 4448-1992 Method of Test for Stiffness in Torsion of Plastics as a Function of Temperature

Group Standards of the People's Republic of China

T/NAIA 0193-2023 Determination of Concentration and Purity of Single-chain Antibody Eukaryotic Expression Plasmid DNA by UV Spectrophotometry

SCC

VDI 2310 BLATT 12-2004 Maximum emission values for the protection of humans — Maximum emission concentrations for nitrogen dioxide
AWWA JAW34110 Journal AWWA — Technical Note: Comparing Predicted and Observed Concentrations of DBPs
AWWA JAW60510 Journal AWWA — Low-Level Turbidity Measurements: A Comparison of Instruments
BS 3045:1958 The relation between the sone scale of loudness and the phon scale of loudness level
AWWA WQTC60788 FPA Intensity Does Not Always Correlate with Vapor or Aqueous Phase Concentration of Problematic Odorous Compounds
VDI 2310 BLATT 15-2001 Maximum emission values for the protection of humans — Maximum emission concentrations for ozone
DANSK DS/EN ISO 24502:2011 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light
AWWA JAW55968 Comparing Total HAA and Total THM Concentrations Using ICR Data
SN-CEN/TR 15547:2007 Workplace atmospheres — Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
DANSK DS/CEN/TR 15547:2007 Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
CEI UNEL 35012:2010 Contrassegni e classificazione dei cavi in relazione al fuoco
NS 3656:1993 Concrete testing - Rate of reaction as a function of temperature
AWWA JAW6176 Journal AWWA — The Relationship Between Asbestos and Turbidity in Raw Water
NS-EN ISO 24502:2010 Ergonomics — Accessible design — Specification of age-related luminance contrast for coloured light (ISO 24502:2010)
DANSK DS/EN ISO 14644-2:2016 Cleanrooms and associated controlled environments – Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
AWWA ACE65466 Low Dose Risks from Bromate: The Relationship between Drinking Water Concentrations and the Actual Dose to Susceptible Organs in Rats and Humans, Pre-systemic Decomposition
DANSK DS/EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
NS-EN 13205-4:2014 Workplace exposure — Assessment of sampler performance for measurement of airborne particle concentrations — Part 4: Laboratory performance test based on comparison of concentrations

ESDU - Engineering Sciences Data Unit

AERO 00.01.08 A-1982 Specific heat capacities and their ratio as functions of temperature for several common gases.

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 2891.14.5:1999 Methods of sampling and testing asphalt - Field density tests - Density ratio of compacted asphalt

International Organization for Standardization (ISO)

ISO/DTS 18222.2:2023 Natural gas — Correlation between odorant concentration in air and odour intensity
ISO 19212:2006 Adhesives - Determination of temperature dependence of shear strength
ISO/TR 8091:1983 Textiles; Twist factor related to the Tex System
ISO 10980:1995 Validation of the strength of reference solutions used for measuring concentrations
ISO/TS 20273:2017 Guidelines on weld quality in relationship to fatigue strength
ISO 14644-2:2015 Cleanrooms and associated controlled environments - Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration

American Society for Testing and Materials (ASTM)

ASTM E344-00 Terminology Relating to Thermometry and Hydrometry
ASTM E344-19e1 Terminology Relating to Thermometry and Hydrometry
ASTM E344-08 Terminology Relating to Thermometry and Hydrometry
ASTM E344-19 Terminology Relating to Thermometry and Hydrometry
ASTM E344-02 Terminology Relating to Thermometry and Hydrometry
ASTM E344-10 Terminology Relating to Thermometry and Hydrometry
ASTM E344-20 Terminology Relating to Thermometry and Hydrometry
ASTM E344-16 Terminology Relating to Thermometry and Hydrometry
ASTM E344-18 Terminology Relating to Thermometry and Hydrometry
ASTM D5133-12 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-05(2011) Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D6245-24 Standard Guide on the Relationship of Indoor Carbon Dioxide Concentrations to Indoor Air Quality and Ventilation
ASTM E344-06 Terminology Relating to Thermometry and Hydrometry

Korean Agency for Technology and Standards (KATS)

KS A ISO 10980-2012(2017) Validation of the strength of reference solutions used for measuring concentrations
KS A ISO 24502-2019 Ergonomics — Accessible design — Specification of age-related luminance contrast for coloured light
KS K ISO TR 8091-2009(2014) Textiles－Twist factor related to the Tex System
KS R 5039-1972(2011) Dimmer Switches for Automobiles
KS A ISO 10980:2012 Validation of the strength of reference solutions used for measuring concentrations
KS B OIMLR 44-2006 Alcoholometers and alcohol hydrometers and thermometers for use in alcoholometry
KS I ISO 14644-2-2022 Cleanrooms and associated controlled environments — Part 2:Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration

Association Francaise de Normalisation

NF M60-407*NF ISO 10980:1998 Validation of the strength of reference solutions used for measuring concentrations.
NF EN ISO 24502:2011 Ergonomics - Accessible design - Specification of age-related luminance contrast for colored light
FD X43-284*FD CEN/TR 15547:2007 Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
FD CEN/TR 15547:2007 Workplace atmospheres - Calculation of the concentration of aerosol fractions linked to health from the concentration measured using a sampling device with known performance characteristics
NF X44-101-2*NF EN ISO 14644-2:2016 Cleanrooms and associated controlled environments - Part 2 : monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
NF T51-032:1976 Plastics. Determination of viscosity ratio of polyamide resins in concentrated solution.
NF B30-010:1967 Glass. Vocabulary of characteristic temperatures related to glass viscosities.

AGMA - American Gear Manufacturers Association

14FTM21-2014 On the Correlation of Specific Film Thickness and Gear Pitting Life

American Gear Manufacturers Association

AGMA 14FTM21-2014 On the Correlation of Specific Film Thickness and Gear Pitting Life

GSO

GSO ISO 17744:2013 Plastics -- Determination of specific volume as a function of temperature and pressure (pvT diagram) -- Piston apparatus method
GSO ISO 16322-1:2013 Textiles -- Determination of spirality after laundering -- Part 1: Percentage of wale spirality change in knitted garments
GSO ISO 125:2015 Natural rubber latex concentrate -- Determination of alkalinity

British Standards Institution (BSI)

BS ISO 19212:2006 Adhesives - Determination of temperature dependence of shear strength
BS EN ISO 14644-2:2015 Cleanrooms and associated controlled environments. Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
BS EN ISO 14644-9:2022 Cleanrooms and associated controlled environments. Assessment of surface cleanliness for particle concentration
BS EN 13205-4:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on comparison of concentrations
BS EN ISO 14644-1:2015 Cleanrooms and associated controlled environments. Classification of air cleanliness by particle concentration
BS 5471:1977 Specification for thermometer for use with alcohol hydrometers

PT-IPQ

NP 2142-1986 Alcoholic beverages. Measurement of concentration and related densities

API - American Petroleum Institute

API PUBL 27-30700- STUDIES ON THE EVALUATION OF PROBLEMS ASSOCIATED WITH THE MEASUREMENT OF LOW CONCENTRATIONS OF CARBOXYHEMOGLOBIN

Spanish Association for Standardization (UNE)

UNE 21-320 Pt.4-1989 Determination of absolute and relative concentrations of liquid turbine insulating oils of power technology installations (hydrometer and colorimeter method)
UNE-EN ISO 24502:2010 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light (ISO 24502:2010) (Endorsed by AENOR in February of 2011.)
UNE-EN ISO 14644-2:2016 Cleanrooms and associated controlled environments - Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration (ISO 14644-2:2015)

RO-ASRO

STAS 10466-1975 PLASTICS Determination of the viscosity ratio of polyamides in concentrated solutions
STAS 8170/2-1989 ORGANIC DYES Delivery concentration determination by comparative dyeings method

RU-GOST R

GOST R 51069-1997 Crude petroleum and petroleum products. Determination of density, relative density and API gravity. Hydrometer method
GOST 28326.5-1989 Technical liquid ammonia. Determination of iron mass concentration by method of photocolorimetry
GOST R 53954-2010 Wine production. Identification. Method of determining the mass concentration of ash and ash alkalinity
GOST R ISO 24502-2012 Ergonomics design. Specification of age-related luminance contrast for coloured light
GOST 26423-1985 Soils. Methods for determination of specific electric conductivity, pH and solid residue of water extract

German Institute for Standardization

DIN EN ISO 24502:2011-04 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light (ISO 24502:2010); German version EN ISO 24502:2010
DIN 58932-4:2003 Haematology - Determination of the concentration of blood corpuscles in blood - Part 4: Reference procedure for the determination of the concentration of leucocytes
DIN EN ISO 1675:1998 Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985); German version EN ISO 1675:1998
DIN EN ISO 14644-2:2016-05 Cleanrooms and associated controlled environments - Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration (ISO 14644-2:2015); German version EN ISO 14644-2:2015
DIN EN ISO 14644-2 E:2014-11 Cleanrooms and associated controlled environments Part 2: Using particle concentration monitoring to provide evidence of cleanroom performance related to air cleanliness (draft)
DIN EN ISO 14644-2 E:2010-12 Cleanrooms and associated controlled environments Part 2: Using particle concentration monitoring to provide evidence of cleanroom performance related to air cleanliness (draft)
DIN EN 13205-4:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version EN 13205-4:2014

Danish Standards Foundation

DS/CEN/TR 15547:2007 Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
DS/EN ISO 24502:2011 Ergonomics – Accessible design – Specification of age-related luminance contrast for coloured light

American National Standards Institute （ANSI)

ANSI/ASAE D241.4-1992(2012) Density, Specific Gravity, and Mass-Moisture Relationships of Grain for Storage
ANSI/ASAE D241.4-1993 Density, Specific Gravity, and Weight Moisture Relationships of Grain for Storage

European Committee for Standardization (CEN)

CEN/TR 15547:2007 Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
EN ISO 1675:2022 Plastics - Liquid resins - Determination of density by the pycnometer method (ISO 1675:2022)
FprCEN/TS 18044 Ambient air - Determination of the concentration of levoglucosan - Chromatographic method
EN ISO 14644-2:2015 Cleanrooms and associated controlled environments - Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
EN ISO 1675:1998 Plastics - Liquid Resins - Determination of Density by the Pyknometer Method ISO 1675:1985

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 3660-1993 Measurement of Pressure- Temperature- Concentration Relations for Mixtures of R-12/ Mineral Oil and R-134a Synthetic Oil
ASHRAE 4204-1998 Sampling Interval Magnitude Relation to Digital PI Control System Performance

BSI

DANSK DS/CEN/TS 18044:2024 Ambient air – Determination of the concentration of levoglucosan – Chromatographic method
BS PD CEN/TS 18044:2024 Ambient air. Determination of the concentration of levoglucosan. Chromatographic method
SN-CEN/TS 18044:2024 Ambient air - Determination of the concentration of levoglucosan - Chromatographic method

NL-NEN

NPR 3637-1994 Surface roughness. Guideline for the relation between the function of a workpiece surface and the roughness value

DIN CEN/TS

DIN CEN/TS 18044:2024 Ambient air - Determination of the concentration of levoglucosan - Chromatographic method; German version CEN/TS 18044:2024

Japanese Industrial Standards Committee (JISC)

JIS B 9920-2:2019 Cleanrooms and associated controlled environments -- Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration

NO-SN

NS 3656-1993 Concrete testing. Rate of reaction as a function o temperature

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

RAPPORT BT.484-2 FRENCH-1986 RATIO OF PICTURE-SIGNAL TO SYNCHRONIZING-SIGNAL

HU-MSZT

MSZ 8888/3-1971 Environmentally related testing. Humidity, heat test

American Welding Society (AWS)

WRC 035:1957 The Tensile Properties of Selected Steels as a Function of Temperature

BR-ABNT

ABNT MB-137R-1954 Ammonium hydroxide concentration and density

Standard Association of Australia （SAA）

AS ISO 14644.2:2017 Cleanrooms and associated controlled environments, Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
AS 4215.1:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire extinguishing concentrations
AS 4215.2:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire inerting concentrations
AS 2884.4:1997 Heavy mineral sand concentrates - Sampling - Determination of precision and bias

U.S. Military Regulations and Norms

ARMY MIL-DTL-46035 C VALID NOTICE 1-2004 TITANIUM ALLOY: HIGH STRENGTH, WROUGHT (FOR CRITICAL COMPONENTS)
ARMY MIL-DTL-46035 C-1999 TITANIUM ALLOY: HIGH STRENGTH, WROUGHT (FOR CRITICAL COMPONENTS)

International Telecommunication Union (ITU)

ITU-T G.225-1988 Recommendations relating to the accuracy of carrier frequencies

CU-NC

NC 23-02-1968 Evaluation of sulphuric acid concentration by measurement of density

WRC - Welding Research Council

BULLETIN 35-1957 THE TENSILE PROPERTIES OF SELECTED STEELS AS A FUNCTION OF TEMPERATURE

TR-TSE

TS 2256-1976 LIMITS AND FITS — SERIES OF ANGLES AND SLOPES ON WEDGES AND PRISMS

Canadian General Standards Board （CGSB)

CGSB 1-GP-71 METH 4.7-1974 Methods of Testing Paints and Pigments Consistency Consistency of Putty by Means of Gardner Mobilometer

PL-PKN

PN E06714-1988 Rotating electrical machines Vibrations Measurement and limits of the vibration severity

GOST

GOST R 70378.4-2023 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Part 4. Laboratory performance test based on comparison of concentrations
GOST 34798-2021 Brewing products. Identification. Photoelectrocalorimetric method of determination of mass concentration of polyphenols

IN-BIS

IS 6339-1971 Analytical methods for sediment concentration, particle size distribution and specific gravity in rivers and channels

Others: The relationship between specific rotation and temperature,The relationship between specific rotation and concentration