Agilent liquid phase pressure fluctuates greatly

Agilent liquid phase pressure fluctuates greatly, Total:104 items.

The international standard classification for "Agilent liquid phase pressure fluctuates greatly" includes: Control components , Pumps and motors , Piping and couplings .

The Chinese standard classification for "Agilent liquid phase pressure fluctuates greatly" includes: Hydraulic and pneumatic device .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 36703-2018 Hydraulic fluid power—Pressure switches—Mounting surfaces

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 41980.2-2022 Hydraulic fluid power—Determination method of pressure ripple levels generated in systems and components—Part 2: Hydraulic pumps(simplified method)
GB/T 7937-2008 Fluid power systems and components - Connectors and associated components - Nominal pressures
GB/T 41980.1-2022 Hydraulic fluid power—Determination method of pressure ripple levels generated in systems and components—Part 1:Hydraulic pumps(precise method)
GB/T 7937-2002 Fluid power systems and components--Connectors and associated components--Nominal pressures

未注明发布机构

DIN EN 983:1996 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics

CZ-CSN

CSN 21 0701 Za-1967 Czech national standard 21 0701 safety rules. General provisions for hydraulic presses
CSN 21 0714 Zc-1987 Czech national standard 210714 safety regulations. Mechanical press brake

SE-SIS

SIS SS-ISO 6264:1989 Hydraulic fluid power — Pressure-relief valves — Mounting surfaces
SIS SS-ISO 6263:1989 Hydraulic fluid power — Compensated flow- control valves — Mounting surfaces

British Standards Institution (BSI)

PD IEC TS 62882:2020 Hydraulic machines. Francis turbine pressure fluctuation transposition
BS ISO 16873:2011 Hydraulic fluid power. Pressure switches. Mounting surfaces
BS ISO 6264:1998 Hydraulic fluid power - Pressure-relief valves - Mounting surfaces
BS ISO 10767-3:2000 Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components. Method for motors
BS ISO 10767-3:1999 Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Method for motors
BS EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
BS ISO 10767-1:1996 Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Precision method for pumps
BS ISO 10767-2:1999 Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Simplified method for pumps
BS ISO 6981:1996 Hydraulic fluid power - Cylinders - Rod end plain eyes - Mounting dimensions
BS ISO 6982:1992(1998) Hydraulic fluid power — Cylinders — Rod end spherical eyes — Mounting dimensions
BS EN 88-1:2011 Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures up to and including 50 kPa
BS ISO 4401:1996 Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
BS ISO 10762:1998 Hydraulic fluid power. Cylinder mounting dimensions. 10 MPa (100 bar) series
BS ISO 6981:1992 Hydraulic fluid power. Cylinders. Rod end plain eyes. Mounting dimensions
BS ISO 10762:1997 Hydraulic fluid power - Cylinder mounting dimensions - 10 MPa (100 bar) series
BS ISO 4401:2005 Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
24/30466269 DC BS ISO 10767-3 Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 3: Method for motors

SCC

BS PD IEC TS 62882:2020 Hydraulic machines. Francis turbine pressure fluctuation transposition
BS ISO 16873:2002 Hydraulic fluid power. Pressure switches. Mounting surfaces
10/30215350 DC BS ISO 16873. Hydraulic fluid power. Pressure switches. Mounting surfaces
BS 6494-3:1989 Hydraulic fluid power valve mounting surfaces-Specification for pressure-relief valves
BS ISO 4413:1998 Hydraulic fluid power. General rules relating to systems
ANSI B11.2-1995 Machine Tools - Hydraulic Power Presses, Safety Requirements for Construction, Care, and Use
BS 6335-1:1990 Methods for determining pressure ripple levels generated in hydraulic fluid power systems and components-Secondary source methods for pumps
BS ISO 4401:1994 Hydraulic fluid power. Four-port directional control valves. Mounting surfaces
DIN EN 1804-3 E:2019 Draft Document - Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic and electro hydraulic control systems; German and English version prEN 1804-3:2019

GM Europe

GME GMI L-9A-24-2007 Hydraulic Rack-and-Pinion Power Steering - Maximum Steering Pressure (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##), Global Delta d (34##) and S-4470/50. It is Superceded for all future projects and r

Korean Agency for Technology and Standards (KATS)

KS B ISO 16873-2006(2011) Hydraulic fluid power－Pressure switches－Mounting surfaces
KS B ISO 4401-2013 Hydraulic fluid power－Four-port directional control valves－Mounting surfaces
KS B ISO 6263-2013 Hydraulic fluid power－Compensated flow－control valves－Mounting surfaces
KS B ISO 6981-2013 Hydraulic fluid power－Cylinders－Rod end plain eyes－Mounting dimensions
KS B ISO 10762-2013 Hydraulic fluid power－Cylinder mounting dimensions－10MPa ( 100bar ) series
KS B ISO 6072-2013 Hydraulic fluid power－Compatibility between elastomeric materials and fluids
KS B ISO 10767-3-2002(2012) Hydraulic fluid power－Determination of pressure ripple levels generated in systems and components－Part 3 : Method for motors
KS B ISO 10767-3:2002 Hydraulic fluid power-Determination of pressure ripple levels generated in systems and components-Part 3 : Method for motors
KS B 8213-2009(2019) Pressure regulators and associated safety devices for gas appliances－Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
KS B ISO 10767-3:2013 Hydraulic fluid power－Determination of pressure ripple levels generated in systems and components－Part 3 : Method for motors
KS B ISO 6263-2004(2009) Hydraulic fluid power－Compensated flow－control valves－Mounting surfaces
KS B ISO 4401-2003(2008) Hydraulic fluid power－Four-port directional control valves－Mounting surfaces

GSO

BH GSO ISO 16873:2016 Hydraulic fluid power -- Pressure switches -- Mounting surfaces
BH GSO ISO 6264:2016 Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces
GSO ISO 6264:2015 Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces
OS GSO ISO 4401:2015 Hydraulic fluid power -- Four-port directional control valves -- Mounting surfaces
BH GSO ISO 4401:2016 Hydraulic fluid power -- Four-port directional control valves -- Mounting surfaces

PL-PKN

PN M73270-01-1991 Hydraulic fluid power Code for identification of valve mounting surfaces
PN M73270-05-1991 Hydraulic fluid power Compensated flow-control valves Mounting surfaces
PN M73270-02-1991 Hydraulic fluid power Four-port directional control valves Mounting surfaces

RO-ASRO

STAS 8537-1985 Hydraulic power FILTERS Special technical requirements for quality

Japanese Industrial Standards Committee (JISC)

JIS B 8667:2013 Hydraulic fluid power -- Pressure switches -- Mounting surfaces
JIS B 8667:2004 Hydraulic fluid power -- Pressure switches -- Mounting surfaces
JIS B 8666:2001 Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces
JIS B 8357:2000 Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces
JIS B 8658:1989 Rules of electronic amplifier for electro-hydraulic control valves
JIS B 8357:2022 Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces

Association Francaise de Normalisation

NF E48-427*NF ISO 16873:2012 Hydraulic fluid power - Pressure switches - Mounting surfaces
NF ISO 16873:2012 Hydraulic transmissions - Pressure switches - Installation plans
NF ISO 6264:2000 Hydraulic transmissions - Pressure limiters - Installation plan
NF E48-201:1999 Hydraulic fluid power. General rules relating to systems.
NF E48-390-1*NF ISO 10767-1:2015 Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 1 : method for determining source flow ripple and source impedance of pumps
NF E48-391*NF ISO 10767-2:2000 Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Simplified method for pumps
NF E48-390:1997 Hydraulic fluid power. Détermination of pressure ripple levels generated in systems and components. Part 1 : precision method for pump.
NF M88-780:2021 Installations d'hydrocarbures liquéfiés en récipients - Tuyaux Flexibles métalliques onduleux pour GPL en phase gazeuse à usage domestique en installation extérieure pour des pressions allant jusqu'à 20 bar
NF M88-781:2014 Installations for liquid hydrocarbons - Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures -

International Organization for Standardization (ISO)

ISO 16873:2002 Hydraulic fluid power - Pressure switches - Mounting surfaces
ISO 4126-10:2010 Safety devices for protection against excessive pressure - Part 10: Sizing of safety valves for gas/liquid two-phase flow
ISO 16873:2002/Amd 1:2005 Hydraulic fluid power - Pressure switches - Mounting surfaces; Amendment 1
ISO 10767-1:2015 Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 1: Method for determining source flow ripple and source impedance of pumps
ISO 10767-3:1999 Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 3: Method for motors

AT-ON

ONORM ISO 2943:1982 Hydraulic fluid power; fllter elements veriflcation of material compatibility with fluids
ONORM ISO 5783:1983 Hydraulic fluid power; code for identification of valve mounting surfaces
ONORM ISO 4401:1981 Hydraulic fluid power; four port directional control valves; mounting surfaces

American National Standards Institute （ANSI)

ANSI B11.2-2013(R2020) Safety Requirements for Hydraulic and Pneumatic Presses

SAE - SAE International

SAE AS85188-2002 Riveter@ Power@ Pneumatic-Hydraulic Blind Rivet Installation
SAE AS85188A-2013 Riveter@ Power@ Pneumatic-Hydraulic Blind Rivet Installation

FI-SFS

SFS-ISO 6022:1987 In case of interpretation disputes the English textapplies
SFS-ISO 6982:1987 In case of interpretation disputes the English textapplies

German Institute for Standardization

DIN 24336:1980-06 Fluidpower; hydraulic cylinder 100 bar, mounting dimensions
DIN 24336:1980 Fluidpower; hydraulic cylinder 100 bar, mounting dimensions
DIN EN 982:2009 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics (includes Amendment A1:2008); English version of DIN EN 982:2009-06
DIN 24554:1990 Fluidpower; hydraulic cylinder 160 bar compact; mounting dimensions
DIN EN 983:2009 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics (includes Amendment A1:2008); English version of DIN EN 983:2009-06
DIN EN 16129:2018-08 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures; German and English version prEN 16129...
DIN EN 16129:2013-08 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures; German version EN 16129:2013 / Note: T...

United States Navy

NAVY MS18282 VALID NOTICE 2-1991 RELIEF VALVE OPERATING CHARACTERISTICS VERSUS MAXIMUM OPERATING PRESSURE FOR LIQUID SERVICE
NAVY MS18282-1968 RELIEF VALVE OPERATING CHARACTERISTICS VERSUS MAXIMUM OPERATING PRESSURE FOR LIQUID SERVICE
NAVY MS18282 VALID NOTICE 1-1987 RELIEF VALVE OPERATING CHARACTERISTICS VERSUS MAXIMUM OPERATING PRESSURE FOR LIQUID SERVICE

ESDU - Engineering Sciences Data Unit

ESDU 84013 B-2007 Fluid transients in pipes. Reduction and control of pressure surges in liquids.
ESDU 84013 A-1984 FLUID TRANSIENTS IN PIPES Reduction and control of pressure surges in liquids

European Committee for Standardization (CEN)

EN 16330:2013 Winter and road service area equipment - Power system and related controls - Power hydraulic system and electric
EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
EN 88-2:2022 Safety and control devices for gas burners and gas burning appliances - Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa

Danish Standards Foundation

DS/EN 16330:2013 Winter and road service area equipment - Power system and related controls - Power hydraulic system and electric

RU-GOST R

GOST R 50191-1992 Hydraulic fluid power. Quick-action couplings. Mounting dimensions and technical requirements

KR-KS

KS B 8213-2009(2024) Pressure regulators and associated safety devices for gas appliances－Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa

Others: