Inspection Department Conductivity Meter Usage System

Inspection Department Conductivity Meter Usage System, Total:119 items.

The international standard classification for "Inspection Department Conductivity Meter Usage System" includes: Measurement of electrical and magnetic quantities , Textile fabrics , Analytical chemistry in general , Industrial process measurement and control , Graphic technology in general , Reactor engineering .

The Chinese standard classification for "Inspection Department Conductivity Meter Usage System" includes: Basic standards and general methods , Electrochemical, thermochemistry and optical profile type analyzer , Display recording instrument , Industrial automation and control device in general , Printing Technology , Nuclear instrument for reactor , Material composition analysis instrument and environment detection instrument in general .

Group Standards of the People's Republic of China

T/CMES 16005-2022 Guidelines for the assessment and inspection of pressure vessel exceeding the design service life
T/CEC 425-2020 Guidelines for acceptance and use and maintenance of gas chromatographs for electric power
T/CEC 301-2020 Code for inspection of safety performance of conduits for power cables

Taiwan Provincial Standard of the People's Republic of China

CNS 11101-1986 Method of Test for Electromechanical Switches-Transmittancy (Luminance)
CNS 9416-1982 Method of Test for High - Tensile Round - Link Steel Chains for Mining
CNS 7228-1981 Finish Test of Wooden Cabinets for Electronic Equipments
CNS 6652-1980 Method of Test for Compensating Lead Wires

Professional Standard - Aerospace

QJ 1963-1990 Static Accuracy Inspection and Evaluation Method of Surface-to-Air Missile Guidance Station

Professional Standard - Military and Civilian Products

WJ 2658-2005 General specification for vehicle-mounted laser beam steering and guidance device tester

Professional Standard - Electron

SJ 20702-1998 General specification of TV tracker for ground to air missile guidance station

未注明发布机构

AS 2452.1:2004(R2017) Non-destructive testing - Determination of thickness - Determination of wall thickness of pipe by the use of radiography
ANSI/IES LM-28-20 GUIDE FOR THE SELECTION, CARE, AND USE OF ELECTRICAL INSTRUMENTS IN THE PHOTOMETRIC LABORATORY

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 27503-2011 Test solutions of electrolytic conductivity analyzer - Preparation method of sodium chloride solutions
GB 8432-1987 Humidity test control for colour fastness to light
GB/T 6833.6-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Conducted susceptibility test
GB/T 11279-1989 Guide to the application of environmental tests to electronic components
GB/T 8432-1987 Humidity test control for colour fastness to light
GB/T 18359-2001 General requirements and test methods of paper and printing qualities for primary and secondary school textbooks
GB/T 11684-1989 Characterisics and test methods of electromagnetic interferences in nucleonic instrumentations for reactors
GB/T 13283-2008 Accuracy class of measuring instruments and display instruments for industrial process measurement and control
GB/T 13283-1991 Accuracy class of measuring instruments and display instruments for industrial process measurement and control
GB/T 3386.2-2007 Electrical and pneumatic analogue chart recorders for use in industrial-process control systems—Part 2:Guidance for inspection and routine testing
GB/T 18359-2009 General requirements and test methods of paper and printing qualities for primary and secondary school textbooks

国家进出口商品检验局

SN/T 0244-1994 "General Rules for Inspection and Certification of Imported Mechanical and Electrical Instruments"

Professional Standard - Commodity Inspection

SN/T 0244-1993 General rules for the inspecting and drafting certificates of machineries electric appliances instruments for import
SN/T 0812-1999 Electrotechnical instrument for export - Rules for the inspection of digital multi-use meter

秦皇岛市市场监督管理局标准化科

DB1303/T 320-2022 Guidelines for formulating inspection plans for special equipment electromechanical

Professional Standard - Machinery

JB/T 8277-1999 Preparation method of standard solution for the measurement of conductivity meter
JB/T 8278-1999 Test solutions of electric conductivity analyzers preparation method of sodium chloride solutions

Professional Standard - Electricity

DL/T 2132-2020 Application guide of capacitive type of voltage detectors at low temperature

Professional Standard - Aviation

HB 6247.9-1989 Basic product drawing management system (instrument, electrical specialty) How to use the technical sheet

Military Standard of the People's Republic of China-General Armament Department

GJB 8696.7-2015 Terminal guided projectile test method Part 7: Circuit resistance detection

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5491.7-2005 Test method of terminally guided projectile Part 7:Circuit resistance detection test and measurement

Professional Standard - Nuclear Industry

EJ/T 626-1992 Requirements for installation, inspection and testing of nuclear power plant electrical, instrumentation and control equipment

Hebei Provincial Standard of the People's Republic of China

DB1304/T 436-2023 Guidelines for periodic inspection of fixed pressure vessels beyond their design service life

German Institute for Standardization

DIN 12791-3:1983 Laboratory glassware; density hydrometers; use and test methods
DIN 18723-6:1990 Field procedure for precision testing of surveying instruments; electro-optical distance measuring instruments for short ranges
DIN 19051-3 Bb.1:1981 Tests for Reprographic Use; DIN-test Assembly (Test Table) for Testing the Microfilming of Technical Drawings; Neutral Density Cards for Use in Practice
DIN 44973-2:1981 Electric humidifier for household use; characteristics of performance, tests
DIN EN ISO 13078:2013-05 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO 13078:2013); German version EN ISO 13078:2013
DIN VDE 0289-4:1988 Definitions for cables, wires and flexible cords for power installation; testing
DIN IEC 61336:1999 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)
DIN 51834-3:2001 Testing of lubricants - Tribological test in translatory oscillation apparatus - Part 3: Determination of tribological behaviour of materials in co-operation with lubricants

American Society for Testing and Materials (ASTM)

ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D3464-96(2014) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM E1817-96 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)
ASTM F78-97(2002) Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards
ASTM D6230-98(2005) Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM D4944-11 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
ASTM F1443-93(2003) Standard Practice for Using 0.008-in. (0.203-mm) Aperture Reflectometers as Test Instruments for Measuring Visual Image Quality of Business Copy Images

RU-GOST R

GOST R 53133.2-2008 Medical laboratory technologies. Quality control of clinical laboratory tests. Part 2. Rules for intra-laboratory quality control of quantitative methods of clinical laboratory tests using control materials
GOST R 53133.3-2008 Medical laboratory technologies. Quality control of clinical laboratory tests. Description of materials for quality control of clinical laboratory investigations
GOST R IEC 61241-1-1-1999 Electrical apparatus for use in the presence of combustible dust. Part 1-1. Electrical apparatus protected by enclosures and surface temperature limitation. Specification for apparatus

CZ-CSN

CSN 25 1970-1968 Cylinder gauges for perpendicularity measurement

HU-MSZT

MSZ 7847-1962 Engine oil viscosity testing using a viscometer at 0C-ON and E temperatures
MSZ 8880/2.lap-1963 Electrical product testing tools and testing methods. Use instruments

SE-SIS

SIS SS IEC 250:1982 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
SIS SS IEC 248:1988 Nuclear instrumen ta tion — Dimensions of planchets usedin nuclear electronic instruments

Association Francaise de Normalisation

NF S90-045:1985 Medico-surgical equipment. Aluminium caps for pharmaceutical use. Quality acceptance.
NF EN ISO 13078:2013 Oral medicine - Dental oven - Test method for measuring temperature using a thermocouple
NF A04-195:1997 Founding. Surface roughness inspection by visualtactile comparators.
NF C19-207*NF EN 60671:2011 Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing
NF S91-277*NF EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple

VE-FONDONORMA

NORVEN 55-4-1960 Detect the length of cotton fibers by using FIBROGRAFO instrument

International Organization for Standardization (ISO)

ISO 6996:2024 Bunkering — Meter verification using master Coriolis mass flow meter
ISO/PRF 6996:2023 Bunkering - Meter verification using master Coriolis mass flow meter
ISO/DIS 6996:2023 Bunkering - Meter verification using master Coriolis mass flow meter
ISO 18175:2004 Non-destructive testing - Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
ISO/PRF 22804 Marine technology — General technical requirement of marine Conductivity-Temperature-Depth (CTD) measuring instrument
ISO 22804:2023 Marine technology — General technical requirement of marine conductivity-temperature-depth (CTD) measuring instrument
ISO 7700-1:2008 Food products - Checking the performance of moisture meters in use - Part 1: Moisture meters for cereals
ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple

IEC - International Electrotechnical Commission

TS 62763-2013 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire IEC/ (Edition 1.0)

British Standards Institution (BSI)

BS ISO 6996:2024 Bunkering. Meter verification using master Coriolis mass flow meter
BS PD IEC/TS 62763:2013 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire
BS 6828-8.1:1987 Dental rotary instruments. Cutters. Specification for steel laboratory cutters
23/30441174 DC BS ISO 6996. Bunkering. Meter verification using master Coriolis mass flow meter
BS ISO 7700-2:2011 Food products. Checking the performance of moisture meters in use. Moisture meters for oilseeds
BS ISO 22804:2023 Marine technology. General technical requirement of marine conductivity-temperature-depth (CTD) measuring instrument
PD IEC/TS 62763:2013 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire
BS 7334-8:1992 Measuring instruments for building construction. Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
BS EN ISO 13078:2013 Dentistry. Dental furnace. Test method for temperature measurement with separate thermocouple

Korean Agency for Technology and Standards (KATS)

KS B ISO 18175:2005 Non-destructive testing－Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
KS P ISO 13078:2019 Dentistry — Dental furnace — Test method for temperature measurement with separate thermocouple
KS C IEC PAS 62240-2008(2018) Use of semiconductor devices outside manufacturers specified temperature range
KS C 6111-2-2005 Superconductivity－Critical temperature measurement－Critical temperature of Nb-Ti, Nb3Sn, and Bi-system composite superconductors by a magnetic method using an ac susceptometer

SCC

NS-EN 2078:1993 Aerospace series — Metallic materials — Manufacturing schedule — Inspection schedule — Inspection and test report — Description and rules for use
CEI 81-27:2013 Application guide for the use of surge limiters at the arrival of the power line of electrical systems using low voltage
VDI/VDE 2602-1983 Roughness measurement with electrical stylus devices
DANSK DS/EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple
DIN 19405 E:2016 Draft Document - Dentistry - High temperature sintering furnace - Test method for temperature measurement with separate thermocouple
SAE EIA4900-2016 Use of Semiconductor Devices Outside Manufacturers' Specified Temperature Ranges
NS-EN ISO 13078:2013 Dentistry — Dental furnace — Test method for temperature measurement with separate thermocouple (ISO 13078:2013)

American National Standards Institute （ANSI)

ANSI/ISA 62382-2012 Control Systems in the Process Industry - Electrical and Instrumentation Loop Check

BR-ABNT

ABNT MB-1093-1979 Railway axis. Use a comparator to detect ovaliza?ao and belt tube slope

European Committee for Standardization (CEN)

EN 1370:1996 Founding - Surface Roughness Inspection by Visual Tactile Comparators

International Electrotechnical Commission (IEC)

IEC 62397:2007 Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors
IEC 62397:2022 Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors
IEC PAS 62240:2001 Use of semiconductor devices outside manufacturer's specified temperature ranges

API - American Petroleum Institute

API IRE C15-1974 Guide for Inspection of Refinery Equipment - Chapter XV-Instruments and Control Equipment (Second Edition)
API IRE C15-1962 Guide for Inspection of Refinery Equipment - Chapter XV-Instruments and Control Equipment (First Edition)
API IRE C15-1981 Guide for Inspection of Refinery Equipment - Chapter XV-Instruments and Control Equipment (Third Edition)

Society of Automotive Engineers (SAE)

SAE AMS2658C-2009 Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts

European Committee for Electrotechnical Standardization（CENELEC）

HD 530.2 S1-1989 Controllers with Analogue Signals for Use in Industrial - Process Control Systems Part 2: Guidance for Inspection and Routine Testing
EN 60671:2011 Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing

GB-REG

REG NASA-LLIS-0542-1996 Lessons Learned ?Use of RGA Quadrupole Mass Spectrometer for Leak Detection

KR-KS

KS P ISO 13078-2019 Dentistry — Dental furnace — Test method for temperature measurement with separate thermocouple

GSO

GSO IEC/TS 62763:2017 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire
OS GSO IEC/TS 62763:2017 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire

VDI - Verein Deutscher Ingenieure

VDI/VDE 2602-1978 Roughness measurement with electric contact (stylus) profile meters

IT-UNI

UNI 7621-1976 Paper raw material testing. Use Schopper. Riegler instrument for water filterability determination
UNI 5306-1963 Glass products for technology and hygiene. Anti-bulge strength test of wire glass at temperature ≥100℃
UNI 6327-1968 Microscopic examination of metallic materials. Use of varnish and film replica.

Danish Standards Foundation

DS/EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple

United States Navy

NAVY QPL-23167-2013 Meter, Frequency, Expanded Scale Switchboard Type (Naval Switchboard Use)
NAVY QPL-23167-QPD-2010 Meter, Frequency, Expanded Scale Switchboard Type (Naval Switchboard Use)
NAVY MIL-T-24387 A-1973 TEMPERATURE MEASUREMENT EQUIPMENT SIGNAL CONDITIONER AND POWER SUPPLY (ELECTRICAL) (NAVAL SHIPBOARD USE)

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 336-2010 Installation, inspection, and testing for class 1E power, instrumentation, and control equipment at nuclear facilities

Others: