The difference between AC withstand voltage test and DC withstand voltage test

The difference between AC withstand voltage test and DC withstand voltage test, Total:39 items.

The international standard classification for "The difference between AC withstand voltage test and DC withstand voltage test" includes: Electrical insulation in general , Fuses and other overcurrent protection devices , Electrical accessories in general .

Professional Standard - Electricity

DL/T 1669-2016 Guidelines for the implementation of on-site DC voltage withstand test for ±800kV DC equipment
DL/T 2557-2022 Guide for on-site test of applied AC voltage withstand with partial discharge measurement on valve windings of converter transformer
DL/T 377-2010 The acceptance tests of high voltage direct current equipment
DL/T 1015-2006 Guide for application of voltage measuring system in DC&AC high voltage tests on site
DL/T 474.4-2018 Guide for insulation test on site AC voltage withstanding test
DL/T 1399.4-2020 Electric power testing and measuring vehicles-Part 4:Testing vehicle for AC withstand voltage on switchgear
DL/T 274-2012 Hand-over test of ±800kV HVDC electric equipments
DL/T 1301-2013 Guideline of DC Withstand Test for Submarine Oil-filled Power Cable
DL/T 1015-2019 Guide for application of voltage measuring system in DC&AC high voltage tests on site
DL 474.4-1992 Guidelines for Implementation of On-Site Insulation Tests AC Withstand Voltage Test
DL/T 474.4-2006 Guide for insulation test on site AC voltage withstanding test
DL/T 1799-2018 The method of ability to withstand DC bias test for power transformers
DL/T 1323-2014 Guidance for Measurement of Voltage in On-site Wide Frequency AC Voltage Withstand Test

DL/T 1301-2012 Guidelines for DC voltage withstand test of submarine oil-filled cables
DL/T 2587-2023 Handover test for VSC-HVDC transmission equipment

SJ 449-1973 Methods of measurement for voltage with standing test for high-voltage rectifier tubes

JB 6204-1992 Specifications for stator insulation withstand voltage test of large high-voltage AC motors

T/CSEE 0213-2021 Test methods for low-voltage three-level AC/DC, DC/DC bidirectional converters
T/CEC 374-2020 Test procedures for flexible DC negative pressure coupled high-voltage DC circuit breakers
T/CSEE 0231-2021 Guidelines for on-site AC withstand voltage test of XLPE insulated power cables

Q/GDW 111-2004 Handover test procedures for high-voltage DC electrical equipment in DC converter stations

CSA C381.1-08-2008 Test method for calculating the energy efficiency of single-voltage external ac-dc and ac-ac power supplies First Edition

EN IEC 61462:2023 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V - Definitions, test methods, acceptance criteria and design recomme...

CEI EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and highcurrent tests Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
BS PD IEC TS 60871-2:2014+A1:2022 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V-Endurance testing

DANSK DS/EN IEC 62896:2024 Hybrid insulators for AC and DC for high-voltage applications greater than 1 000 V AC and 1 500 V DC – Definitions, test methods and acceptance criteria

IEC TS 62896:2015 Hybrid insulators for a.c. and d.c. for high-voltage applications - Definitions, test methods and acceptance criteria
IEC 61083-3:2020 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents

DS/EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests – Part 3: Requirements for hardware for tests with alternating and direct voltages and currents

VDE 0432-12-2018 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents (IEC 42/351/CDV:2017); German version prEN 61083-3:2017

BS EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests. Requirements for hardware for tests with alternating and direct voltages and currents
BS IEC 62896:2024 Hybrid insulators for AC and DC for high-voltage applications greater than 1 000 V AC and 1 500 V DC. Definitions, test methods and acceptance criteria
BS PD IEC/TS 62896:2015 Hybrid insulators for a.c. and d.c. high-voltage applications. Definitions, test methods and acceptance criteria

NF C26-227:1992 METHODS OF TEST FOR ELECTRIC STRENGTH OF SOLID INSULATING MATERIALS. PART 2 : ADDITIONAL REQUIREMENTS FOR TESTS USING DIRECT VOLTAGE.

DIN 51805:1974 Testing of lubricants; determination of flow pressure of lubricating greases, Kesternich method

Others: