Wire voltage requirements

Wire voltage requirements, Total:142 items.

The international standard classification for "Wire voltage requirements" includes: Safety of machinery , Aerospace electric equipment and systems .

The Chinese standard classification for "Wire voltage requirements" includes: Hygiene, safety and labor protection , Electrical system and equipment , Lubricating grease , Electric transmission line and equipment .

Group Standards of the People's Republic of China

T/SZAS 24-2020 Assessment requirements for forerunner standard-low-voltage wire and cable (rated voltages up to and including 450/750 V)
T/IGIA 003-2020 General quality requirements for electric scooter
T/XYMES 002-2019 Technical specifications of high duty cables for electric vehicles
T/CASMES 363-2024 Technical requirements of slider for linear guide rail
T/CCMA 0182-2024 Construction elevator busbar
T/FCEAS 007-2021 Sliding contact line electricity transmission technology standard for building hoist

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 23820-2009 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements
GB 23820-2009 Safety of machinery—Lubricants with incidental product contact—Hygiene requirements
GB/T 30215-2013 General Requirements for Electromagnetic Relays and Contactors of Aircraft

Professional Standard - Petrochemical Industry

SH/T 0596-1994 Determination method for contact resistance of lubricant grease

Fujian Provincial Standard of the People's Republic of China

DB35/T 1887-2020 General technical requirements for trolley wires for construction elevators
DB35/T 1487-2015 General technical requirements for low-voltage lifting devices at the end of low-voltage lines in power distribution networks

Taiwan Provincial Standard of the People's Republic of China

CNS 8478-1982 Method of Test for Electrical Contact Noise in Sliding Electrical Contacts

未注明发布机构

CSA C828-2019 Performance requirements for line voltage thermostats for electric room heating

Professional Standard - Traffic

JT/T 806.3-2011 Electric Rubber Tyred Container Gantry Crane - Part 3: Type of Overhead Trolley and Contact Wire
JT/T 806.2-2011 Electric Rubber Tyred Container Gantry Crane - Part 2: Type of Conductor Systems

Professional Standard - Aviation

HB 6675-1992 General requirements for crimping of copper terminals and splices and wires

Professional Standard - Electricity

DL/T 395-2010 Technical requirements for broadband access system of low voltage power line communication
DL/T 685-1999 Basic requirements inspection specification and determination methods of conductor stringing sheave

SCC

BS 23:1956 Trolley and contact wire for electric traction
BS 23:1949 Trolley and contact wire for electric traction
BS 23:1970 Specification for copper and copper-cadmium trolley and contact wire for electric traction
HOLDEN HN 1346-2001 Grease Electrical Contact
DANSK DS/EN ISO 21469:2006 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements
CEI EN 50109-2-3:1997 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors
DANSK DS/EN 2349-307:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop
NS-EN 2349-307:2006 Aerospace series — Requirements and test procedures for relays and contactors — Part 307: Contact voltage drop
BS PD 2754-2:1993 Classification of electrical and electronic equipment with regard to protection against electric shock-Guide to requirements for protection against electric shock
CSA C273.4-M1978-1978(R2003) Performance Requirements for Electric Heating Line-Voltage Wall Thermostats
AENOR UNE-EN ISO 21469:2006 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements (ISO 21469:2006)
CEI EN 61394:2012 Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors
CEI EN 61394/EC:2012 Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors
IEC TS 60536-2:1992 Classification of electrical and electronic equipment with regard to protection against electric shock - Part 2: Guidelines to requirements for protection against electric shock
MIL MIL-PRF-29608B-2014 Cleaning and Cleaning-Lubricating Compounds, Electrical Contact
MIL MIL-PRF-29608C-2016 Cleaning and Cleaning-Lubricating Compounds, Electrical Contact
NS-EN ISO 21469:2006 Safety of machinery — Lubricants with incidental product contact — Hygiene requirements (ISO 21469:2006)
DANSK DS/EN 50109-2-3:1995 Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors
BS PD IEC/TS 62996:2017 Industrial electroheating and electromagnetic processing equipment. Requirements on touch currents, voltages and electric fields from 1 kHz to 6 MHz
07/30166893 DC BS EN 61394. Overhead lines. Requirements for greases for aluminium, aluminium alloy steel bare conductors
MIL MIL-C-22520/19-1976 CRIMPING TOOL, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 16 SHIELDED CONTACTS (OUTER CONTACT)
MIL MIL-C-22520/21-1976 CRIMP TOOL, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 12 SHIELDED CONTACTS (OUTER CONTACT)
DANSK DS/EN 2349-301:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 301: Pick-up and drop-out voltage
DIN EN 61394:2012 Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors (IEC 61394:2011); German version EN 61394:2011

Korean Agency for Technology and Standards (KATS)

KS R 9163-2014 Hard-drawn copper round trolley wires
KS C IEC 61394:2021 Overhead lines — Requirements for greases for aluminium, aluminium alloy and steel bare conductors

IN-BIS

IS 3476-1967 Specification for pulleys and contact wires for electric traction
IS 8622-1977 Specification for Wire Wound Sliding Contacts - Voltages for Educational Institutions

GSO

OS GSO ASTM B9:2010 Standard Specification for Bronze Trolley Wire
OS GSO ISO 21469:2009 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements
BH GSO IEC 61394:2015 Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors
OS GSO IEC 61394:2014 Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors

American Society for Testing and Materials (ASTM)

ASTM B615-79(2006) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
ASTM B615-79(2017) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
ASTM B615-79(2011) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
ASTM B615-79(2022) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
ASTM B615-79(2000) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts

YU-JUS

JUS N.K5.054-1982 Low voltage control switches. Special requirements for contactor relays

RU-GOST R

GOST 24753-1981 Contact terminal of electrical equipment. General technical requirements
GOST 28855-1990 Cathode-ray tubes for reception. Supply and driving voltages standards
GOST 6962-1975 Electrified transport with overhead system power supply. Voltage row
GOST 32679-2014 Contact line for railway. Technical requirements and control methods
GOST R 53826-2010 Vehicles. High-voltage wires. Technical requirements and test methods
GOST 30541-1997 Lubrication systems. Lubrication deliverers. General technical requirements and test methods

American National Standards Institute （ANSI)

ANSI/ASTM B615:1979 Practice for Measuring Trical Contact Noise in Sliding Electrical Contacts

RO-ASRO

STAS 4479-1982 LOW- VOLTA GE CONTACTOK S AND CONTACT BREAKKRS Special technical requircments for quality
STAS 1902-1976 CRUSHED STEATITE General technical requirements for quality

Defense Logistics Agency

DLA QPL-27208-45-2005 RESISTOR, VARIABLE, WIRE WOUND, NONPRECISION, GENERAL SPECIFICATION FOR
DLA DSCC-DWG-86103 REV E-2010 CONTACT, RECEPTACLE, ELECTRICAL, CRIMP TO WIRE (FOR .025 INCH POST)
DLA DSCC-DWG-86103 REV F-2011 CONTACT, RECEPTACLE, ELECTRICAL, CRIMP TO WIRE (FOR .025 INCH POST)

Danish Standards Foundation

DS/EN ISO 21469:2006 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements
DS/EN 2349-307:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop
DS/EN 50109-2-3:1995 Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors

British Standards Institution (BSI)

BS EN ISO 21469:2006 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements
BS EN 50109-2-3:1996 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Contacts of electrical connectors
BS EN 2349-318:2007 Aerospace series - Requirements and test procedures for relays and contactors - Pick-up voltage at high temperature and drop-out voltage at low temperature
BS EN 2349-318:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature
BS EN 2349-307:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop
BS EN 2349-307:2007 Aerospace series - Requirements and test procedures for relays and contactors - Contact voltage drop
BS EN 61394:2011(2012) Overhead lines — Requirements for greases for aluminium, aluminium alloy and steel bare conductors
PD IEC/TS 62996:2017 Industrial electroheating and electromagnetic processing equipment. Requirements on touch currents, voltages and electric fields from 1 kHz to 6 MHz
BS EN 2349-301:2007 Aerospace series - Requirements and test procedures for relays and contactors - Pick up and drop out voltage
BS EN 2349-301:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 301: Pick-up and drop-out voltage
PD 2754-2:1993 Classification of electrical and electronic equipment with regard to protection against electric shock. Guide to requirements for protection against electric shock
BS EN 50109-2-3:1996(2000) Hand crimping tools — Tools for the crimp termination ofelectric cables and wires forlow frequency and radio frequency applications — Part 2 : Particular requirements — Section 2.3 Contacts ofelectrical connectors

PH-BPS

PNS ISO 21649:2021 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements

PL-PKN

PN E06152-1973 Low voltage contactors Re?uirements and testing procedures
PN E06104-1988 Hi?h-voltage alternatint! turrcnt contactors Rcquirements and tcsling proccdures

European Association of Aerospace Industries

AECMA PREN 2349-301-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 301: Pick-Up and Drop-Out Voltage Edition P 1
AECMA PREN 2349-307-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 307: Contact Voltage Drop Edition P 1

CZ-CSN

CSN 70 1302-1964 Cast fiat glass rolled without wire insert

German Institute for Standardization

DIN EN ISO 21469:2006-05 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements (ISO 21469:2006); German version EN ISO 21469:2006
DIN EN ISO 21469:2006 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements (ISO 21469:2006); English version of DIN EN ISO 21469:2006-05
DIN 43120:1952-09 Electric railway vehicles; bow slipper holder for contact wire clamps
DIN 43120:1952 Electric railway vehicles; bow slipper holder for contact wire clamps
DIN EN 2349-307:2007-05 Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop; German and English version EN 2349-307:2006
DIN EN 2349-307:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop; German and English version EN 2349-307:2006
DIN EN 50317:2012 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line; German version EN 50317:2012
DIN EN 50317:2003 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line; German version EN 50317:2002
DIN EN 50109-2-3:1995-11 Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors; German version EN 50109-2-3:1995

Association Francaise de Normalisation

NF E09-005*NF EN ISO 21469:2006 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements
NF L58-100-307*NF EN 2349-307:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 307 : contact voltage drop.
NF EN 2349-307:2007 Aerospace series - Requirements and test methods for relays and contactors - Part 307: contact voltage drop
NF ISO 9523:2019 Adult ski touring boots - Contact zone with touring ski bindings - Requirements and test methods
NF EN 2349-309:2007 Aerospace series - Requirements and test methods for relays and contactors - Part 309: coil-generated overvoltage
NF EN ISO 21469:2006 Sécurité des machines - Lubrifiants en contact occasionnel avec des produits - Exigences relatives à l'hygiène
NF C93-563-2-3*NF EN 50109-2-3:2004 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3 : particular requirements for contacts of electrical connectors
NF ISO 23223:2021 Ski boots for alpine skis with improved tread soles - Contact area with alpine ski bindings - Requirements and test methods
NF F21-317*NF EN 50317:2013 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
NF L58-100-301*NF EN 2349-301:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 301 : pick-up and drop-out voltage.

HU-MSZT

MSZ 151/8-T-1983 Laying requirements for strong current open-air pipelines and weak-voltage open-air pipelines

CEN - European Committee for Standardization

EN ISO 21469:2006 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements

International Organization for Standardization (ISO)

ISO 21469:2006 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements

European Committee for Standardization (CEN)

EN 2349-307:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop

GOSTR

GOST R 50571.3-2009 Low-voltage electrical installations. Part 4-41. Requirements for safety ensuring. Protection against electric shock

SAE - SAE International

SAE AS5261-2008 Contact@ Wire Barrel@ Crimp Type

ESDU - Engineering Sciences Data Unit

ESDU 85027 A-1995 Film thicknesses in lubricated Hertzian contacts (EHL). Part 1: two-dimensional contacts (line contacts).
ESDU 85027 B-2010 Film thicknesses in lubricated Hertzian contacts (EHL). Part 1: two-dimensional contacts (line contacts)

Lithuanian Standards Office

LST EN 2349-307-2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop
LST EN ISO 21469:2006 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements (ISO 21469:2006)
LST EN 50109-2-3-2001 Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Part 2-3: Particular requirements for contacts of electrical connectors

Society of Automotive Engineers (SAE)

SAE AS5261A-2019 Contact, Wire Barrel, Crimp Type
SAE AS22520/45A-2021 CRIMPING TOOLS, TYPE I, HAND, WIRE, TERMINATION FOR WIRE BARREL SIZE 10 POWER CONTACTS

ES-UNE

UNE-EN 2349-307:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop (Endorsed by AENOR in March of 2007.)
UNE-EN 2349-301:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 301: Pick-up and drop-out voltage (Endorsed by AENOR in March of 2007.)

AENOR

UNE-EN ISO 21469:2006 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements (ISO 21469:2006)

European Committee for Electrotechnical Standardization（CENELEC）

EN 50109-2-3:1995 Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio Frequency Applications Part 2-3: Particular Requirements for Contacts of Electrical Connectors
EN 61394:2011 Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors

ES-AENOR

UNE 36-742-1989 General purpose steel cables. lubricating oil. basic requirements

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 2349-307-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 307: Contact Voltage Drop (Edition P 1)

United States Navy

NAVY MIL-PRF-29608 A VALID NOTICE 1-2013 Cleaning and Cleaning-Lubricating Compounds, Electrical Contact

GOST

GOST R 70437-2022 Low voltage systems. Cable systems. Patch cords. General requirements
GOST R 70438-2022 Low voltage systems. Cable systems. Distribution panels (patch panels). General requirements

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2349-307-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 307: Contact Voltage Drop (Edition P 1)

International Electrotechnical Commission (IEC)

IEC TS 62996:2017 Industrial electroheating and electromagnetic processing equipment - Requirements on touch currents, voltages and electric fields from 1 kHz to 6 MHz
IEC 61394:2011 Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors

IEC - International Electrotechnical Commission

IEC 60536-2:1992 Classification of Electrical and Electronic Equipment with Regard to Protection Against Electric Shock Part 2: Guidelines to Requirements for Protection Against Electric Shock (Edition 1.0)
TS 62996-2017 Industrial electroheating and electromagnetic processing equipment – Requirements on touch currents@ voltages and electric fields from 1 kHz to 6 MHz (Edition 1.0)

Japanese Industrial Standards Committee (JISC)

JIS C 8352:1983 General requirements for fuses for the protection of low-voltage cables and lines
JIS C 8352:2015 General requirements for fuses for the protection of low voltage cables and lines

BR-ABNT

ABNT NBR 8117-2011 Aluminum and its alloys - Wire, rods, profiles and extruded tubes - Requirements

KR-KS

KS C IEC 61394-2021 Overhead lines — Requirements for greases for aluminium, aluminium alloy and steel bare conductors

GM Europe

GME STD 518371-1988 Grease 8371 Universal grease with EP additive Rolling-contact bearing grease Sm鰎jfett 8371 Universalfett med EP-tillsats Rullningslagerfett

Others: