Conductivity parallel sample allowable difference

Conductivity parallel sample allowable difference, Total:34 items.

The Chinese standard classification for "Conductivity parallel sample allowable difference" includes: , Basic standards and general methods , Steel and iron alloy analysis method .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15543-1995 Quality of electric energy supply－Admissible three-phase voltage unbalance factor
GB 18613-2020(英文版) Minimum allowable values of energy efficiency and values of efficiency grades for motors
GB/T 15945-1995 Quality of electric energy supply Permissible deviation of frequency for power system
GB 12325-1990 Quality of electric energy supply--Admissible deviation of supply voltage
GB/T 12325-2003 Power quality--Admissible deviation of supply voltage
GB/T 222-1984 Method of sampling steel for determination of chemical composition and permissible variations for product analysis

GSO ISO 738:2013 Coniferous sawn timber -- Sizes -- Permissible deviations and shrinkage

ISO 738:1981 Coniferous sawn timber; Sizes; Permissible deviations and shrinkage
ISO 738:2015 Coniferous sawn timber - Sizes - Permissible deviations and shrinkage

NF B53-666*NF EN 12249:1999 Sawn timber used in pallets. Permitted deviations and guidelines for dimensions.

DIN 40680-1:1983-08 Ceramic components for electrical purposes; admissible tolerances
DIN 264-2:1973-05 Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges

GOST 9664-1974 Resistors. Tolerances on rated resistance
GOST 12.1.006-1984 Occupational safety standards system. Electromagnetic fields of radio frequencies. Permissible levels at work-places and requirements for control
GOST 12.1.002-1984 Occupational safety standards system. Power frequency electric fields. Premissible levels of field strength and requirements for control at work-places

BS 5964:1980 Methods for setting out and measurement of buildings: permissible measuring deviations

STAS 930-1975 ELECTRIC SYSTEMS Rated voltages and permissible deviations
STAS 8681-1978 ELECTRICAL ROTATING MACHINES PERMISSIBLE LEVELS OF VIBRATIONS
STAS 7944-1979 Current conducting bars ERMANENT PERMISSIBLE MAXIMAL CURRENTS Prescriptions
STAS 7444-1979 SEEDS FOR SOWING Test reports and permissible differences between tests

ITU-T G.224-1993 MAXIMUM PERMISSIBLE VALUE FOR THE ABSOLUTE POWER LEVEL (POWER REFERRED TO ONE MILLIWATT) OF A SIGNALLING PULSE
ITU-T Q.20-1989 Maximum Permissible Value for the Absolute Power Level of a Signalling Pulse - General Recommendations on Telephone Switching and Signalling - Functions and Information Flows for Services in the ISDN - Supplements (Study Group XI) 2 pp
ITU-T G.224-1988 Maximum permissible value for the absolute power level (power referred to one milliwatt) of a signalling pulse
ITU-T G.224 FRENCH-1993 MAXIMUM PERMISSIBLE VALUE FOR THE ABSOLUTE POWER LEVEL (POWER REFERRED TO ONE MILLIWATT) OF A SIGNALLING PULSE
ITU-T G.224 SPANISH-1993 MAXIMUM PERMISSIBLE VALUE FOR THE ABSOLUTE POWER LEVEL (POWER REFERRED TO ONE MILLIWATT) OF A SIGNALLING PULSE

SFS 3503-1976 Open steel die forgings. Die forging styles. Tolerances and allowed deviations

DLA SMD-5962-91605-1992 MICROCIRCUITS, DIGITAL, ADVANCED CMOS, PARALLEL D REGISTER WITH ENABLE, MONOLITHIC SILICON

ASTM E1994-98(2003) Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans
ASTM E1994-09 Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans
ASTM E1994-09(2013) Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans
ASTM E1994-98 Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans
ASTM E1994-08 Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans

AS 4820:2006 Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing

Others: