Method Verification Residual Sum of Squares Requirement

Method Verification Residual Sum of Squares Requirement, Total:244 items.

The international standard classification for "Method Verification Residual Sum of Squares Requirement" includes: aircraft tyres , Quality management and quality assurance , General purpose containers , Road vehicle systems , Limits and fits , Glass products .

The Chinese standard classification for "Method Verification Residual Sum of Squares Requirement" includes: Extracorporeal circulation, artificial organ and prosthesis device , Tyre , Standardization and Quality Management , Container, tray and pallet , Printing Technology , Bearing system , Basic standards and general methods , Daily use glass products .

未注明发布机构

DIN 1100:1989 Hard aggregates for cement-bound floor screeds - Requirements and test methods
DIN 1100 E:2003-03 Hard aggregates for cement-bound floor screeds - Requirements and test methods
DIN EN 1970:2005 Adjustable beds for disabled people – requirements and test methods; German version EN 1970:2000 + A1:2005
DIN EN 12182:1999 Assistive products for persons with disability - General requirements and test methods
DIN 1100 E:2020-05 Hard aggregates for cement-bound floor screeds - Requirements and test methods

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13655-1992 Static unbalance test method for aircraft tyre
GB/T 25849-2024 Mobile elevating work platforms—Design, calculations, safety requirements and test methods
GB/T 20404-2006 Hoists for the transfer of disabled persons―Requirements and test methods
GB/T 16564-1996 Series 1: Platform and platform-based containers-Specification and testing
GB/T 32465-2015 Requirements for verification & validation of detection methods and internal quality control on chemical analysis
GB/T 13655-2004 Test method of static unbalance for aircraft tyres

Professional Standard - Press and Publication

CY/T 5-1991 Quality requirements and test methods for planographic matter
CY/T 7.2-1991 Quality requirements and test methods for post-press finishing Quality requirements and test methods for paper-cover bookblocks
CY/T 5-1999 Quality requirements and inspection method of lithoprint
CY/T 28-1999 Quality requirements and inspection method of binding - paperbacked

Military Standard of the People's Republic of China-General Armament Department

GJB 648-1988 Aerospace tire static balance difference test method

Jilin Provincial Standard of the People's Republic of China

DB22/T 2516-2016 Validation specification for a new method for the detection of drug residues in aquatic products

Shanxi Provincial Standard of the People's Republic of China

DB1404/T 17-2021 Inspection and testing laboratory instrument analytical method validation requirements chromatography
DB1404/T 18-2021 Inspection and testing laboratory instrument analysis method validation requirements Spectroscopy

Professional Standard-Ships

CB/T 3806-1997 Requirement and measuring method of illumination levels for offshore platform

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 1327.16-2023 Qualification Certification of Inspection and Testing Institutions Part 16: Standard Method Verification and Non-standard Method Validation Requirements

Professional Standard - Automobile

QC/T 243-2004 Performance requirements and test methods of automobile wheels disc base planeness

Professional Standard - Aviation

HB 7779-2005 Geometrical tolerancing General requirements for methods of measurement

国家市场监督管理总局

RB/T 063-2021 Verification and validation requirements for management and technical capability evaluation methods of inspection and testing institutions

Professional Standard - Commodity Inspection

SN/T 3526-2013 Chemicals - Validation basic requirements of alternative methods for in vitro toxicological testing

Group Standards of the People's Republic of China

T/SCIPA 002-2023 General technical requirements and test methods for e-student card
T/HCAA 002-2021 Guidance for verification and validation of quantitative detection methods of pesticide residues in fruits and vegetables

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37854-2019 Wide-mouth glass containers—Deviation from flatness of top sealing surface—Test methods

German Institute for Standardization

DIN EN ISO 10535:2007 Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006); English version of DIN EN ISO 10535:2007-04
DIN 7906:1999 Gymnastic equipment - Balancing beams - Requirements and test methods; including DIN EN 12432
DIN EN ISO 20072:2013-10 Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009); German version EN ISO 20072:2013
DIN EN 12432:1998 Gymnastic equipment - Balancing beams - Functional and safety requirements; test methods; German version EN 12432:1998
DIN CEN ISO/TS 23758:2022-02 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products (ISO/TS 23758:2021); German version CEN ISO/TS 23758:2021
DIN EN 13964:2007 Suspended ceilings - Requirements and test methods; German version EN 13964:2004 + A1:2006
DIN EN 61110:1993 System Omega and differential Omega receivers for ships; operational and performance requirements; methods of testing and required test results (IEC 61110:1992); German version EN 61110:1992
DIN 79005:2017 Athletics - Horizontal jump disciplines - Requirements and test methods for long and triple jump
DIN EN 12182:2012 Assistive products for persons with disability - General requirements and test methods; German version EN 12182:2012
DIN 1100:2004 Hard aggregates for cement-bound floor screeds - Requirements and test methods
DIN EN 1339 Berichtigung 1:2006 Concrete paving flags - Requirements and test methods; German version EN 1339:2003, Corrigenda to DIN EN 1339:2003-08; German version EN 1339:2003/AC:2006

SCC

NS-EN 1970:2000 Adjustable beds for disabled persons — Requirements and test methods
UNE-EN 1970:2001 ADJUSTABLE BEDS FOR DISABLED PERSONS. REQUIREMENTS AND TEST METHODS.
NS-EN ISO 10535:1998 Hoists for the transfer of disabled persons — Requirements and test methods (ISO 10535:1998)
NS-EN 12182:1999 Technical aids for disabled persons — General requirements and test methods
UNE-EN 12182:2000 TECHNICAL AIDS FOR DISABLED PERSONS. GENERAL REQUIREMENTS AND TEST METHODS.
UNE-EN ISO 10535:1999 HOISTS FOR THE TRANSFER OF DISABLED PERSONS. REQUIREMENTS AND TEST METHODS (ISO 10535:1998)
DANSK DS/EN ISO 20072:2013 Aerosol drug delivery device design verification - Requirements and test methods
BS PD ISO/TS 7013:2023 Water quality. Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
DANSK DS/ISO/TS 7013:2023 Water quality – Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
DANSK DS/EN 12432:1998 Gymnastic equipment - Balancing beams - Functional and safety requirements, test methods
BS 1610-1:1958 Verification of testing machines. Methods of load verification requirements for elastic proving devices and verification of machines for tension and compression testing
NS-EN 12432:1998 Gymnastic equipment — Balancing beams — Functional and safety requirements, test methods
07/30145258 DC BS ISO 20072. Aerosol drug delivery devices design verification. Requirements and test methods
NS-EN 12182:2012 Assistive products for persons with disability — General requirements and test methods
DANSK DS/EN 12182:2012 Assistive products for persons with disability - General requirements and test methods
AWWA WQTC65788 Who Needs RED? An Empirical Method for Validating the Log-Inactivation of a UV Reactor Thereby Eliminating the Need for RED and RED Bias
AENOR UNE-EN ISO 20072:2013 Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009)
NS-EN ISO 20072:2013 Aerosol drug delivery device design verification — Requirements and test methods (ISO 20072:2009)
DANSK DS/EN ISO 10535:2007 Hoists for the transfer of disabled persons – Requirements and test methods
NS 3258:1982 Test methods for rigid flat sheets - Determination of dimensions, angular and form deviations
DANSK DS/ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
DANSK DS/ISO 1940-1:2009 Mechanical vibration – Balance quality requirements for rotors in a constant (rigid) state – Part 1: Specification and verification of balance tolerances
CAN/CSA-Z10535-2003(R2008) Hoists for the Transfer of Disabled Persons - Requirements and Test Methods
DIN EN 12182 E:2009 Draft Document - Assistive products for persons with disability - General requirements and test methods; German version prEN 12182:2009
NS-EN ISO 20072:2010 Aerosol drug delivery device design verification — Requirements and test methods (ISO 20072:2009)
NS-EN 16842-1:2018 Powered industrial trucks — Visibility — Test methods and verification — Part 1: General requirements
NS-EN 12393-3:2008 Foods of plant origin — Multiresidue methods for the gas chromatographic determination of pesticide residues — Part 3: Determination and confirmatory tests
NS-EN ISO 10535:2006 Hoists for the transfer of disabled persons — Requirements and test methods (ISO 10535:2006)
09/30201992 DC BS EN 12182. Assistive products for persons with disability. General requirements and test methods
UNE-EN 12393-3:2009 Foods of plant origin - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 3: Determination and confirmatory tests
BS DD 188:1990 Methods of test and performance requirements for general-purpose flat pallets for through transit of goods
NS-EN 12393-3:1998 Non-fatty foods — Multiresidue methods for the gas chromatographic determination of pesticides residues — Part 3: Determination and confirmatory tests

Association Francaise de Normalisation

NF S96-305:2007 Hoists for the transfer of disabled persons - Requirements and test methods.
NF S96-308/A1:2005 Adjustable beds for disabled persons - Requirements and test methods.
NF S96-305:1999 Hoists for the transfer of disabled persons. Requirements and test methods.
NF S96-301*NF EN 12182:2012 Assistive products for persons with disability - General requirements and test methods.
NF S93-100*NF EN ISO 20072:2013 Aerosol drug delivery device design verification - Requirements and test methods
NF S52-306*NF EN 12432:1998 Gymnastic equipment. Balancing beams. Functional and safety requirements, test methods.
NF P68-204/A1:2007 Suspended ceilings - Requirements and test methods.
NF P68-204:2004 Suspending ceilings - Requirements and test methods.
NF P68-204*NF EN 13964:2014 Suspended ceilings - Requirements and test methods
XP CEN ISO/TS 23758:2021 Guidelines for the validation of qualitative methods for screening for veterinary drug residues in milk and dairy products
NF S86-400:1994 Horlogery. Watch-glasses. Dimensions and tolerances of watch-glasses and test methods for their verification.
NF ISO 1132-2:2002 Bearings - Tolerances - Part 2: principles and methods of measurement and verification by gauge
NF S96-304*NF ISO 19894:2019 Walking trolleys - Requirements and test methods

GSO

GSO ISO 10535:2015 Hoists for the transfer of disabled persons -- Requirements and test methods
OS GSO 95:1987 Method of Verification of Percision Balances
GSO 95:1987 Method of Verification of Percision Balances
GSO ISO 10226:2015 Aluminium ores -- Experimental methods for checking the bias of sampling
GSO ISO 20072:2013 Aerosol drug delivery device design verification - Requirements and test methods
OS GSO ISO 10535:2015 Hoists for the transfer of disabled persons -- Requirements and test methods
BH GSO ISO 1940-1:2017 Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
GSO ISO 1940-1:2015 Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
GSO ISO 16368:2016 Mobile elevating work platforms -- Design, calculations, safety requirements and test methods

Standard Association of Australia （SAA）

AS/NZS ISO 10535:2011 Requirements and test methods for lifts for transfer of persons with disabilities
AS EN 12182:2015 Assistive products for persons with disability — General requirements and test methods

Danish Standards Foundation

DS/EN ISO 10535:2007 Hoists for the transfer of disabled persons - Requirements and test methods
DS/EN 12182:2013 Assistive products for persons with disability - General requirements and test methods
DS/EN ISO 20072:2013 Aerosol drug delivery device design verification - Requirements and test methods
DS 1103.7:1982 Test methods for rigid flat sheets — Determination of dimensions, angular and form deviations
DS/ISO 1940-1/Corr. 1:2009 Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances
DS/ISO 1940-1:2009 Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances
DS 1103-7:1988 Test methods for rigid flat sheets - Determination of dimensions, angular and form deviation
DS/ISO 16140-3:2021 Microbiology of the food chain â€” Method validation â€” Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
DS 2340:1988 Heat energy meters. Requirements and test methods

British Standards Institution (BSI)

BS EN 1970:2000 Adjustable beds for disabled persons - Requirements and test methods
BS EN ISO 10535:2007 Hoists for the transfer of disabled persons - Requirements and test methods
BS EN 12182:2012 Assistive products for persons with disability. General requirements and test methods
BS EN 12182:1999 Technical aids for disabled persons - General requirements and test methods
BS EN ISO 20072:2010 Aerosol drug delivery device design verification. Requirements and test methods
BS EN ISO 20072:2013 Aerosol drug delivery device design verification. Requirements and test methods
BS ISO 19202-1:2017 Summer toboggan runs. Safety requirements and test methods
BS 6861-1:1987 Mechanical vibration - Balance quality requirements of rigid rotors - Method for determination of permissible residual unbalance
BS EN 12432:1998 Gymnastic equipment - Balancing beams - Functional and safety requirements, test methods
BS EN 16842-1:2018 Powered industrial trucks. Visibility. Test methods and verification - General requirements
BS EN 1341:2012 Slabs of natural stone for external paving. Requirements and test methods
BS EN 13964:2004+A1:2006 Suspended ceilings - Requirements and test methods
BS ISO 1940-1:2003 Mechanical vibration — Balance quality requirements for rotors in a constant (rigid) state — Part 1 : Specification and verification of balance tolerances
BS CWA 16697:2013 Car-Adaptations for Disabled Drivers. Requirements, test methods and best practise guidelines
BS EN 13126-13:2012 Building hardware. Hardware for windows and balcony doors. Requirements and test methods. Sash balances
BS EN 13964:2004 Suspended ceilings - Requirements and test methods
DD 7995-2003 Specification for temporary access platforms - Performance and design requirements,and test methods
BS DD 7995:2003 Specification for temporary access platforms - Performance and design requirements, and test methods
BS ISO 16730-1:2015 Fire safety engineering. Procedures and requirements for verification and validation of calculation methods. General
BS EN 13964:2014 Suspended ceilings. Requirements and test methods
BS 667:2005 Illuminance meters - Requirements and test methods
BS 5777:1979 Methods of test for verification of stability of pallet stackers and high lift platform trucks
BS 7920:2005 Luminance meters - Requirements and test methods
BS PD CEN ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
BS EN ISO 16140-3:2021 Microbiology of the food chain. Method validation. Protocol for the verification of reference methods and validated alternative methods in a single laboratory
BS ISO 12828-2:2016 Validation methods for fire gas analyses. Intralaboratory validation of quantification methods
BS EN 13126-10:2008 Building hardware - Requirements and test methods for windows and doors height windows - Arm-balancing systems

European Committee for Standardization (CEN)

EN ISO 10535:2006 Hoists for the transfer of disabled persons - Requirements and test methods
EN ISO 10535:1998 Hoists for the Transfer of Disabled Persons - Requirements and Test Methods ISO 10535:1998
EN ISO 10535:2021 Assistive products - Hoists for the transfer of persons - Requirements and test methods (ISO 10535:2021)
EN 12182:2012 Assistive products for persons with disability - General requirements and test methods
EN 12182:1999 Technical Aids for Disabled Persons - General Requirements and Test Methods
EN 12432:1998 Gymnastic equipment - Balancing beams - Functional and safety requirements, test methods
prEN 224-1986 Methods of testing doors; measurement of deviations from local flatness in door leaves
EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)

International Organization for Standardization (ISO)

ISO 10535:1998 Hoists for the transfer of disabled persons - Requirements and test methods
ISO 10535:2006 Hoists for the transfer of disabled persons - Requirements and test methods
ISO 20072:2009 Aerosol drug delivery device design verification - Requirements and test methods
ISO/PRF TS 7013 Water quality — Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
ISO/TS 7013:2023 Water quality — Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
ISO 19894:2019 Walking trolleys — Requirements and test methods
ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory

Korean Agency for Technology and Standards (KATS)

KS P ISO 10535:2009 Hoists for the transfer of persons with disability－ Requirements and test methods
KS B ISO 5460-2005(2010) Technical drawings - Geometrical tolerancing - Tolerancing of form, orientation, location and run-out - Verification principles and methods - Guidelines
KS P ISO 20072:2021 Aerosol drug delivery device design verification —Requirements and test methods
KS B ISO 5460-2015 Technical drawings - Geometrical tolerancing - Tolerancing of form, orientation, location and run-out - Verification principles and methods - Guidelines
KS P ISO 10535:2020 Hoists for the transfer of disabled persons —Requirements and test methods
KS B ISO 1940-1:2013 Mechanical vibration-Balance quality requirements for rotors in a constant (rigid) state-Part 1:Specification and verification of balance tolerances
KS B ISO 1940-1-2019 Mechanical vibration－Balance quality requirements for rotors in a constant (rigid) state－Part 1：Specification and verification of balance tolerances

Lithuanian Standards Office

LST EN 12182-2012 Assistive products for persons with disability - General requirements and test methods
LST EN ISO 20072:2013 Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009)
LST EN 13964-2014 Suspended ceilings - Requirements and test methods
LST EN ISO 20072:2011 Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009)

AENOR

UNE-EN 12182:2012 Assistive products for persons with disability - General requirements and test methods
UNE-EN ISO 20072:2013 Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009)

CU-NC

NC 90-06-37-1984 Metrological Assurance. BalanceBar and Sliding Block Scales Verification Methods and Means
NC 90-03-09-1987 Metrological Assurance. Geodesia Levels. Verification Methods and Means
NC 90-03-10-1987 Metrological Assurance. Level Testers. Methods and Means of Verification
NC 90-01-65-1989 Standards System for Metrological Assurance. Planoparallel Measures. Methods and Means of Verification
NC 90-00-17-1987 Metrological Assurance. Methods for Expressinq Measurement Errors and Ways for Representing the Results
NC 90-16-02-1989 Standards System for Metrological Assurance. Wow,Flutter and Drift Meters. Methods and Means of Verification
NC 90-14-18-1984 Metrological Assurance. Automatic Adjusten Balances. Verification Methods and Means
NC 90-07-10-1984 Metrological Assurance Diffentical Manometers with Pneumatic Output Signal Verification Method and Means
NC 90-14-01-1985 Metrologlcal Assurance. Working Resistcince Thermometers. Verificatlon Methods and Means
NC 90-03-01-1986 Metrological Assurance Square and Bar Levels Verification Methods and Means

CZ-CSN

CSN 25 7209-1986 Indicating and recording differential pres- ure gauges. Methods of verification
CSN 25 7513-1984 Stationary measuring tanks. Technical requirements and verification methods
CSN 01 4431-1987 Methods of mcasuremcnl of parallclism devialoris
CSN 17 7805-1982 Set of weights to 50 kg. Technical requirements. Methods of testing for verification
CSN 25 2303-1987 Surface roughness. Calibration speciemens. Methods of verification
CSN 25 7508-1980 Metalic volume measures secondary tandards. Technical requirements. erification methods and means
CSN 99 4102-1988 Nonautomatic weighing Instruments. General technical requirements and basic methods of verification

RU-GOST R

GOST R ISO 10535-2010 Hoists for the transfer of disabled persons. Requirements and test methods
GOST 24824-1988 Ironing presses. Main dimensions, technical requirements and test methods
GOST R 51632-2014 Technical aids for disabled persons. General technical requirements and test methods
GOST ISO 1940-1-2007 Vibration. Balance quality requirements for rotors in a constant (rigid) state. Part 1. Specification and verification of balance tolerances
GOST 33668-2015 Automotive Vehicles. Controls for disabled drivers with dysfunction of the hands and feet. Technical requirements and test methods
GOST R ISO 10535-1999 Household hoists for disabled persons. Technical requirements and test methods
GOST 23854-1979 Level meters of electrical signals. General technical requirements and test methods
GOST R 54021-2010 Global navigation satellite systems. Regional differential subsystems. Technical requirements and methods of testing
GOST 24566-1986 Flat plug-in connectors. Basic dimensions, technical requirements and test methods
GOST 23.225-1999 Ensuring of wear resistance of products. Principles of provision. General requirements

Canadian Standards Association (CSA)

CAN/CSA-Z10535-2003 Hoists for the Transfer of Disabled Persons - Requirements and Test Methods (First Edition)
CAN/CSA-Z10535.1-2015 Hoists for the transfer of disabled persons - Requirements and test methods (First Edition)

YU-JUS

JUS B.D8.401-1998 Ceramic sewer pipes - Test methods and reauirements - Deviation from straightness

American Society for Testing and Materials (ASTM)

ASTM D4821-14 Standard Guide for Carbon Blackmdash;Validation of Test Method Precision and Bias
ASTM D4821-05 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-15 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-01 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-06 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM D4821-07e1 Standard Guide for Carbon Black Validation of Test Method Precision and Bias
ASTM D4821-19 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-20 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-04 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-07 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM E2253-16 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM D4821-03a Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-03 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM E2253-11 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2253-08 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2253-21 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2402-11(2017) Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2402-24 Standard Test Method for Mass Loss, Residue, and Temperature Measurement Validation of Thermogravimetric Analyzers
ASTM E2402-19 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2164-24a Standard Test Method for Directional Difference Test
ASTM E410-98 Standard Test Method for Moisture and Residue in Liquid Chlorine
ASTM E410-98(2003) Standard Test Method for Moisture and Residue in Liquid Chlorine
ASTM E2164-24 Standard Test Method for Directional Difference Test

Society of Automotive Engineers (SAE)

SAE AS8617-2020 Balancing Machines - Verification Test Requirements

Japanese Industrial Standards Committee (JISC)

JIS A 5362:2016 Precast concrete products -- Required performance and methods of verification
JIS A 5362:2010 Precast concrete products -- Required performance and methods of verification
JIS A 5362:2004 Precast concrete products -- Required performance and methods of verification
JIS A 5362:2001 Precast concrete products -- Required performance and methods of verification
JIS B 7285:2016 Spectacle frames -- Requirements and test methods

GOST

GOST 34809-2021 Lightrail transport. General technical requirements. Test methods
GOST 34808-2021 Lightrailtransport. Braking system. Requirements and test methods
GOST R 59888-2021 Light rail transport. Braking system. Requirements and test methods

GOSTR

GOST R 59011-2020 Sport vehicles. Technical expertise, safety requirements and verification methods
GOST 34682.3-2020 Lifting platforms for disabled persons and other persons with impaired mobility. Safety requirements for the construction and installation. Part 3. Rules and methods of examinations (tests) and measurements by certification. Rules of sampling

VN-TCVN

TCVN 6923-2001 Road vehicles.Horns.Requirements and test methods in type approval
TCVN 6769-2001 Road vehicles.Rear view mirrors.Requirements and test methods in type approval
TCVN 6758-2000 Road vehicles.Safety glazing and glazing material.Requirements and test methods in type approval
TCVN 6955-2001 Road vehicles.Headlamps of motorcycles.Requirements and test methods in type approval

KR-KS

KS P ISO 10535-2020 Hoists for the transfer of disabled persons —Requirements and test methods
KS P ISO 20072-2021 Aerosol drug delivery device design verification —Requirements and test methods
KS B ISO 1940-1-2013 Mechanical vibration－Balance quality requirements for rotors in a constant (rigid) state－Part 1：Specification and verification of balance tolerances
KS J ISO 21899-2023 Biotechnology — Biobanking — General requirements for the validation and verification of processing methods for biological material in biobanks

National Association of Pipe Fabricators (NAPF)

PFI ES-24-2008 PIPE BENDING METHODS, TOLERANCES, PROCESS AND MATERIAL REQUIREMENTS
PFI ES-24-2013 PIPE BENDING METHODS, TOLERANCES, PROCESS AND MATERIAL REQUIREMENTS
PFI ES-24-2004 Pipe Bending Methods, Tolerances, Process and Material Requirements
PFI ES-24-1992 Pipe Bending Methods, Tolerances, Process and Material Requirements R(2001)

UNKNOWN

TCGCC 95-2024 Methods and requirements for tracing the provenance of calligraphy and painting artworks

RO-ASRO

STAS 11456-1980 Electrical rptating machines RESIDUAL UNBALANCE OF ROTORS Permissible levels and methods of test
STAS 6299/18-1979 PLATFORM-CONTAINERS Technicalrequirements and test methods

NL-NEN

NEN 2728-1993 Permanent paper. Requirements and test methods

International Electrotechnical Commission (IEC)

IEC 61110:1992 System Omega and differential Omega receivers for ships; operational and performance requirements; methods of testing and required test results

HU-MSZT

MSZ KGST 2566-1980 General industrial requirements and test methods for differential pressure measuring instruments

Indonesia Standards

SNI 0331-2011 Quality requirements and test methods

CEN - European Committee for Standardization

PREN 1459-7-2017 Rough-terrain trucks - Safety requirements and verification - Part 7: Test method and determination of noise emission

Others: Design verification of spray drug delivery devices. Test methods and requirements