Pump pressure is too high during liquid phase exhaust

Pump pressure is too high during liquid phase exhaust, Total:158 items.

The international standard classification for "Pump pressure is too high during liquid phase exhaust" includes: Fluid power systems , Pumps and motors , Refrigerating technology .

The Chinese standard classification for "Pump pressure is too high during liquid phase exhaust" includes: Hydraulic and pneumatic device , Refrigeration equipment , Hydraulic fluid , Analysis methods for exhaust emission pollutants , Petroleum geology exploration .

Professional Standard - Coal

MT 91-1984 Test specification for high pressure filter used in coal mine emulsion pumping station

Group Standards of the People's Republic of China

T/ZZB 3063-2023 Solid-liquid two-phase flow hydraulic diaphragm pump
T/CISA 163-2021 Technical specifications for high-precision filtration of converter flue gas emissions
T/ZZB 2819-2022 High pressure ammonia centrifugal pump
T/ZZB 1303-2019 Hydraulic air-assistant system master cylinder of clutch

Taiwan Provincial Standard of the People's Republic of China

CNS 5702-1980 Method of Test of Gear Pumps for Hydraulic Use - Discharge Diameter 10 - 50 mm
CNS 5703-1980 Vane Pumps for Hydraulic Use - Discharge Diameter 10 - 50 mm
CNS 5270-2-1980 Graphical Symbols for Fluid Power Diagrams-Pump and Motor
CNS 5270.2-1980 Graphical Symbols for Fluid Power Diagrams-Pump and Motor
CNS 10934-1984 Bleed Screw of Hydraulic Brake Wheel Cylinders for Automobiles
CNS 5704-1980 Method of Test of Vane Pumps for Hydraulic Use - Discharge Diameter 10 - 50 mm
CNS 5701-1980 Gear Pumps for Hydraulic Use - Discharge Diameter 10 - 50 mm

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7936-1987 Hydraulic fluid power - Positive displacement pumps andmotors - Determination of derived capacity
GB/T 2347-1980 Hydraulic fluid power; Pumps and motors; Geometric displacements
GB 2347-1980 Hydraulic pump and motor nominal displacement series
GB/T 7936-2012 Hydraulic fluid power—positive displacement pumps and motors—Determination of derived capacity
GB/T 25861-2023 Water-source high temperature heat pumps using the vapor compression cycle
GB/T 17483-1998 Test code for the determination of airborne noise level of hydraulic pumps
GB/T 25861-2010 Water-source high temperature heat pumps using the vapor compression cycle

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 6396-2008 General specification for fixed displacement hydraulic pumps of missiles

Professional Standard - Petrochemical Industry

NB/SH/T 0846-2010 Test Method for Evaluating Performance of Hydraulic Oil in High Pressure Piston Type Pump
SH/T 0787-2006 Standard test method for indicating wear characteristics of petroleum hydraulic fluids in a high pressure constant volume vane pump

Professional Standard - Aerospace

QJ 1712-1989 General technical requirements for fixed displacement hydraulic pumps for missiles

Professional Standard - Environmental Protection

HJ/T 40-1999 Stationary source emission -- Determination of benzo(a) pyrene -- High performance liquid chromatography

Professional Standard - Energy

NB/T 10847-2021 Specification for design of discharge treatment of shale gas field fracturing flow back water

Professional Standard - Petroleum

SY/T 6944-2013 Technical Regulations Combination of Perforation, Testing and Hydraulic Jet Pump
SY 6944-2013 Oil and gas well perforation test hydraulic jet pump drainage joint technical specification

Military Standard of the People's Republic of China-General Armament Department

GJB 8532-2015 Specification of large displacement and high pressure air compressor unit for gas station with naval shore-based

未注明发布机构

DIN ISO 4126-10 E:2019-03 Safety devices for protection against excessive pressure - Part 10: Sizing of safety valves for gas/liquid two-phase flow
AS 4621:2019/Amdt 1:2022 Regulators for use with liquefied petroleum - Vapour phase

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 1583-2022 Oil and gas field fracturing flowback fluid treatment technical specifications

Professional Standard - Machinery

JB/T 12307-2015 Specification of YBBZ series high-voltage flameproof three-phases asynchronous motor for pump station

ESDU - Engineering Sciences Data Unit

ESDU 77016 B-2007 The gravitational component of pressure gradient for two-phase gas or vapour/liquid flow through straight pipes.
ESDU 76018 D-2007 The frictional component of pressure gradient for two-phase gas or vapour/liquid flow through straight pipes.

Korean Agency for Technology and Standards (KATS)

KS B ISO 3662:2006 Hydraulic fluid power-Pumps and motors-Geometric displacements
KS B ISO 3662:2013 Hydraulic fluid power－Pumps and motors－Geometric displacements
KS B ISO 3662-2013 Hydraulic fluid power－Pumps and motors－Geometric displacements
KS R 4062-1987 Air master cylinder for automotive hydraulic brake system
KS I ISO 17736:2020 Workplace air quality — Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography
KS R 4062-2007(2022) Air master cylinder for automotive hydraulic brake system
KS M ISO 20763:2011 Petroleum and related products-Determination of anti-wear properties of hydraulic fluids-Vane pump method
KS M ISO 20763:2014 Petroleum and related products-Determination of anti-wear properties of hydraulic fluids-Vane pump method
KS C IEC 60512:2009 Identification by hour numbers of the phase conductors of 3-phase electric systems
KS R 4062-2007(2017) Air master cylinder for automotive hydraulic brake system

International Organization for Standardization (ISO)

ISO 3662:1976 Hydraulic fluid power; Pumps and motors; Geometric displacements
ISO 20163:2019 Vulcanized rubber — Determination of free sulfur by gas chromatography (GC) and high performance liquid chromatography (HPLC)
ISO 8426:1988 Hydraulic fluid power; positive displacement pumps and motors; determination of derived capacity
ISO 20763:2004 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
ISO/CD 8426-2:2023 Hydraulic fluid power — Determination of derived displacement of positive displacement pumps and motors — Part 2: Zero-Pressure-Intercept-Method

German Institute for Standardization

DIN 24331:1972 Oilhydraulic; hydraulic pumps and hydraulic engines, geometrical displacement-volume, rates
DIN EN ISO 20763:2004 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004); German version EN ISO 20763:2004
DIN EN 1762:2019-03 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification; German version EN 1762:2018
DIN EN 16125:2019-12 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase; German version EN 16125:2019
DIN 45635-26:1979 Measurement of airborne noise emitted by machines; enveloping surface method, hydraulic pumps
DIN EN 17503:2020 Environmental solid matrices - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC); German and English version prEN 17503:2020
DIN EN 16181:2019 Soil, treated biowaste and sludge - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
DIN ISO 4126-10:2019-10 Safety devices for protection against excessive pressure - Part 10: Sizing of safety valves for gas/liquid two-phase flow (ISO 4126-10:2010) / Note: To be replaced by DIN EN ISO 4126-10 (2021-07).

VN-TCVN

TCVN 2151-1977 Positive displacement hydraulic pumps and motors.Technical requirements
TCVN 5193-1990 Fluid power drive.Positive displacement pumps.Acceptance rules and methods testing

Association Francaise de Normalisation

NF E44-051/IN1*NF EN 12162/IN1:2009 Liquid pumps - Safety requirements - Procedure for hydrostatic testing.
NF E44-051*NF EN 12162+A1:2009 Liquid pumps - Safety requirements - Procedure for hydrostatic testing
NF E48-360:1991 Hydraulic fluid power. Fixed and variable displacement pumps. Specification with order.
NF ISO 3662:1989 Transmissions hydrauliques - Pompes et moteurs - Cylindrées géométriques
NF ISO 8426:2008 Hydraulic transmissions - Positive displacement pumps and motors - Determination of measured displacement
NF E48-354:1989 Hydraulic fluid power. Positive displacement pumps and motors.
NF E44-403*NF EN 12483:1999 Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests
NF T60-621*NF EN ISO 20763:2004 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
NF EN 1762:2018 Rubber hoses and hoses for liquefied petroleum gas LPG (in liquid or gas phase) and natural gas up to 25 bar (2.5 MPa) - Specification
NF X43-025:1988 Air quality. Ambient air. Determination of polycyclic aromatic hydrocarbons. High pressure liquid chromatography and gaz chromatography determination.
NF X43-264:2019 Air quality - Air in workplaces - Sampling and dosage of aldehydes by pumping on a support impregnated with DNPH and dosage by liquid chromatography CLPH
NF EN ISO 4256:1998 Liquefied petroleum gases - Determination of relative vapor pressure - LPG method
NF E48-670:1991 Hydraulic fluid power. Filter elements. Qualification procedure.

GOST

GOST R 70769-2023 Hydraulic drives. Positive-displacement pumps and hydraulic motors. General technical requirements

RO-ASRO

STAS SR ISO 3662:1995 Hydraulic fluid power - Pumps and motors - Geometric displacements
STAS SR ISO 1023:1996 Aircraft - High pressure air charging valves

GSO

GSO ISO 3662:2015 Hydraulic fluid power -- Pumps and motors -- Geometric displacements
BH GSO ISO 3662:2016 Hydraulic fluid power -- Pumps and motors -- Geometric displacements
OS GSO ISO 3662:2015 Hydraulic fluid power -- Pumps and motors -- Geometric displacements
GSO ISO 8426:2010 Hydraulic fluid power -- Positive displacement pumps and motors -- Determination of derived capacity
OS GSO ISO 8426:2010 Hydraulic fluid power -- Positive displacement pumps and motors -- Determination of derived capacity

IN-BIS

IS 9772-1981 Specification for pneumatic high pressure grease pumps
IS 8866-1978 The filling ratio of high-pressure liquefiable gas in the cylinder and the corresponding expansion pressure
IS 5727-1981 Glossary of terms related to compressors and exhaust units

PL-PKN

PN M73321-1989 Hydraulic fluid power Positive displacement pumps, motors and integral transmissions Determination of steadystate performance
PN M73301-1988 Hydraulic fluid power Hydraulic pumps and motors The determination of airborne noise levels
PN-EN 16181-2018-09 P Soil, treated biowaste and sludge -- Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)

Standard Association of Australia （SAA）

AS 4637:2006 Measurement of pump displacement and free air delivery of a reciprocating air compressor package
AS 4621:2004 Regulators for use with liquefied petroleum - Vapour phase

SCC

AWWA JAW6740 Journal AWWA — Detecting an Algal Toxin by High-Pressure Liquid Chromatography
MIL MIL-P-5954A-1953 PUMP UNIT, HYDRAULIC, ELECTRIC MOTOR DRIVEN FIXED DISPLACEMENT (SUPERSEDING MIL-P-5954)
DIN EN 15911 E:2009 Draft Document - Foodstuffs - Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection; German version prEN 15911:2009
NS-EN 1762:2018 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) — Specification
NS-EN 1762:1997 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) — Specification
DANSK DS/EN 1762:2019 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) – Specification
DANSK DS/EN 16181:2018 Soil, treated biowaste and sludge – Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
NS-EN 16181:2018 Soil, treated biowaste and sludge - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
MIL MIL-DTL-81940C-2019 VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE II SYSTEMS
MIL MIL-DTL-81940/1C-2019 VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE II SYSTEMS
DANSK DS/CEN/TS 16181:2013 Sludge, treated biowaste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
AENOR UNE-EN 16125:2016 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapor pressure phase
VDI 2467 BLATT 2-1991 Measuring gaseous emissions; measuring the concentration of primary and secondary aliphatic amines using high performance liquid chromatography (HPLC)
NS-EN 16125:2015 LPG Equipment and Accessories — Pipework systems and supports — LPG in liquid phase and vapour pressure phase
06/30128779 DC ISO 8426. Hydraulic fluid power. Positive displacement pumps and motors. Determination of derived capacity
NS-EN 16125:2019 LPG Equipment and Accessories — Pipework systems and supports — LPG in liquid phase and vapour pressure phase
DANSK DS/EN 16125:2019 LPG Equipment and Accessories – Pipework systems and supports – LPG in liquid phase and vapour pressure phase
AWWA ACE56167 Hydraulic Considerations for Filter High-Rating
MIL MIL-DTL-24695/2B-2012 Vent and Test Valve Hose Assembly Hydraulic Service
DIN EN 16181 E:2010 Draft Document - Sludge, treated biowaste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatograhy (GC) and high performance liquid chromatography (HPLC); German version prEN 16181:2010
VDI 2467 BLATT 2-1991 Measuring gaseous emissions; measuring the concentration of primary and secondary aliphatic amines using high performance liquid chromatography (HPLC)
MIL MIL-P-19152A-1974 PACKINGS, HYDRAULIC, HIGH PRESSURE (FOR HYDROPNEUMATIC SYSTEMS) (SUPERSEDING MIL-P-19152)
VDI 2468 BLATT 7-2006 Measuring gaseous emissions — Measuring peroxyacetyl nitrate (PAN) — Gas chromatographic method
DANSK DS/ISO 22547:2021 Ships and marine technology – Performance test procedures for high-pressure pumps in LNG fuel gas supply systems (FGSS) for ships
DIN EN 16125 E:2018 Draft Document - LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase; German and English version prEN 16125:2018

United States Navy

NAVY MIL-P-19152 A NOTICE 2-1998 PACKINGS, HYDRAULIC, HIGH PRESSURE (FOR HYDROPNEUMATIC SYSTEMS)
NAVY MIL-P-19152 A-1974 PACKINGS, HYDRAULIC, HIGH PRESSURE (FOR HYDROPNEUMATIC SYSTEMS)
NAVY MS18301 REV B-1992 HIGH PRESSURE DRAIN ORIFICE PLATES AND STRAINERS
NAVY QPL-24402-35 NOTICE 1-2008 Filters (Hydraulic), Filter Elements (High Efficiency), and Filter Differential Pressure Indicators
NAVY QPL-24402-35-2000 FILTERS (HYDRAULIC), FILTER ELEMENTS (HIGH EFFICIENCY), AND FILTER DIFFERENTIAL PRESSURE INDICATORS
NAVY MIL-DTL-24695/1 B-2012 VALVE, VENT AND TEST HYDRAULIC SERVICE
NAVY MIL-DTL-24695/2 B-2012 VENT AND TEST VALVE HOSE ASSEMBLY HYDRAULIC SERVICE

VDI - Verein Deutscher Ingenieure

VDI 3482 Blatt 3-1979 Gaseous air pollution measurement; gas chromatographic determination of aromatic hydrocarbons - grab sampling

KR-KS

KS I ISO 17736-2020 Workplace air quality — Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography
KS C IEC 60512-2009 Identification by hour numbers of the phase conductors of 3-phase electric systems

British Standards Institution (BSI)

BS EN ISO 20763:2004 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
BS 7250:1989 Methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors
BS ISO 17736:2010 Workplace air quality. Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography
BS EN 16181:2018 Soil, treated biowaste and sludge - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
BS EN ISO 4126-10:2024 Safety devices for protection against excessive pressure - Sizing of safety valves and bursting discs for gas/liquid two-phase flow
BS EN 16125:2019 LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase

Natural Gas Processor's Association (NGPA)

GPA TP-5-1978 Relation of Liquid-Liquid Equilibrium Behavior at Low Temperatures to Vapor-Liquid Equilibria Behavior at High Temperatures and Elevated Pressures

Society of Automotive Engineers (SAE)

SAE J2747-2006 Hydraulic Pump Airborne Noise Bench Test
SAE ARP575B-1999 Filter Patch Testing Procedures for Aerospace Hydraulic Pumps and Motors
SAE ARP575A-1991 FILTER PATCH TESTING PROCEDURES FOR AEROSPACE HYDRAULIC PUMPS AND MOTORS
SAE AS595E-2022 General Requirements for the Design and Testing of Civil Type Pressure Compensated, Variable Delivery Hydraulic Pumps
SAE ARP575-1959 PROCEDURE AND METHOD EVALUATION OF FILTER PATCH TESTING FOR AIRCRAFT HYDRAULIC PUMPS

CZ-CSN

CSN 11 5510-1978 Hydraulie tests of storage pumps for hydro-electric power plants

SAE - SAE International

SAE J2747-2019 Hydraulic Pump Airborne Noise Bench Test
SAE ARP575B-2000 Filter Patch Testing Procedures for Aerospace Hydraulic Pumps and Motors
SAE ARP575A-1974 Filter Patch Testing Procedures for Aerospace Hydraulic Pumps and Motors

TH-TISI

TIS 875-1997 Pressure regulators for liquefied petroleum gases: high pressure

American Society for Testing and Materials (ASTM)

ASTM D6973-08e1 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
ASTM D6973-14 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
ASTM D6973-04 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
ASTM D6973-04e1 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
ASTM D6973-05 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
ASTM D6973-03 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

Defense Logistics Agency

DLA MIL-DTL-83296 A-2000 FITTINGS, CORROSION RESISTANT STEEL, HIGH TEMPERATURE HIGH PRESSURE (3000 PSI), HYDRAULIC AND PNEUMATIC
DLA QPL-83296-14-2006 FITTINGS, CORROSION RESISTANT STEEL, HIGH TEMPERATURE, HIGH PRESSURE (3000 PSI), HYDRAULIC AND PNEUMATIC
DLA MIL-DTL-83298 B-2000 HOSE, POLYTETRAFLUOROETHYLENE, HIGH TEMPERATURE, HIGH PRESSURE (3000 PSI), HYDRAULIC AND PNEUMATIC
DLA MIL-DTL-83296 A SUPP 1-2000 FITTINGS, CORROSION RESISTANT STEEL, HIGH TEMPERATURE HIGH PRESSURE (3000 PSI), HYDRAULIC AND PNEUMATIC
DLA QPL-83296-14 NOTICE 1-2008 FITTINGS, CORROSION RESISTANT STEEL, HIGH TEMPERATURE, HIGH PRESSURE (3000 PSI), HYDRAULIC AND PNEUMATIC
DLA QPL-83298-QPD-2010 Hose, Polytetrafluoroethylene, High Temperature High Pressure (3000 PSI), Hydraulic and Pneumatic

Compressed Gas Association (U.S.)

CGA E-11-2008 Stationary compressed gas cylinder discharging manifolds for working pressures up to 3000 PSIG

ES-UNE

UNE-EN 16125:2020 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
UNE-EN 17503:2022 Soil, sludge, treated biowaste and waste - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC) (Endorsed by Asociación Española de Normalización in March of 2022.)

European Committee for Standardization (CEN)

EN ISO 20763:2004 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
PD CEN/TS 16181:2013 Sludge, treated biowaste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
EN 16181:2018 Soil@ treated biowaste and sludge - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)

Others: