What is the ripple requirement of a general DC power supply?

What is the ripple requirement of a general DC power supply?, Total:204 items.

The international standard classification for "What is the ripple requirement of a general DC power supply?" includes: Fuses and other overcurrent protection devices , Thyristors , Rectifiers. Convertors. Stabilized power supply , Fluorescent lamps. Discharge lamps , Immunity , Paper and board insulating materials , Aerospace electric equipment and systems .

The Chinese standard classification for "What is the ripple requirement of a general DC power supply?" includes: Power semiconductor device and parts , Low-voltage distribution electrical equipment , AC/DC supply units , Electric light source products , Electromagnetic compatibility , Electrical insulating material and its products , Electrical system and equipment , Electric lighting in general .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 6829-2017 General Requirements for Residual Current Operated Protective Devices
GB/T 35702.1-2017 Power losses in voltage sourced converter(VSC)valves for high-voltage direct current(HVDC)systems―Part 1:General requirements

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/Z 40680-2021 General requirements for residual current operated protective devices for D.C. system
GB/T 21420-2008 General requirements for light-trigged thyristors for HVDC transmission
GB/T 20992-2007 General requirements for thyristors for HVDC transmission
GB 6829-1995 General requirements for residual current operated protective devices
GB/Z 6829-2008 General requirements for residual current operated protective devices
GB/T 21560.6-2008 Low-voltage power supplies d.c. output - Part 6: Requirements for low-voltage power supplies assessed performance
GB/T 17626.17-2005 Electromagetic Compatibility - Testing and measurement techniques - Ripple on d.c. input power port immunity test
GB/T 43723-2024 Semi-integrated LED-lamps for general lighting services with supply voltages not exceeding 50Va.c.r.m.s.or 120V ripple free d.c.—Performance requirements
GB 17478-1998 Low-voltage power supply devices, d.c.output--Performance characteristics and safety requirements
GB/T 21217.1-2007 Corrugated pressboard and presspaper for electrical purposes - Part 1: Definitions designations and general requirements

Group Standards of the People's Republic of China

T/CEEIA 331-2018 General requirements for residual current operated protective devices for D.C. system

Military Standard of the People's Republic of China-General Armament Department

GJB 3706-1999 General requirements for ground power supply characteristics of military helicopters
GJB 3709-1999 General requirements for military helicopter Doppler navigation systems

Professional Standard - Aviation

HB 6498-1991 Design requirements for aircraft DC power supply system
HB 7881-2008 General requirements for direct current power supplies of airborne electronic

Professional Standard - Light Industry

QB/T 3573-1999 Carriage Plywood with Sliced Veneer - Terms and Definitions

Professional Standard - Nuclear Industry

EJ/T 765-1993 General requirements for radioactive sources used in continuous monitoring instruments for radioactive effluents from nuclear power plants

RU-GOST R

GOST R 50619-1993 Metal multylevels bellows for compensation. Types, general requirements
GOST R IEC 925-1998 D.c. supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
GOST 2585-1981 D.c. circuit-breakers with rapid auto-reclosing. General technical requirements
GOST 18126-1994 Bolts and nuts with thread diameter over 48 mm. General specifications
GOST 18126-1972 Bolts, studs and nuts with thread diameter over 48 mm. Specifications
GOST 28697-1990 Programme and test methods of bellows compensators and seals. General requirements
GOST R 51571-2000 Metal bellows expansion joints and seals. General technical requirements
GOST 12503-1975 Steel. Methods of ultrasonil control. General requirements
GOST R IEC 924-1998 D.c. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
GOST 7746-2001 Current transformers. General specifications
GOST 23480-1979 Non-destructive testing. Radio wave methods. General requirements
GOST R 54373-2011 Low-voltage power supplies, d.c. output. Part 6. Requirements for low-voltage power supplies of assessed performance

International Electrotechnical Commission (IEC)

IEC 60924:1990 D.C. supplied electronic ballasts for tubular fluorescent lamps; general and safety requirements
IEC 62751-1:2014+AMD1:2018+AMD2:2022 CSV Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements
IEC 62751-1:2014+AMD1:2018 CSV Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements
IEC 62751-1:2014/AMD1:2018 Amendment 1 - Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements
IEC 62751-1:2014/AMD2:2022 Amendment 2 - Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements
IEC 62612:2013+AMD1:2015+AMD2:2018 CSV Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
IEC 62612:2013/AMD2:2018 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
IEC 60928:1995 Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements
IEC 62612:2013/AMD1:2015 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
IEC 60928:1999 Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements
IEC 62612:2013+AMD1:2015 CSV Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
IEC TR 60755:2008 General requirements for residual current operated protective devices
IEC 61628-1:1997 Corrugated pressboard and presspaper for electrical purposes - Part 1: Definitions, designations and general requirements

CENELEC - European Committee for Electrotechnical Standardization

EN 61046:1994 D.C. or a.c. Supplied Electronic Step-Down Convertors for Filament Lamps - General and Safety Requirements
EN 60924:1991/A1:1991 D.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements (Incorporates Amendment A1: 1994)
EN 61046:1992/A1:1992 AMD 1 D.C. or a.c Supplied Electronic Step-Down Convertors for Filament Lamps - General and Safety Requirements
EN 61046:1994/A1:1994 D.C. or a.c. Supplied Electronic Step-Down Convertors for Filament Lamps - General and Safety Requirements (Incorporates Amendment A1: 1996)
EN 60928:1995 Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements (Incorporates Amendment A1: 1999)
EN 60928:1994 A.C. Supplied Electronic Ballasts for Tubular Fluorescent Lamps - General and Safety Requirements

RO-ASRO

STAS 192-1978 TOILET SOAPS General technical requirements for quality
STAS 12028-1981 DIRECT-CURRENT RESISTIVE VOLT General technical requirements for quality
STAS 11080-1978 DIRECT-CURRENT POTENTIO- METERS General technical requirements for quality
STAS 11396-1980 D. C. BRIDGES FOR MEASURING RESISTANCE General technical requirements for quality
STAS 11119-1978 COMBINED-VOLTAGES TEST OF SELF-RESTORING INSULATION. General requirements
STAS 12000-1981 DIRECT CURRENT MILL MOTORS General technical requirements for quality
STAS 12756-1989 DIRECT CURRENT ELECTRICALENGINES FOR AIRCRAFT General technical requirements for quality
STAS 1703/1-1980 Power transformers GENERAL TECHNICAL REQUIRE- MENTS FOR QUALITY

European Committee for Standardization (CEN)

EN 60924:1991 D.C. supplied electronic ballasts for tubular fluorescent lamps; general and safety requirements (IEC 924:1990)
EN 61046:1992 D.C. or A.C. supplied electronic step-down convertors for filament lamps; general and safety requirements (IEC 1046:1991)
EN 60928:1991 A.C. supplied electronic ballasts for tubular fluorescent lamps; general and safety requirements (IEC 928:1990)

British Standards Institution (BSI)

BS EN IEC 62751-1:2014+A2:2022 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - General requirements
PD IEC/TS 63053:2017 General requirements for residual current operated protective devices for DC systems
BS EN 62751-1:2014+A1:2018 Power losses in voltage sourced converter (VSC) valves for high - voltage direct current (HVDC) systems Part 1 : General requirements
BS EN 62838:2016(2017) LEDsi lamps for general lighting services with supply voltages not exceeding 50 V A.C. r . m . s . or 120 V ripple free D.C. - Safety specifications
BS EN 60928:1995 Auxiliaries for lamps. a.c. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
BS EN 61204-7:2006 Low-voltage power supplies, d.c. output - Safety requirements
21/30432552 DC BS EN 62751-1 AMD2. Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems. Part 1. General requirements
BS EN 60939-2:2005 Passive filter units for electromagnetic interference suppression - Sectional specification: passive filter units for which safety tests are appropriate - Test methods and general requirements
BS EN 61046:1995 Specification for d.c. or a.c. supplied electronic step-down convertors for filament lamps. General and safety requirements
BS EN 61204-6:2001 Low voltage power supplies, d.c. output. Requirements for low-voltage power supplies of assessed performance
BS EN 62612:2013+A2:2018 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V. Performance requirements
BS IEC 60755-1:2022 General safety requirements for residual current operated protected devices - Residual current operated protective devices for DC systems
BS ISO 6858:2017 Aircraft. Ground support electrical supplies. General requirements
BS EN IEC 62037-1:2021 Passive RF and microwave devices, intermodulation level measurement. General requirements and measuring methods
PD IEC TS 62786-1:2023 Distributed energy resources connection with the grid. General requirements
BS EN IEC 62932-2-1:2020 Flow battery energy systems for stationary applications - Performance general requirements and test methods

SCC

13/30281739 DC BS EN 62838. Self-ballasted LED-lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. Safety specification
DANSK DS/EN 62838/AC:2016 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications
DANSK DS/EN 62838:2016 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications
BS PD IEC/TS 63053:2017 General requirements for residual current operated protective devices for DC systems
CEI EN 62751-1/A2:2015 Determination of power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems Part 1: General requirements
CEI EN 62751-1:2015 Determination of power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems Part 1: General requirements
DIN EN 62838 E:2014 Draft Document - Self-ballasted LED-lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specification (IEC 34A/1661/CD:2013)
BS EN 60924:1991 Specification for general and safety requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps
UNE-EN 60924/A1:1996 D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS. GENERAL AND SAFETY REQUIREMENTS.
UNE-EN 60924:1994 D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS. GENERAL AND SAFETY REQUIREMENTS.
UNE-EN 61046:1996 D.C. OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTORS FOR FILAMENT LAMPS. GENERAL AND SAFETY REQUIREMENTS.
AENOR UNE-EN 62838/AC-11:2016 Semi-integrated LED lamps for general lighting services with supply voltages not exceeding 50 V effective in alternating current or 120 V without ripple in direct current. Safety specifications.
AENOR UNE-EN 62838:2016 Semi-integrated LED lamps for general lighting services with supply voltages not exceeding 50 V effective in alternating current or 120 V without ripple in direct current. Safety specifications.
DIN IEC /TS 63053:2018 General requirements for residual current operated protective devices for D.C. systems (IEC/TS 63053:2017)
AENOR UNE-EN 62612/A11:2017 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
AENOR UNE-EN 62612/AC-10:2016 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
12/30252799 DC BS EN 62751-1-1. Determination of power losses in voltage sourced converter (VSC) for HVDC systems. Part 1. General requirements
BS EN 61046:1992 Specification for d.c. or a.c. supplied electronic step-down convertors for filament lamps. General and safety requirements
AS 1431.1:1974 Control switching devices for voltages up to 650 V a.c. and 250 V d.c. - General requirements
BS 88-1:1975 Specification for cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c.-General requirements
IEC 60924:1990/AMD1:1993 Amendment 1 - D.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements
DIN IEC /TS 63053 E:2016 Draft Document - General requirements for residual current operated protective devices for D.C. System (IEC 23E/954/CD:2016)
CEI EN 62612:2015 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
DIN EN 62751-1/A2 E:2022 Draft Document - Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements (IEC 22F/648/CDV:2021); German and English version EN 62751-1:2014/prA2:2021
DANSK DS/EN 62612:2013 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
DANSK DS/EN 62612/A2:2013 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
BS EN 62612:2013+A11:2017 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V. Performance requirements
AENOR UNE-EN 62612/A1:2017 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
CEI EN 62612/A2:2015 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
DIN EN 62751-1/A1 E:2016 Draft Document - Determination of power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements (IEC 22F/423/CD:2016)
UNE-EN 61347-2-4:2002 Lamp controlgear -- Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting.
UNE-EN 61046/A1:1996 AUXILIARIES FOR LAMPS. D.C: OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTORS FOR FILAMENT LAMPS. GENERAL AND SAFETY REQUIREMENTS.
CEI EN 61204-6:2001 Low-voltage power supplies, DC output - Part 6: Requirements for low-voltage power supplies of assessed performance
DIN EN 62612/A11 E:2017 Draft Document - Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements; German version EN 62612:2013/A11:2017

Association Francaise de Normalisation

NF C72-838*NF EN 62838:2016 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications
NF EN 62751-1/A1:2018 Power losses in voltage source converter (VSC) valves of high voltage direct current (HVDC) systems - Part 1: general requirements
NF EN 62751-1:2015 Power losses in voltage source converter (VSC) valves of high voltage direct current (HVDC) systems - Part 1: general requirements
NF EN 62751-1/A2:2022 Power losses in voltage source converter (VSC) valves of high voltage direct current (HVDC) systems - Part 1: general requirements
NF C71-234:1992 D.C. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements.
NF C26-136-1*NF EN 61628-1:1998 Corrugated pressboard and presspaper for electrical purposes. Part 1 : definitions, designations and general requirements.
NF C53-751-1/A1*NF EN 62751-1/A1:2018 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1 : general requirements
NF C53-751-1*NF EN 62751-1:2015 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1 : general requirements
NF C53-751-1/A2*NF EN 62751-1/A2:2022 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1 : general requirements
NF C71-235:1992 D.C. supplied electronic ballast for tubular fluorescent lamps. Performance requirements.
NF C71-238/A1:2001 Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements.
NF C71-238:1996 Auxiliaries for lamps. A.C. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements.
NF C53-204-7/A11:2010 Low voltage power supplies, d.c. output - Part 7 : safety requirements.
NF C53-204-7:2007 Low voltage power supplies, d.c. output - Part 7 : safety requirements.
NF C71-241:1993 D.C. or A.C. supplied electronic step-down convertors for filament lamps. Performance, requirements.

European Committee for Electrotechnical Standardization（CENELEC）

EN 62838:2016 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications
EN 62838:2016/AC:2017-11 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications
EN 62751-1:2014 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements
EN 61204-6:2001 Low-Voltage Power Supplies, DC Output Part 6: Requirements for Low-Voltage Power Supplies of Assessed Performance

ES-UNE

UNE-EN 62838:2016/AC:2017-11 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications
UNE-EN 62838:2016 LEDsi lamps for general lighting services with supply voltages not exceeding 50 v a.c. r.m.s. or 120 v ripple free D.C. - Safety specifications
UNE-EN 62751-1:2014 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements (Endorsed by AENOR in December of 2014.)
UNE-EN 62751-1:2014/A2:2022 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements (Endorsed by Asociación Española de Normalización in June of 2022.)
UNE-EN 62751-1:2014/A1:2018 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements (Endorsed by Asociación Española de Normalización in August of 2018.)
UNE-EN IEC 62052-41:2022 Electricity metering equipment - General requirements, tests and test conditions - Part 41: Energy registration methods and requirements for multi-energy and multi-rate meters (Endorsed by Asociación Española de Normalización in January of 2023.)
UNE-EN 62612:2014/AC:2016-10 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
UNE-EN 62612:2014/A2:2019 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements

SE-SIS

SIS SS-EN 60 924-1991 D.C. supplied electronic ballasts for tubular fluorescent lamps — General and safety requirements
SIS SS-EN 60 928-1991 A.C. supplied electronic ballasts for tubularfluorescent lamps - General and safety requirements

PL-PKN

PN E06512-1989 D.c.volt resistive ratio boxes General requirements and tests
PN T06502-1971 Electronic oscilloscopes General re?uirements and test methods
PN T06504-1987 Electronic measuring equipments Electronic stabilized d.c. supply apparatus General requirements and tests
PN T06506-1974 Digital elektronie DC voltrnefters and analog to digital convertors Generale re?uiremenits and tests

KR-KS

KS C IEC TS 63053-2023 General requirements for residual current operated protective devices for DC systems
KS C IEC 62612-2020 Self-ballasted LED lamps for general lighting services with supply voltages >50 V － Performance requirements

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1277-2010 General requirements and test code for dry-type and oil-immersed smoothing reactors for dc power transmission
IEEE Std 1277-2000 (Trial Use) IEEE Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission
IEEE Unapproved Draft Std P1277/D6, Nov 2009 Draft Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission
IEEE Unapproved Draft Std P1277/D5, Aug 2009 Draft Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission

ZA-SANS

SANS 60146-1-1:1991 Semiconductor convertors - General requirements and line commutated convertors Part 1-1: Specification of basic requirements
SANS 61204-6:2000 Low-voltage power supplies, d.c. output Part 6: Requirements for low-voltage power supplies of assessed performance
SANS 61347-2-4:2000 Lamp controlgear Part 2-4: Particular requirements for d.c supplied electronic ballasts for general lighting
SANS 61204-7:2008 Low-voltage power supplies, d.c. output Part 7: Safety requirements
SANS 60146-1-3:1991 Semiconductor convertors - General requirements and line commutated convertors Part 1-3: Transformers and reactors

Society of Automotive Engineers (SAE)

SAE AIR6005-2009 General Requirements for WDM Backbone Networks

U.S. Air Force

AIR FORCE MIL-STD-1539-1973 ELECTRICAL POWER, DIRECT CURRENT, SPACE VEHICLE DESIGN REQUIREMENTS
AIR FORCE MIL-STD-1539 NOTICE 2-1998 ELECTRICAL POWER, DIRECT CURRENT, SPACE VEHICLE DESIGN REQUIREMENTS
AIR FORCE MIL-STD-1539 VALID NOTICE 1-1992 ELECTRICAL POWER, DIRECT CURRENT, SPACE VEHICLE DESIGN REQUIREMENTS

IEC - International Electrotechnical Commission

TS 63053-2017 General requirements for residual current operated protective devices for DC systems (Edition 1.0)

Korean Agency for Technology and Standards (KATS)

KS C 7027-2011 DC power supply for multimedia players
KS C IEC 62612:2020 Self-ballasted LED lamps for general lighting services with supply voltages >50 V － Performance requirements
KS C IEC 60925:2003 D.C. supplied electronic ballasts for tubular fluorescent lamps-Performance requirements
KS C IEC 60925:2013 D.C. supplied electronic ballasts for tubular fluorescent lamps－Performance requirements
KS C IEC 61204-6-2003(2008) Low－voltage power supply device, d.c. output－Requirements for low－voltage power supplies of assessed performance
KS C IEC 61347-2-4:2002 Lamp controlgear-Part 2 - 4:Particular requirements for d.c. supplied electronic ballasts for general lighting
KS W 0635-2013 Aircraft-Ground support electrical supplies - General requirements
KS C IEC 61347-2-4:2014 Lamp controlgear－Part 2 - 4：Particular requirements for d.c. supplied electronic ballasts for general lighting
KS C IEC 61347-2-4-2002(2012) Lamp controlgear－Part 2 - 4：Particular requirements for d.c. supplied electronic ballasts for general lighting
KS C IEC 61204-7-2014(2019) Low-voltage power supplies, d.c. output — Part 7: Safety requirements

Standard Association of Australia （SAA）

AS/NZS 61347.2.4:2002 Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for general lighting
AS/NZS 62838:2020 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. — Safety specifications (IEC 62838:2015 (ED.1.0)/COR1:2017, MOD)
AS/NZS 61046:2001 Auxiliaries for lamps - D.C. or A.C. supplied electronic step-down convertors for filament lamps - General and safety requirements

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 1277-2000 Trial-Use Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission
IEEE C57.129-2007 General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers

BE-NBN

NBN C 71-046-1992 ELEKTRONISCHE SPANNINGSREGELAARS MET GELIJKSPANNINGS-OF WISSELSPANNINGSVOEDING VOOR GLOEILAMPEN Algemene eisen en veiligheidseisen

International Telecommunication Union (ITU)

ITU-T G.9802.1-2021 Wavelength division multiplexed passive optical networks (WDM PON): General requirements

NL-NEN

NEN 10924/A1-1994 D.C.supplied electronic ballasts for tubular fluorescent lamps.General and safety requirements(IEC 924:1990/A1:1993)
NEN 10928/A2-1994 A.C.supplied electronic ballasts for tubular fluorescent lamps.General and safety requirements(IEC 928:1990/A1:1992+A2:1993)

GOSTR

GOST 9486-1979 Alternating current measuring bridges. General requirements

Lithuanian Standards Office

LST EN 60924+A1-1999 D.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements (IEC 60924:1990)

IN-BIS

IS 3437-1972 General requirements for direct-reading pointer electronic voltmeters
IS 9647-1986 General requirements and test methods for low frequency connectors including direct current below 3 MHz

German Institute for Standardization

DIN EN 62612:2019-04 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements (IEC 62612:2013 + A1:2015 + COR1:2016 + A2:2018); German version EN 62612:2013 + AC:2016 + A1:2017 + A11:2017 + A11:2017/AC:2017 + A2:2018 ...
DIN EN 61628-1:1999 Corrugated pressboard and presspaper for electrical purposes - Part 1: Definitions, designations and general requirements (IEC 61628-1:1997); German version EN 61628:1997

GSO

OS GSO 2226:2012 General Requirements for Energy Products
BH GSO 2226:2013 General Requirements for Energy Products
OS GSO IEC 61204-6:2014 Low-voltage power supplies, d.c. output - Part 6: Requirements for low-voltage power supplies of assessed performance

Danish Standards Foundation

DS/EN 61046:1995 D.C. or a.c. supplied electronic step-down convertors for filament lamps - General and safety requirements
DS/EN 61204-6:2001 Low-voltage power supplies, DC output - Part 6: Requirements for low-voltage power supplies of assessed performance

United States Navy

NAVY MIL-V-85603-1989 VOLTMETER, DC, AIRCRAFT, DIGITAL DISPLAY GENERAL SPECIFICATION FOR
NAVY QPL-85071-3-1995 INVERTERS, AIRCRAFT, DC TO AC, GENERAL SPECIFICATION FOR
NAVY QPL-85071-4 NOTICE 1-1999 INVERTERS, AIRCRAFT, DC TO AC, GENERAL SPECIFICATION FOR

Japanese Industrial Standards Committee (JISC)

JIS C 8473:2006 Lighting busways -- Particular safety requirements for power supply use -- Part 1: General requirements
JIS W 7007:1991 Aircraft -- Ground support electrical supplies -- General requirements

HU-MSZT

MNOSZ 13201-1952 General industrial requirements for oscillating high-current wires

Defense Logistics Agency

DLA A-A-55571 C-2007 CIRCUIT BREAKER, 28 VOLTS (V) DC, MANUAL AND AUTOMATIC RESET, GENERAL REQUIREMENTS FOR
DLA A-A-59465 A-2004 DELAY LINES, ACTIVE, GENERAL REQUIREMENTS FOR

AENOR

UNE-EN 61800-1:1999 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS. PART 1: GENERAL REQUIREMENTS. RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS.
UNE-EN 61204-6:2001 Low-voltage power supplies, DC output -- Part 6: Requirements for low-voltage power supplies of assessed performance.

DIN

DIN EN 62751-1:2023 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements (IEC 62751-1:2014 + A1:2018 + AMD2:2022); German version EN 62751-1:2014 + A1:2018 + A2:2022

AT-OVE/ON

OVE EN IEC 62751-1/A2:2021 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements (IEC 22F/648/CDV) (english version) (Amendment)

CZ-CSN

CSN 35 4870-1988 Lightning arresters for alternating current. General technical requirements.

GOST

GOST 35002-2023 Technical diagnostics. Determination of the cracks depth on the steel products surface by ultrasonic method using surface waves. General requirements

Others: