Does the first-level meter have national standard inspection?

Does the first-level meter have national standard inspection?, Total:134 items.

The international standard classification for "Does the first-level meter have national standard inspection?" includes: Application of statistical methods , Energy and heat transfer engineering in general , Installations in buildings , Landscaping and silviculture , Extraction and processing of petroleum and natural gas .

The Chinese standard classification for "Does the first-level meter have national standard inspection?" includes: Mechanics Measurement , Ionizating Radiation Measurement , Metal equipment and process pipe installation engineering , Mathematics , Technical management , Heat supply, air supply, air conditioning and refrigerating engineering in general , Seed, seedling, seedling nursery , Petroleum drilling .

National Metrological Verification Regulations of the People's Republic of China

JJG 2089-1990 60Coγ-ray Water Absorbed Dose Measuring Instruments for Radiation Processing Lev
JJG 2049-1990 Measuring Instruments for International Rubber Hardness Degree
JJG 2006-1996 Verification Scheme for Measuring Instruments of Hardness Testing on Shore Scale D
JJG 2043-1989 Verification Scheme of Measuring Instruments for (Treatment Magnitude) Exposure of (60~250) kV X-ray

Taiwan Provincial Standard of the People's Republic of China

CNS 4798.5-1994 Method of test for toy safety (Testing for toxic substance content)
CNS 4798-5-1994 Method of test for toy safety (Testing for toxic substance content)

Group Standards of the People's Republic of China

T/SHST 000004-2019 Standard for Quality Evaluation and Detection of Existing Stone Curtain Wall

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB/J 2739-1996 General rules for drafting of hierarchy schemes of measuring instrument for national defence

Professional Standard - Non-ferrous Metal

YS/T 5435-2020 Inspection and evaluation standards for underground opening quality of nonferrous metal mine
YS/T 5419-2013 Unified Standards for Constructional Quality Inspection and Assessment of Non-ferrous Metals Industrial Installation Engineering
YS/T 5430-2016 Unified standards for constructional quality inspection and assessment of nonferrous metal industrial building engineering

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 8054-2008 Single sampling procedures and tables for Inspection having desired operating Characteristics by variables
GB/T 28863-2012 Sampling inspection procedures for commodity applying to the case with prior information of quality
GB/T 20902-2007 Specification for equipping and managing of the measuring instrument of energy in the nonferrous metals smelters

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 36503-2018 Quality inspection and grade evaluation for gas-burning appliances

Professional Standard - Navy

HJB 324.6-2006 Part 6: 814.06.80 Steering Gear Test Bench

Professional Standard - Forestry

LY/T 2100-2013 Technical regulations on quality inspection of cutting area inventory and design in key state-owned forests of Inner Mongolia and Northeast China

Professional Standard - Petroleum

SY 5416.4-2007 Measurement and Inspection of Directional Well Surveying Instruments Part 4; Wired While Drilling
SY/T 5416.4-2007 Measurement and inspection regulation of directional surveying instruments Part 4:Measurement while drilling with wireline

RU-GOST R

GOST 8.120-1999 State system for ensuring the uniformity of measurement. State verification schedule for means measuring pH
GOST 8.036-1974 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring mass of radium
GOST 8.016-1981 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring plane angle
GOST 8.017-1979 State system for ensuring the uniformity of measurements. State primar standard and all-union verification schedule for means measuring pressure up to 250 MPa
GOST 8.029-1980 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring inductance
GOST 8.541-1986 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring torque of force
GOST 8.065-1985 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for force measuring instruments
GOST 8.028-1986 State system for ensuring the uniformity of measu rements. State primary standard and state verification schedule for means measuring electrical resistance
GOST 8.065-1973 State system for ensuring the uniformity of measurements. The state primary standard of unit of force
GOST 8.022-1991 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for measuring instruments of direct current strength over range from 1·10 in minus 16 degree up to 30A
GOST 8.547-1986 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring relative humidity of gases
GOST 8.498-1998 State system for ensuring the uniformity of measurement. State verification scheme for means of measuring electrical quality factor
GOST R 8.886-2015 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the velocity of air flow
GOST 8.021-2005 State system for ensuring the uniformity of measurements. State verification schedule for mass measuring instruments
GOST 8.021-1984 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring mass
GOST 8.498-1983 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means of measuring electrical quality factor
GOST 8.645-2014 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring of the complex refractive index
GOST 8.034-1982 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring exposure dose, exposure dose rate and fluense energy of X-and-gamma radiation
GOST 8.096-1982 State system for ensuring the uniformity of measurements. The 1-st order micromanometers of MKM-type. Methods and means of verification
GOST 8.243-1977 State system for ensuring the uniformity of measurements. Measuring transducers for pressure differences with unified mutual inductance output parameters of the SSI. Methods and means of verification
GOST 8.019-1985 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring electrical capacity and tangent loss angle
GOST 8.027-2001 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of direct electrical vortage and electromotive force
GOST 8.142-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring mass flow of liquid within the range of 1·10 in minus 3 degree up to 2·10 in 3 degree kg/s
GOST 8.027-1989 State system for ensuring the uniformity of measuremente. State primary standard and state verification schedule for measuring instruments of electromotive force and direct current
GOST 8.240-1977 State system for ensuring the uniformity of measurements. Measuring transducers for pressure differences with unified current output signals of the SSI. Methods and means of verification
GOST 8.182-1976 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring spectrum parameters of electronic paramagnetic resonance
GOST 8.035-1982 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring absorbed dose and absorbed dose rate of beta-radiation
GOST 8.231-1984 State system for ensuring the uniformity of measurements. State primay standard and all-union verification schedule for means measuring magnetic moment, magnetic susceptibility and magnetization
GOST 8.145-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring volumetric flow of liquids within the range of 3·10 in minus 6 degree up to 10 m3/sec
GOST 8.026-1996 State system for ensuring the uniformity of measurements. State verification schedule for means measuring energy of combustion and specific energy of combustion (combustion calorimeters)
GOST 8.026-1979 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring quantity of heat
GOST 8.465-1982 State system of ensuring the unity of measurements. Actial frequency of limited accuracy. Methods and means of verification
GOST 8.510-2002 State system for ensuring the uniformity of measurements. State verification schedule for means measuring volume and mass of liquid
GOST 8.510-1984 State system for ensuring the uniformity of measurements. State verification schedule for means measuring (meters) volume of liquid
GOST 8.018-2007 State system for ensuring the uniformity of measurements. State verification schedule for means of LTEC measurements of solid substances in temperature range from 90 to 1800 K
GOST 8.371-1980 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring electrical capacity
GOST 8.018-1982 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring temperature coefficient of linear expansion in the range from 90 to 1800 K
GOST R 51233-1998 State system for the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. General requirements
GOST 8.141-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means, measuring specific heat of solid bodies within temperature range of 273,15 up to 700 K
GOST 8.637-2013 State system for ensuring the uniformity of measurements. State verification schedule of multiphase flow measuring tools
GOST R 8.571-1998 State system for ensuring the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. Methods of calibration
GOST 8.205-1990 State system for ensuring the uniformity of measurements. State verification schedule for measurement means of chroma coordinates and chromaticity coordinates
GOST R 8.735.1-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in liquid and solid substances and materials. Transfer of the units from the State Primary Standard based on coulomet
GOST 29169-1991 Laboratory glassware. One-mark pipettes
GOST R 8.768-2011 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of relative permittivity and relative permeability at frequency range from 1 MHz to 18 GHz

RO-ASRO

STAS 3834-1983 Laboratory glasswere NON GRADUATED GLASS TUBES
STAS 8420-1986 TECHNICAL THERMOMETRES WITH ELECTRIC REZISTANCE General technical requirements for quality

European Committee for Standardization (CEN)

EN 417:2012 Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking
prEN 442-1991 Radiators, convectors and similar appliances; testing and rating standard

SE-SIS

SIS SEN 32 01 00-1971 Vacuum cleaners. Methods for measuring performance. International recommendation's validity as Swedish Standard
SIS SEN 43 04 00-1971 Fixed capacitors for electronic equipment. Survey of standards. International recommendations'validity as Swedish standard
SIS SEN 24 06 00-1975 Insulators. Survey of standards. International recommendations' validity as Swedish standard
SIS SEN 43 30 00-1974 Printed circuits. Survey of standards. International recommendations' validity as Swedish standard
SIS SEN 31 00 00-1975 Lighting equipment. Survey of standards. International recommendations' validity as Swedish standard
SIS SEN 47 10 00-1976 Radio interference. Survey of standards. International recommendations' validity as Swedish standard
SIS SEN 43 32 00-1973 Semiconductor devices. Survey of standards. International recommendations' validity as Swedish standard
SIS SEN 43 71 00-1975 Magnetic materials and components. Survey of standards. International recommendations' validity as Swedish standard
SIS SEN 36 04 00-1972 Electrical equipment of machine tools. Survey of standards. International recommendations' validity as Swedish Standard
SIS SEN 47 01 00-1973 Radio transmitters. Survey of standards. International recommendations' validity as Swedish standard
SIS SS 428 04 00-1978 Valve type surge arresters - Survey of standards - International standard's validity as Swedish standard

SCC

ASA S12.68-2007(R2020) American National Standard for Methods of Estimating Effective A-Weighted Sound Pressure Levels When Hearing Protectors are Worn
AWWA ACE58101 Use of CFD Tool for the Design of New and Upgraded Existing Service Reservoirs in London (UK)
CISPR 5:1967 Radio interference measuring apparatus having detectors other than quasi-peak
AENOR UNE-EN ISO 8536-13:2017 Infusion set for medical use. Part 13: Single-use graduated flow regulators with fluid contact. (ISO 8536-13:2016).
DIN 55350-17:1988 Concepts in quality and statistics; concepts relating to quality inspection and test
DANSK DS/EN 12457-2:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
IEC 60255-6A:1980 First supplement - Electrical relays - Part 6: Measuring relays with more than one input energizing quantity

CZ-CSN

CSN ON 56 3005-1964 Quality standards for containers for cakes and ice cream without fillings

GOST

GOST 8.120-1983 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring pH

British Standards Institution (BSI)

DD ISO/TS 4869-5:2006 Acoustics. Hearing protectors - Method for estimation of noise reduction using fitting by inexperienced test subjects
BS EN 30-1-2:2023 Domestic cooking appliances burning gas Part 1 - 2 : Safety — Appliances having forced - convection ovens
BS EN IEC 62149-11:2020 Fibre optic active components and devices. Performance standards - Multiple channel transmitter/receiver chip scale package with multimode fibre interface

BELST

STB 8057-2015 System for ensuring the uniformity of measurements of the Republic of Belarus. Etalon manometers and deformation vacuum gauges with conventional scales. Methods of verification
STB 8085-2019 System for ensuring the uniformity of measurements of the Republic of Belarus. Temperature transducers with unified output signal. Methods of verification
STB 8071-2017 System for ensuring the uniformity of measurements of the Republic of Belarus. Ultrasonic transducers with flat working surface. Methods of verification

Society of Automotive Engineers (SAE)

SAE AS708B-2014 Top Visual Quality (TVQ) O-ring Packings and Gaskets - Surface Inspection Guide and Acceptance Standard
SAE AS708A-1990 Top Visual Quality (TVQ) O-ring Packings and Gaskets - Surface Inspection Guide and Acceptance Standard

IETF - Internet Engineering Task Force

RFC 3686-2004 Using Advanced Encryption Standard (AES) Counter Mode With IPsec Encapsulating Security Payload (ESP)

Association Francaise de Normalisation

NF B35-509:1983 Laboratory glassware. Enclosed-scale calorimeter thermometers.
NF B35-507:1983 Laboratory glassware. Enclosed-scale general purpose thermometers.
NF C44-109:1996 Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2).
NF EN 62058-21:2010 Electricity (AC) metering equipment - Acceptance inspection - Part 21: particular requirements for electromechanical active energy meters (classes 0.5, 1 and 2, class A and B indices)
NF E29-790*NF EN 417:2012 Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without valve, for use with portable appliances - Construction, inspection, testing and marking

Korean Agency for Technology and Standards (KATS)

KS A 3108-1972(2001) SEQUENTIAL SAMPLING INSPECTION PLANS FOR PERCENT DEFECTIVES HAVING DESIRED OPERATING CHARACTERISTICS BY VARIABLES (STANDARD DEVIATION KNOWN)
KS A 3108-1986 SEQUENTIAL SAMPLING INSPECTION PLANS FOR PERCENT DEFECTIVES HAVING DESIRED OPERATING CHARACTERISTICS BY VARIABLES (STANDARD DEVIATION KNOWN)
KS C IEC 61358:2005 Acceptance inspection for direct connected alternating current static watt-hour meters for active energy(classes 1 and 2)
KS A 3108-2002 SEQUENTIAL SAMPLING INSPECTION PLANS FOR PERCENT DEFECTIVES HAVING DESIRED OPERATING CHARACTERISTICS BY VARIABLES (STANDARD DEVIATION KNOWN)
KS C IEC 62058-21-2017(2022) Electricity metering equipment (AC) ― Acceptance inspection ― Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2)
KS A 3102-2013 Single sampling inspection plans by attributes having desired operating characteristics
KS C IEC 62058-21-2022 Electricity metering equipment (AC) ― Acceptance inspection ― Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2)
KS Q 1001-2005(2011) Single sampling inspection plums having desired operationcharacteristics by variables(Standard deviation known)

Danish Standards Foundation

DS/EN ISO 13791:2012 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures
DS/ISO/TS 4869-5:2007 Acoustics - Hearing protectors - Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects

International Electrotechnical Commission (IEC)

IEC 61358:1996 Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2)
IEC 62058-31:2008 IEC 62058-31: Electricity metering equipment (AC) - Acceptance inspection - Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2)
IEC 62058-21:2008 Electricity metering equipment (AC) - Acceptance inspection - Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2)

IX-EU/EC

79/830/EEC-1979 Council Directive on the Approximation of the Laws of the Member States Relating to Hot-Water Meters
78/1031/EEC-1978 Council Directive on the Approximation of the Laws of the Member States Relating to Automatic Checkweighing and Weight Grading Machines
73/362/EEC-1973 Council Directive on the Approximation of the Laws of the Member States Relating to Material Measures of Length

ES-UNE

UNE-EN 62058-21:2010 Electricity metering equipment (ac) - Acceptance inspection -- Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2) (Endorsed by AENOR in February of 2011.)

Lithuanian Standards Office

LST EN ISO 13791:2012 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2012)

HU-MSZT

MSZ 4851/2-1971 Touch protection check measures ground resistance and specific soil resistance at 1000 V without tram supply current for greater tension in the device

GOSTR

GOST 8.018-2018 The State system for ensuring the uniformity of measurements. State verification schedule for means of LTEC measurements of solids from 0,01х10 -6 to 100х10 -6 К -1 substance in temperature range from 90 to 3000 K

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

ITU-T D.178-1989 Monthly Accounts for Semi-Automatic Telephone Calls (Ordinary and Urgent Calls@ with or without Special Facilities) - General Tariff Principles - Charging and Accounting in International Telecommunications Services (Study Group III) 1 pp
ITU-T G.151 FRENCH-1988 OBJECTIFS GENERAUX DE QUALITE DE FONCTIONNEMENT APPLICABLES A TOUS LES CIRCUITS INTERNATIONAUX ET NATIONAUX DE PROLONGEMENT MODERNES
ITU-T G.151 SPANISH-1988 OBJETIVOS GENERALES DE CALIDAD DE FUNCIONAMIENTO APLICABLES A TODOS LOS CIRCUITOS MODERNOS INTERNACIONALES Y NACIONALES DE PROLONGACION

Institute of Electrical and Electronics Engineers (IEEE)

ANSI N322-1997 American National Standard Inspection, Test, Construction, and Performance Requirements for Direct Reading Electrostatic/Electroscope Type Dosimeters

Standard Association of Australia （SAA）

AS 5013.1:2004 Food microbiology - Examination for specific organisms - Standard plate count

International Telecommunication Union (ITU)

ITU-T SERIES E.300 SUPP 5-1984 Modelling of an experimental test design for the determination of inexperienced user difficulties in setting up international calls using nationally available instructions, or to compare different sets of instructions
ITU-T P.75 SPANISH-1988 STANDARD CONDITIONING METHOD FOR HANDSETS WITH CARBON MICROPHONES
ITU-T P.75 FRENCH-1988 STANDARD CONDITIONING METHOD FOR HANDSETS WITH CARBON MICROPHONES

GSO

OS GSO IEC 62058-21:2012 ELECTRICITY METERING EQUIPMENT (AC) – ACCEPTANCE INSPECTION – Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2)

Japanese Industrial Standards Committee (JISC)

JIS Z 9003:1979 Single sampling inspection plans having desired operation characteristics by variables (standard deviation known)

European Committee for Electrotechnical Standardization（CENELEC）

EN 62058-21:2010 Electricity metering equipment (a.c.) - Acceptance inspection - Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2 and class indexes A and B)

PL-PKN

PN E06513-1987 Hlectricity meters Meters with maximum demand indicators Requirements and tests

Others: