Evaporate and burn

Evaporate and burn, Total:83 items.

The international standard classification for "Evaporate and burn" includes: Pigments and extenders , Non-metalliferous minerals , Components for conveyors , Organic chemicals in general , Industrial process measurement and control , Iron ores , Chemical reagents .

The Chinese standard classification for "Evaporate and burn" includes: Basic standard and general method for pigment , Metallurgical auxiliary material ore , Rubber tube, rubber belt and tape , Coal tar processed products , Industrial control and computer application equipment , Organic chemicals in general , Papermaking in general , Iron ore , Chemical reagent in general , Technical Management .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 5195.9-2016 Fluorspar--Determination of loss on ignition--Gravimetric method
GB/T 33329-2016 Pigments and extenders--Determination of ignition loss and residue on ignition

Professional Standard - Chemical Industry

HG/T 4732-2014 Burn resistant conveyor belts

未注明发布机构

DIN 54370 E:2019-12 Testing of pulp, paper and board - Determination of the residue on ignition
DIN 18128:1990 Soil - Investigation and testing - Determination of ignition loss

Group Standards of the People's Republic of China

T/CRIA 16008-2019 Burn resistant conveyor belts of steel wire netting construction

Professional Standard - Petrochemical Industry

SH/T 0129-1992 Test method for ignition residue of petroleum wax and malthenes

Professional Standard - Ferrous Metallurgy

YB/T 5082-2005 Determination of incandesed residue of crude phenol
YB/T 5082-2016 Crude phenol-The mothod for determination of residue after ignition

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9741-2008 Chemical reagent - General method for the determination of residue after ignition
GB/T 7531-2008 Determination of ignition residue for organic chemical products
GB/T 22877-2008 Paper,board and pulps—Determination of residue(ash)on ignition at 525 ℃
GB/T 10304.12-1988 Determination of ignition losses in cathode carbonate
GB/T 6730.68-2009 Iron ores—Determination of loss on ignition—Gravimetric method
GB/T 9489.10-1988 Method for determination of ignition loss of alundum powder
GB/Z 21193.3-2007 Fossil-fired steam power stations—Part 3:Steam-temperature controls

Professional Standard - Electron

SJ 3228.3-1989 Determination of loss on ignition in high purity arenaceous quartz

Taiwan Provincial Standard of the People's Republic of China

CNS 1537-1961 Aluminum Oxide (Ignited Aluminum Oxide)

Professional Standard - Electricity

DL/T 1151.4-2012 Analytical Methods of Scale and Corrosion Products in Power Plants - Part 4: Determination of the Loss (Increase) on Ignition

Professional Standard - Military and Civilian Products

WJ 49-2006 Test method for nitrocellulose ash ignition method

NL-NEN

NEN 6620-1986 Waste water and sludge Determination of the total residue on evaporation after drying and after ignition Gravimetric method
NEN 5931-1990 Aggregates for concrete - Determination of loss on ignition
NEN 2476-1988 Combustion products of solid mineral fuels Determination of loss on ignition of pulverized fuel ash and bottom-ash

Korean Agency for Technology and Standards (KATS)

KS P 3503-2023 Cryocautery tip
KS P 3503-2018 Cryocautery tip
KS P 3104-2018 Moxa cautery apparatus
KS P 3104-2021 Moxa cautery apparatus
KS M 5561-1982 Test methods for ignition residue in pigments
KS F 2104-2008 Testing method of organic matter in soils by ignition loss

CZ-CSN

CSN 06 1355-1985 Evaporating fuel oil burners
CSN ON 70 4033-1966 Steamed sugar beaker
CSN ON 70 4047-1966 distillation flask

American Society of Mechanical Engineers (ASME)

ASME PTC 4-2008 Fired Steam Generators
ASME PTC 4-2013 Fired Steam Generators
ASME PTC 4-1998 Fired steam generators
ASME PTC 4 Errata-2012 Fired Steam Generators; Errata

American National Standards Institute （ANSI)

ANSI/ASME PTC4-2013 Fired Steam Generators

SCC

CSA B140.1-1966(R2020) Vapourizing-Type Oil Burners
NS-EN 1:1980 Flued oil stove with vaporizing burners
NS-EN 1:1998 Flued oil stove with vaporizing burners
DIN 54370:2020 Testing of paper and board - Determination of the residue on ignition
BS ISO 1762:2001 Paper, board and pulps. Determination of residue (ash) on ignition at 525°C
VDI/VDE 3504-2003 Steam generator control — combustion chamber negative pressure control
BS ISO 2144:1997 Paper, board and pulps. Determination of residue (ash) on ignition at 900 °C
BS 571:1934 Distillation flasks

Military Standards (MIL-STD)

DOD A-A-51008-1985 CAUTERY, BATTERY OPERATED
DOD A-A-51009-1985 CAUTERY, OPHTHALMIC, BATTERY-OPERATED, LOW TEMPERATURE

German Institute for Standardization

DIN 53552:1977 Testing of Carbon Black; Determination of the Amount of Components of Carbon Black that are Volatile on Heating
DIN 18128:2002 Soil - Investigation and testing - Determination of ignition loss
DIN 54370:2020-08 Testing of paper and board - Determination of the residue on ignition
DIN 68861-6:1982 Furniture surface; behaviour at glowing cigarette
DIN 54370:1999 Testing of pulp, paper and board - Determination of the residue on ignition
DIN 54370:2007 Testing of paper and board - Determination of the residue on ignition
DIN 4733:1990-01 Oil fired bath water heaters with vaporizing burners
DIN 51961:1984 Testing of plastics surfaces; behaviour on exposure to glowing cigarettes

International Organization for Standardization (ISO)

ISO 745:1976 Sodium carbonate for industrial use; Determination of loss of mass and of non-volatile matter at 250 degrees C

American Society for Testing and Materials (ASTM)

ASTM E785-81(1996)e1 Standard Specification for Crucibles, Ignition, Laboratory, Metal
ASTM C774-88(1995) Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing
ASTM C774-88(2016) Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing
ASTM C774-88(2000) Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing
ASTM C774-88(2021) Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing
ASTM D7348-08e1 Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues
ASTM D7348-07 Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues

Danish Standards Foundation

DS/EN 1:1980 Flued oil stoves with vaporizing burners

AENOR

UNE 57050:2003 Paper, board and pulps. Determination of residue on ignition.

Association Francaise de Normalisation

NF E32-130:1984 Combustion steam generators. Test code.

Japanese Industrial Standards Committee (JISC)

JIS A 1226:2000 Test method for ignition loss of soils
JIS A 1226:2009 Test method for ignition loss of soils
JIS P 8251:2003 Paper, board and pulps -- Determination of residue (ash) on ignition at 525 degrees C
JIS P 8252:2003 Paper, board and pulps -- Determination of residue (ash) on ignition at 900 degrees C

GOST

GOST R 50332.13-1992 Alumina. Method for the determination of mass loss on ignition

RU-GOST R

GOST 29234.13-1991 Moulding sands. Method for determination of mass loss on ignition
GOST 12223.1-1976 Iridium. Gravimetric method for determination of mass loss on ignition

GSO

GSO ISO 2144:2015 Paper, board and pulps -- Determination of residue (ash) on ignition at 900 degrees C
OS GSO ISO 2144:2015 Paper, board and pulps -- Determination of residue (ash) on ignition at 900 degrees C
NB/SH/T 0953-2017 Determination of ignition loss of catalytic cracking catalyst
OS GSO ISO 1762:2015 Paper, board and pulps -- Determination of residue (ash) on ignition at 525 degrees C

VDI - Verein Deutscher Ingenieure

VDI/VDE 3504 Blatt 1-1989 Steam generator control - Furnace pressure control
VDI/VDE 3501-1962 Steam generator control; fuel and combustion air control system

SE-SIS

SIS SS 02 81 12-1983 Determination of suspended solids in waste water and their residue on ignition

American Society of Civil Engineers (ASCE)

ASCE MOP 70-2016 Evaporation, Evapotranspiration, and Irrigation Water Requirements (Second Edition)

International Electrotechnical Commission (IEC)

IEC TR 62140-3:2002 Fossil-fired steam power stations - Part 3: Steam-temperature control

VN-TCVN

TCVN 1864-2001 Paper board and pulp.Determination of residue(ash) on ignition at 900oC

Others: Solvents for paints and varnishes - rate of evaporation,Method for determination of evaporation loss of grease and lubricating oil,Spin dry and evaporate dry,evaporator and condenser,Evaporators and Distillers,Distillers and Evaporators,distillation and evaporation,UV detector and evaporative light,Ash and Ignition Test,distilled and evaporated,UV detectors and evaporative light detectors,Ignition method and gravimetric method,One effect evaporator and two effect evaporator