Cast iron m6 threaded bottom hole

Cast iron m6 threaded bottom hole, Total:247 items.

The international standard classification for "Cast iron m6 threaded bottom hole" includes: Screw threads in general , Flanges, couplings and joints .

The Chinese standard classification for "Cast iron m6 threaded bottom hole" includes: Measuring tool and instrument , Fasteners , Basic standards and general methods , Takeoff and landing devices , Measuring devices , Pipeline fittings .

Professional Standard - Aviation

HB 4540-1992 MJ Internal Thread Pin Type Double End Plain Plug Gauge MJ1.6~MJ3 for Series I Technical Bottom Holes
HB/Z 259-1994 Diameter and Deviation for Interference Thread Bottom Hole
HB 3896-1986 Regular Screw Thread Master Plug Gauge M6×0.5~M48×2 Master Through-Through ＴＴ
HB 8238-2002 Reduced hexagon acorn nuts with MJ thread
HB 3834-1986 Threaded hole lead hole punch
HB 3881-1986 Shell Gage Head Single End Go-side Plain Plug Gauge M42~M80 Used for Bottom Hole of Internal Screw Thread
HB 3889-1986 Regular Screw Thread Plug Gauge M6×0.5~M48×2
HB 3900-1986 Regular Screw Thread Master Plug Gauge M6×0.5~M48×2 Master Through-Dead TZ Master Through-Damage TS
HB 8239-2002 Insert acorn nuts with MJ thread
HB 1915-1975 Tapered thread taper hole reaming drill
HB 3874-1986 Internal Thread Cutting Process - Diameter and Deviation of Bottom Hole
HB 6222-1989 Deviation from basic dimensions of technical bottom hole for cutting out ＭＪinternal thread
HB 3884-1986 Non-holomorph Single End Go-side Plain Plug Gauge M82~M150 Used for Bottom Hole of Internal Screw Thread Process
HB 3875-1986 Pin Type Gauge Head Single End Go-side Plain Plug Gauge M1~M3 Used for Bottom Hole of Internal Screw Thread
HB 3878-1986 Taper End Gauge Head Single End Go-side Plain Plug Gauge M3.5~M40 Used for Bottom Hole of Internal Screw Thread Process

Professional Standard - Aerospace

QJ 379-1978 1:16 straight shank tapered pipe thread bottom hole reamer (1″/16~2″)
QJ 2920-1997 Forward Underport Diameter of MJ Internal Thread Tapping

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 8464-2008(英文版) Cast iron and copper valves with screwed connections
GB/T 17241.3-1998 Hubbed threaded cast iron pipe flanges

Group Standards of the People's Republic of China

T/TGZX 002-2024 Threaded ductile iron pipe fitttings
T/CNHA 1004-2017 Ductile iron screwed pipe fitting for fire and gas
T/SXZX 011-2023 Threaded ductile iron pipe fittings

Taiwan Provincial Standard of the People's Republic of China

CNS 211-1953 Diameters of Drill Heads (for Drilling Bolt Holes)
CNS 12851-1991 Nodular Graphite Iron Screwed Lift Check Valves(10 kgf/c㎡)
CNS 2943-1983 Screwed Type Malleable Cast Iron Pipe Fittings
CNS 12848-1991 Nodular Graphite Iron Screwed Globe Valves (10 kgf/c㎡)
CNS 4463-1978 Round Nut with Set Pin Holes Inside ISO Metric Fine Thread

机械工业部

JB/T 5975.2-1992 PN2.5MPa malleable cast iron pipe flange with neck thread
JB/T 5975.1-1992 PN1.0,1.6MPa malleable cast iron pipe flange with neck thread

未注明发布机构

DIN 3352-4 Cast iron gate valves with elastomeric obturator seatings and inside screw stem

American Society of Mechanical Engineers (ASME)

ASME B16.4-1992 Gray iron threaded fittings
ASME B16.12-1971 Cast Iron Threaded Drainage Fittings
ASME B16.12-2009 Cast Iron Threaded Drainage Fittings
ASME B16.12-1977 Cast Iron Threaded Drainage Fittings
ASME B16.12-1965 Cast Iron Threaded Drainage Fittings
ASME B16.12-1983 Cast Iron Threaded Drainage Fittings
ASME B16.12-2019 Cast Iron Threaded Drainage Fittings
ASME B16.12-1998 Cast iron threaded drainage fittings
ASME B16.12-1991 Cast iron threaded drainage fittings
ASME B16.39-1986 Malleable iron threaded pipe unions
ASME B16.4-2006 Gray Iron Threaded Fittings Classes 125 and 250
ASME B16.4-2011 Gray Iron Threaded Fittings: Classes 125 and 250
ASME B16.3-1985 Malleable Iron Threaded Fittings: Classes 150 and 300
ASME B16.3-1971 Malleable Iron Threaded Fittings: Classes 150 and 300
ASME B16.3-2006 Malleable Iron Threaded Fittings: Classes 150 and 300
ASME B16.3-1977 Malleable Iron Threaded Fittings: Classes 150 and 300
ASME B16.3-1963 Malleable Iron Threaded Fittings: Classes 150 and 300
ASME B16.39-2014 Malleable Iron Threaded Pipe Unions Classes 150@ 250@ and 300
ASME B16.39-2009 Malleable Iron Threaded Pipe Unions: Classes 150, 250, and 300
ASME B16.39-1977 Malleable Iron Threaded Pipe Unions: Classes 150, 250, and 300
ASME B16.3-2011 Malleable Iron Threaded Fittings: Classes 150 and 300
ASME B16.3-2016 Malleable Iron Threaded Fittings Classes 150 and 300
ASME B16.15-1985 Cast bronze threaded fittings

SCC

ASME B16.12-1998(R2006) Cast Iron Threaded Drainage Fittings
ASME B16.12-2009(R2014) Cast Iron Threaded Drainage Fittings
NS-EN 10242:1994 Threaded pipe fitting in malleable cast iron
AS 3673:1989 Malleable cast iron threaded pipe fittings
DANSK DS/EN 10242/A1+AC:2000 Threaded pipe fitting in malleable cast iron
DANSK DS/EN 10242:1995 Threaded pipe fitting in malleable cast iron
AENOR UNE-EN 10242:1995 THREADED PIPE FITTING IN MALLEABLE CAST IRON.
ASME B16.3-1998(R2006) Malleable Iron Threaded Fittings
CSA B131.17-1976 Flanged Cast Iron and Ductile Iron Pipe with Threaded Flanges
DIN EN 10242 E:2023 Draft Document - Threaded pipe fittings in malleable cast iron; German and English version prEN 10242:2023
BS 143:1938 Malleable cast iron and cast copper alloy pipe fittings (screwed b.s.p. taper thread) for steam, water, gas and oil
BS 143:1952 Malleable cast iron and cast copper alloy for steam, air, water, gas and oil screwed b.s.p. taper thread or API line pipe thread
NS 1075:1970 Thread runouts (vanish thread) and undercuts; metric threads
BS 1247:1955 Manhole step irons (malleable cast iron)
AWWA C115-1999 Standard for Flanged Ductile-Iron Pipe With Threaded Flanges
AENOR UNE 26129:1957 THREADED BUSHINGS FOR BLIND AND THROUGH HOLES. THREAD TOLERANCES
BS 1256:1945 Malleable cast iron (whiteheart process) and cast copper alloy pipe fittings for steam, air, water, gas and oil. Screwed b.s.p. taper male thread and parallel female thread
ASME B16.15-1985(R1994) Cast Bronze Threaded Fittings
BS 1936-2:1970 Specification for undercuts and runouts for screw threads.-ISO metric screw threads

GSO

BH GSO EN 10242:2022 Threaded pipe fitting in malleable cast iron
GSO EN 10242:2021 Threaded pipe fitting in malleable cast iron
BH GSO ISO 4755:2017 Fasteners -- Thread undercuts for external metric ISO threads

Lithuanian Standards Office

LST EN 10242+A1+AC-2001/A2-2003 Threaded pipe fittings in malleable cast iron
LST EN 10242+A1+AC-2001 Threaded pipe fitting in malleable cast iron

German Institute for Standardization

DIN EN 10242:2023-08 Threaded pipe fittings in malleable cast iron; German and English version prEN 10242:2023 / Note: Date of issue 2023-07-21*Intended as replacement for DIN EN 10242 (1995-03).
DIN EN 10242:1995-03 Threaded pipe fittings in malleable cast iron; German version EN 10242:1994 / Note: To be replaced by DIN EN 10242 (2022-06).
DIN EN 10242:2023 Threaded pipe fittings in malleable cast iron; German and English version prEN 10242:2023
DIN EN 10242/A2:2003-06 Threaded pipe fitting in malleable cast iron; Amendment A2; German version EN 10242:1994/A2:2003
DIN EN 10242/A1:1999-06 Threaded pipe fitting in malleable cast iron; Amendment A1; German version EN 10242:1994/A1:1999
DIN EN 10242:2022 Threaded pipe fitting in malleable cast iron; German and English version prEN 10242:2022
DIN EN 10242:1995 Threaded pipe fittings in malleable cast iron; German version EN 10242:1994
DIN EN 10242/A2:2003 Threaded pipe fitting in malleable cast iron; Amendment A2; German version EN 10242:1994/A2:2003
DIN EN 10242/A1:1999 Threaded pipe fitting in malleable cast iron; Amendment A1; German version EN 10242:1994/A1:1999
DIN 3352-4:1986 Cast iron gate valves with elastomeric obturator seatings and inside screw stem
DIN 28601:2000-06 Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings
DIN 2174:1998 Cold-forming taps for ISO metric coarse pitch thread M2 to M16 and ISO metric fine pitch thread M3 × 0,25 to M24 × 2 - Dimensions
DIN 76-2:1984-12 Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1

Danish Standards Foundation

DS/EN 10242:1996 Threaded pipe fitting in malleable cast iron
DS/EN 10242/A2:2003 Threaded pipe fittings in malleable cast iron
DS/EN 10242/A1+AC:2000 Threaded pipe fitting in malleable cast iron
DS 44:1967 Internal thread runout and undercut. ISO metric thread

Association Francaise de Normalisation

NF EN 10242/A1:1999 Threaded Malleable Iron Pipe Fittings
NF EN 10242:1995 Threaded Malleable Iron Pipe Fittings
NF EN 10242/A2:2004 Threaded Malleable Iron Pipe Fittings
NF E29-801/A2*NF EN 10242/A2:2004 Threaded pipe fittings in malleable cast iron.
NF E29-801*NF EN 10242:1995 Threaded pipe fitting in malleable cast iron.
NF F01-015/AM1:1977 RAILWAY TRANSPORT EQUIPMENT. UNBORED AXLES WITH GROOVED SCREW-ENDS. GROOVED SCREW-ENDS.
NF L22-209:1984 Bolt, hexagonal head, with locking hole threaded to head. ISO thread.
NF L22-296:1979 Slotted and drilled cheese head screws, fully threaded. ISO thread.
NF L22-202:1984 Bolt, hexagonal head, short thread, close tolerance with locking hole. ISO thread.
NF F01-088:1971 Railway transport equipment. Unbored axles with slotted and threaded ends. Screws with drilled heads.
NF F01-016:1971 Railway transport equipment. Unbored axles with threaded and slotted ends. Nuts.

BE-NBN

NBN 72-1957 Threaded fittings, malleable iron
NBN E 66-101-1973 The diameter of the drill for the front screw hole. ISO metric triangle thread and pipe thread
NBN 724 F-1967 Threaded screw through hole. Metric ISO

AENOR

UNE-EN 10242/A2:2004 Threaded pipe fittings in malleable cast iron
UNE-EN 10242:1995 THREADED PIPE FITTING IN MALLEABLE CAST IRON.
UNE-EN 10242/1M:1999 THREADED PIPE FITTING IN MALLEABLE CAST IRON
UNE 17020:1957 CUT THREADED SCREWS. HOLE DIAMETER.

American National Standards Institute （ANSI)

ANSI/ASME B16.12-2009 Cast Iron Threaded Drainage Fittings
ANSI/ASME B16.3-2011 Malleable Iron Threaded Fittings - Classes 150 and 300
ANSI/AWWA C115/A21.15-2011 Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded Flanges

Korean Agency for Technology and Standards (KATS)

KS B ISO 49-2003(2008) Malleable cast iron fittings threaded to ISO 7－1
KS B 1531-1982 Screwed type malleable cast iron pipe fittings
KS B 1531-2016 Screwed type malleable cast iron pipe fittings
KS B 1531-1997 Screwed type malleable cast iron pipe fittings
KS B 2356-2013 Malleable iron 10 K screwed valves
KS B ISO 49:2003 Malleable cast iron fittings threaded to ISO 7-1
KS B 2356-2003 Malleable iron 10 K screwed valves
KS B 1531-2019 Screwed type malleable cast iron pipe fittings
KS B ISO 49:2013 Malleable cast iron fittings threaded to ISO 7－1
KS B 2357-1986 MALLEABLE IRON CASTINGS 10 KGF/CM2 screw threads assemblies flanged gate valves
KS B ISO 49-2013 Malleable cast iron fittings threaded to ISO 7－1
KS B 2353-1986 Gray cast iron 10 KGF/CM2 flanged internal screw threads gate valves
KS V 7386-1998 Marine cast iron 10K THREAD LOCKING type Check ANGLE VALVES
KS B 2354-1986 Gray cast iron 10 KGF/CM2 flanged external screw threads gate valves
KS V 7364-1998 Marine cast iron 5Kgf/㎠ THREAD LOCKING type Check ANGLE VALVES
KS B 2358-1986 MALLEABLE IRON CASTINGS 10 KGF/CM2 screw threads assemblies lift check gate valves
KS B 0245-2022 Thread Run-Outs and Thread Undercuts for External Threaded Fasteners
KS V 7363-1998 Marine cast iron 5K THREAD LOCKING type Check Globe Valve
KS V 7388-1998 Marine cast iron 16KGF/CM2 THREAD LOCKING type Check ANGLE VALVES
KS V 7385-1998 Marine cast iron 10K THREAD LOCKING type Check Globe Valve
KS B 1006-1975 Hole Sizes Before Threading
KS V 7387-1998 Marine cast iron 10KGF/CM2 THREAD LOCKING type Check Globe Valve
KS B 1008-2008(2018) Split pin holes and wire holes for bolts, screws and studs
KS B 0244-1987 Radii Under the Head for External Threaded Fasteners
KS B 1060-2015 Self drilling tapping screws
KS B 1060-2008 Self drilling tapping screws
KS B 1006-2016 Hole Sizes Before Threading
KS B 1006-2016(2021) Hole Sizes Before Threading

European Committee for Standardization (CEN)

prEN 20049-1-1991 Malleable cast iron threaded pipe fittings; part 1: fittings with parallel internal and taper external threads in accordance with ISO 7-1
EN 10242:1995 Threaded pipe fittings in malleable cast iron Ratified European Text
EN 10242:1994/A2:2003 Threaded pipe fittings in malleable cast iron Ratified European Text
EN 10242:1995/AC1:1999 Threaded Pipe Fittings in Malleable Cast Iron Ratified European Text; A1-Corrigendum August 5, 1999

TH-TISI

TIS 249-1997 Malleable cast iron threaded pipe fittings
TIS 249-1977(en) THAI INDUSTRIAL STANDARD FOR MALLEABLE CAST IRON SCREWED PIPE FITTINGS

BR-ABNT

ABNT PB-16-1965 Malleable iron flange, threaded
ABNT P-PB-50-1964 Narrow threaded bolt through hole

Japanese Industrial Standards Committee (JISC)

JIS B 2051:1994 Malleable iron 10 K screwed valves
JIS B 2301:2004 Screwed type malleable cast iron pipe fittings
JIS B 2301:1999 Screwed type malleable cast iron pipe fittings
JIS B 2301:2013 Screwed type malleable cast iron pipe fittings
JIS B 2301 ERRATUM 1:2001 Screwed type malleable cast iron pipe fittings (Erratum 1)
JIS B 2301 AMD 1:2001 Screwed type malleable cast iron pipe fittings (Amendment 1)
JIS B 1004:1975 Hole sizes before threading

American Water Works Association (AWWA)

AWWA C115/A21.15-2011 Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges
AWWA C115/A21.15-1999 Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded Flanges
ANSI/AWWA C115/A21.15-2020 Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded Flanges

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry.

SP-70-1990 Cast Iron Gate Valves@ Flanged and Threaded Ends
SP-70-1998 Cast Iron Gate Valves@ Flanged and Threaded Ends
SP-78-1987 Cast Iron Plug Valves@ Flanged and Threaded Ends
SP-70-2006 Gray Iron Gate Valves Flanged and Threaded Ends
SP-78-1998 Cast Iron Plug Valves@ Flanged and Threaded Ends
SP-78A-2005 Gray Iron Plug Valves Flanged and Threaded Ends
SP-85-1994 Cast Iron Globe & Angle Valves Flanged and Threaded Ends
SP-71-1990 Cast Iron Swing Check Valves@ Flanges and Threaded Ends
SP-71-1997 Gray Iron Swing Check Valves@ Flanged and Threaded Ends
SP-71-2005 Gray Iron Swing Check Valves@ Flanged and Threaded Ends
SP-71-2018 Gray Iron Swing Check Valves@ Flanged and Threaded Ends
SP-85-2002 Gray Iron Globe & Angle Valves@ Flanged and Threaded Ends
SP-85-2011 Gray Iron Globe and Angle Valves@ Flanged and Threaded Ends

RO-ASRO

STAS 7709-1983 Malleable cast iron pipe fitings THREAD LENGTHS
STAS 485-1990 Malleable cast iron fittings threaded NUTS Main dimensions
STAS 478-1984 Malleable cast iron pipe fittings HEXAGON XIPPLES Dimcnsions
STAS 3336-1981 clearance molivs for tmri-:aded fasteners
STAS 482-1990 Threaded malleable cast iron fittings UNION AND UNION ELBOWS Main dimensions

YU-JUS

JUS M.B1.264-1980 Studsfor ?ast iron, productgrade A, fine screw threads
JUS M.B1.261-1980 Studsfor ?ast iron, product grade A, coarse screw threads
JUS M.C5.645-1989 ?ast iron gate valves with metallic seat and inside screwe? stem
JUS M.C5.646-1989 ?ast iron gate valves with metallic seat and outside scrawe? stem

British Standards Institution (BSI)

BS 143 and 1256:2000 Threaded pipe fittings in malleable cast iron and cast copper alloy
23/30479105 DC BS EN 10242. Threaded pipe fittings in malleable cast iron
BS EN 10242:1995(2003) Threaded pipe fittings in malleable cast iron
22/30448505 DC BS EN 10242. Threaded pipe fitting in malleable cast iron
BS EN 10242:1995 Threaded pipe fittings in malleable cast iron
ASME B16.4-2016 Gray Iron Threaded Fittings: Classes 125 and 150
BS 1157:1975 Recommendations for tapping drill sizes for use with fluted taps
17/30344317 DC BS ISO 49 AMD1. Malleable cast iron fittings threaded to ISO 7-1
BS 1936-1:1952(2007) Specification Undercuts & runouts for screw threads — Part 1 : Inch screw threads

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS)

MSS SP-70-1998 Cast lron gate valves flanged and threaded ends
MSS SP-70-2006 Gray Iron Gate Valves Flanged and Threaded Ends
MSS SP-78A-2005 Gray Iron Plug Valves Flanged and Threaded Ends
MSS SP-78-1998 Cast lron plug valves flanged and threaded ends
MSS SP-71-2005 Gray Iron Swing Check Valves, Flanged and Threaded Ends
MSS SP-85-2002 Gray Iron Globe& Angle Valves, Flanged and Threaded Ends
MSS SP-71-1997 Gray lron swing check calves, flanged and threaded eands
MSS SP-71-2011 Gray Iron Swing Check Valves, Flanged and Threaded Ends (Incorporates Errata: February 22, 2013)

IT-UNI

UNI 2349-1943 Closure bolt for casting holes. Metric thread type
UNI 2350-1943 Closure bolt for casting holes. With gas pipe thread type
UNI 2351-1943 Slotted closing plug for casting holes. With metric thread
UNI 2352-1943 Slotted closing plug for casting holes. With gas pipe thread type
UNI 2948-1971 Elongated hole lift screw with threaded hole. ISO coarse and fine pitch metric threads
UNI 7284-1974 Tapered studs with threaded holes
UNI 3221-1952 For 60° center holes with threaded base machined using lathes, replaces UNI 429

International Organization for Standardization (ISO)

ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
ISO 49:1983 Malleable cast iron fittings threaded to ISO 7/1
ISO 49:1994/cor 1:1997 Malleable cast iron fittings threaded to ISO 7-1; Technical Corrigendum 1

Indonesia Standards

SNI 07-3007-1992 Cast phosphoric bronze

GM North America

GM GM6223M-1989 Scrap - Cast Iron Borings

AR-IRAM

IRAM 2551-1967 Series 10 Threaded Malleable Iron Pipe Fittings

SE-SIS

SIS SMS 1964-1976 Threaded blind holes. ISO metric screw threads. Coarse pitch
SIS SS 1964-1989 Threaded blind holes — ISO metric screw threads — Coarse pitch

AT-ON

ONORM M 2012-1983 Tapped holes and screwed plugs with metric pipe thread, fine, for pipe unions, jitüngs and screw plugs; design dimensions

CZ-CSN

CSN ON 81 3759-1966 The cast iron threading with centre outlet of the weft to the right. Dimensions
CSN 02 1176-1962 Studa cast iron
CSN 25 4128-1964 Limit thread calliper gauges. Metric thread M 3 to M 100
CSN 02 1940-1971 Turnbuckles with cast iron nuts

PL-PKN

PN BN 2211-15-1967 Steel manhole Dnom=500mm. With screw connections and oval base
PN H74153-1962 Cast iron pipes and special castings for pressure main liries with serewed-gland joint. ?iners
PN H74152-1962 Caat iron pipes and speolal castings for preaaure main lines with acrewed- gland joint. Glanda
PN H74167-1962 Cast iron speoial oastings for pressure main lines. Crosses with three sookets with serewed-gland joint

SAE - SAE International

SAE AS1508A-2019 Undercuts for Straight Screw Threads - Metric

Society of Automotive Engineers (SAE)

SAE MA1508-2018 Undercuts for Straight Screw Threads - Metric
SAE AS1508-2012 Undercuts for Straight Screw Threads - Metric
SAE RS-428-5-1955 RS428 Tapped Holes for Wire Thread Inserts, (B.A. B.S.F. B.S.W. Threads) – Unplated
SAE RS-429-4-1955 RS429 Tapped Holes for Wire Thread Inserts, (BSPF. Threads)-Unplated
SAE RS-430-5-1969 RS430 Tapped Holes for Wire Thread Inserts, (Unified Threads)-Unplated

VN-TCVN

TCVN 7705-2007 Malleable cast iron fittings threaded to ISO 7-1

RU-GOST R

GOST 10549-1980 Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers
GOST R ISO 5836-2006 Implants for surgery. Metalbone plates. Holes corresponding to screws with asymmetrical thread and spherical under-surface
GOST 8958-1975 Ductile iron fittings with parallel thread for pipelines. Double nipples. Basic dimensions

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NA 0243-1990 Insert, Sandwich Panel, Molded in, Blind Threaded, Self-Locking, Cres, Metric
AIA/NAS NA 0242-1990 Insert, Sandwich Panel, Molded in, Thru Threaded, Self-Locking, Cres, Metric

CH-SNV

VSM 18024-1971 Textiles — Tests for colour fastness Section E13: Colour fastness to acid-felting: Severe
SNV 24561-1957 The center hole of the threaded hole in the tool
SN 213 163-1979 Threaded hole. Metric ISO thread M 1 to M 100X6

CU-NC

NC 06-34-1968 Holes for metric thread
NC 09-06-1968 Die frameworks with gray-iron casting or steel cesting bases

IN-BIS

IS 1369-1982 Dimensions of screw thread runout and undercuts

NL-NEN

NEN 2316-1969 Stone bolts, expansion type. Metric screw thread. Grade g

Defense Logistics Agency

DLA AND10326 REV 1-1943 SELF TAPPING SCREWS-MACHINE SCREW THREAD (HOLE SIZES FOR)
DLA AND10326 REV 1 NOTICE 1-1997 SELF TAPPING SCREWS-MACHINE SCREW THREAD (HOLE SIZES FOR)

PT-IPQ

NP 2183-1986 tool. Cylindrical helical drilling for threaded holes

United States Navy

NAVY AN504 REV 6 REINST-1982 SCREW, TAPPING, THREAD CUTTING, ROUND HEAD, MACHINE SCREW THREAD

Others: m6 threaded bottom hole