Anion gap detection time

Anion gap detection time, Total:73 items.

The international standard classification for "Anion gap detection time" includes: Measurement of time, velocity, acceleration, angular velocity , Power stations in general .

The Chinese standard classification for "Anion gap detection time" includes: Technical Management , Time and Frequency Measurement , Electric power system , Highway vehicle servicing installation , Data encryption .

Professional Standard - Electron

SJ 443-1973 Method of measurement for cathode heating time of high-voltage rectifier tubes
SJ/Z 9010.8-1987 Measurements of electrical properties of electronic tubes and valves--Part 8: Measurement of cathode heating time and heater warm-up time
SJ 422-1973 Methods of measuremenet for cathode prehcating time of low noise travelling wave tubes
SJ 432-1973 Method of measurement for cathode preheating time of O-type backward-wave tubes
SJ 1393-1978 Methods of measurement for cathode preheating time of gas discharge noise tubes

Group Standards of the People's Republic of China

T/QGCML 3150-2024 Specification for gap detection of automobile steering gear assembly
T/QGCML 715-2023 Movable gap measuring block
T/CMA JD008-2019 Coast-down Time Testers
T/CSTM 00665-2023 Non-destructive testing—Electromagnetic method to test gaps between two metal pieces
T/ZBH 014-2021 Ionoplast interlayer
T/GDAQI 009-2019 Multi-function testing instrument for escalator safety clearance
T/CIET 031-2023 Fully automatic axial clearance detection equipment

Hunan Provincial Standard of the People's Republic of China

DB43/T 2553-2023 Technical specification for constant current charging time detection of lithium-ion battery clusters for power energy storage

National Metrological Verification Regulations of the People's Republic of China

JJG 601-2003 Verification Regulation of Time Interval Generator
JJG 238-1995 Verification Regulation of Digital Time Interval Measuring Instrument
JJG 953-2000 Precision Time Interval Meter
JJG 723-1991 Verification Regulation of Time Interval Generator
JJG 237-1995 Verification Regulation of Time Interval Measuring Instrument with Needle Indication
JJG 238-2018 Time Interval Meters
JJG(邮电) 034-1995 Verification Regulation of Precision Time Interval Meter
JJG 723-2008 Verification Regulation of Time Interval Generator
JJG 601-2022 Time Calibrators

Professional Standard - Electricity

DL/T 415-2009 Check and measure device of spark gap for live working
DL 415-1991 Check and Measure Device of Spark Gap for Live Working

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 26866-2022 Testing specifications of power time synchronism systems
GB/T 16904.2-2006(英文版) Checking of rolling stock clearance for standard gauge railways—Part 2:Clearance treadle

Professional Standard - Medicine

YY/T 1156-2009 Thrombin time reagent(Kit)
YY/T 1158-2009 Prothrombin time reagent(Kit)

Military Standard of the People's Republic of China-General Armament Department

GJB 3674.5-2000 Fuze Inspection and Acceptance Rules Electronic Time Fuze

Professional Standard - Nuclear Industry

EJ/T 1092-1999 Determination of gaps between uranium dioxide pellets in fuel rod by γ-ray transmission method

National Metrological Technical Specifications of the People's Republic of China

JJF 1360-2012 Calibration Specification for Coast-down Time Testers

Professional Standard - Traffic

JT/T 633-2005 Automotive suspension and steering clearance tester

Professional Standard - Password Professional Standards

GM/T 0123-2022 Cryptography test specification for time stamp server

Korean Agency for Technology and Standards (KATS)

KS B 0432-1973(2009) Removal in Grindings

YU-JUS

JUS N.R1.108-1977 Electronic tubes. Measurements of the electrical properties. Measurement of cathode heating time and heater warm-up time
JUS G.S0.049-1990 Rubber, vulcanized. Time-interval between vulcanization and testing. Specification
JUS N.K0.010-1979 Low-voltage controlgear. Clearences and creepage distances

RU-GOST R

GOST 21011.5-1978 High-voltage kenotrons. Methods of measurement of cathode heatting time and readiness time controlling
GOST 19438.17-1977 Low-power electronic tubes and valves. Methods of measurement of cathode heating time and readiness time

International Electrotechnical Commission (IEC)

IEC 60151-8:1966/COR1:1967 Measurements of the electrical properties of electronic tubes. Part 8 : Measurement of cathode heating time and heater warm-up time; Corrigendum 1
IEC 60151-8:1966 Measurements of the electrical properties of electronic tubes. Part 8 : Measurement of cathode heating time and heater warm-up time

TR-TSE

TS 2448-1976 Measurements of The Electr?cal Propert?es of Electronic Tubes And Valves Part 8: Measurement of Cathode Heatmg Time And Heater Warm - Up Time
TS 1057-1972 CREEPAGE DISTANCES AND CLEARANCES ?N AIR

GSO

OS GSO IEC 60151-8:2014 Measurements of the electrical properties of electronic tubes and valves - Part 8: Measurement of cathode heating time and heater warm-up time
BH GSO IEC 60151-8:2016 Measurements of the electrical properties of electronic tubes and valves - Part 8: Measurement of cathode heating time and heater warm-up time
GSO IEC 60151-8:2014 Measurements of the electrical properties of electronic tubes and valves - Part 8: Measurement of cathode heating time and heater warm-up time

CZ-CSN

CSN 34 0130-1970 Creepage distances and clearances
CSN 65 6260-1985 Determination of gas bubble eparation tíme of petroleum ils
CSN 66 8226-1976 The delay time test of electrical detonators

SCC

AWWA WQTC50450 Interlaboratory Validation of an Ion Chromatographic Method for the Analysis of DBP Anions in Drinking Water
MIL MIL-DTL-32264A-2008 Fuze, Artillery, Electronic Time, M762A1 and Fuze, Electronic Time, M767A1 Less Booster

United States Navy

NAVY MIL-C-24189-1965 COUNTER-TIMER, ELECTRONIC, LOW FREQUENCY
NAVY MIL-C-24189 (2)-1966 COUNTER-TIMER, ELECTRONIC, LOW FREQUENCY

AENOR

UNE 68065:1983 AGRICULTURAL WHEELED TRACTORS. GROUND CLEARANCE

German Institute for Standardization

DIN 54402:1985 Testing of ion exchangers; determination of the total capacity of anion exchangers

ES-AENOR

UNE 52 003 Determination of working time, standard time and time types

Standard Association of Australia （SAA）

AS/NZS 4024.1803:2014 Mechanical safety safety distance and safety gap are the minimum gaps to prevent crushing of human body parts
AS 4024.1803:2006 Safety of machinery - Safety distances and safety gaps - Minimum gaps to prevent crushing of parts of the human body
AS/NZS 4024.1803:2019 Safety of machinery, Part 1803: Safety distances and safety gaps — Minimum gaps to prevent crushing of parts of the human body

ZA-SANS

SANS 1795-3:2007 Road traffic law enforcement systems Part 3: Distance-over-time speed measuring equipment (fixed distance/variable time)
SANS 1795-4:2007 Road traffic law enforcement systems Part 4: Distance-over-time speed measuring equipment (variable distance/variable time)

RO-ASRO

STAS 9475/9-1984 ION EXCHANGERS Determination of total capacity of anion exchangers

British Standards Institution (BSI)

BS EN 13160-7:2016 Leak detection systems. Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets

Japanese Industrial Standards Committee (JISC)

JIS K 0556:1995 Testing methods for determination of anions in highly purified water

HU-MSZT

MSZ 18091/19-1981 Anti-corrosion material detection, holding time
MSZ 9650/19.lap-1965 Paint testing. Drying time and drying process detection
MSZ 9634-1957 Oil, paint, glaze drying time detection

Society of Automotive Engineers (SAE)

SAE J1214-1992 Tire to Body Clearance Check for Recreational Vehicles
SAE J1214-2002 Tire to Body Clearance Check for Recreational Vehicles

U.S. Military Regulations and Norms

ARMY MIL-DTL-32264 A VALID NOTICE 1-2013 Fuze, Artillery, Electronic Time, M762A1 and Fuze, Electronic Time, M767A1 Less Booster

GM Europe

GME GMI R-0-12-2007 Measurement of Vehicle Clearance Circle (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14545.)

SAE - SAE International

SAE J1214-1978 Tire to Body Clearance Check for Recreational Vehicles
SAE J1214-2014 Tire to Body Clearance Check for Recreational Vehicles

Others: