ECD detector calibration linearity

ECD detector calibration linearity, Total:115 items.

The international standard classification for "ECD detector calibration linearity" includes: Non-destructive testing , Mechanical testing of metals , Electricity. Magnetism. Electrical and magnetic measurements , Optics and optical measurements , Exploratory and extraction equipment , Equipment for petroleum and natural gas industries .

The Chinese standard classification for "ECD detector calibration linearity" includes: Basic standards and general methods , Force and deformation test instrument , Electromagnetic Measurement , Optical Measurement , Petroleum geology exploration , Petroleum exploration, development, gathering and transportation equipment in general .

Professional Standard - Water Conservancy

SL 144-1995（条文说明） Calibration (inspection) method of water environment testing instruments and test equipment
SL 144-1995 Check method of water environmental detecting instrument and experimental equipment

Professional Standard - Machinery

JB/T 12457-2015 Non-destructive testing instruments-Testing method of X-ray delector for circuit board detection

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 23909.2-2009 Non-destructive testing—Radioscopic testing—Part 2:Check of long term stability of imaging devices
GB/T 19800-2005 Non-destructive testing--Acoustic emission inspection--Primary calibration of transducers
GB/T 13634-2000 Calibration of force-proving instruments used for the verification of testing machines

Group Standards of the People's Republic of China

T/JAS 24-2024 Inspection body and laboratory-Spectification for Verification and Calibration of Instruments and Equipment
T/LZZLXH 063-2021 Internal Calibration Specifications for Inspection and Testing Laboratories

中国民用航空总局

MH/T 3002.3-1997 Aircraft non-destructive testing - radiographic inspection

National Metrological Technical Specifications of the People's Republic of China

JJF(纺织) 045-2006 Calibration specification for wire linear length measuring instrument
JJF 1973-2022 Calibration Specification for Performance Parameters of Mobile Bio-Detected Shelters
JJF(机械) 1016-2018 Calibration specification of ladder test block for radiographic inspection
JJF 1674-2017 Calibration Specification for Alarmer Detectors of Benzene
JJF(机械)1016-2018 Calibration specification of ladder test block for radiographic inspection

Professional Standard - Civil Aviation

MH/T 3009-2004 Nondestructive testing for aircraft - Radiographic testing

National Metrological Verification Regulations of the People's Republic of China

JJG 967-2015 Calibrators for Headlamp Tester of Motor Vehicle
JJG 169-1993 Verification Regulation of Instrument Transformer Test Set
JJG(机械) 77-1992 DSJ type timing checker verification regulations
JJG(轻工) 79-1991 Calibration rules for watch instrument calibrator
JJG 169-2010 Verification regulation of transformer test set
JJG 1001-2005 Verification Regulation of Calibrators for Near Headlamp Tester of Motor Vehicle

未注明发布机构

DIN IEC 61453:1999 Nuclear Instrumentation - Scintillation gamma ray detector systems for the assay of radionuclides - Calibration and functional checks

Professional Standard - Petroleum

SY/T 6639-2005 The calibration method of geophone tester
SY/T 6639-2012 Calibration Method for Geophone Tester
SY/T 7081-2016 Calibrating method for calibration device of geophone tester
SY 6639-2012 Geophone Tester Calibration Method
SY 7081-2016 Calibration method of calibration device of geophone tester

Hebei Provincial Standard of the People's Republic of China

DB13/T 5177-2020 Specifications for online calibration of elevator speed limiter

Yunnan Provincial Standard of the People's Republic of China

DB53/T 681-2015 Testing Laboratory Internal Calibration Specifications

Jiangsu Provincial Standard of the People's Republic of China

DB3204/T 1040-2022 Code of Integrity Behavior for Inspection, Testing, Verification and Calibration Institutions

British Standards Institution (BSI)

BS ISO 11843-5:2008 Capability of detection - Methodology in the linear and non-linear calibration cases
BS ISO 11843-5:2009 Capability of detection. Methodology in the linear and non-linear calibration cases
BS ISO 11843-2:2000 Capability of detection. Methodology in the linear calibration case
BS ISO 11843-5:2008+A1:2017 Capability of detection - Methodology in the linear and non-linear calibration cases
BS ISO TR 7066-1:1997 Assessment of uncertainty in calibration and use of flow measurement devices - Linear calibration relationships
BS EN 15742:2009 Animal feeding stuffs - Determination of OC-pesticides and PCBs by GC/ECD
BS ISO 11843-2:2000(2008) Capability of detection — Part 2 : Methodology in the linear calibration case
BS EN ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Test lenses for focimeters used for measuring spectacle lenses
BS EN 13068-1:2000 Non-destructive testing - Radioscopic testing - Quantitative measurement of imaging properties
BS ISO 18898:2012 Rubber. Calibration and verification of hardness testers

International Organization for Standardization (ISO)

ISO 11843-5:2008 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
ISO 11843-2:2000 Capability of detection - Part 2: Methodology in the linear calibration case
ISO 11843-5:2008/Amd 1:2017 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases; Amendment 1
ISO 10647:1996 Procedures for calibrating and determining the response of neutron-measuring devices used for radiation protection purposes
ISO 18898:2012 Rubber - Calibration and verification of hardness testers
ISO 18898:2016 Rubber - Calibration and verification of hardness testers
ISO 16526-2:2011 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method

Korean Agency for Technology and Standards (KATS)

KS Q ISO 11843-5-2023 Detection Capabilities Part 5: Methodology in Linear and Nonlinear Calibration Vessels
KS Q ISO 11843-5:2012 Capability of detection-Part 5:Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-2:2009 Capability of detection－Part 2：Methodology in the linear calibration case
KS B ISO 12713-2023 Non-destructive testing — Acoustic emission inspection — Primary calibration of transducers
KS B ISO 12714-2023 Non-destructive testing — Acoustic emission inspection — Secondary calibration of acoustic emission sensors
KS Q ISO 11843-5:2018 Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-2-2019 Capability of detection－Part 2：Methodology in the linear calibration case
KS Q ISO 11843-2-2009(2019) Capability of detection－Part 2：Methodology in the linear calibration case
KS B ISO 12713:2018 Non-destructive testing — Acoustic emission inspection — Primary calibration of transducers
KS M ISO 18898:2010 Rubber-Calibration and verification of hardness testers

Association Francaise de Normalisation

NF X06-048-5*NF ISO 11843-5:2008 Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases
NF ISO 11843-5:2008 Detection capability - Part 5: linear and non-linear calibration methodology
NF ISO 11843-5/A1:2017 Detection capability - Part 5: linear and non-linear calibration methodology - Amendment 1
NF X06-048-2*NF ISO 11843-2:2000 Capability of detection - Part 2 : methodology in the linear calibration case
NF X06-048-5/A1*NF ISO 11843-5/A1:2017 Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases - Amendment 1

RO-ASRO

STAS 7802/4-1979 CALIBRATING BLOCKS FOR VERIF YIND AND REGULATING OF FLAW DETECTORS Calibrating blocks type A3
STAS 7802/2-1979 CALIBRATING BLOCKS FOR VERIFYING AND REGULATING OF FLAW DETECTORS Calibrating blocks type Al
STAS 7802/3-1979 CALIBRATING BLOCKS FOR VERIFYING AND REGULATING OF FLAW DETECTORS Calibrating blocks type A2
STAS 7802/5-1979 CALIBRAT IN G BLOCKS FOR GHECK1NG AND REGULATING OF FLAW DETECTORS Calibrating blocks type A4

Japanese Industrial Standards Committee (JISC)

JIS Z 8462-5:2011 Capability of detection -- Part 5: Methodology in the linear and non-linear calibration cases
JIS Z 8462-2:2003 Capability of detection -- Part 2: Methodology in the linear calibration case
JIS B 7728:1997 Calibration of force-proving instruments used for the verification of uniaxial testing machines
JIS Z 4520:1979 Test procedures for germanium gamma-ray detectors

German Institute for Standardization

DIN IEC 61453:2008 Nuclear Instrumentation - Scintillation gamma ray detector systems for the assay of radionuclides - Calibration and functional checks (IEC 61453:2007)
DIN ISO 11843-2:2006 Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000; text in German, English)
DIN ISO 11843-5:2010-08 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases (ISO 11843-5:2008); Text in German and English
DIN 54141-2:1982 Non-destructive testing; Eddy current testing of pipes and tubes; Reference method for the determination and calibration of the properties of an eddy current testing system using concentric test coils
DIN ISO 11843-2 Berichtigung 1:2008-06 Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000), Corrigenda to DIN ISO 11843-2:2006-06 (ISO 11843-2:2000/Cor. 1:2007; text in German, English)

GSO

GSO ISO 13876:2015 Soil quality -- Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)
OS GSO ISO 12713:2013 Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers
BH GSO ISO 12713:2016 Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers
GSO ISO 12713:2013 Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers
GSO ISO 11843-2:2010 Capability of detection -- Part 2: Methodology in the linear calibration case
BH GSO ISO 12714:2016 Non-destructive testing -- Acoustic emission inspection -- Secondary calibration of acoustic emission sensors
GSO ISO 12714:2013 Non-destructive testing -- Acoustic emission inspection -- Secondary calibration of acoustic emission sensors
OS GSO ISO 11843-2:2010 Capability of detection -- Part 2: Methodology in the linear calibration case
OS GSO ISO 376:2016 Metallic materials -- Calibration of force-proving instruments used for the verification of uniaxial testing machines
BH GSO ISO 376:2017 Metallic materials -- Calibration of force-proving instruments used for the verification of uniaxial testing machines
GSO ISO 376:2016 Metallic materials -- Calibration of force-proving instruments used for the verification of uniaxial testing machines

International Electrotechnical Commission (IEC)

IEC 61453:2007 Nuclear instrumentation - Scintillation gamma ray detector systems for the assay of radionuclides - Calibration and routine tests

KR-KS

KS B ISO 12713-2018(2023) Non-destructive testing — Acoustic emission inspection — Primary calibration of transducers
KS Q ISO 11843-5-2018(2023) Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-5-2018 Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
KS B ISO 12713-2018 Non-destructive testing — Acoustic emission inspection — Primary calibration of transducers

ZA-SANS

SANS 11843-2:2009 Capability of detection Part 2: Methodology in the linear calibration case
SANS 11843-5:2009 Capability of detection Part 5: Methodology in the linear and non-linear calibration cases

AR-IRAM

IRAM 5032-1949 Calibrator length detection

SCC

AWWA QTC97094 On-Line Particle Counter Calibration and Performance Verification
DANSK DS/ISO 11843-5:2008 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
DANSK DS/ISO 11843-5/AMD 1:2008 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
07/30148930 DC BS ISO 11843-5. Capability of detection. Part 5. Methodology in the linear and non-linear calibration cases
DANSK DS/ISO 11843-2:2003 Capability of detection - Part 2: Methodology in the linear calibration case
ISO/IEC 17025:2017 Plus Redline General requirements for the competence of testing and calibration laboratories (includes Redline Version)
NS-EN 12223:1999 Non-destructive testing — Ultrasonic examination — Specification for calibration block No. 1
DIN ISO 11843-5 E:2009 Draft Document - Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases (ISO 11843-5:2008); Text in German and English
06/30137107 DC IEC 61453. Nuclear instrumentation. Scintillation gamma ray detector systems forthe assay of radionuclides. Calibration and routine tests
DANSK DS/EN 12223:2000 Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1

Danish Standards Foundation

DS/ISO 11843-5:2008 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
DS/ISO 11843-2/Corr. 1:2007 Capability of detection - Part 2: Methodology in the linear calibration case
DS/ISO 11843-2:2003 Capability of detection - Part 2: Methodology in the linear calibration case

American National Standards Institute （ANSI)

ANSI N42.13-2004 Calibration and Usage of "Dose Calibrator" Ionization Chambers for the Assay of Radionuclides

Society of Automotive Engineers (SAE)

SAE J3095-2023 Linear Impactor Calibration Procedure

SAE - SAE International

SAE J3095-2016 Linear Impactor Calibration Procedure

Standard Association of Australia （SAA）

ISO 11843-5:2008/Amd.1:2017 Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases AMENDMENT 1

RU-GOST R

GOST R ISO 11843-5-2012 Statistical methods. Capability of detection. Part 5. Methodology in the linear and non-linear calibration cases

American Society for Testing and Materials (ASTM)

ASTM E181-10 Standard Test Methods for Detector Calibration and Analysis of Radionuclides
ASTM E181-17 Standard Test Methods for Detector Calibration and Analysis of Radionuclides

DIN

DIN EN 12223:2000 Non-destructive testing - Ultrasonic examination - Specification for calibration block No 1

Others: