Gas phase temperature setting

Gas phase temperature setting, Total:84 items.

The international standard classification for "Gas phase temperature setting" includes: Other textile machinery , Electrical engineering in general .

The Chinese standard classification for "Gas phase temperature setting" includes: Electricity and automation control devices for textile machinery .

National Metrological Technical Specifications of the People's Republic of China

JJF(冀) 143-2018 Specification for inspection of gas meters with built-in temperature conversion device

Professional Standard - Meteorology

QX/T 91-2008 Observation methods of indoor microclimate. air temperature, relative humidity and indoor-outdoor-air temperature difference

中国气象局

QX/T 626-2021 Digitization of pressure , air temperature , relative humidity autographic records

未注明发布机构

DIN 50011-13:1979 Technical climatology; climate-test-devices; climatic parameter: air-humidity and air-temperature
DIN EN 257:1996 Mechanical thermostats for gas-burning appliances
AS 4628:2005/Amdt 1:2016 Pressure and temperature limit devices for use with gas burners
DIN 16196 E:2013-01 Dial indicating thermometers with electrical limit contact devices - Filled system thermometers and bimetallic thermometers
DIN EN 257 E:2008-08 Mechanical thermostats for gas-burning appliances

Professional Standard - Textile

FZ/T 99009-1993 Temperature circuit detection and control device for chemical fiber equipment
FZ 99009-1993 Temperature cyclic detection and control device for chemical fiber equipment

Professional Standard - Electricity

DL/T 2150-2020 Technical specification for operation temperature on-line monitoring device of substation equipment

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34662-2017 Electrotechnical equipment-Temperatures of touchable hot surfaces

Underwriters Laboratories (UL)

UL 1563-1996 Electric spas, equipment assemblies, and associated equipment
UL 1563-1992 Electric spas, equipment assemblies, and associated equipment

US-FCR

FCR COE ETN 80-7-1980 TEMPERATURE SETTINGS FOR COMMISSARIES

CL-INN

INDITECNOR 2.4-9ch-1948 relative temperature

GOST

GOST R 71142-2023 Cryogenic equipment. Cryogenic air separation plants and related equipment of the cryogenic equipment industry. Terms and definitions

German Institute for Standardization

DIN 50011-13:1991 Technical climatology; climate-test-devices; climatic parameter: air-humidity and air-temperature
DIN 16196:2015-03 Dial indicating thermometers with electrical limit contact devices - Filled system thermometers and bimetallic thermometers
DIN 16196:1991 Dial indicating thermometers with electrical limit contact devices; filled system thermometers and bimetallic-thermometers
DIN 16196:2015 Dial indicating thermometers with electrical limit contact devices - Filled system thermometers and bimetallic thermometers
DIN 16196:2013 Dial indicating thermometers with electrical limit contact devices - Filled system thermometers and bimetallic thermometers
DIN EN 12470-2:2009-11 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers; German version EN 12470-2:2000+A1:2009 / Note: DIN EN 12470-2 (2001-02) remains valid alongside this standard until 2010-03-21.
DIN EN 14597:2015-02 Temperature control devices and temperature limiters for heat generating systems; German version EN 14597:2012
DIN 43880:1988-12 Built-in equipment for electrical installations; overall dimensions and related mounting dimensions / Note: To be amended by DIN 43880/A1 (2006-01).

HU-MSZT

MSZ 11418/2-1982 Devices and Fuel Temperature Switchgear
MSZ 5200/2.lap-1957 Energy equipment testing site. Odor, temperature, content of substances in the air

CZ-CSN

CSN ON 73 5111-1967 Design Value of Relative Humidity and Temperature for Textile Operations

Standard Association of Australia （SAA）

AS 4628:2005 Pressure and temperature limit devices for use with gas burners
AS 3768:1990 Guide to the effects of temperature on electrical equipment
AS 3768:1990/Amdt 1:1995 A guide to the effects of temperature on electrical equipment
AS EN 12470.2:2004 Clinical thermometers - Phase change type (dot matrix) thermometers

RU-GOST R

GOST 4.156-1985 System of product-quality indices. Filled-system thermometers. Solid-expansion and bimetal thermometers and themperature controllers. Nomenclature of indices
GOST 27917-1988 Rotating electrical machines. Built in thermal protection. Thermal detector and control units used in thermal protection systems

SCC

BS EN 12470-2:2001 Clinical thermometers. Phase change type (dot matrix) thermometers
DIN 16196 E:2013 Draft Document - Dial indicating thermometers with electrical limit contact devices - Filled system thermometers and bimetallic-thermometers
VDI/VDE 3511 BLATT 4.6-2019 Technical temperature measurement — radiation thermometry — construction and use of calibration radiators
UNE-EN 12470-2:2001 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers.
NS-EN 12470-2:2000+A1:2009 Clinical thermometers — Part 2: Phase change type (dot matrix) thermometers
NS-EN 12470-2:2000 Clinical thermometers — Part 2: Phase change type (dot matrix) thermometers
AENOR UNE-EN 12470-2+A1:2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers
BS PD ISO/TR 27957:2008 Road vehicles. Temperature measurement in anthropomorphic test devices. Definition of the temperature sensor locations
NS-EN 14597:2005 Temperature control devices and temperature limiters for heat generating systems
DANSK DS/EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
UNE-EN 14597:2006 Temperature control devices and temperature limiters for heat generating systems
NS-EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
AENOR UNE-EN 14597:2014 Temperature control devices and temperature limiters for heat generating systems
AATCC 181-2004 Colorfastness to Light at High Temperatures: Daylight Temperature and Humidity Controlled Apparatus

IN-BIS

IS 9676-1980 Reference ambient temperature for electrical equipment
IS 3599-1966 Method for measuring the temperature of cooling medium in electrical equipment

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 4747-2005 Neural-Based Air-Handling Unit for Indoor Relative Humidity and Temperature Control

GSO

GSO OIML R7:2010 CLINICAL THERMOMETERS (mercury-in-glass, with maximum device)
GSO 665:1997 VERIFICATION METHOD OF CLINICAL THERMOMETERS (mercury-in-glass, with maximum device)
GSO IEC 117:2013 Electrotechnical equipment - Temperatures of touchable hot surfaces

International Organization for Standardization (ISO)

ISO 9492:1987 Bases for design of structures; Temperature climatic actions
ISO/TR 9492:1987 Bases for design of structures; Temperature climatic actions

Korean Agency for Technology and Standards (KATS)

KS B 5217-2020 Bimetallic thermometers for atmospheric temperature
KS I 2005-2005 Air quality-Determination of gaseous sulphur compounds in ambient air(Sampling equipment)
KS C 0076-1990(2017) Methods for determining distribution temperature and colour temperature or correlated co1our temperature of light sources
KS B 5235-2020 Vapour pressure thermometers

BE-NBN

NBN-ISO/TR 9492:1993 Bases for design of structures. Temperature climatic actions

Association Francaise de Normalisation

NF EN 12470-2/IN1:2009 Medical thermometers - Part 2: phase change thermometers (dot matrix)
NF EN 12470-2+A1:2009 Medical thermometers - Part 2: phase change thermometers (dot matrix)

American Society for Testing and Materials (ASTM)

ASTM E825-98 Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E825-98(2003) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E825-98(2009) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature

IT-UNI

UNI 5025-1962 Mechanical thermometer for ships. Thermometer dish configuration and thermometer regulations

VDI - Verein Deutscher Ingenieure

VDI/VDE 3511 BLATT 4.6-2017 Temperature measurement in industry - Radiation thermometry - Set-up and use of calibration radiators

RO-ASRO

STAS 10551-1976 UNSATURATED POLYESTER RESINS Determination of the maximum temperature and the rate of increase of temperature during the setting at 80°C

AENOR

UNE-EN 12470-2:2001+A1:2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers

Danish Standards Foundation

DS/EN 12470-2+A1:2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers

Lithuanian Standards Office

LST EN 12470-2-2002+A1-2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers

SAE - SAE International

SAE AMS4787D-1992 Gold-Nickel Alloy Brazing Filler Metal@ High Temperature 82Au - 18Ni 1740 Degrees F (949 Degrees C) Solidus- Liquidus Temperature
SAE AS428-1996 Exhaust Gas Temperature Instruments

British Standards Institution (BSI)

BS PD ISO/TR 27957:2020 Road vehicles. Temperature measurement in anthropomorphic test devices. Definition of the temperature sensor locations
PD ISO/TR 27957:2020 Road vehicles. Temperature measurement in anthropomorphic test devices. Definition of the temperature sensor locations

European Committee for Standardization (CEN)

EN 12470-2:2000+A1:2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers

PT-IPQ

NP 93-1956 Essential oils. Relevant freezing temperatures

United States Navy

NAVY MIL-T-2118 C-1990 TRAP, STEAM, ANGLE, THERMOSTATIC

Japanese Industrial Standards Committee (JISC)

JIS Z 8725:1987 Methods for determining distribution temperature and colour temperature or correlated colour temperature of light sources

U.S. Air Force

AIR FORCE QPL-9343-7-1997 INDICATOR, TEMPERATURE, THERMOCOUPLE, ENGINE EXHAUST, TYPE MJ-1

Conference of European Post Telecommunication (CEPT)

CEPT T/TR 02-06 E-1986 Environmental Conditions for Telecommunications Equipment at Weather- Protected Locations (Excluding Telecommunication Centres with Temperature and Humidity Controls) and in the Open Air

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 1-1969 GENERAL PRINCIPLES FOR TEMPERATURE LIMITS IN THE RATING OF ELECTRIC EQUIPMENT

Society of Automotive Engineers (SAE)

SAE AS428-2008 Exhaust Gas Temperature Instruments

Others: gas phase temperature,gas phase + temperature,gas phase temperature,The gas phase temperature is based on,temperature gas phase,Vapor deposition temperature,gas phase initial temperature