Can sci not be on pubpeer?

Can sci not be on pubpeer?, Total:163 items.

The international standard classification for "Can sci not be on pubpeer?" includes: Acoustics and acoustic measurements .

The Chinese standard classification for "Can sci not be on pubpeer?" includes: Electroacoustic device , Architectural engineering construction machinery .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 21936-2008 Earth-moving machinery - Machine-mounted retrieval device - Performance requirements
GB 11455-1989 Hearing aid equipment not entirely worn on the listener
GB/T 11455-1989 Hearing aid equipment not entirely worn on the listener

Taiwan Provincial Standard of the People's Republic of China

CNS 6135.3-2000 Hearing aid-Part3: Hearing aids equipment not entirely worn on the listener
CNS 6135-3-2000 Hearing aid-Part3: Hearing aids equipment not entirely worn on the listener

国家新闻出版广电总局

GY/T 304-2016 High-performance streaming audio-over-IP interoperability

Danish Standards Foundation

Glid ikke i bananskraellen-2011 Don't slip on the banana peel - Setting your company's risk tolerance levels
DS/IEC 118-3:1985 Hearing aids. Part 3: Hearing aids equipment not entirely worn on th listener

FI-SFS

SFS 4079-1977 Lifts are different from those in residential buildings. The machine room is built above the well. size

GM North America

GM6121M-2010 Performance Requirements for Labels Issue 6; Do Not Use on New Programs; Replaced by GMW14573
GMN6809-2010 Adhesion Performance for (High Performing) Inner Door Water Deflectors Issue 2; Do Not Use on New Programs; Replaced by GMW15523
GM3639M-2010 Performance Requirements of Structural Adhesives for Mental Bonding Issue 3; Do Not Use on New Programs; Replaced by GMW15200
GM4497M-2011 Exterior Plastic Painted Parts Performance Issue 7; Do Not Use on New Programs; Replaced by GMW14797
GM6124M-2011 Performance Requirements for Adhesive Coated Threaded Fasteners Issue 4; Do Not Use on New Programs; No Replacement
GM4718M-2010 Oil, Engine, ILSAC GF-4 High Performance Issue 6; Do Not Use on New Programs; Replaced by GMW15827
GM3640M-2010 Performance Requirements of Antiflutter Adhesives Issue 2; Do Not Use on New Programs; Replaced by GMW14874
GMN11280-2011 Performance Requirements of an Exterior Lighting Structural Adhesive Issue 2; Do Not Use on New Programs; Replaced by GMW16506
GM4383M-2010 Performance Specification for Non-Decorative Powder Coatings Issue 5; Do Not Use on New Programs; Replaced by GMW15645
GM6175M-2011 Performance Requirements for Adhesive Coated Threaded Fasteners Issue 11; Do Not Use on New Programs; Limited Use
GM3641M-2010 Performance Requirements Structural Adhesive Reinforcement Patch Issue 2; Do Not Use on New Programs; Replaced by GMW15286
GM GM9690P-2013 Evaluation of Paint, Sag, Pop and Strike-In Properties Issue 3; Do Not Use on New Programs; Replaced by GMW15119
GM9799P-2011 Smoke Test Issue 3; Do Not Use on New Programs; No Replacement
GMN11022-2010 Inmold Labels Issue 2; Do Not Use on New Programs; Replaced by GMW14573
GMP.ABS.001-2010 ABS ?General Purpose Issue 4; Do Not Use on New Programs; Replaced by GMW15572
GM9668P-2010 Test Method for Determination of the Drip Performance of Hot Melt Wax Issue 2; Do Not Use on New Programs; Replaced by GMW15289
GMP.ABS.014-2010 ABS - Heat Resistant Issue 2; Do Not Use on New Programs; Replaced by GMW15572
GM4298P-2010 Salt Spray Test Issue 16; Do Not Use on New Programs; Replaced by GMW3286
GM4357P-2010 Spot Test Etch Susceptibility of Stainless Steel Issue 5; Do Not Use on New Programs; Replaced by GMW15284
GM9749P-2010 Sag Resistance Issue 3; Do Not Use on New Programs; Replaced by SAE J243
GM GM7400M-2013 Plastic Parts Issue 11; Do Not Use on New Programs; Replaced by GMW17081
GM9674P-2011 Procedure to Verify That Heat Stakes Resist a Minimum Tensile Load Issue 2; Do Not Use on New Programs; No Replacement
GM4388M-2010 Exterior Paint Performance Requirements for Approval of New Plastic Materials Issue 6; Do Not Use on New Programs; Replaced by GMW16172
GM6419M-2011 Performance Requirements of Ultra High Molecular Weight Polyethylene (UHMW PE) Tape Issue 3; Do Not Use on New Programs; No Replacement
GM7001M-2011 Plastic Molding Compounds Issue 7; Do Not Use on New Programs; Replaced by GMW15702
GM6242M-2010 Labels, Secondary Surfaces Issue 7; Do Not Use on New Programs; Replaced by GMW14573
GM9659P-2010 Fuel Resistance Test Issue 2; Do Not Use on New Programs; Replaced by GMN11295
GMP.ABS.007-2010 ABS - Chrome Platable Grade Issue 3; Do Not Use on New Programs; Replaced by GMW15572
GMP.PC+S/MA.003-2011 PC+S/MA ?Medium Heat Resistant Issue 2; Do Not Use on New Programs; No Replacement
GM9797P-2011 Cleavage Peel Test Issue 3; Do Not Use on New Programs; No Replacement
GMN7313-2010 Exterior Label, for Non-Metallic and Low Surface Energy Materials Issue 2; Do Not Use on New Programs; Replaced by GMW14573
GM4465P-2010 Water Fog Humidity Test Issue 9; Do Not Use on New Programs; Replaced by GMW14729
GM4345M-2010 Corrosion Protective Coatings, Zinc Plating Issue 8; Do Not Use on New Programs; Replaced by GMW3044
GM2767M-2011 Non Woven Polyester - Underhood Issue 5; Do Not Use on New Programs; Replaced by GMW16522
GMP.PMMA.009-2010 Acrylic - Exterior Trim Issue 3; Do Not Use on New Programs; Replaced by GMW16335
GMP.ABS+PC.003-2010 ABS + Polycarbonate - Alloy Issue 3; Do Not Use on New Programs; Replaced by GMW15581
GM6039M-2011 Sealing Compound Coating for Screws Issue 6; Do Not Use on New Programs; No Replacement
GMP.PMMA.006-2010 Acrylic - Exterior Lens Issue 4; Do Not Use on New Programs; Replaced by GMW16335
GM3659M-2011 Label, Pressure Sensitive, Laser Markable, VIN Issue 4; Do Not Use on New Programs; No Replacement
GMN10057-2010 Labels for Parts and Component Identification Issue 2; Do Not Use on New Programs; Replaced by GMW14573
GM9751P-2011 Side Impact Test Issue 3; Do Not Use on New Programs; Replaced by ISO 11343
GM6243M-2010 Label, Pressure Sensitive, for Glass Issue 6; Do Not Use on New Programs; Replaced by GMW14573
GM9452P-2010 Test for Dimensional Stability Issue 5; Do Not Use on New Programs; Replaced by GMW4217
GM9511P-2010 Scab Corrosion Creepback of Paint Systems on Metal Substrates Issue 6; Do Not Use on New Programs; Replaced by GMW15288
GM273M-2011 Corrosion Protective Coating for Brake Rotors Issue 4; Do Not Use on New Programs; Replaced by GMW16284
GM9019P-2011 Test for Tack Range of Adhesives Issue 5; Do Not Use on New Programs; No Replacement
GM252M-2011 Coil Coated Adhesive - Sheet Stock Issue 2; Do Not Use on New Programs; No Replacement
GM6108M-2011 Compound, Thread Sealing, High Temperature Issue 3; Do Not Use on New Programs; No Replacement
GMP.EVOH.001-2011 Ethylene Vinyl Alcohol Copolymer Issue 2; Do Not Use on New Programs; Replaced by GMW15801
GM9195M-2011 Diesel Fuel Factory Fill, Grade No.2 Issue 2; Do Not Use on New Programs; No Replacement
GM6013M-2011 Requirements for Liquid Anaerobic Compounds Issue 8; Do Not Use on New Programs; No Replacement
GM7451M-2011 Interior Part Performance Requirements for Simple, Molded-in-Color Plastic Components Issue 7; Do Not Use on New Programs; Replaced by GMW14651
GM9102P-2010 Corrosion Creepback Test Method Issue 6; Do Not Use on New Programs; Replaced by GMW15282
GM GM4344M-2003 Corrosion Protective Coatings, Zinc Plating Scheduled for Deletion Don t Use on New Designs; Shown on GM4345M
GM4435M-2010 Protective Finishes - Phosphate Type Issue 4; Do Not Use on New Programs; Replaced by GMW3179
GMP.ABS.004-2010 ABS - Ultraviolet Light Stabilized, Low Gloss Issue 4; Do Not Use on New Programs; Replaced by GMW15572
GM GM222M-2012 Elastomeric Microcellular Polyurethane Foam Issue 3; Do Not Use on New Programs; No Replacement
GMP.PMMA.012-2010 Acrylic - Weather Resistant, Heat Resistant Issue 2; Do Not Use on New Programs; Replaced by GMW16335
GM9894P-2010 Freeze Characteristics of Weatherstrips Issue 5; Do Not Use on New Programs; Replaced by GMW15379
GMP.PVC.062-2011 PVC ?70 Shore A, Weatherable, Elastomeric Issue 2; Do Not Use on New Programs; Replaced by GMW16048
GM9901P-2011 Adhesive Sample Preparation for Metallic Substrates Issue 5; Do Not Use on New Programs; No Replacement
GM9904P-2011 Multi-Axial Impact Test Issue 4; Do Not Use on New Programs; Replaced by ASTM D3763 or ISO 6603
GMP.PVC.060-2011 PVC ?60 Shore A, Weatherable, Elastomeric Issue 2; Do Not Use on New Programs; Replaced by GMW16048

International Telecommunication Union (ITU)

ITU-R RAPPORT 1145 FRENCH-1990 PROPAGATION OVER IRREGULAR TERRAIN WITH AND WITHOUT VEGETATION PROPAGATION SUR UN TERRAIN IRREGULIER AVEC ET SANS VEGETATION
ITU-R INFORME 1145 SPANISH-1990 PROPAGATION OVER IRREGULAR TERRAIN WITH AND WITHOUT VEGETATION PROPAGACI覰 EN TERRENO IRREGULAR CON Y SIN VEGETACI覰
ITU-R REPORT 1145-1990 PROPAGATION OVER IRREGULAR TERRAIN WITH AND WITHOUT VEGETATION
ITU-T Y.3041-2013 Smart ubiquitous networks – Overview (Study Group 13)
ITU-T Y.3044-2013 Smart ubiquitous networks – Content awareness framework (Study Group 13)
ITU-T Y.3043-2013 Smart ubiquitous networks – Context awareness framework (Study Group 13)
ITU-T Y.3042-2013 Smart ubiquitous networks – Smart traffic control and resource management functions (Study Group 13)

SCC

AWWA WSP57731 You Don't Have to Gamble on Good Customer Service
AWWA IMTECH51432 What Won't Be on the Internet? An Integration Story
AENOR UNE 26357:1981 Confirmation of the possibility of running on slopes.
MIL MIL-M-43803-1972 MARKINGS, INKED OR PAINTED, OPAQUE, ON NONPOROUS SURFACES (NO S/S DOCUMENT)
AWWA WQTC65832 Predicting Adsorbability of Organic Compounds on Activated Carbon
JIS G 4331:2020 Chemically colored films formed on stainless steels -- Performance and test methods
DIN IEC 60118-3:1989 Hearing aids; hearing aid equipment not entirely worn on the listener; identical with IEC 60118-3:1983

GM Holden Ltd

HOLDEN HN 0037-2012 Resistance to Cold Cracking of Vinyl Coated Fabrics Do Not Use on New Programs, No Replacement. Limited for current use
HOLDEN HN 1308-2013 Durability Requirements for Stainless Steel Decorative Parts Do Not Use on New Programs, No Replacement.
HOLDEN HN 1325-2013 Grease Anti Seize Do Not Use on New Programs, No Replacement. Limited for current use

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

REPORT 1145-1990 PROPAGATION OVER IRREGULAR TERRAIN WITH AND WITHOUT VEGETATION
RAPPORT 1145 FRENCH-1990 PROPAGATION OVER IRREGULAR TERRAIN WITH AND WITHOUT VEGETATION
ITU-R BR.784 SPANISH-1992 INTERCAMBIO DE PROGRAMAS DE TELEVISI?N EN PEL?CULA DE 16 mm CON DOS PISTAS DE SONIDO S?NCRONAS EN SOPORTE SEPARADO

American Gear Manufacturers Association

AGMA 13FTM01-2013 Power Skiving of Cylindrical Gears on Different Machine Platforms

Standard Association of Australia （SAA）

AS 1088.3:1987 Hearing aids - Hearing aid equipment not entirely worn on the listener

AGMA - American Gear Manufacturers Association

13FTM01-2013 Power Skiving of Cylindrical Gears on Different Machine Platforms

GB-REG

REG NASA-LLIS-3636-2012 Lessons Learned ?Different Groups in Different Locations Working On the Same System but Under Different Contracts

U.S. Military Regulations and Norms

ARMY UFGS-26 32 33.00 10-2007 UNINTERRUPTIBLE POWER SUPPLY (UPS) SYSTEM ABOVE 15 KVA CAPACITY
ARMY MIL-HDBK-797-1994 POLYAMIDE (NYLON) PLASTICS: PROPERTIES, PROCESSING, PERFORMANCE, AND MILITARY APPLICATIONS

General Motors do Brasil

GMSA EMS.AI.0426-2011 Acoustical insulating plates 慞lacas isolantes ac鷖ticas Do Not use on New Programs; No Replacement
GMSA EMS 9309535-2011 Quick drying adhesive Adesivo de secagem r谩pida Do Not use on New Programs; No Replacement
GMSA EMS 0248-2011 Adhesion promoter conductive primer for polypropylene Primer promoter of conductive adhesion for polypropylene Revision A; Do Not use on New Programs; No Replacement
GMSA EMS 9309527-2011 Plastisol air drying Plastisol de secagem ao ar Do Not use on New Programs; No Replacement
GMSA EMS 9309548-2011 Anaerobic sealant compound Composto selador anaer贸bico Do Not use on New Programs; No Replacement
GMSA EMS 0373-2011 Material for non heat treated aluminum silicon cylinder head Material para cabe莽ote de alum铆nio n茫o tratado termicamente Revision A; Do Not use on New Programs; No Replacement
GMSA EMS.AI.0361-2011 Molded thermal - insulator Isolante t茅rmico moldado Do Not use on New Programs; No Replacement
GMSA EMS 9309581-2011 Anti Friction Coating Revestimento Anti-fric玢o Revision A; Do Not use on New Programs; No Replacement
GMSA EMS 9309573-2011 Shock absorber oil 脫leo para amortecedor Revision A; Do Not use on New Programs; No Replacement
GMSA EMS 9309546-2011 Anaerobic sealing compound Vedador anaer贸bico Do Not use on New Programs; No Replacement
GMSA EMS 374-2011 Gray cast iron alloy for application in brake discs Liga de ferro fundido five for application in brake discs Revision A; Do Not use on New Programs; No Replacement

CZ-CSN

CSN ON 28 0350-1967 Calculation of beams with openings in supports (external forces do not affect the openings)

American Society of Mechanical Engineers (ASME)

ASME A112.3.1-1993 Performance standard and installation procedures for stainless steel drainage systems for sanitary, storm, and chemical applications, above and below ground
ASME B56.11.6-1992 Evaluation of visibility form powered industrial trucks
ASME B56.6-2002 Safety Standard for Rough Terrain Forklift Trucks

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4143-1998 Introducing Building Energy Simulation Classes on the Web
ASHRAE LO-09-051-2009 Communication Performance of BACnet Web Service over the Global Internet
ASHRAE CI-01-10-1-2001 Results of the HERS BESTEST on an Energy Simulation Computer Program
ASHRAE AT-96-12-2-1996 Single-Tube Performance of Condensation of R-134a on Horizontal Enhanced Tubes
ASHRAE 3845-1995 Evaporation Heat Transfer Performance of Nozzle-Sprayed Ammonia on a Horizontal Tube
ASHRAE OR-16-C045-2016 Energy Use of Ground-Source Heat Pumps for Various Load Temperatures
ASHRAE 4024-1997 Effect of Noncondensable Gas on the Condensation of R-123 on Enhanced Tube Geometries (RP-676)

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications

CEPT T/R 21-06 E-1986 Conditions under Which Land Mobile Equipments May Be Carried but without Being Operated During Short Journeys and Stays within CEPT Countries

ESDU - Engineering Sciences Data Unit

ESDU 74041-1974 Example of the use of Data Items on range performance.
ESDU 73024 B-1980 PERFORMANCE OF CONICAL DIFFUSERS IN INCOMPRESSIBLE FLOW
ESDU 73024 C-2004 Performance of conical diffusers in incompressible flow.
ESDU 82007-2012 Structural Members: mean fluid forces on members of various cross sections
ESDU 75026-1975 PERFORMANCE OF CIRCULAR ANNULAR DIFFUSERS IN INCOMPRESSIBLE FLOW

National Aeronautics and Space Administration (NASA)

NASA-TN-D-2331-1964 Fatigue-crack propagation in several titanium and stainless-steel alloys and one superalloy
NASA NACA-TM-737-1934 Conversion of energy in cross-sectional divergences under different conditions of inflow

International Organization for Standardization (ISO)

ISO/R 169:1960 Sizes of photocopies (on paper) readable without optical devices
ISO 8987:1988 Plastics; phenolic resins; determination of reactivity on a B-transformation test plate

Association Francaise de Normalisation

NF T30-072:1981 Paints. Test of the behaviour of a paint under different temperature.
NF C93-025:1984 ELECTRONIC COMPONENTS. SOLDERLESS TERMINATION PRESS-IN CONNECTIONS FOR PRINTED CIRCUIT BOARDS.
NF EN 61669:2016 Electroacoustics - Measuring the acoustic performance characteristics of hearing aids on a real ear
NF E58-094*NF ISO 10532:2009 Earth-moving machinery - Machine-mounted retrieval device - Performance requirements
NF P20-514:1985 METHODS OF TESTING DOORS. BEHAVIOUR OF DOOR LEAVES PLACED BETWEEN TWO DIFFERENT CLIMATES. (EUROPEAN STANDARD EN 79).

(U.S.) Ford Automotive Standards

FORD WSS-M99P41-A11-2014 LABEL PERFORMANCE, SEWN IN ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M99P41-A10)
FORD WSS-M98P14-A9-2021 PERFORMANCE OF UREA SCR MATERIALS (Shown on FORD WSS-M98P14-A1)

European Committee for Electrotechnical Standardization（CENELEC）

HD 450.3-1984 Hearing Aids Part 3: Hearing Aids Equipment Not Entirely Worn on the Listener

International Electrotechnical Commission (IEC)

IEC 60118-3:1983 Hearing aids. Part 3 : Hearing aid equipment not entirely worn on the listener

ES-AENOR

UNE 28-578-1986 Unbreathable compressed air used in aircraft

Korean Agency for Technology and Standards (KATS)

KS C IEC 60118-3:2001 Hearing aids－Part 3：Hearing aid equipment not entirely worn on the listener

HU-MSZT

MI 18795-1981 Equipment cannot be assembled in the factory and must be transported without damage

European Telecommunications Standards Institute (ETSI)

ETSI PRETS 300 740-1996 Satellite Earth Stations and Systems (SES); Maritime Mobile Earth Stations (MMES) Operating in the 1,5/1,6 GHz Bands Providing Low Bit Rate Data Communications (LBRDC) in the Maritime Mobile Satellite Service (MMSS), not Intended for Distress and Safety

European Committee for Standardization (CEN)

HD 450.3 S1-1984 Hearing aids; part 3: hearing aids equipment not entirely worn on the listener

GM Daewoo

GMKOREA EDS-M-8774-2015 2C1B 우레탄 투톤 상도도료 (Version 5; Korean; Do Not Use on New Program; No Replacement)
GMKOREA EDS-M-8141-2015 Grease (Version 5; English/Korean; do not use on new programs; not replaceable)
GMKOREA EDS-M-8053-2015 Oil High Viscosity (Version 5; English/Korean; do not use on new programs; not replaceable)
GMKOREA EDS-M-8149-2015 Grease Spray (Version 6; English/Korean; do not use on new programs; not replaceable)

DE-VDA

VDA 280-6D-2008 Colorimetric measurements on motor vehicles - Colorimetric measurements on automotive glass within the visible spectrum - Colorimetric measurements on glass and rear view mirrors in different directions

ZA-SANS

NRS 046-2002 Electricity distribution - Load-break switch-disconnectors - Pole-mounted type for rated A.C. voltages above 1 kV and up to and including 36 kV

Indonesia Standards

SNI 13-7121-2005 Surveys of ground water potential scale 1: 100.000 or more

BE-NBN

NBN-HD 503 S2-1994 Lights used on road transport vehicles. performance requirements

RO-ASRO

STAS 9180-1973 Foundation ground　DETERMINATION OF WATER HOLDING CAPACITY OF SOILS, AT DIFFERENT SUCTIONS
STAS 6973-1990 METALL.IC COATINGS Electrochemical coatings porosity determination on steel
STAS 8259/1-1982 ORGANIC DYES FOR LEATHER Determination of colouring power on leather specimens
STAS 9690-1990 Additived oils for engines. Behaviour checking up on Petter AV1 engine

RU-GOST R

GOST 24617-1981 Protection agents for wood. Test method of inflamable properties on models
GOST R ISO 10532-1999 Earth-moving machinery. Machine-mounted retrieval device. Performance requirements

American Society for Testing and Materials (ASTM)

ASTM F2861-14 Standard Test Method for Enhanced Performance of Combination Oven in Various Modes
ASTM F2861-10 Standard Test Method for Enhanced Performance of Combination Oven in Various Modes
ASTM F1599-95 Standard Guide for Collecting Performance Data on Temporary Storage Devices
ASTM F1599-95(2018) Standard Guide for Collecting Performance Data on Temporary Storage Devices
ASTM E2334-09(2013)e2 Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample

Others: