hj1226 sulfide standard curve

hj1226 sulfide standard curve, Total:360 items.

The international standard classification for "hj1226 sulfide standard curve" includes: Noise with respect to human beings , Stationary source emissions , Occupational safety. Industrial hygiene , Workplace atmospheres , Ambient atmospheres , Optical measuring instruments , Rubber , Power stations in general , Products of the chemical industry .

The Chinese standard classification for "hj1226 sulfide standard curve" includes: Acoustic Measurement , Discharge standards for industrial pollutants of mining areas and raw materials , Environmental sanitation , Labor sanitation , Optical testing instrument , Rubber products in general , Diagnostic standard for occupational diseases , Power plant and electric power system operating maintenance , Electromagnetic Measurement .

未注明发布机构

DIN EN 14212:2005 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
DIN EN 14791 E:2004-01 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
ASTM D5623-24 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
DIN ISO 226 E:2001-11 Acoustics - Normal equal-loudness-level contours
DIN EN 14791 E:2014-12 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 36063-2018(英文版) Nanotechnology: Standard Raman frequency shift curves for Raman spectroscopy calibration
GB/T 17097-1997 Hygienic standard for sulfur dioxide in indoor air
GB 26132-2010 Emission standard of pollutants for sulfuric acid industry
GB/T 36063-2018e Nanotechnologies—Raman shift standard curve for spectrometer calibration
GB 8777-1988 Hygienic standard for sulfur hexafluoride in the air of workplace
GB/T 2942-1991 Rubber,vulcanized-Determination of static adhesion to textile cord ch-pull test
GB/T 36063-2018 Nanotechnologies—Raman shift standard curve for spectrometer calibration
GB/T 11941-1989 standard methods for hygienic examination of sulfide in drinking water sources-Gas chromatography
GB/T 4963-2007 Acoustics—Normal equal-loudness-level contours
GB 18069-2000 Health protection zone STANDARD for sodium sulphuret plant

中华人民共和国国家卫生和计划生育委员会

GB 11941-1989 Standard method for hygienic examination of sulfide in raw water
GBZ 58-2002 Diagnostic Criteria of Occupational Acute Sulfur Dioxide Poisoning

Group Standards of the People's Republic of China

T/CECS 1068-2022 Reliability Appraisal Standards for Hyperbolic Cooling Towers
T/CEC 636-2022 Preparation method of hydrogen fluoride standard gas in sulfur hexafluoride
T/SHZSAQS 00084-2022 Formaldehyde standard curve preparation technical regulations

Professional Standard - Urban Construction

CJ 26.10-1991 Determination of standard sulfide in urban sewage water quality inspection method

Hebei Provincial Standard of the People's Republic of China

DB13/ 831-2006 Chloride Emission Standard
DB13/ 186-1993 Qualitative test method for sulfur and sulfide in potassium chlorate fuse

National Metrological Technical Specifications of the People's Republic of China

JJF 1711-2018 Calibration Specification for Sulfur Hexafluoride Decomposition Products Detectors

Occupational Health Standard of the People's Republic of China

GBZ 31-2002 Diagnostic Criteria of Occupational Acute Hydrogen Sulfide Poisoning
GBZ 4-2022 Diagnos ic standard for occupational carbon disulfide poisoning
GBZ 4-2002 Diagnostic Criteria of Occupational Chronic Carbon Disulfide Poisoning

Professional Standard - Electricity

DL/T 941-2005 Quality standard for sulphur hexafluoride of transformer in service
DL/T 941-2021 Quality standard for sulphur hexafluoride of transformer in service

Professional Standard - Aviation

HB 5246-1993 Method for Preparation of Standard Test Block for Vulcanized Sealant at Room Temperature

National Metrological Verification Regulations of the People's Republic of China

JJG 493-1987 Audion Magnetic Properties of Standard Specimen of Soft Magnetic Materials (A-C Magnetization Curne and Amp;itude Permeability)

国家能源局

SY/T 7483-2020 Determination of sulfur compounds in natural gas by on-line gas chromatography

PL-PKN

PN BN 7312-02-1964 Standard paper sulphi?e chemical pulp unbleached
PN C04001-1967 Petroleum Determination of curve of the veritabies boilings tempera?ures and of curves of the physicols and chemicals properties

National Association of Corrosion Engineers (NACE)

NACE RP0197-1997 Standard Format for Computerized Electrochemical Polarization Curve Data Files
NACE RP0197-2004 Standard Format for Computerized Electrochemical Polarization Curve Data Files Item No. 21080

Association Francaise de Normalisation

NF S30-003*NF ISO 226:2004 Acoustics - Normal equal-loudness-level contours
NF X43-372*NF EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
NF EN 14791:2017 Emissions from stationary sources - Determination of the mass concentration of sulfur oxides - Standardized reference method
NF T94-210:1998 Chemicals used for treatment of water intended for human consumption. Sodium thiosulfate.
NF T94-209:1998 Chemicals used for treatment of water intended for human consumption. Sodium sulfite.
NF T94-207:1998 Chemicals used for treatment of water intended for human consumption. Ammonium sulfate.
NF X43-062*NF EN 14212:2013 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
NF A04-115:1987 Iron and Steel - Characterization of sulfide shapes in free-cutting steels using standards diagrams - Micrographic method
NF T94-214:1998 Chemicals used for treatment of water intended for human consumption. Sodium disulfite.

British Standards Institution (BSI)

BS ISO 226:2003 Acoustics - Normal equal-loudness-level contours
BS EN 14791:2017 Stationary source emissions. Determination of mass concentration of sulphur oxides. Standard reference method
BS EN 14212:2012(2014) Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
BS EN 14212:2012 Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
BS EN 14212:2005 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence

International Organization for Standardization (ISO)

ISO 226:1987 Acoustics; Normal equal-loudness level contours
ISO 226:2023 Acoustics — Normal equal-loudness-level contours
ISO 226:2003 Acoustics - Normal equal-loudness-level contours

RU-GOST R

GOST 9735-1987 Profile grinders. Standards of accuracy
GOST R 54554-2011 Standard rubber compounds. Materials, equipment and procedures for mixing and preparing vulcanized sheets
GOST R 54554-2011(2018) Standard rubber compounds. Materials, equipment and procedures for mixing and preparing vulcanized sheets
GOST R 8.920-2016 State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Nitrogen oxide, Nitrogen dioxide, Hydrogen sulfide, Sulfur dioxide, Ammonia. Procedure of determining the metrological characteristics

American Society for Testing and Materials (ASTM)

ASTM D1336-07(2015) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D4658-08 Standard Test Method for Sulfide Ion in Water
ASTM D1336-97 Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D4978-16 Standard Test Methods for Screening of Reactive Sulfides in Waste
ASTM D1336-97(2003) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D4978-95(2001) Standard Test Methods for Screening of Reactive Sulfides in Waste
ASTM D4978-95 Standard Test Methods for Screening of Reactive Sulfides in Waste
ASTM C1580-05 Standard Test Method for Water-Soluble Sulfate in Soil
ASTM D1712-03 Standard Practice for Resistance of Plastics to Sulfide Staining
ASTM D1712-09 Standard Practice for Resistance of Plastics to Sulfide Staining
ASTM D3883-04 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM D2493/D2493M-09 Standard Viscosity-Temperature Chart for Asphalts
ASTM E561-21 Standard Test Method for K R Curve Determination
ASTM E561-20 Standard Test Method for K R Curve Determination
ASTM E561-19e1 Standard Test Method for K R Curve Determination
ASTM D4978-95(2007) Standard Test Methods for Screening of Reactive Sulfides in Waste
ASTM E561-22 Standard Test Method for K R Curve Determination
ASTM D2472-15(2023) Standard Specification for Sulfur Hexafluoride
ASTM E561-08e1 Standard Test Method for K-R Curve Determination
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM E561-19 Standard Test Method for K R Curve Determination
ASTM D2472-00(2014) Standard Specification for Sulfur Hexafluoride
ASTM D3182-89(2001) Standard Practice for Rubber8212;Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D3182-89(2001)e1 Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D3182-89(1994) Standard Practice for Rubber8212;Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D3182-21 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D3182-89(2006) Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D2472-00(2006) Standard Specification for Sulfur Hexafluoride
ASTM D7183-07e1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM E561-15 Standard Test Method for K R Curve Determination
ASTM D7183-07 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM E561-98 Standard Practice for R-Curve Determination
ASTM D2472-00 Standard Specification for Sulfur Hexafluoride
ASTM F1743-96(2003) Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
ASTM D3182-21a Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM C1159-98(2012) Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
ASTM D2472-15 Standard Specification for Sulfur Hexafluoride
ASTM D2230-96(2002)e1 Standard Test Method for Rubber Property-Extrudability of Unvulcanized Compounds
ASTM E561-08 Standard Test Method for K-R Curve Determination
ASTM D3883-04(2008) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM D5553-95(2019) Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
ASTM D2230-17e1 Standard Test Method for Rubber Property—Extrudability of Unvulcanized Compounds
ASTM C1159-98(2003) Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
ASTM D3883-99 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM D3182-15 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM C777-93(1999) Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass
ASTM C777-04(2019) Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass
ASTM D2230-17 Standard Test Method for Rubber Property—Extrudability of Unvulcanized Compounds
ASTM D3182-16 Standard Practice for Rubber&x2014Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D4374-00 Standard Test Methods for Cyanides in Water--Automated Methods for Total Cyanide, Acid dissociable Cyanide, and Thiocyanate
ASTM D3883-04(2012) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D2230-96e1 Standard Test Method for Rubber Property-Extrudability of Unvulcanized Compounds
ASTM E561-05 Standard Test Method for K-R Curve Determination
ASTM C1159-98(2008) Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
ASTM C1159-98 Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
ASTM E561-15a Standard Test Method for K R Curve Determination
ASTM D4374-06 Standard Test Methods for Cyanides in Water-Automated Methods for Total Cyanide, Weak Acid Dissociable Cyanide, and Thiocyanate
ASTM D5553-95(2012) Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
ASTM D2230-96(2002) Standard Test Method for Rubber Property-Extrudability of Unvulcanized Compounds
ASTM D2230-17(2022) Standard Test Method for Rubber Property—Extrudability of Unvulcanized Compounds
ASTM D2230-96(2012) Standard Test Method for Rubber Propertymdash;Extrudability of Unvulcanized Compounds
ASTM D3182-15a Standard Practice for Rubber&x2014Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM E561-10e2 Standard Test Method for K-R Curve Determination
ASTM E561-05e1 Standard Test Method for K-R Curve Determination
ASTM D5051-97 Standard Test Method for Rubber Chemicals-Benzothiazyl Disulfide (MBTS)-Assay
ASTM C287-98 Standard Specification for Chemical-Resistant Sulfur Mortar
ASTM C287-98(2003) Standard Specification for Chemical-Resistant Sulfur Mortar
ASTM F1743-08 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
ASTM D3182-07(2012) Standard Practice for Rubbermdash;Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D3182-07 Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM C1296-95 Standard Test Method for Determination of Sulfur in Uranium Oxides and Uranyl Nitrate Solutions by X-Ray Fluorescence (XRF)
ASTM D2230-96(2007) Standard Test Method for Rubber Property-Extrudability of Unvulcanized Compounds
ASTM D5553-95(2001) Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
ASTM C1296-95(2001) Standard Test Method for Determination of Sulfur in Uranium Oxides and Uranyl Nitrate Solutions by X-Ray Fluorescence (XRF)
ASTM D5553-95 Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
ASTM D5553-95(2006) Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
ASTM D7652-11 Standard Test Method for Determination of Trace Hydrogen Sulfide, Carbonyl Sulfide, Methyl Mercaptan, Carbon Disulfide and Total Sulfur in Hydrogen Fuel by Gas Chromatography and Sulfur Chemiluminescence Detection
ASTM D878-96a Standard Test Method for Inorganic Chlorides and Sulfates in Insulating Oils
ASTM D1336-07(2011) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM F3141-23 Standard Guide for Total Knee Replacement Loading Profiles
ASTM D878-01(2006) Standard Test Method for Inorganic Chlorides and Sulfates in Insulating Oils
ASTM D878-01 Standard Test Method for Inorganic Chlorides and Sulfates in Insulating Oils
ASTM D878-01e1 Standard Test Method for Inorganic Chlorides and Sulfates in Insulating Oils
ASTM D2084-17 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM C777-04 Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass
ASTM C287-98(2012) Standard Specification for Chemical-Resistant Sulfur Mortar
ASTM C287-98(2008)e1 Standard Specification for Chemical-Resistant Sulfur Mortar
ASTM D5289-07 Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM D2084-19a Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D2084-11(2016) Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D2084-19 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D7602-11 Standard Practice for Installation of Vulcanized Rubber Linings
ASTM D6746-03 Standard Test Method for Raw Rubber or Unvulcanized Compounds8212;Determination of Tensile Green Strength
ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D5623-94(2014) Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D7493-14(2018) Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
ASTM D2136-02(2012) Standard Test Method for Coated Fabricsmdash;Low-Temperature Bend Test
ASTM D5289-07a Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM D7493-08 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
ASTM D5623-94(1999)e1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E305-07 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM E305-13 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM D5044-02 Standard Test Method for Rubber Chemicals-Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM E561-10 Standard Test Method for K-R Curve Determination
ASTM D5289-17 Standard Test Method for Rubber Property&x2014Vulcanization Using Rotorless Cure Meters
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
ASTM D5623-94(2009) Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D2084-01 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D6746-02 Standard Test Method for Raw Rubber or Unvulcanized Compounds8212;Determination of Tensile Green Strength
ASTM D4731-93(1998) Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
ASTM D7602-11(2017) Standard Practice for Installation of Vulcanized Rubber Linings
ASTM D1712-96 Standard Practice for Resistance of Plastics to Sulfide Staining
ASTM D1712-09(2020) Standard Practice for Resistance of Plastics to Sulfide Staining
ASTM D5051-02 Standard Test Method for Rubber Chemicals-Benzothiazyl Disulfide (MBTS)-Assay
ASTM D4731-02(2008)e1 Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
ASTM D6746-02a Standard Test Method for Raw Rubber or Unvulcanized Compounds8212;Determination of Tensile Green Strength
ASTM D4731-13(2020) Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D2084-07 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D5289-19 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D4952-97 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D2136-02 Standard Test Method for Coated Fabrics8212;Low-Temperature Bend Test
ASTM D854-06 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D500-95(2009) Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils
ASTM D5289-95(2001) Standard Test Method for Rubber Property8212;Vulcanization Using Rotorless Cure Meters
ASTM D4730-13(2020) Standard Specification for Flooding Compounds for Telecommunications Wire and Cable
ASTM D2284-95 Standard Test Method for Acidity of Sulfur Hexafluoride
ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D412-68 Standard Method Of Tension Testing Of Vulcanized Rubber
ASTM D2284-95(2002) Standard Test Method for Acidity of Sulfur Hexafluoride
ASTM D2284-11 Standard Test Method for Acidity of Sulfur Hexafluoride
ASTM D500-95(2016) Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils
ASTM D4730-93(1998) Standard Specification for Flooding Compounds for Telecommunications Wire and Cable
ASTM D2284-11(2019) Standard Test Method for Acidity of Sulfur Hexafluoride
ASTM E305-21 Standard Practice for Establishing and Controlling Spark Atomic Emission Spectrochemical Analytical Curves
ASTM D7493-22 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
ASTM D2136-02(2007) Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM D2136-02e1 Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM D6177-19 Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets
ASTM D5289-95 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D528-97(2007) Standard Test Method for Machine Direction of Paper and Paperboard
ASTM D5289-19a Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM E257-98(2003)e1 Standard Test Method for Sulfur in Organic Compounds by Sodium Peroxide Bomb Ignition
ASTM F2523-13(2020) Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers
ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D5303-92(2012) Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography
ASTM D5353-95 Standard Test Method for Determination of Total Desulfated Fatty Matter
ASTM D5623-19 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
ASTM D500-95(2003) Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils
ASTM E257-98 Standard Test Method for Sulfur in Organic Compounds by Sodium Peroxide Bomb Ignition
ASTM D1712-09(2014) Standard Practice for Resistance of Plastics to Sulfide Staining
ASTM C1518-04 Standard Specification for Precured Elastomeric Silicone Joint Sealants
ASTM D2084-95 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D2784-06 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
ASTM D500-95 Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils
ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D4730-02(2008) Standard Specification for Flooding Compounds for Telecommunications Wire and Cable
ASTM D853-03 Standard Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons
ASTM D853-04 Standard Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons
ASTM D2084-06 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM G91-97(2004) Standard Practice for Monitoring Atmospheric SO 2 Using the Sulfation Plate Technique
ASTM D2084-11 Standard Test Method for Rubber Propertymdash;Vulcanization Using Oscillating Disk Cure Meter
ASTM D853-97 Standard Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons
ASTM D5289-12 Standard Test Method for Rubber Propertymdash;Vulcanization Using Rotorless Cure Meters
ASTM E1773-18 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
ASTM D5173-97(2001) Standard Test Method for On-Line Monitoring of Carbon Compounds in Water by Chemical Oxidation, by UV Light Oxidation, by Both or by High Temperature Combustion Followed by Gas Phase NDIR or by Electr
ASTM D4818-89(2012) Standard Classification for Rubber Compounding Materialsmdash;Vulcanization Accelerators
ASTM D5303-19 Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography
ASTM C1518-02 Standard Specification for Precured Elastomeric Silicone Joint Sealants
ASTM D5353-95(2006) Standard Test Method for Determination of Total Desulfated Fatty Matter
ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM D4730-13 Standard Specification for Flooding Compounds for Telecommunications Wire and Cable
ASTM D5353-95(2001) Standard Test Method for Determination of Total Desulfated Fatty Matter
ASTM D2010/D2010M-98(2010) Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique
ASTM D2784-11 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
ASTM D5303-20 Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography
ASTM D853-97(2001) Standard Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons
ASTM E2403-06(2018) Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E1773-05 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
ASTM D6134/D6134M-07(2024) Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems
ASTM D4818-89(1999) Standard Classification for Rubber Compounding Materials-Vulcanization Accelerators
ASTM D1415-68 Standard Test Method for International Hardness Of Vulcanized Rubber
ASTM C386-93(2008) Standard Practice for Use of Chemical-Resistant Sulfur Mortar
ASTM D5051-06(2021)e1 Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay
ASTM D4811/D4811M-16(2023) Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
ASTM E1773-10 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
ASTM D4337-89(2017) Standard Test Methods for Analysis of Linear Detergent Alkylates
ASTM D619-14 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ASTM D4730-02 Standard Specification for Flooding Compounds for Telecommunications Wire and Cable
ASTM D4732-02(2008)e1 Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
ASTM D619-99(2004) Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ASTM D6944-09 Standard Practice for Resistance of Cured Coatings to Thermal Cycling
ASTM D6944-09e1 Standard Practice for Resistance of Cured Coatings to Thermal Cycling
ASTM D619-99 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ASTM D4337-89(1995)e1 Standard Test Methods for Analysis of Linear Detergent Alkylates
ASTM D4732-13 Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
ASTM F1216-05 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
ASTM D4818-21 Standard Classification for Rubber Compounding Materials—Vulcanization Accelerators
ASTM D4810-06 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
ASTM D4811/D4811M-16 Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
ASTM D7493-14 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
ASTM D6068-10(2018) Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D2136-19e1 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM D2136-94(1998) Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM D2136-19 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM E1773-00 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
ASTM E561-23 Standard Test Method for K R Curve Determination
ASTM D4810-88(1999) Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
ASTM D5349-95(2012) Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method
ASTM D6411/D6411M-99 Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
ASTM D4731-02 Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
ASTM F1216-06 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube

PK-PSQCA

PS 122-1985 PAKISTAN STANDARD METHOD FOR THE DETERMINATION OF CRIMP OF YARN IN FABRIC

Military Standards (MIL-STD)

DOD A-A-53750-1988 THIORIDAZINE HYDROCHLORIDE TABLETS, USP

SCC

AWPA P19-04 Standard for Oligomeric Alkylphenol Polysulfide (PXTS) Preservative
AASHTO R 75-2016(2020) Standard Practice for Developing a Family of Curves
AASHTO T 272-2004 Standard Method of Test for Family of Curves---One-Point Method
AS 1469:1973 Criteria curves for rating noise and establishing acoustic environment
NS-EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
MIL MIL-F-10336E-1991 FIBER SHEET, VULCANIZED (S/S BY ASTM-D710)
DANSK DS/EN 14791:2017 Stationary source emissions – Determination of mass concentration of sulphur oxides – Standard reference method
UNE 77413:1995 ECOTOXICOLOGY. PHYSICO-CHEMICAL PROPERTIES. CHARACTERIZATION OF CHEMICAL SUBSTANCIES BY THE DETERMINATION OF THE VAPOUR PRESSURE CURVE
NACE MR0175-2000 Standard Material Requirements - Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment
AENOR UNE-EN 14791:2017 Emissions from stationary sources. Determination of the mass concentration of sulfur oxides. Standard reference method.
NACE MR0175-2002 Standard Material Requirements - Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment
NACE MR0175-2001 Standard Material Requirements - Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment
NACE MR0175-1999 Standard Material Requirements - Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment
DIN 58940-2 Supplement 1:1978 Methods for the determination of susceptibility of pathogenic bacteria (without mycobacteria) to chemotherapeutic agents of discs for agar diffusion test example for getting the standard curve
DIN EN 14791 E:2014 Draft Document - Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method; German version prEN 14791:2014
ASTM D6476-10 Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds
AASHTO R 62-2013(2021) Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures
ASTM D5623-97(2004)e1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection

Korean Agency for Technology and Standards (KATS)

KS I ISO 226:2014 Acoustics — Normal equal-loudness level contours
KS I ISO 226:2003 Acoustics-Normal equal-loudness level contours
KS I 2105-2009 Sulfur dioxide(standard reference gas)
KS I 2105-2010 Sulfur dioxide(standard reference gas)
KS M 1015-1994 Sulfur dioxide(standard reference gas)
KS Q ISO 11095:2012 Linear calibration using reference materials
KS M 0121-2009 General rule for chemical standard materials
KS M 1042-2009 Fluoride ion standard solution

AASHTO - American Association of State Highway and Transportation Officials

T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
PP 62-2009 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA)
T 272-1986 Standard Method of Test for Family of Curves - One-Point Method (HM-22; PART IIB)

The American Road & Transportation Builders Association

AASHTO R 75-2016(R2020) Standard Practice for Developing a Family of Curves
AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method

TH-TISI

TIS 1007-1990 Standard for carbon disulphide for industrial use

CU-NC

NC 93-02-209-1986 Standards System for Environment Protection Atmosphere Determination of Sulfation Index. Chemical Analysis
NC 90-13-33-1986 Reference Standard Samples. Sulfidic Quartz Rock AA MPR of the Composition for Chemical Analysis

Japanese Industrial Standards Committee (JISC)

JIS K 0004:1992 Sulfur dioxide (standard reference gas)
JIS K 0004:1998 Reference material -- Standard gas -- Sulfur dioxide

SE-SIS

Nr 39-1992 Curve electronics according to Swedish standards
SIS SMS 2027-1975 Dust separating. Standard curves for dust

German Institute for Standardization

DIN ISO 226:2006 Acoustics - Normal equal-loudness-level contours (ISO 226:2003);English version of DIN ISO 226:2006-04
DIN EN 14791:2017-05 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method; German version EN 14791:2017
DIN 48051-1:1959-09 Power current overhead lines; bent insulator spindles, standard design

American National Standards Institute （ANSI)

ANSI/TIA-862-A-2011 Building Automation Systems Cabling Standard
ANSI/IEEE C37.112:1996 Standard Inverse-Time Characteristic for Overcurrent Relays

ZA-SANS

SANS 4374:2007 Standard test methods for cyanides in water - Automated methods for total cyanide, weak acid dissociable cyanide, and thiocyanate
SANS 6194:2007 Slippage resistance of yarns at standard seams in fabrics

Society of Automotive Engineers (SAE)

SAE J739-1991 Cutting Edge - Curved Grader, Standard June 1991

ESDU - Engineering Sciences Data Unit

ESDU 80035-1980 Buckling of outstanding flanges. Direct stresses varying linearly or parabolically.

GSO

BH GSO ASTM F3141:2023 Standard Guide for Total Knee Replacement Loading Profiles
GSO ASTM F3141:2023 Standard Guide for Total Knee Replacement Loading Profiles
OS GSO ASTM D7166:2013 Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
BH GSO ASTM D7166:2015 Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
GSO ASTM D7166:2013 Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
BH GSO ASTM F1874:2022 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
GSO ASTM F1874:2021 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
BH GSO ASTM D5623:2023 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
GSO ASTM D5623:2023 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection

IT-UNI

UNI S 195-1943 Insulation material standards. Numerical charts and graphs
UNI 4906-1962 Elastomeric Materials: Vulcanized Material Test, Standard Temperature

AENOR

UNE 77413:2011 Ecotoxicology. Physico-chemical properties. Characterization of chemical substances by the determination of the vapour pressure curve.
UNE-EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method

KE-KEBS

KS 03-51-1978 KENYA STANDARD SPECIFICATION FOR AMMONIUM SULPHATE NITRATE FERTILIZER

Standard Association of Australia （SAA）

ASRM 012B-3-2005 Reference material - Coal sample having total sulfur of 0.68%

VE-FONDONORMA

COVENIN 884-1975 Test methods for sulfur and sulfur-containing corrosive compounds in Venezuelan petroleum derivatives standards (medical certificate)

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions

Underwriters Laboratories (UL)

UL 746E BULLETIN-2015 UL Standard for Safety Polymeric Materials – Industrial Laminates@ Filament Wound Tubing@ Vulcanized Fibre@ and Materials Used In Printed-Wiring Boards
UL 746E BULLETIN-2012 UL Standard for Safety Polymeric Materials – Industrial Laminates@ Filament Wound Tubing@ Vulcanized Fibre@ and Materials Used In Printed-Wiring Boards
UL 746E BULLETIN-2010 UL Standard for Safety Polymeric Materials – Industrial Laminates@ Filament Wound Tubing@ Vulcanized Fibre@ and Materials Used In Printed-Wiring Boards
UL 746E BULLETIN-2005 UL Standard for Safety Polymeric Materials – Industrial Laminates@ Filament Wound Tubing@ Vulcanized Fibre@ and Materials Used In Printed-Wiring Boards
UL 746E BULLETIN-2013 UL Standard for Safety Polymeric Materials – Industrial Laminates@ Filament Wound Tubing@ Vulcanized Fibre@ and Materials Used In Printed-Wiring Boards
UL 746E BULLETIN-2016 UL Standard for Safety Polymeric Materials – Industrial Laminates@ Filament Wound Tubing@ Vulcanized Fibre@ and Materials Used In Printed-Wiring Boards
UL 746E BULLETIN-2002 UL Standard for Safety Polymeric Materials – Industrial Laminates@ Filament Wound Tubing@ Vulcanized Fibre@ and Materials Used In Printed-Wiring Boards

European Association of Aerospace Industries

AECMA PREN 3795-1997 Aerospace Series Anaerobic Polymerisable Compounds Test Method Determination of Freedom from Excessive Cure Rate Edition P1

International Electrotechnical Commission (IEC)

IEC PAS 62170:2000 Bond wire modeling standard

(U.S.) Ford Automotive Standards

FORD ESW-M2C105-A-2004 LUBRICANT, HYPOID GEAR - SAE 90 SULFUR PHOSPHORUS - 10% ADDITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***

CH-SNV

VSM 34675-1968 mineral oil. The curve of viscosity changing with temperature, extremely high viscosity, and viscosity index

Others: