PMT needs to be powered on after installation

PMT needs to be powered on after installation, Total:196 items.

The international standard classification for "PMT needs to be powered on after installation" includes: Bodies and body components , Agricultural machines, implements and equipment , Road vehicles in general .

The Chinese standard classification for "PMT needs to be powered on after installation" includes: Vehicle body (cab) and accessories , Farm, livestock, by-product and fish vehicles , New energy vehicle and other automobiles , Telecommunication power supply equipment , Hygiene, safety and labor protection .

Group Standards of the People's Republic of China

T/ZZB 2580-2021 Standby battery safety monitoring system
T/CSEE 0172-2021 Statistical basic data requirements for electric power communications
T/LFECA 001-2020 Service specification of distribution, installation and after-sales for furniture in Shunde e-commerce
T/QGCML 3006-2024 Residential water and electricity installation and after-sales maintenance service specifications
T/LWSZSW 05-2023 Sanitary ware e-commerce distribution, installation and after-sales service specifications
T/QGCML 195-2021 After-sales service specification for installation of angle steel towers for transmission lines

商务部

SB/T 11165-2016 Technical specifications for after-sales installation of integrated home improvement products

Professional Standard - Military and Civilian Products

WJ 2521-1998 General specification for artillery recoil devices

Military Standard of the People's Republic of China-General Armament Department

GJB 6878-2009 General requirements for demonstration on operational requirements of weapon and equipment
GJB 201-1986 Installation of the electrical connector of the artillery and tractor workshop on the rear cross member of the tractor
GJB 9967-2021 General technical requirements for protective storage packaging of mobile logistics equipment
GJB 9823-2020 General requirements for weapons and equipment combat requirements description

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1214-2013 Panel furniture after-sales installation service requirements

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 15084-2006 Motor vehicles—Rear view mirrors—Requirements of performance and installation
GB/T 31498-2015 The safety requirement of electric vehicle post crash
GB/T 32337-2015 Pneumatic fluid power. Mounting interface surfaces of 3/2 solenoid valves
GB 15084-1994 Motor vehicles-Rear view mirrors-Requirements of performance and installation
GB/T 19134-2003 Agricultural vehicles―Rear view mirrors―Requirements of performance and installation

Professional Standard - Electricity

DL/T 1733-2017 Technical requirements of optical fiber cable installation for power system communication
DL/T 2404.1-2404.2-2021 General Specifications for Power Demand Side Management

Henan Provincial Standard of the People's Republic of China

DB41/T 2408-2023 Elevator on-demand maintenance safety management specification

Professional Standard - Aviation

HB 4254-1989 Long handle machine with rear guide for installing wire thread inserts without holes, hand taps for ordinary steel ST6×1~ST8×1.25
HB 4253-1989 ST10×1~ST33×2 for short handle machine with rear guide for installing wire thread inserts for non-through holes, hand taps for ordinary steel
HB 4255-1989 Long handle machine with rear guide for installing wire thread inserts with non-through holes, hand taps for ordinary steel ST10×1~ST33×2
HB 4251-1989 Long handle machine with rear guide for installing wire nut through hole, hand tap for ordinary steel ST10×1~ST33×2
HB 4250-1989 Long handle machine with rear guide for installing wire thread insert through hole, hand tap for ordinary steel ST6×1~ST8×1.25
HB 4252-1989 Short handle machine with rear guide for installing wire thread inserts for non-through holes, hand taps for ordinary steel ST6×1~ST8×1.25
HB 4249-1989 ST10×1~ST33×2 for short handle machine with rear guide for installing wire thread insert through hole, hand tap for ordinary steel
HB 4248-1989 Short handle machine with rear guide for installing wire thread insert through hole, hand tap for ordinary steel ST6×1~ST8×1.25

Sichuan Provincial Standard of the People's Republic of China

DB51/T 2529-2018 Specifications for public safety prevention requirements of urban rail transit

Professional Standard - Post and Telecommunication

YD 5040-1997 Design Standard for Telecommunications Power Supply Equipment Installation
YDJ 1-1989 Specification for installation design of posts and communications power supply equipment

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 31498-2021 Post crash safety requirement for electric vehicle

Professional Standard-Ships

CB/T 3667.1-1995 Cable penetration device for ship cable laying and electrical equipment installation accessories

Japanese Industrial Standards Committee (JISC)

JIS E 4041:1990 General rules for the inspection of electric railcar on completion of construction
JIS F 8072:1996 Electrical installations in ships -- Part 401: Installation and test of completed installation
JIS F 8072:2006 Electrical installations in ships -- Part 401: Installation and test of completed installation
JIS E 4042:1990 General rules for the inspection of electric locomotives on completion of construction
JIS E 4042:1999 General rules for the test methods of electric locomotives on completion of construction
JIS E 4041:1999 General rules for the test methods of electric railcar on completion of construction
JIS E 4044:1990 General rules for the inspection of diesel locomotives on completion of construction
JIS D 4010:1993 Mounting of mechanical coupling devices on rear cross members of trucks
JIS E 4043:1990 General rules for the inspection of diesel railcar on completion of construction
JIS E 4045:1994 Freight cars -- General requirements for the inspection on completion of construction

AIA/NAS - Aerospace Industries Association of America Inc.

NAS574-1992 Pin@ Rear Mounting - Electronic Equipment (Rev 7)
NAS574-2014 PIN@ REAR MOUNTING@ ELECTRONIC EQUIPMENT (Rev 9)
NAS574-2012 PIN@ REAR MOUNTING@ ELECTRONIC EQUIPMENT (Rev 8)

International Federation of Trucks and Engines

NAVISTAR TMS-6044-2017 VOID - Rear Hood Mounting
NAVISTAR TMS 6044-2007 Rear Hood Mounting (Revision A)

American Society for Testing and Materials (ASTM)

ASTM E1350-97 Standard Test Methods for Testing Sheathed Thermocouples Prior to, During, and After Installation
ASTM E1350-97(2001) Standard Guide for Testing Sheathed Thermocouples Prior to, During, and After Installation
ASTM E1350-07 Standard Guide for Testing Sheathed Thermocouples, Thermocouples Assemblies, and Connecting Wires Prior to, and After Installation or Service
ASTM E1350-13 Standard Guide for Testing Sheathed Thermocouples, Thermocouples Assemblies, and Connecting Wires Prior to, and After Installation or Service

AT-ON

ONORM ISO 4009:1991 Towing vehicles; mounting of electrica! connections on rear cross-members

AENOR

UNE 28027:1961 DIMENSIONS OF BOXES FOR INSTRUMENTS ABOARD AIRCRAFTS (MOUNTING BY POSTERIOR FACE OF THE BOARD) AND DIMENSIONS OF MOUNTING.
UNE 211006:2010 High voltage a.c. cable systems. Electrical tests after installation
UNE-EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
UNE 26271:1985 ROAD VEHICLES. MOUNTING OF MECHANICAL COUPLING DEVICES UN REAR CROSS MEMBERS OF TRUCKS.

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS574-2012 PIN, REAR MOUNTING, ELECTRONIC EQUIPMENT Rev 8
AIA/NAS NAS574-2014 PIN, REAR MOUNTING, ELECTRONIC EQUIPMENT (Rev 9)

Association Francaise de Normalisation

NF R17-111:1988 Road vehicles. Towing vehicles. Mounting of electrical connections on rear cross members.
NF EN 50495:2010 Safety devices necessary for the safe operation of equipment with regard to the risk of explosion
NF R17-110:1988 Road vehicles. Mounting of mechanical coupling devices on rear cross members of trucks.
NF R27-301:1984 ROAD VEHICLES. MOTORCYCLES. MOUNTING OF REAR SHOCK ABSORBERS.
NF F67-261*NF EN 50261:2000 Railway applications - Mounting of electronic equipment
NF EN IEC 62496-4-1:2019 Optical circuit cards - Part 4-1: Interface standards - Termination of a waveguide optical circuit card assembly using twelve channel PMT connectors in a single row
NF R14-313:1984 Road vehicles. Sound signalling devices. Tests after mounting on vehicle.
NF EN IEC 62496-4-214:2020 Optical circuit cards - Part 4-214: interface standards - Termination of a waveguide optical circuit card assembly using a thirty-two channel single row symmetrical PMT connector

Aerospace Industries Association

AIA NAS 574-1992 Pin, Rear Mounting - Electronic Equipment (Rev. 7)

SE-SIS

SIS SS-ISO 4009:1991 Towing vehicles — Mounting of electrical connections on rear cross-members
SIS SS 408 01 10-1987 Rechargable batteries -Erection and ventilation
SIS SMS 997-1966 Mechanical couplings for vehicles. Rear cross member Mounting dimensions
SIS SEN 30 02 01-1963 Equipment jor electrical installations on ships General rules

International Organization for Standardization (ISO)

ISO 4009:1989 Towing vehicles; mounting of electrical connections on rear cross-members
ISO 4009:1977 Road vehicles — Towing vehicles — Mounting of electrical connections on rear cross members
ISO 10802:1992 Ductile iron pipelines; hydrostatic testing after installation
ISO 7118:1981 Road vehicles; Motorcycles; Mounting of rear shock absorbers
ISO 10802:2020 Ductile iron pipelines — Hydrostatic testing after installation

GB-REG

REG NASA-LLIS-1232-2002 Lessons Learned - Space Shuttle/Safety Upgrades/Long-Term Logistics Needs

U.S. Military Regulations and Norms

ARMY A-A-52432 A-1995 MIRROR ASSEMBLY, REARVIEW: AUTOMOTIVE EXTERIOR MOUNTING
ARMY MIL-DTL-32201-2006 MIRROR ASSEMBLIES, REARVIEW, HMMWV STYLE, 12X8 INCH (NOMINAL), EXTERIOR MOUNTING

SCC

UNE 26368:1985 TOWING VEHICLES. MOUNTING OF ELECTRICAL CONNECTIONS ON REAR CROSS MEMBERS.
MIL MIL-DTL-83729/3B-2002 CHOPPERS, ELECTROMECHANICAL, HERMETICALLY SEALED, SINGLE POLE, DOUBLE THROW, BREAK BEFORE MAKE, BRACKET MOUNT (SUPERSEDING MIL-C-83729/3A)
BS 5726-3:1992 Microbiological safety cabinets-Specification for performance after installation
DIN 18516-5 E:2012 Draft Document - Cladding for external walls, ventilated at rear - Part 5: Manufactured stone; requirements, design
DIN 18516-3 E:2017 Draft Document - Cladding for external walls, ventilated at rear - Part 3: Natural stone; requirements, design
VDI 2050 BLATT 1.1-2017 Requirements for technical centers — space requirements for installation shafts
VDI 3812 BLATT 1-2010 Assistance functions for living — determining needs for electrical installation and building automation
MIL MIL-C-83729/3A-1972 CHOPPER, ELECTROMECHANICAL HERMETICALLY SEALED, SPDT BREAK BEFORE MAKE, BRACKET MOUNT (SUPERSEDING MIL-C-83729/3) (S/S BY MIL-DTL-83729/3B)
MIL MIL-PRF-39012/8E-2015 Connectors, Receptacle, Electrical, Coaxial, Radio Frequency, (Series C (Cabled), Female, Flange Mounted, Rear Mounted, Class 2)
AS 4001.2:1992 Motor vehicles - Rear marker plates - Fitting requirements
MIL MIL-PRF-39012/70D-2011 Connectors, Receptacle, Electrical, Coaxial, Radio Frequency, Series SMB (Cabled, Pin Contact, Jamnut Mounted, Rear Mounted, Class 2)
AENOR UNE 26362-2:1984 School transportation. Dimensional and mounting specifications of the screen located behind the driver.
AS/NZS 4911:1998 General conditions of contract for the supply of equipment without installation
MIL MIL-DTL-83729/3D-2018 Choppers, Electromechanical, Hermetically Sealed, Single Pole, Double Throw, Break Before Make, Bracket Mount
MIL MIL-PRF-39012/38J-2011 Connectors, Receptacle, Electrical, Coaxial, Radio Frequency (Series SC (Cabled), Socket Contact, Flange Mounted, Rear Mounted, Class 2)
MIL MIL-DTL-83729/3C-2013 Choppers, Electromechanical, Hermetically Sealed, Single Pole, Double Throw, Break Before Make, Bracket Mount
12/30215639 DC BS 8539. Code of practice for the selection and installation of post-installed anchors in concrete and masonry
DANSK DS/EN IEC 62496-4-1:2019 Optical circuit boards – Part 4-1: Interface standards – Terminated waveguide OCB assembly using single-row twelve-channel PMT connectors
MIL MIL-PRF-39012/76D-2011 Connectors, Receptacles, Electrical, Coaxial, Radio Frequency, Series SMC (Cabled, Pin Contact, Jamnut Mounted, Rear Mounted, Class 2)
CEI EN 50495:2011 Safety devices required for the safe functioning of equipment with respect to explosion risks
CEI 18-14:2000 Electrical systems on board ships - Part 401: Installation and testing when the system is completed
CEI EN IEC 62496-4-214:2021 Optical circuit boards Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel PMT connector
AENOR UNE-EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
CAN/ULC 338:2023 VEHICLE THEFT DETERRENT EQUIPMENT AND SYSTEMS: ELECTRONIC IMMOBILIZATION SYSTEM AND AFTERMARKET INSTALLATION REQUIREMENTS
CEI EN IEC 62496-4-1:2019 Optical circuit boards Part 4-1: Interface standards - Terminated waveguide OCB assembly using single-row twelvechannel PMT connectors
MIL MIL-PRF-39012/12B-1977 CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES C (UNCABLED-RECEPTACLE, FEMALE, FLANGE MOUNTED, REAR MOUNTED, CLASS 2 ) (SUPERSEDING MIL-C-39012/12A)
DANSK DS/EN IEC 62496-4-214:2020 Optical circuit boards – Part 4-214: Interface standards – Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector
AWWA WQTC57176 Experimental Determination of the Fluence (UV Dose) Required in the UV Photodegradation of NDMA in a Treated Waste Water
DIN EN 50495 E:2007 Draft Document - Safety devices required for the safe functioning of equipment with respect to explosion risks; German version prEN 50495:2006
AS 5216:2018 Design of post-installed and cast-in fastenings in concrete
MIL MIL-PRF-39012/8D-1986 CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES C(CABLED), FEMALE, FLANGE MOUNTED, REAR MOUNTED, CLASS 2) (SUPERSEDING MIL-C-39012/8C)

ZA-SANS

SANS 10226:2001 The installation, post-installation tests and maintenance of microbiological safety cabinets
SANS 10226:2009 The installation, post-installation tests and maintenance of microbiological safety cabinets
SANS 1055:2003 Motor vehicle safety:Rear underrun protection devices
SANS 10802:2010 Ductile iron pipelines - Hydrostatic testing after installation
SANS 6281-4:2007 Test methods for impregnated paper-insulated electric cables Part 4: Tests after installation

British Standards Institution (BSI)

23/30479406 DC Draft BS IEC 60092-401. Electrical installations in ships - Part 401. Installation and test of completed installation
BS EN IEC 62496-4-214:2020 Optical circuit boards - Interface standards. Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector
BS EN IEC 62496-4-1:2019 Optical circuit boards - Interface standards. Terminated waveguide OCB assembly using single-row twelve-channel PMT connectors
BS ISO 10802:2020 Ductile iron pipelines. Hydrostatic testing after installation
BS EN 50261:1999 Railway applications - Mounting of electronic equipment
PD ISO/TR 8100-24:2016 Safety requirements for lifts (elevators). Convergence of lift requirements
BS EN 6049-005:2014 Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Sleeve flexible, post installation. Product standard
BS ISO 6469-4:2015 Electrically propelled road vehicles. Safety specifications. Post crash electrical safety

Standard Association of Australia （SAA）

AS 3011.1:1992 Electrical installations - Secondary batteries installed in buildings - Vented cells
AS 4001.2:2017 Vehicles — Rear marker plates, Part 2: Reflective rear marker plates — Fitting requirements
AS/NZS 5070.2:2008 Siting and operation of radiocommunications facilities - Guidelines for siting of radiocommunications facilities: VHF, UHF and SHF
AS 5216:2021 Design of post-installed and cast-in fastenings in concrete

Indonesia Standards

SNI 09-7026-2004 Rear shock absorbers mounting of motorcycles
SNI 0225-2011 Persyaratan Umum Instalasi Listrik 2011 (PUIL 2011)

VDI - Verein Deutscher Ingenieure

VDI 3812 Blatt 1-2009 Home automation technologies - Requirements for electrical installations and building automation and control systems

United States Navy

NAVY MIL-D-17984 A-1956 DATA PRESENTATION REQUIREMENTS, INSTALLED ENGINE PERFORMANCE AND AIR INDUCTION SYSTEMS
NAVY MIL-D-17984 A NOTICE 1-1996 DATA PRESENTATION REQUIREMENTS, INSTALLED ENGINE PERFORMANCE AND AIR INDUCTION SYSTEMS
NAVY MIL-D-17984 A (1)-1959 DATA PRESENTATION REQUIREMENTS, INSTALLED ENGINE PERFORMANCE AND AIR INDUCTION SYSTEMS
NAVY MIL-STD-2198-1990 DESIGN REQUIREMENTS FOR METAL ELECTRICAL BACKPLANE ASSEMBLIES
NAVY MIL-STD-2119 A-1990 DESIGN REQUIREMENTS FOR PRINTED-WIRING ELECTRICAL BACKPLANE ASSEMBLIES
NAVY MIL-STD-108 E VALID NOTICE 2-1990 DEFINITIONS OF AND BASIC REQUIREMENTS FOR ENCLOSURES FOR ELECTRIC AND ELECTRONIC EQUIPMENT
NAVY MIL-STD-108 E NOTICE 1-1985 DEFINITIONS OF AND BASIC REQUIREMENTS FOR ENCLOSURES FOR ELECTRIC AND ELECTRONIC EQUIPMENT

VN-TCVN

TCVN 5639-1991 Acceptance of equipments after installation.Basic principles

SAE - SAE International

SAE J616-2008 Engine Foot Mounting (Front and Rear)
SAE J616-1990 Engine Foot Mounting (Front and Rear)
SAE ARP863A-1997 Universal Turnover Build-Up Stand for Small Propulsion Units Requiring Vertical Assembly
SAE ARP863B-2012 Universal Turnover Build-Up Stand for Small Propulsion Units Requiring Vertical Assembly
SAE ARP863-1968 Universal Turnover Build- Up Stand for Small Propulsion Units Requiring Vertical Assembly
SAE AS34521-2004 CONNECTOR@ RECEPTACLE@ ELECTRIC@ BOX MOUNTING@ REAR RELEASE@ CRIMP CONTACT@ AN TYPE WITH
SAE AS34521C-2017 CONNECTOR@ RECEPTACLE@ ELECTRIC@ BOX MOUNTING@ REAR RELEASE@ CRIMP CONTACT@ AN TYPE
SAE AS34521A-2011 CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, REAR RELEASE, CRIMP CONTACT, AN TYPE

Society of Automotive Engineers (SAE)

SAE J616C-1978 ENGINE FOOT MOUNTING (FRONT AND REAR)
SAE J616-1995 Engine Foot Mounting (Front and Rear)
SAE ARP863A-2005 Universal Turnover Build-Up Stand for Small Propulsion Units Requiring Vertical Assembly
SAE AS34521B-2014 CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, REAR RELEASE, CRIMP CONTACT, AN TYPE
SAE J1369-1992 Anchorage Provisions for Installation of Child Restraint Tether Straps in Rear Seating Positions
SAE AS34541B-2019 CONNECTORS, RECEPTACLE, ELECTRICAL, JAM NUT MOUNTING, REAR RELEASE CRIMP CONTACT, AN TYPE
SAE AS34541-2003 CONNECTORS, RECEPTACLE, ELECTRICAL, JAM NUT MOUNTING, REAR RELEASE CRIMP CONTACT, AN TYPE

TH-TISI

TIS 2195-2004 Ductile iron pipelines.hydrostatic testing after installation

Korean Agency for Technology and Standards (KATS)

KS D ISO 10802:2013 Ductile iron pipelines－Hydrostatic testing after installation
KS D ISO 10802:2006 Ductile iron pipelines-Hydrostatic testing after installation
KS D ISO 10802-2006(2011) Ductile iron pipelines－Hydrostatic testing after installation
KS D ISO 10802-2013 Ductile iron pipelines－Hydrostatic testing after installation
KS R ISO 6969:2017 Road vehicles－Sound signalling devices－Tests after mounting on vehicle
KS R 4077-1999(2011) Road vehicles－Mounting of mechanical couplingdevices on rear cross members of trucks
KS C IEC 60398:2004 Industrial electroheating installations-General test methods
KS R ISO 6969-2022 Road vehicles－Sound signalling devices－Tests after mounting on vehicle

IT-UNI

UNI ISO 10802:2020 Ductile iron pipelines — Hydrostatic testing after installation

Danish Standards Foundation

DS/EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks

Lithuanian Standards Office

LST EN 50495-2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
LST EN 1501-1-2011+A1-2015 Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles

CENELEC - European Committee for Electrotechnical Standardization

EN 138000:1996 Generic Specification: Fixed Inductors for Electromagnetic Interference Suppression (Inductors for Which Safety Tests are Required)
EN IEC 62496-4-1:2019 Optical circuit boards - Part 4-1: Interface standards - Terminated waveguide OCB assembly using single-row twelve-channel PMT connectors

ES-UNE

UNE-EN IEC 62496-4-1:2019 Optical circuit boards - Part 4-1: Interface standards - Terminated waveguide OCB assembly using single-row twelve-channel PMT connectors (Endorsed by Asociación Española de Normalización in June of 2019.)
UNE-EN IEC 62496-4-214:2020 Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector (Endorsed by Asociación Española de Normalización in August of 2020.)

HU-MSZT

MSZ 151/1-1986 Conductors required for movable high power movable duct installations

German Institute for Standardization

DIN EN 6049-005:2023-07 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard; English version prEN 6049-005:2023 / Note: Date of issue 2023-06-23*Intended as replacement ...
DIN EN 6049-005:2015-03 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard; German and English version EN 6049-005:2014
DIN EN IEC 62496-4-1:2020-12 Optical circuit boards - Part 4-1: Interface standards - Terminated waveguide OCB assembly using single-row twelve-channel PMT connectors (IEC 62496-4-1:2019); German version EN IEC 62496-4-1:2019
DIN ISO 7118:1985 Road vehicles; motorcycles; mounting of rear shock absorbers
DIN EN 50261:1999 Railway applications - Mounting of electronic equipment; German version EN 50261:1999

NL-NEN

NEN-ISO 4178:1993 Complete, filled transport packages. Distribution trials. Information to be recorded (ISO 4178:1980)

RO-ASRO

STAS 8763/6-1986 ELECTRICAL CONNECTIONS BETWEEN TOWING VEHICLES AND TOWED VEHICLES Mounting of electric connections on rear cross member
STAS SR ISO 6969:1995 Road vehicles - Sound signalling devices - Test after mounting on vehicle

GSO

GSO ISO 10802:2023 Ductile iron pipelines — Hydrostatic testing after installation
BH GSO ISO 10802:2023 Ductile iron pipelines — Hydrostatic testing after installation
GSO IEC 62496-4-214:2024 Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector

Defense Logistics Agency

DLA MIL-PRF-39012/76 D-2011 CONNECTORS, RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMC (CABLED, PIN CONTACT, JAMNUT MOUNTED, REAR MOUNTED, CLASS 2)
DLA MIL-PRF-39012/70 D-2011 CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMB (CABLED, PIN CONTACT, JAMNUT MOUNTED, REAR MOUNTED, CLASS 2)

European Committee for Standardization (CEN)

EN 6049-005:2014 Aerospace series - Electrical cables@ installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible@ post installation - Product standard

International Electrotechnical Commission (IEC)

IEC 62496-4-1:2019 Optical circuit boards - Part 4-1: Interface standards – Terminated waveguide OCB assembly using single-row twelve-channel PMT connectors
IEC 62496-4-214:2020 Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector

CN-GJB-H

GJB 7135-2011 General technical requirement for logistic equipment at sea

GOSTR

GOST 29120-1991 Uniform provisions concerning the approval of: 1. Rear underrun protective devices; 2. Vehicles with regard to the installation of an rear underrun protective device an approved type; 3. Vehicles with regard to their rear underrun protection

ACI - American Concrete Institute

ACI 355.2-2000 Evaluating the Performance of Post-Installed Mechanical Anchors in Concrete
ACI 355.2R-2000 Evaluating the Performance of Post-Installed Mechanical Anchors in Concrete

CZ-CSN

CSN 33 3270-1992 Communication and security device in power plants and distribution elektrical energy and heat

Underwriters Laboratories (UL)

UL 9595-2021 STANDARD FOR SAFETY Factory Follow-Up on Personal Flotation Devices (PFDs)

US-DOT

DOT 49 CFR PART 221-2010 REAR END MARKING DEVICE-PASSENGER, COMMUTER AND FREIGHT TRAINS

Others: