The difference between water pressure test and air pressure test

The difference between water pressure test and air pressure test, Total:157 items.

The international standard classification for "The difference between water pressure test and air pressure test" includes: Pressure vessels, gas cylinders , Other standards related to ceramics , Environmental testing , Protection against dangerous goods , Adhesives , Electrical and electronic testing , Fuses and other overcurrent protection devices , Earthworks. Excavations. Foundation construction. Underground works , Tyres in general , Textile fabrics , Trailing stock .

The Chinese standard classification for "The difference between water pressure test and air pressure test" includes: Pressure vessel , Building sanitary ceramics , Material composition analysis instrument and environment detection instrument in general , Marking, packaging, transport and storage in general , Basic standards and general methods for adhesives , Electric transmission and transformation equipment in general , Engineering location, hydrogeological survey and geotechnical engineering , Tyre , Engine spare parts , Hydrogeological survey , Textile articles in general , Railway trucks , Marine boiler and steam engine .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 15385-1994 Method for hydraulic burst test of gas cylinders
GB/T 15385-2011 Method for hydraulic burst test of gas cylinder
GB/T 42426-2023 Chemicals—Vapor pressure test
GB/T 11606.10-1989 The method of environmental test for analytical instruments--Low air pressure test
GB/T 9251-2022 Methods for hydrostatic test of gas cylinders
GB/T 2836-1998 Test method for hydrostatic proof of vitrified clay pipe
GB/T 15385-2022 Method for hydraulic burst test of gas cylinder
GB/T 9251-2011 Methods for hydrostatic test of gas cylinders
GB/T 17627-2019 High-voltage test techniques for low-voltage equipment—Definitions,test and procedure requirements,test equipment
GB/T 15331-2020 Test method for water vapor transmission rate of pressure-sensitive tapes
GB/T 4474-1992 Short-line fault tests for A.S. high-voltage circuit-breaker
GB/T 9251-1997 Method for hydraulic test of gas cylinders

Professional Standard - Non-ferrous Metal

YS 5216-2000 Specification for pump-in test
YS/T 5216-2020 Pressure water test procedures
YS 5216-2000(条文说明) Pressure water test procedures

Group Standards of the People's Republic of China

T/CSIQ 68001-2020 Water proofing performance test for electric and electronic products —Pneumatic method
T/CPI 13001-2022 External pressure test method for underwater oil and gas equipment
T/CEC 5072-2022 High-pressure pressurized water test procedure for pumped-storage power station

Taiwan Provincial Standard of the People's Republic of China

CNS 10460-2007 Method of test for water resistance of clothes - Hydrostatic pressure test
CNS 11236-1991 Basic Environmental Testing Procedures Part 2 : Tests, Test M : Low Air Pressure
CNS 10460-1983 Method of Test for Water Resistance of Clothes-Hydrostatic Pressure Test
CNS 3038-1969 Method of Test for Air Compressors

Professional Standard - Energy and Power Planning

DL/T 2514-2022 Technical specifications for protection of high-voltage test areas

Professional Standard - Chemical Industry

HG/T 2186-2012 Test method of Water pressure for tyres
HG 2186-1991 Tire water pressure test method
HG/T 2186-1991 Tire hydrostatic test method

Professional Standard - Aviation

HB 7115-1994 Pneumatic Performance Test of Compressor
HB 7115-1994 (1) Compressor aerodynamic performance test

Professional Standard - Geology

DZ/T 0132-1994 Regulations on borehole hydraulic pressure test

Military Standard of the People's Republic of China-General Armament Department

GJB 360.5-1987 Test methods for electronic and electrical components Low pressure test
GJB 588-1988 Test methods for medium-pressure air systems for diving and life-saving
GJB 983.3-1990 Military rubber film test methods air tightness test and pressure test
GJB 350.38-1987 Surface combat ship mooring and sailing test procedures Compressed air system testing
GJB 589-1988 Test methods for diving life-saving high-pressure air systems
GJB 6850.166-2009 Surface ship mooring and sea test procedures part 166: Air compressor and compressed air system test

Professional Standard - Textile

FZ/T 01004-1991 Coated Fabrics - Determination of Resistance to Penetration by Water (Hydrostatic Test)

Professional Standard - Aerospace

QJ 1323.5-1987 Electromagnetic relay test method low pressure test

Professional Standard - Railway

TB/T 1803-2007 Hydraulic test of railway tank car

Professional Standard - Water Conservancy

SL 237-019-1999 Code for test of soil - pore water pressure dissipation test

Professional Standard - Traffic

JT/T 4190-1982 Technical requirement for the hydrostatic test and steam test for marine boiler

Professional Standard - Energy

NB/T 20526-2018 Hydrostatic shop test requirement for steam generator of pressurized water reactor

German Institute for Standardization

DIN EN 437:2019-04 Test gases - Test pressures - Appliance categories
DIN EN 437 E:2020-08 Test gases - Test pressures - Appliance categories
DIN EN 437 E:2001-07 Test gases - Test pressures - Appliance categories
DIN EN 437 E:2017-02 Test gases - Test pressures - Appliance categories
DIN EN 60068-2-13:2000 Environmental testing - Part 2: Tests; test M: Low air pressure (IEC 60068-2-13:1983); German version EN 60068-2-13:1999
DIN V ENV 13050:2001 Curtain walling - Watertightness - Laboratory test under dynamic air pressure and water spray; German version ENV 13050:2000
DIN EN 437:2009 Test gases - Test pressures - Appliance categories(includes Amendment A1:2009); English version of DIN EN 437:2009-09
DIN EN ISO 22282-3 E:2008-01 Geotechnical Investigation and Test Site Hydraulic Testing Part 3: Hydrostatic Testing in Rock (Draft)
DIN EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure; German version EN 12155:2000
DIN EN 60068-2-41:2000 Environmental testing - Part 2: Tests; test Z/BM: Combined dry heat/low air pressure tests (IEC 60068-2-41:1976 + A1:1983); German version EN 60068-2-41:1999
DIN EN 60068-2-40:2000 Environmental testing - Part 2: Tests; test Z/AM: Combined cold/low air pressure tests (IEC 60068-2-40:1976 + A1:1983); German version EN 60068-2-40:1999

Standards Norway

NS-EN 437:2003 Test gases — Test pressures — Appliance categories
NS-EN 437:1993 Test gases — Test pressures — Appliance categories
NS-EN 437:2003+A1:2009 Test gases — Test pressures — Appliance categories
NS-EN 13050:2011 Curtain Walling — Watertightness — Laboratory test under dynamic condition of air pressure and water spray
NS-ENV 13050:2000 Curtain walling — Watertightness — Laboratory test under dynamic condition of air pressure and water spray

Spanish Association for Standardization (UNE)

UNE-EN 437:2003 Test gases - Test pressures - Appliance categories
AENOR UNE-EN 437+A1:2009 Test gases - Test pressures - Appliance categories
UNE 104481-3-2:2010 Test methods for membranes for waterproofing. Part: 3-2: Test for watertightness of waterproofing sheet joints using the pressure air method
UNE-EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray

Ente Nazionale Italiano di Unificazione

UNI EN 437:2021 Test gases - Test pressures - Appliance categories
UNI EN 437:2005 Test gases - Test pressures - Appliance categories
UNI EN 437:2009 Test gases - Test pressures - Appliance categories
UNI EN 437:2019 Test gases - Test pressures - Appliance categories
UNI EN ISO 10426-4:2005 Petroleum and natural gas industries - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure
UNI EN 86:1981 Methods of testing windows. Water tightness test under static pressure.
UNI ENV 13050:2002 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
UNI ISO 10100:2022 Hydraulic fluid power -- Cylinders -- Acceptance tests

Swedish Institute for Standards

SS-EN 437:1994 Test gases - Test pressures - Appliance categories
SS-EN 60068-2-41:2001 Environmental testing - Part 2: Tests - Test Z/BM: Combined dry heat/low air pressure tests

Danish Standards Foundation

DS/EN 437:1994 Test gasses-Test pressures-Appliance categories
DS/ISO 22282-4:2021 Geotechnical investigation and testing – Geohydraulic testing – Part 4: Pumping tests
DANSK DS/EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure
DS/EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
DS/EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure

PL-PKN

PN-EN 437-2021-09 E Test gases -- Test pressures -- Appliance categories

British Standards Institution (BSI)

BS EN 437:2003+A1:2009 Tests gases - Test pressures - Appliance categories
BS ISO 12500-4:2009 Filters for compressed air - Methods of test - Water CD-ROM
BS ISO 12500-4:2010 Filters for compressed air. Methods of test. Water CD-RO
BS EN 437:2003 Test gases - Test pressures - Appliance categories
BS ISO 8573-9:2004 Compressed air - Test methods for liquid water content
BS 5173-102-102.1:1985 Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests-Hydrostatic tests
BS EN 60512-11-11:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11k - Low air pressure
DD ENV 13050-2001 Curtain walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
BS ISO 10100:2001 Hydraulic fluid power. Cylinders. Acceptance tests

Association Francaise de Normalisation

NF D30-500:2009 Test gases - Test pressures - Appliance categories.
NF D30-500/IN1:2009 Test gases - Test pressures - Appliance categories.
NF P20-505:1980 METHODS OF TESTING WINDOWS. WATER TIGHTNESS TEST UNDER STATIC PRESSURE. (EUROPEAN STANDARD EN 86).
NF D30-500:1994 Test gases - Test pressures - Appliances categories.
NF C20-766*NF EN 60068-2-66:1995 Environmental testing. Part 2 : test methods. Test Cx : damp heat, steady state (unsatured pressurized vapour).
NF P28-105*NF EN 13050:2012 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
NF C20-713*NF EN 60068-2-13:1999 Environmental testing. Part 2 : tests. Test M : low air pressure.
FD E29-761:2014 Gas cylinders - Hydraulic bursting test
NF E29-761:1988 Gas cylinders. Hydraulic bursting test.
NF C20-741*NF EN 60068-2-41:2000 Environmental testing - Part 2 : tests - Test Z/BM : combined dry heat/low air pressure tests.
NF C20-713:1987 BASIC ENVIRONMENTAL TESTING PROCEDURES. TEST METHODS. TEST M : LOW AIR PRESSURE.
NF C20-713*NF EN IEC 60068-2-13:2021 Environmental testing - Part 2-13 : tests - Test M : low air pressure
NF P28-104*NF EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure
NF C20-740*NF EN 60068-2-40:2000 Environmental testing - Part 2 : tests - Test Z/AM : combined cold/low air pressure tests
NF P94-523-3*NF EN ISO 22282-3:2014 Geotechnical investigation and testing - Geohydraulic testing - Part 3 : water pressure tests in rock

RO-ASRO

STAS 9918-1974 Hydrostatic drives CYLINDERS Methods of testing
STAS 8362-1985 RUBBER HOSES Hydrostatic testing

Standard Association of Australia （SAA）

AS B257:1967 Hydrostatic stretch testing of compressed gas cylinders
AS 60068.2.41:2003 Environmental testing - Tests - Test Z/BM: Combined dry heat/low air pressure tests
AS 60068.2.39:2003 Environmental testing - Tests - Test Z/AMD: Combined sequential cold, low air pressure and damp heat test

European Committee for Electrotechnical Standardization（CENELEC）

EN 60068-2-13:1999 Environmental Testing - Part 2: Tests - Test M: Low Air Pressure

Canadian General Standards Board （CGSB)

CAN/CGSB 4.2 No. 26.1-M88(2013) Textiles test methods - Hydrostatic pressure test
CGSB 4.2 NO. 26.5-M89-CAN/CGSB-1989(R2004) Textile Test Methods Water Resistance - High-Pressure Penetration Test
CAN/CGSB 4.2 No. 26.3-2010 Test methods for textiles - Determination of water resistance - Hydrostatic pressure test

Compressed Gas Association (U.S.)

CGA C-1-2016 Methods for pressure testing compressed gas cylinders
CGA C-1-2009 Methods for pressure testing compressed gas cylinders

American National Standards Institute （ANSI)

ANSI/ISA 75.19.01-2013 Hydrostatic Testing of Control Valves

International Electrotechnical Commission (IEC)

IEC 60068-2-13:1983 Environmental testing. Part 2: Tests. Test M: Low air pressure
IEC 60068-2-13:2021 Environmental testing - Part 2-13: Tests - Test M: Low air pressure

BE-NBN

NBN-EN 437-1994 Test gases. Test pressures. Appliance catagories
NBN C 06-213-1977 Basic climate test and mechanical robustness test. Part 2: Tests, Test M: Low pressure

VN-TCVN

TCVN 7699-2-13-2007 Environmental testing.Part 2-13: Tests.Test M: Low air pressure

Bureau of Indian Standards

IS 5844-2014 Hydrostatic Stretch Testing of Compressed Gas Cylinders â€” Recommendations
IS 2106-5-1964 Environmental tests for electronic and electrical equipment-5 - Low air pressure test

Korean Agency for Technology and Standards (KATS)

KS A 0086-2002 Outgas test method using increasing pressure
KS C IEC 60068-2-13-2022 Environmental testing — Part 2-13: Tests —Test M: Low air pressure
KS C IEC 60068-2-13:2022 Environmental testing — Part 2-13: Tests —Test M: Low air pressure
KS C IEC 60695-10-2:2001 Fire hazard testing－Part 10：Guidance and test methods for the minimization of the effects of abnormal heat on electrotechnical products involved in fires－Section 2：Method for testing products made from non-metallic materials for resistance to heat using t
KS C IEC 60068-2-13:2014 Environmental testing — Part 2-13: Tests — Test M: Low air pressure
KS R 1056-2006 Air brake test procedure
KS C 0233-2001(2016) Environmental testing Part 2：Tests－ Test Z/AM：Combines cold/low air pressure tests
KS C 0234-2001(2016) Environmental testing Part 2：Tests－ Test Z/BM：Combined dry heat/low air pressure tests

American Society of Mechanical Engineers (ASME)

ASME SEC VIII D2 ART T-3-2001 Article T-3 Hydrostatic Tests
ASME B16.37-1980 Hydrostatic Testing of Control Valves

SE-SIS

SIS 24 82 11-1966 Rubber hose. Hydrostatic tests
SIS SS 02 71 26-1991 Geotechnical tests — Compression properties — Oedometer test, CRS-test — Cohesive soil

American Society for Testing and Materials (ASTM)

ASTM E1003-05 Standard Test Method for Hydrostatic Leak Testing

GB-REG

REG NASA-LLIS-0459-1996 Lessons Learned - Removing the gaseous nitrogen Pressure Control Valve 214(PCV-214) in the A-2 Test Stand Pressure Reducing Area (PRA)

Instrument Society of America (ISA)

ISA 75.19.01-2013 Hydrostatic Testing of Control Valves
ISA 75.19.01-2007 Hydrostatic Testing of Control Valves

ISA - International Society of Automation

ISA 75.19-1995 Hydrostatic Testing of Control Valves

National Association of Pipe Fabricators (NAPF)

PFI ES-4-2006 Hydrostatic Testing of Fabricated Piping
PFI ES-4-2013 HYDROSTATIC TESTING OF FABRICATED PIPING

Japanese Industrial Standards Committee (JISC)

JIS B 8377-1:2002 Fluid power systems and components -- Inspection and test of cylinders -- Part 1: Acceptance tests for pneumatic cylinders
JIS C 0029:1989 Basic environmental testing procedures Part 2: Tests, Test M: Low air pressure
JIS C 0031:1995 Environmental testing Part 2: Tests, Test Z/BM: Combined dry heat/low air pressure tests
JIS C 60068-2-40:1995 Environmental testing Part 2: Tests, Test Z/AM: Combined cold/low air pressure tests
JIS C 0030:1995 Environmental testing Part 2: Tests, Test Z/AM: Combined cold/low air pressure tests
JIS C 60068-2-41:1995 Environmental testing Part 2: Tests, Test Z/BM: Combined dry heat/low air pressure tests

Gosstandart of Russia

GOST 3845-1975 Metallic tubes. Hydraulic pressure testing method

IT-UNI

UNI 5122-1963 Fabric: Experiment. Hydrostatic pressure water seal test. limit

NL-NEN

NEN 1571-1967 Pressure test nipples for gas

Lithuanian Standards Office

LST EN 13050-2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
LST EN 12155-2002 Curtain walling - Watertightness - Laboratory test under static pressure

CZ-CSN

CSN 73 6612-1972 Prcssure frsls Tor walcr and irrignlioii pipelinos

European Committee for Standardization (CEN)

DD ENV 13050-2000 Curtain Walling - Watertightness - Laboratory Test under Dynamic Condition of Air Pressure and Water Spray
prEN 437-1990 Appliances using combustible gases; test gases, test pressure and categories of appliances

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 15821:2009 doorsets and windows - water-tightness test under dynamic pressure - cyclonic aspects

International Organization for Standardization (ISO)

ISO 1402:1974 Rubber hose — Hydrostatic testing
ISO 22282-3:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 3: Water pressure tests in rock

CEN - European Committee for Standardization

EN ISO 22282-3:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 3: Water pressure tests in rock

Others: